MoS2 coupled with ball milling co-modified sludge biochar to efficiently activate peroxymonosulfate for neonicotinoids degradation: Dominant roles of SO4•-, 1O2 and surface-bound radicals.

An efficient catalyst of molybdenum disulfide (MoS2) coupled with ball milling modified sludge biochar (BMSBC) was prepared to efficiently activate peroxymonosulfate (PMS) for neonicotinoids elimination. As expected, 95.1% of imidacloprid (IMI) was degraded by PMS/BMSBC system within 60 min and it was accompanied by the outstanding mineralization rate of 71.9%. The superior pore structures, rich defects, oxygen-containing functional groups and grafted MoS2 on BMSBC offered excellent activation performance for PMS. The influencing factor experiments demonstrated that PMS/BMSBC system performed high anti-interference to wide pH range and background constituents (e.g., inorganic ions and humic acid). Quenching experiments and electron paramagnetic resonance analysis revealed that SO4•-, 1O2, and surface-bound radicals played critical roles in IMI degradation. Electron donors on biochar activated PMS, producing surface radicals. The lone pair electrons within the Lewis basic site of C=O on BMSBC enhanced PMS decomposition by facilitating the cleavage of the -O-O- bond in PMS to release 1O2. The activation process of PMS by MoS2 accelerated the oxidation of Mo (IV) to Mo (VI) to generate SO4•-. Based on the transformed products (TPs), four degradation pathways of IMI in PMS/BMSBC system were suggested, and all TPs toxicity levels were lower than that of IMI by ECOSAR analysis. Additionally, BMSBC exhibited outstanding sustainable catalytic activity towards PMS activation with the well accepted degradation rate of 71.3% for IMI even after five reuse cycles. PMS/BMSBC system also exhibited satisfactory degradation rates (>71.8%) for IMI in various real waters (e.g., sewage effluent and livestock wastewater). Furthermore, PMS/BMSBC system also offered a favorable broad-spectrum elimination performance for other typical neonicotinoids (e.g., thiamethoxam, clothianidin, thiacloprid) with the degradation rates over 98%. This study has developed a desirable neonicotinoids purification technology in view of its high degradation/mineralization rate, outstanding detoxification performance, satisfied anti-interference to ambient conditions and sustainable sludge management.

Comparing different data sources by examining the associations between surrounding greenspace and children's weight status.

BACKGROUND: Studies on the association between surrounding greenspace and being overweight in childhood show inconsistent results, possibly because they differ widely in their definition and measurement of surrounding greenspace. Our aim was to evaluate whether the association of greenspace with being overweight depends on the measurement of greenspace in different data sources. METHODS: Based on data from the school entry examinations of 22,678 children in the city of Hannover, Germany, from 2010 to 14, the association between greenspace availability and overweight was examined. Three different sources of greenspace availability were derived for a set of 51 areas of the city: The Normalized Difference Vegetation Index (NDVI), the OpenStreetMap (OSM) dataset, and the European Urban Atlas (UA) dataset. Agreement between the indicators on the quantity of greenspace coverage was compared. The association with children's BMI z-score, including potential interaction terms, was assessed using multilevel regression analysis. RESULTS: Greenspace availability per district area derived by NDVI was on average 42%, by OSM 29% and UA 22%, with OSM and UA being strongly correlated. Only the greenspace availability derived by NDVI showed an association with children's BMI z-score: The higher the greenspace availability was, the lower the BMI. The trend of association was higher for boys and migrant children than for girls and non-migrants and was restricted to the highest levels of greenspace availability. CONCLUSIONS: Associations of greenspace with children's weight status depend on the greenspace measurement chosen. Surrounding greenspace was measured more comprehensively by NDVI. Data sources based on land use categories such as UA and OSM may be less suitable to reflect surrounding greenspace relevant for health outcomes. Potential mechanisms warrant further analysis and investigation.

Extraction Behavior of Acidic Phosphorus-Containing Compounds to Some Metal Ions: A Combination Research of Experimental and Theoretical Investigations.

