Bending-Insensitive Intrinsically Flexible Ultraviolet Encoding Devices Based on Piezoelectric Nanogenerator-Supplied Liquid Crystalline Polymer Fabrics.

It is significantly challenging for state-of-the-art wearable electronics to stably monitor physicochemical signals under dynamic motions. Herein, a bending-insensitive, self-powered, and intrinsically flexible UV detector has been realized based on well-designed oriented composite fabrics, consisting of ionic liquid (IL)-containing liquid crystalline polymers (ILCPs) and piezoelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] nanogenerators. The novel composite fabrics establish effective UV illuminance-internal stress-electric signal conversion by coupling resistive and piezoelectric effects, with a fast response time of 190 ms. Particularly, benefiting from the intrinsic flexibility of composite fabrics, the ILCP/P(VDF-TrFE) device can maintain stable performance under dynamic bending even if the frequency is up to 2.5 Hz, with a bending insensitivity of less than 1% performance variation under 1.0 mW cm-2 UV light. Combined with the Internet of Things and the American Standard Code for Information Interchange (ASCII), wearable encoding electronics have been successfully implemented with a printing speed of 3.2 s per character under dynamic bending.

A Cut-and-Weld Process to 3D Architectures from Multiresponsive Crosslinked Liquid Crystalline Polymers.

Crosslinked liquid crystalline polymers (CLCPs) have garnered extensive attention in recent years for their significant values in the design of light-driven soft actuators. However, poor processabilities due to the insoluble and infusible crosslinked networks prevent their practical applications severely. In this study, a weldable azobenzene-containing CLCP is designed with photo- and humidity-responsive actuations, which enables a cut-and-weld process to 3D CLCP architectures. The tensile properties and stability are almost unchanged after welding, much better than those of the films pasted by common adhesive tapes. Meanwhile, the mechanisms of the welding process are clarified on the base of surface hydrogen bonding and further crosslinking. By taking advantage of the cut-and-weld process, a 3D "claw" integrated into a robotic arm is realized for grabbing millimeter-scale objects by remote control. This work enhances significantly not only the processability of CLCP films but also the utilization of leftover pieces, which provides an efficient approach to create functional 3D structures from film precursors for the potential application in the smart materials.

Liquid crystalline moiety-assisted perpendicular orientation of cylindrical domains within P4VP-b-PMA(Az) films with high aspect ratio.

Block copolymer (BCP) films with perpendicularly aligned cylindrical domains of high aspect ratio have important applications in diverse fields. However, an aspect ratio of the cylinders as high as 200 has rarely been reported so far. Here we demonstrate an efficient route to the formation of normally aligned P4VP cylinders with high aspect ratio surrounded by a matrix of azobenzene-containing block (PMA(Az)) via hierarchical self-assembly. A crisscross structure, consisting of parallelly aligned liquid crystalline (LC) layers and normally aligned self-assembly domains, is expected to assist the formation of well-defined nanostructures. The LC layers in the cylindrical films self-assemble to form smectic phase after solvent annealing, as confirmed by WAXD and UV-vis spectra. We found that the aspect ratio of the vertical P4VP cylinders is up to 200 and the film thickness reaches 6 µm. P4VP is a functional polymer, making this P4VP-b-PMA(Az) film more suitable for advanced filters, multi-nanochannels, nanolithography, and high-density storage media, etc.

Fusing multiple protein-protein similarity networks to effectively predict lncRNA-protein interactions.

BACKGROUND: Long non-coding RNA (lncRNA) plays important roles in many biological and pathological processes, including transcriptional regulation and gene regulation. As lncRNA interacts with multiple proteins, predicting lncRNA-protein interactions (lncRPIs) is an important way to study the functions of lncRNA. Up to now, there have been a few works that exploit protein-protein interactions (PPIs) to help the prediction of new lncRPIs. RESULTS: In this paper, we propose to boost the prediction of lncRPIs by fusing multiple protein-protein similarity networks (PPSNs). Concretely, we first construct four PPSNs based on protein sequences, protein domains, protein GO terms and the STRING database respectively, then build a more informative PPSN by fusing these four constructed PPSNs. Finally, we predict new lncRPIs by a random walk method with the fused PPSN and known lncRPIs. Our experimental results show that the new approach outperforms the existing methods. CONCLUSION: Fusing multiple protein-protein similarity networks can effectively boost the performance of predicting lncRPIs.

Ultrasonic-Excited Ultrafast Seamless Integration of Heterostructured Liquid Crystalline Elastomers for Multi-responsive Soft Actuators.

Multicomponent/heterostructured liquid crystalline elastomers (LCEs) have recently garnered extensive attention for the design of soft robots with high dexterity and flexibility. However, the reported integration strategies of LCEs seriously suffer from high welding temperature, long processing time, and poor joint quality. Herein, the high-efficiency seamless ultrasonic welding (UW) of reprogrammable silver nanowire-LCE composites (AgNW-LCEs) have been realized without any auxiliary reagents based on the dynamic silver-disulfide coordination interactions. The elaborate combination of silver-disulfide coordination interactions and UW technology establishes an effective double-network welding mechanism of AgNWs and dynamic LC networks due to the high-frequency vibration at the welding interface. During the UW process, monolithic AgNW-LCEs can be integrated into heterostructured actuators at room temperature for 0.68 s. Furthermore, the welded AgNW-LCEs demonstrate an exceptional strain healing efficiency of ∼100%, a stress healing efficiency of ∼85%, and a maintained orientation of the LC alignment. Taking advantage of the high-efficiency UW technology, the heterostructured AgNW-LCE actuators with different LC alignments or LC monomers have been successfully implemented for a multi-degree-of-freedom soft robotic arm and a time-modulated flower-mimic actuator. This work provides an efficient approach toward the development of multi-responsive entirely soft actuators based on smart polymers.

