Solar-powered detection of organic dyes using nitrogen-doped N-TiO2/Ag2O nanorod arrays.

Organic pollutant detection has caused widespread concern regarding due to their potential environmental and human health risks. In this work, a nitrogen-doped titanium dioxide/silver oxide (N-TiO2/Ag2O) composite has been designed as a sensitive photoelectrochemical (PEC) monitoring platform of organic dyes. Sensitive determination relies on the outstanding PEC performance of N-TiO2/Ag2O. The improved PEC performance stems from the effective separation of photocarriers and the extended light response range provided by the narrowing bandgap and a p-n junction with N-TiO2/Ag2O. The N-TiO2/Ag2O electrode exhibits a photocurrent density of up to 2.2 mA/cm2, demonstrating three times increase compared with the photocurrent density observed with the pure TiO2 film. The linear detection range for rhodamine B (RhB), methylene blue (MB), and methyl orange (MO) is 0.2 ng/mL to 10 µg/mL with an ultrasensitive detection limit of 0.2 ng/mL without bias voltage. Due to the outstanding photocurrent density and sensitive response to organic pollutants, the N-TiO2/Ag2O PEC sensor provided a promising analytical method to detect environmental organic dyes.

Organic Photocathode Supported by Copper Nanosheets Array for Overall Water Splitting.

The Z-scheme overall solar water splitting is a mimic of natural photosynthesis to convert solar energy into chemical energy. Since the energy levels of most organic semiconductors match well with the hydrogen evolution potential, they have great application prospects as photocathodes in Z-scheme photoelectrochemical systems. However, due to the weak light absorption and difficult carrier separation, the photocurrent density and onset potential of organic photocathodes are still low. To solve these problems, we introduced a copper nanosheets array (Cu NSA) framework under organic layers to increase the surface reaction sites, improve the light absorption and enhance the distribution range of built-in electric field simultaneously. As a result, the photocurrent density and onset potential of poly(3-hexylthiophene) : [6,6]-phenyl-C61 -butyric acid (P3HT : PCBM) photocathode were enhanced significantly. The onset potential increased by 50 mV to 0.65 V vs. RHE, and the photocurrent density reached -1 mA cm-2 at 0 V vs. RHE, which was 18 times that of the sample without Cu NSA. The optimized photocathode was connected with titanium dioxide nanorods array photoanode in a tandem manner to realize the spontaneous overall water splitting. Without bias and co-catalyst, the photocurrent density was maintained at 110 µA cm-2 and the solar-to-fuel conversion efficiency was 0.14 % in neutral solution. These results provide a feasible method for optimizing the performance of organic photocathodes.