To provide feasible methods for the extraction of valuable metals from spent batteries or low-grade primary ores, the extraction behavior of some representative acidic phosphorus-containing compounds (APCCs) as extractants is evaluated from the perspective of experimental and theoretical investigations in this work. Aqueous solutions containing five metal ions, Ca(II), Co(II), Mg(II), Mn(II), and Ni(II), were made to simulate leaching liquids, and the extraction of these metals was investigated. A simplified calculated model was used to evaluate the interaction between each extractant and metal ions. The calculation results agree well with the experimental tests in trend. This work not only provides potential extractants for the extraction of valuable metals from spent batteries or low-grade primary ores but also demonstrates the practicability of the simplified calculation model.

The key challenges and critical success factors of blockchain implementation: Policy implications for Singapore's maritime industry.

Blockchain has the potential to improve the efficiency and transparency of maritime businesses and operations. Nevertheless, few studies have been conducted to identify the key challenges and critical success factors (CSFs) of blockchain implementation in the maritime industry. A case study approach based on Singapore's maritime industry is adopted. Four interviews are conducted to establish the face validity of the survey questionnaire before data are collected from 30 maritime professionals from Singapore's maritime industry. In addition to analytic hierarchical process (AHP), a fishbone diagram and PESTEL analysis are also adopted to organize and discuss the results. The results show that there are six key challenges and six CSFs for blockchain implementation. Using a fishbone diagram, the six identified challenges along with 13 personal concerns are categorized into five dimensions related to people, methods, organization, external environment, and technology. The CSFs are sufficient capital, staff training, ease of local legislation, support from the shipping community, support from the senior management, and professional consultation and assistance. This study implicates marine policy formulation in relation to subsidies and investments, blockchain talent and knowledge acquisition, and workforce training and education to accelerate blockchain implementation in the maritime industry.

Variation of Suspended Particles in the Bottom Layer of the East China Sea with Data from Seafloor Observatory.

The in situ scattering and transmissometry laser (LISST-100X), equipped with an acoustic wave and current (AWAC) meter and conductivity, temperature, and depth (CTD) instruments over the seabed in the East China Sea, was used to monitor the variation in suspended particles in the bottom sea layer, including particle size distribution (PSD) and volume concentration. The power law approximation was tested to describe the variability in PSD based on the field data. The results show that the power law was robust in processing continuous data, accompanied with the same optimal reference particle size (~63 µm) and little change in the corresponding exponent (~3.4) in both periods. Suspended particles were divided into three types: macroflocs (>133 µm), microflocs (36-133 µm), and single grains (<36 µm). Particle sizes were coarse during the two seasons, with macroflocs representing more than 60% of all the suspended particles, especially in February, when the particle size spectra were usually open-ended. Results from the harmonic analysis method indicate that tidal-induced resuspension and advection are the major reasons for the diurnal dynamics of sediments. Due to the tidal asymmetry in the region, we only found one mode in volume concentration at the moment of maximum velocity. However, the ratios of macroflocs were bimodal, with maximum floods and ebbs in one tidal cycle in February, when the higher mode at the maximum ebbs may be contributed to by the flocculation of finer particles considering the decreasing ratios of finer particles. Due to the enhanced stratification and the clean barrier built up by the Taiwan Warm Current in the southeast corner, the significant daily variation in suspended particles observed in February weakened in September. The influence of waves was uncertain, although the correlation coefficient between significant wave height and volume concentration was about 64% in February.

Long-Lived Room-Temperature Phosphorescence for Visual and Quantitative Detection of Oxygen.

An unconventional organic molecule (TBBU) showing obvious long-lived room temperature phosphorescence (RTP) is reported. X-ray single crystal analysis demonstrates that TBBU molecules are packed in a unique fashion with side-by-side arranged intermolecular aromatic rings, which is entirely different from the RTP molecules reported to date. Theoretical calculations verify that the extraordinary intermolecular interaction between neighboring molecules plays an important role in RTP of TBBU crystals. More importantly, the polymer film doped with TBBU inherits its distinctive RTP property, which is highly sensitive to oxygen. The color of the doped film changes and its RTP lifetime drops abruptly through a dynamic collisional quenching mechanism with increasing oxygen fraction, enabling visual and quantitative detection of oxygen. Through analyzing the grayscale of the phosphorescence images, a facile method is developed for rapid, visual, and quantitative detection of oxygen in the air.

