Facile preparation of polydopamine-coated imprinted polymers on the surface of SiO2 for estrone capture in milk samples.

Estrone molecularly imprinted polymers were synthesized through the self-polymerization of dopamine on the surface of silica gels, which had the characteristics of mild polymerization conditions, simple reaction procedure and good specific recognition ability for estrone. The estrone molecularly imprinted polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and nitrogen adsorption-desorption tests. The characterization confirmed that the imprinted polymers were successfully grafted on the surface of silica gels. Through investigating the adsorption performance, the prepared estrone molecularly imprinted polymers exhibited high adsorption capacity, fast mass transfer, as well as excellent selectivity toward estrone. The estrone molecularly imprinted polymers as the solid-phase extraction adsorbent coupled with high-performance liquid chromatography was developed to determine estrone from the milk samples. The developed estrone molecularly imprinted polymer solid-phase extraction with high-performance liquid chromatography method exhibited satisfactory specificity, precision, accuracy and good linearity relationship in the range of 0.2-20 µg/mL. The developed method is simple, fast, effective and high specificity method and it provides a new method to detect the residues of estrone in animal foods.

Preparation and evaluation of a molecularly imprinted sol-gel material as the solid-phase extraction adsorbents for the specific recognition of cloxacilloic acid in cloxacillin.

Highly selective molecularly imprinted polymers on the surface of silica gels were prepared by a sol-gel process and used as solid-phase extraction adsorbents for the specific recognition, enrichment and detection of cloxacilloic acid in cloxacillin. The obtained polymers were characterized by scanning electron microscopy, FTIR spectroscopy, nitrogen adsorption and desorption, elemental analysis and thermogravimetric analysis. The imprinted polymers not only possessed high adsorption capacity (6.5 µg/mg), but also exhibited fast adsorption kinetics (they adsorb 80% of the maximum amount within 20 min) and excellent selectivity (the imprinted factor was 3.6). A method using the imprinted polymers as solid-phase extraction adsorbents coupled with high-performance liquid chromatography was established with good specificity, linearity (r = 0.9962), precision (ranging from 0.5 to 6.7%), accuracy (ranging from 93.9 to 97.7%) and extraction recoveries (ranging from 78.8 to 89.8%). The limits of detection and quantification were 0.07 and 0.25 mg/g, respectively. This work could provide a promising method in the enrichment, extraction and detection of allergenic impurities in the manufacture, storage and application of cloxacillin.

[Preparation of surface molecularly imprinted polymers for penicilloic acid, and its adsorption properties].

On account of the specificity and reproducibility for the determination of penicilloic acid in penicillin, this study aims to prepare penicilloic acid imprinted polymers (PEOA-MIPs) by surface polymerization method at the surface of modified silica particles by using penicilloic acid (PEOA) as the template molecule, methacrylic acid (MAA) as the functional monomer, ethylene glycol dimethacrylate ( EGDMA) as the cross linker, and methanol/acetonitrile as the solvents. The synthesis conditions were optimized, and PEOA-MIPs had the best adsorption capacity when the molar ratio of template molecule/functional monomer was 1 :4, cross linking degree was 85% and the solvent ratio of methanol/acetonitrile was 1 :1 (v/v). The adsorption properties were evaluated by adsorption experiments, including the adsorption isotherms, kinetics and selectivity. The adsorption process between PEOA-MIPs and PEOA fitted the Langmuir adsorption isotherm with the maximum adsorption capacity of 122. 78 mg/g and the pseudo-second-order reaction kinetics with fast adsorption kinetics (the equilibrium time of 45 min). The as-synthesized PEOA-MIPs were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and thermal gravimetric analysis (TGA). The results indicated that the MIPs layer has been successfully grafted on the surface of SiO2 microparticles and the PEOA-MIPs had the excellent thermal stability. The PEOA-MIPs showed the highest selective recognition for PEOA. The PEOA-MIPs possess a high adsorption capacity, rapid mass-transfer rate and high selectivity to PEOA when compared with non-imprinted polymers (PEOA-NIPs). The PEOA-MIPs was expected to be used as the solid phase extraction medium and this study provides the potential applications for fast recognition and analysis of the penicilloic acid in penicillin.

Molecularly imprinted polymer cartridges coupled to liquid chromatography for simple and selective analysis of penicilloic acid and penilloic acid in milk by matrix solid-phase dispersion.

A simple, fast and sensitive method for determination of the degradation products of penicillin (penicilloic acid and penilloic acid) in milk samples has been developed by combining selective surface molecularly imprinted matrix solid-phase dispersion and high performance liquid chromatography (SMIPs-MSPD-HPLC). The selected dispersant SMIPs had high affinity for penicilloic acid and penilloic acid in milk matrix and the obtained extract was sufficiently clean for direct injection for HPLC analysis without any interference from the matrix. The proposed SMIPs-MSPD-HPLC method was validated for linearity, precision, accuracy, limit of detection and limit of quantitation. Linearity ranged from 0.04 to 4 µg g(-1) (correlation coefficient r(2) > 0.999). Recoveries of penicilloic acid from milk samples at different spiked levels were between 79.8 and 90.3%, with RSD values within 5.2-7.4%, and the limit of detection and limit of quantitation values were 0.04 and 0.13 µg g(-1), respectively. Recoveries of penilloic acid from milk samples at different spiked levels were between 77.4 and 86.2%, with RSD values within 3.1-6.4%, and the limit of detection and limit of quantitation values were 0.05 and 0.17 µg g(-1), respectively. The developed SMIPs-MSPD-HPLC method was successfully applied to direct determination of penicilloic acid and penilloic acid in milk samples.