Azobenzene-containing liquid crystalline composites for robust ultraviolet detectors based on conversion of illuminance-mechanical stress-electric signals.

Wearable ultraviolet (UV) detectors have attracted considerable interest in the military and civilian realms. However, semiconductor-based UV detectors are easily interfered by elongation due to the elastic modulus incompatibility between rigid semiconductors and polymer matrix. Polymer detectors containing UV responsive moieties seriously suffer from slow response time. Herein, a UV illuminance-mechanical stress-electric signal conversion has been proposed based on well-defined ionic liquid (IL)-containing liquid crystalline polymer (ILCP) and highly elastic polyurethane (TPU) composite fabrics, to achieve a robust UV monitoring and shielding device with a fast response time of 5 s. Due to the electrostatic interactions and hydrogen bonds between ILs and LC networks, the ILCP-based device can effectively prevent the exudation of ILs and maintain stable performance upon stretching, bending, washing and 1000 testing cycles upon 365 nm UV irradiation. This work provides a generalizable approach toward the development of full polymer-based wearable electronics and soft robots.

Perpendicularly aligned nanodomains on versatile substrates via rapid thermal annealing assisted by liquid crystalline ordering in block copolymer films.

The highly ordered perpendicularly aligned cylindrical and lamellar microdomains within block copolymer (BCP) films have important applications in diverse fields. However, the fast normal orientation of self-assembled nanostructures on arbitrary substrates without tedious pre- and postprocessing has been a challenging issue in manufacturing miniaturized devices. Here, we outline the potential for extending the hierarchical self-assembly within azobenzene-containing PS-b-PMA(Az) films to inherently assist in the formation of normally aligned domains using a rapid thermal annealing process (140 °C for 5 min). Liquid crystalline (LC) mesogens in PS-b-PMA(Az) films self-assemble to form a parallelly aligned sematic phase after thermal annealing, as confirmed by grazing-incidence small-angle X-ray scattering (GISAXS), wide-angle X-ray diffraction (WAXD) and ultraviolet-visible (UV-vis) spectra. This sub-phase contributes to broadening of the PS-cylinder-phase window (0.083 ≤ f PS < 0.49) and ∼12 nm PS cylinder structures. Perpendicular cylinders or lamellae are observed on various substrates, such as silicon wafers, flexible polyethylene terephthalate (PET) sheets and conductive aluminum foils. Additionally, the good reactive ion etching (RIE) rate difference between the two blocks makes these BCPs more attractive for advancing the field of BCP lithographic applications for fabricating flexible microelectronic devices.

A Contact-Sliding-Triboelectrification-Driven Dynamic Optical Transmittance Modulator for Self-Powered Information Covering and Selective Visualization.

Triboelectrification-enabled self-powered flexible electronic/optical systems have aroused a new surge of interest in recent years. All-in-one integration of such a system, which could significantly improve its adaptability, operability, and portability, still remains a challenge due to the absence of suitable architectures and integration schemes. Herein, a previously reported self-powered optical switch (OS) is thoroughly remolded and upgraded to a fully integrated contact-sliding-triboelectrification-driven dynamic optical transmittance modulator (OTM). The OTM is constructed with a multilayered structure, comprising a transparent triboelectrification top layer, a SiO2 -spaced polymer dispersed liquid crystal (PDLC) intermediate layer, and a flexible transparent conductive substrate. The working mechanism is that an alternating electric field can be induced once contact-sliding occurs upon the OTM, rendering the PDLC layer immediately switching its initial translucent state to an instantaneous transparent state. As such, a decent dimming range with the relative transmitted light intensity from 0.17 to 0.72 can be achieved at low mechanical thresholds of contact pressure (≈20 kPa) and sliding velocity (≈0.3 m s-1 ). Moreover, for practical applications, demonstrations of information covering and selective visualization are successfully implemented without any extra optical elements nor external power supplies, explicitly showing great potential for the OTM in various self-powered optical interactive applications.

Formation of Anisotropic Liquid Crystalline Nanoparticles via Polymerization-Induced Hierarchical Self-Assembly.

Polymeric nanoparticles (NPs) containing liquid crystalline (LC) mesogens with tunable anisotropic morphologies have applications in various fields, but their preparation typically suffers from tedious and low-throughput approaches. Here we present an efficient route to the preparation of anisotropic morphologies of azobenzene-containing block copolymers (BCPs) at high solids content via a polymerization-induced hierarchical self-assembly in ethanol. Various anisotropic NPs, including cuboids, short belts, lamellae, and ellipsoidal vesicles, have been obtained in a remarkably broad range of BCP compositions. The NPs exhibit a smectic phase with ordered stripes when observed under TEM. This internal LC ordering plays a significant role on the formation of these intriguing anisotropic morphologies. Morphological transitions from anisotropic to isotropic spheres can be obtained upon UV illumination due to the photoresponsive properties of the azobenzene mesogens. This work significantly expands the scope of accessible morphologies in PISA and suggests that the under explored LC BCPs may have an impactful role in the PISA field.