Migration background and childhood overweight in the Hannover Region in 2010-2014: a population-based secondary data analysis of school entry examinations.

Overweight and obesity constitute a global epidemic with rates that are increasing rapidly in children. The aim of the present study was to examine ethnic differences in the prevalence of overweight in pre-school children in a multicultural context. Data were collected from a compulsory school entry examination in the Hannover Region, Germany (n = 50,716) from 2010 to 2014. The prevalence of overweight (including pre-obesity and obesity status) and obesity was estimated using a German national reference. The migration status of the children was based on the parent's migration history. Multivariable logistic and hierarchical multinomial regression analyses were performed to identify factors associated with the overweight, pre-obesity, and obesity status. The prevalence of overweight was significantly higher among migrant children (12.7%) than among the non-migrant children (6.9%). After adjusting for socioeconomic and child development variables, migration background was strongly associated with weight status. The Turkish migrant children showed the highest odds of being pre-obesity (OR 2.05, 95%CI 1.7-2.56) and obesity (OR 2.09, 95%CI 1.67-2.77) compared to non-migrant children. CONCLUSION: Ethnic and social inequalities exist in childhood overweight among pre-school children in the Hannover Region. Thus, appropriate interventions targeting high-risk migrant groups are needed. What is Known: • The current trend of prevalence rates in Germany for overweight and obesity of pre-school children is becoming stable. • Prevalence of overweight and obesity is clearly higher among migrant children than among non-migrant children. What is New: • This article reveals ethnic variance among different migrant groups. • Turkish migrant children have a higher rate of prevalence even compared to other migrant groups. • Length of child day care attendance fails to exert a strong influence on overweight after adjusting for socio-economic and child development variables.

A Data Quality Control Method for Seafloor Observatories: The Application of Observed Time Series Data in the East China Sea.

With the construction and deployment of seafloor observatories around the world, massive amounts of oceanographic measurement data were gathered and transmitted to data centers. The increase in the amount of observed data not only provides support for marine scientific research but also raises the requirements for data quality control, as scientists must ensure that their research outcomes come from high-quality data. In this paper, we first analyzed and defined data quality problems occurring in the East China Sea Seafloor Observatory System (ECSSOS). We then proposed a method to detect and repair the data quality problems of seafloor observatories. Incorporating data statistics and expert knowledge from domain specialists, the proposed method consists of three parts: a general pretest to preprocess data and provide a router for further processing, data outlier detection methods to label suspect data points, and a data interpolation method to fill up missing and suspect data. The autoregressive integrated moving average (ARIMA) model was improved and applied to seafloor observatory data quality control by using a sliding window and cleaning the input modeling data. Furthermore, a quality control flag system was also proposed and applied to describe data quality control results and processing procedure information. The real observed data in ECSSOS were used to implement and test the proposed method. The results demonstrated that the proposed method performed effectively at detecting and repairing data quality problems for seafloor observatory data.

Lysergic acid diethylamide causes photoreceptor cell damage through inducing inflammatory response and oxidative stress.

Lysergic acid diethylamide (LSD), a classical hallucinogen, was used as a popular and notorious substance of abuse in various parts of the world. Its abuse could result in long-lasting abnormalities in retina and little is known about the exact mechanism. This study was to investigate the effect of LSD on macrophage activation state at non-toxic concentration and its resultant toxicity to photoreceptor cells. Results showed that cytotoxicity was caused by LSD on 661 W cells after co-culturing with RAW264.7 cells. Treatment with LSD-induced RAW264.7 cells to the M1 phenotype, releasing more pro-inflammatory cytokines, and increasing the M1-related gene expression. Moreover, after co-culturing with RAW264.7 cells, significant oxidative stress in 661 W cells treated with LSD was observed, by increasing the level of malondialdehyde (MDA) and reactive oxygen species (ROS), and decreasing the level of glutathione (GSH) and the activity of superoxide dismutase (SOD). Our study demonstrated that LSD caused photoreceptor cell damage by inducing inflammatory response and resultant oxidative stress, providing the scientific rationale for the toxicity of LSD to retina.

Piezotronic effect in solution-grown p-type ZnO nanowires and films.

Investigating the piezotronic effect in p-type piezoelectric semiconductor is critical for developing a complete piezotronic theory and designing/fabricating novel piezotronic applications with more complex functionality. Using a low temperature solution method, we were able to produce ultralong (up to 60 µm in length) Sb doped p-type ZnO nanowires on both rigid and flexible substrates. For the p-type nanowire field effect transistor, the on/off ratio, threshold voltage, mobility, and carrier concentration of 0.2% Sb-doped sample are found to be 10(5), 2.1 V, 0.82 cm(2)·V(-1)·s(-1), and 2.6 × 10(17) cm(-3), respectively, and the corresponding values for 1% Sb doped samples are 10(4), 2.0 V, 1.24 cm(2)·V(-1)·s(-1), and 3.8 × 10(17) cm(-3). We further investigated the universality of piezotronic effect in the as-synthesized Sb-doped p-type ZnO NWs and reported for the first time strain-gated piezotronic transistors as well as piezopotential-driven mechanical energy harvesting based on solution-grown p-type ZnO NWs. The results presented here broaden the scope of piezotronics and extend the framework for its potential applications in electronics, optoelectronics, smart MEMS/NEMS, and human-machine interfacing.

Toward large-scale energy harvesting by a nanoparticle-enhanced triboelectric nanogenerator.

This article describes a simple, cost-effective, and scalable approach to fabricate a triboelectric nanogenerator (NG) with ultrahigh electric output. Triggered by commonly available ambient mechanical energy such as human footfalls, a NG with size smaller than a human palm can generate maximum short-circuit current of 2 mA, delivering instantaneous power output of 1.2 W to external load. The power output corresponds to an area power density of 313 W/m(2) and a volume power density of 54,268 W/m(3) at an open-circuit voltage of ~1200 V. An energy conversion efficiency of 14.9% has been achieved. The power was capable of instantaneously lighting up as many as 600 multicolor commercial LED bulbs. The record high power output for the NG is attributed to optimized structure, proper materials selection and nanoscale surface modification. This work demonstrated the practicability of using NG to harvest large-scale mechanical energy, such as footsteps, rolling wheels, wind power, and ocean waves.

Are Socioeconomic Factors Associated With Atrial Fibrillation Sex-Dependent? A Narrative Review.

Atrial fibrillation (AF), the most prevalent cardiac arrhythmia, poses a significant public health and economic burden. Although socioeconomic factors such as income and education have been implicated in AF incidence and outcomes, the potential sex-specific associations remained underexplored. This narrative review aimed to fill this gap by synthesizing existing literature on the sex-specific impact of socioeconomic factors on AF incidence, treatment, and outcome. Among these socioeconomic factors, we identified income and education as the most frequently cited determinants. Nevertheless, the magnitude and direction of these sex differences remained inconsistent across studies. The review uncovered that many studies did not include sex in the analysis when assessing the impact of socioeconomic factors on AF. We highlighted that there is a paucity of studies employing sex-stratified reporting and sex interaction analyses, thereby hindering a deeper understanding of these relationships.

Sunlight-Activated Hour-Long Afterglow from Transparent and Flexible Polymers.

Afterglow materials featuring long emission durations ranging from milliseconds to hours have garnered increasing interest owing to their potential applications in sensing, bioimaging, and anti-counterfeiting. Unfortunately, polymeric materials rarely exhibit afterglow properties under ambient conditions because of the rapid nonradiative decay rate of triplet excitons. In this study, hour-long afterglow (HLA) polymer films are fabricated using a facile molecular doping strategy. Flexible and transparent polymer films emitted a bright afterglow lasting over 11 h at room temperature in air, which is one of the best performances among the organic afterglow materials reported to date. Intriguingly, HLA polymer films can be activated by sunlight, and their cyan afterglow in air can be readily observed by the naked eye. Moreover, the HLA color of the polymer films could be tuned from cyan to red through the Förster resonance energy transfer mechanism. Their application in flexible displays and information storage has also been demonstrated. With remarkable advantages, including an hour-long and bright afterglow, tunable afterglow colors, superior flexibility and transparency, and ease of fabrication, the HLA polymer paves the way for the practical application of afterglow materials in the engineering sector.

Sex, Gender, and Stroke Recovery: Functional Limitations and Inpatient Care Needs in Canadian and European Survivors.

BACKGROUND: Stroke is a leading cause of long-term disability among survivors. Past literature already investigated the biological sex differences in stroke outcome, still limited work on gender differences is published. Therefore, the study aimed at investigating whether biological sex and sociocultural gender of survivors play a role as determinants of disability and quality of life among stroke survivors across Europe and Canada. METHODS: Data were gathered from the European Health Information Survey (EHIS, n=316,333) and Canadian Community Health Survey (CCHS, n=127,462) datasets. Main outcomes of interest were disability, assessed through evaluating the impairment of Activities of Daily Living (ADL) and Instrumental Activities of Daily Living (iADL), and inpatient care needs, such as hospitalization or institutionalization. Multivariate logistic regression models were utilized to identify factors independently associated with outcomes. Federated analysis was conducted for cross-country comparisons. Data were adjusted for the country-specific Gender Inequality Index (GII), with higher score corresponding to more gender inequality towards femalesResults: Female survivors showed greater impairments in iADL (OR=1.73, 95% CI 1.53 - 1.96) and ADL (OR=1.25, 95% CI 1.09-1.44), without a corresponding increase in inpatient care needs. Socioeconomic factors such as marital status and income level were significant predictors of disability, with low income and being single/divorced associated with higher risks. The impact of sex was more pronounced in countries with higher GII, indicating the influence of gender inequality on stroke outcomes. INTERPRETATION: The findings highlight the significant impact of biological sex and gender-related social determinants on post-stroke disability, with female sex and unfavorable socioeconomic conditions being associated with worse outcomes.

Explicit Abnormality Extraction for Unsupervised Motion Artifact Reduction in Magnetic Resonance Imaging.

Motion artifacts compromise the quality of magnetic resonance imaging (MRI) and pose challenges to achieving diagnostic outcomes and image-guided therapies. In recent years, supervised deep learning approaches have emerged as successful solutions for motion artifact reduction (MAR). One disadvantage of these methods is their dependency on acquiring paired sets of motion artifact-corrupted (MA-corrupted) and motion artifact-free (MA-free) MR images for training purposes. Obtaining such image pairs is difficult and therefore limits the application of supervised training. In this paper, we propose a novel UNsupervised Abnormality Extraction Network (UNAEN) to alleviate this problem. Our network is capable of working with unpaired MA-corrupted and MA-free images. It converts the MA-corrupted images to MA-reduced images by extracting abnormalities from the MA-corrupted images using a proposed artifact extractor, which intercepts the residual artifact maps from the MA-corrupted MR images explicitly, and a reconstructor to restore the original input from the MA-reduced images. The performance of UNAEN was assessed by experimenting with various publicly available MRI datasets and comparing them with state-of-the-art methods. The quantitative evaluation demonstrates the superiority of UNAEN over alternative MAR methods and visually exhibits fewer residual artifacts. Our results substantiate the potential of UNAEN as a promising solution applicable in real-world clinical environments, with the capability to enhance diagnostic accuracy and facilitate image-guided therapies. Our codes are publicly available at https://github.com/YuSheng-Zhou/UNAEN.

Functional electrical stimulation by nanogenerator with 58 V output voltage.

We demonstrate a new type of integrated nanogenerator based on arrays of vertically aligned piezoelectric ZnO nanowires. The peak open-circuit voltage and short-circuit current reach a record high level of 58 V and 134 µA, respectively, with a maximum power density of 0.78 W/cm(3). The electric output was directly applied to a sciatic nerve of a frog, inducing innervation of the nerve. Vibrant contraction of the frog's gastrocnemius muscle is observed as a result of the instantaneous electric input from the nanogenerator.

Triboelectric-generator-driven pulse electrodeposition for micropatterning.

By converting ambient energy into electricity, energy harvesting is capable of at least offsetting, or even replacing, the reliance of small portable electronics on traditional power supplies, such as batteries. Here we demonstrate a novel and simple generator with extremely low cost for efficiently harvesting mechanical energy that is typically present in the form of vibrations and random displacements/deformation. Owing to the coupling of contact charging and electrostatic induction, electric generation was achieved with a cycled process of contact and separation between two polymer films. A detailed theory is developed for understanding the proposed mechanism. The instantaneous electric power density reached as high as 31.2 mW/cm(3) at a maximum open circuit voltage of 110 V. Furthermore, the generator was successfully used without electric storage as a direct power source for pulse electrodeposition (PED) of micro/nanocrystalline silver structure. The cathodic current efficiency reached up to 86.6%. Not only does this work present a new type of generator that is featured by simple fabrication, large electric output, excellent robustness, and extremely low cost, but also extends the application of energy-harvesting technology to the field of electrochemistry with further utilizations including, but not limited to, pollutant degradation, corrosion protection, and water splitting.

Pyroelectric nanogenerators for harvesting thermoelectric energy.

Harvesting thermoelectric energy mainly relies on the Seebeck effect that utilizes a temperature difference between two ends of the device for driving the diffusion of charge carriers. However, in an environment that the temperature is spatially uniform without a gradient, the pyroelectric effect has to be the choice, which is based on the spontaneous polarization in certain anisotropic solids due to a time-dependent temperature variation. Using this effect, we experimentally demonstrate the first application of pyroelectric ZnO nanowire arrays for converting heat energy into electricity. The coupling of the pyroelectric and semiconducting properties in ZnO creates a polarization electric field and charge separation along the ZnO nanowire as a result of the time-dependent change in temperature. The fabricated nanogenerator has a good stability, and the characteristic coefficient of heat flow conversion into electricity is estimated to be ∼0.05-0.08 Vm(2)/W. Our study has the potential of using pyroelectric nanowires to convert wasted energy into electricity for powering nanodevices.

Psychological antecedents of telehealth acceptance: A technology readiness perspective.

The ongoing coronavirus pandemic has been threatening the healthcare system. In this context, telehealth is a potential solution to deliver effective and safe health care to the public. To facilitate the application and acceptance of telehealth, a good understanding of psychological determinants is of great importance. Therefore, this study aims to examine the public's positive and negative mindsets towards telehealth. A theoretical model was established by employing the technology readiness model and perceived value theory. To empirically test the relationships between constructs, a total of 500 responses from residents in Singapore were collected; thereafter, structural equation modeling was performed. The results indicate that discomfort negatively impacts perceived value whereas optimism and innovativeness positively impact users' perceived value. Further, perceived value positively impacts the acceptance of telehealth via attitude. Demographic factors (i.e. internet literacy, age, education) can also influence certain aspects of technology readiness (e.g. innovativeness, optimism). Moreover, social influence is an important moderator between perceived value and the acceptance of telehealth. The empirical findings enhance the understanding of users' psychology concerning telehealth and provide policy recommendations regarding the development of telehealth to improve public health.

Influence of Density Gradient on the Compression of Functionally Graded BCC Lattice Structure.

In this paper, five grading functional gradient lattice structures with a different density perpendicular to the loading direction were proposed, and the surface morphology, deformation behavior, and compression properties of the functional gradient lattice structures prepared by selective laser melting (SLM) with Ti-6Al-4V as the building material were investigated. The results show that the characteristics of the laser energy distribution of the SLM molding process make the spherical metal powder adhere to the surface of the lattice structure struts, resulting in the actual relative density of the lattice structure being higher than the designed theoretical relative density, but the maximum error does not exceed 3.33%. With the same relative density, all lattice structures with density gradients perpendicular to the loading direction have better mechanical properties than the uniform lattice structure, in particular, the elastic modulus of LF, the yield strength of LINEAR, and the first maximum compression strength of INDEX are 28.99%, 16.77%, and 14.46% higher than that of the UNIFORM. In addition, the energy absorption per unit volume of the INDEX and LINEAR is 38.38% and 48.29% higher, respectively, than that of the UNIFORM. Fracture morphology analysis shows that the fracture morphology of these lattice structures shows dimples and smooth planes, indicating that the lattice structure exhibits a mixed brittle and ductile failure mechanism under compressive loading. Finite element analysis results show that when the loading direction is perpendicular to the density gradient-forming direction, the higher density part of the lattice structure is the main bearing part, and the greater the density difference between the two ends of the lattice structure, the greater the elastic modulus.