RESUMEN
We demonstrate an efficient wavelength-selectable output in the attractive deep-red spectral region from an intracavity frequency converted Nd:YLF/KGW Raman laser. Driven by an acousto-optic Q-switched 1314â nm Nd:YLF laser, two first-Stokes waves at 1461 and 1490â nm were generated owing to the bi-axial properties of KGW crystal. By incorporating intracavity sum-frequency generation and second-harmonic generation with an angle-tuned bismuth borate (BIBO) crystal, four discrete deep-red laser emission lines were yielded at the wavelengths of 692, 698, 731, and 745â nm. Under the incident pump power of 50 W and the repetition rate of 4 kHz, the maximum average output powers of 2.4, 2.7, 3.3, and 3.6 W were attained with the pulse durations of 3.4, 3.2, 4.3, and 3.7â ns, respectively, corresponding to the peak powers up to 177, 209, 190, and 245â kW. The results indicate that the Nd:YLF/KGW Raman laser combined with an angle-adjusted BIBO crystal provides a reliable and convenient approach to achieve the selectable multi-wavelength deep-red laser with short pulse duration and high peak power.
RESUMEN
High beam quality 588â nm radiation was realized based on a frequency-doubled crystalline Raman laser. The bonding crystal of YVO4/Nd:YVO4/YVO4 was used as the laser gain medium, which can accelerate the thermal diffusion. The intracavity Raman conversion and the second harmonic generation were realized by a YVO4 crystal and an LBO crystal, respectively. Under an incident pump power of 49.2 W and a pulse repetition frequency of 50 kHz, the 588â nm power of 2.85 W was obtained with a pulse duration of 3â ns, corresponding to a diode-to-yellow laser conversion efficiency of 5.75% and a slope efficiency of 7.6%. Meanwhile, a single pulse's pulse energy and peak power were 57 µJ and 19â kW, respectively. The severe thermal effects of the self-Raman structure were overcome in the V-shaped cavity, which has excellent mode matching, and combined with the self-cleaning effect of `Raman scattering, the beam quality factor M2 was effectively improved, which was measured optimally to be Mx 2 = 1.207, and My 2 = 1.200, with the incident pump power being 49.2 W.
RESUMEN
We report on a high-repetition-rate and high-beam-quality all-solid-state nanosecond pulsed deep-red laser source by intracavity second harmonic generation of the actively Q-switched Nd:YVO4/KGW Raman laser. The polarization of the 1342â nm fundamental laser was aligned with the Ng and Nm axes of KGW crystal for accessing the eye-safe Raman lasers at 1496 and 1526â nm, respectively. With the aid of the elaborately designed V-shaped resonator and the composite Nd:YVO4 crystal, excellent mode matching and good thermal diffusion have been confirmed. Under an optimal pulse repetition frequency of 25 kHz, the average output powers of the Raman lasers at 1496 and 1526â nm were measured to be 3.7 and 4.9 W with the superior beam quality factor of M2 = 1.2, respectively. Subsequently, by incorporating a bismuth borate (BIBO) crystal, the deep-red laser source was able to lase separately two different spectral lines at 748 and 763â nm, yielding the maximum average output powers of 2.5 and 3.2 W with the pulse durations of 15.6 and 11.3â ns, respectively. The resulting beam quality was determined to be near-diffraction-limited with M2 = 1.28.
RESUMEN
We demonstrated an eye-safe diamond Raman laser intra-cavity pumped by the 1.3 µm fundamental field for the first time, to the best of our knowledge. The first-Stokes laser at 1634 nm was converted from the 1342 nm fundamental laser, which was produced by an in-band pumped double-end diffusion-bonded a-cut Nd:YVO4 crystal. Under an incident pump power of 21.2 W and an optimal pulse repetition frequency of 25 kHz, the maximum average output power of 2.0 W was obtained with the pulse duration of 5.7 ns and the peak power of 14 kW. The first-Stokes emission was found to be near diffraction limited (M2 ≈ 1.3) and to have a narrow linewidth (â¼0.05 nm FWHM; instrument limited).
RESUMEN
We demonstrated a deep-red laser source by intracavity frequency-doubled crystalline Raman laser for the first time, to the best of our knowledge. The actively Q-switched 1314 nm Nd:LiYF4 laser was first converted to the eye-safe Raman laser using a KGd(WO4)2 (KGW) crystal, which was subsequently frequency-doubled in a bismuth borate crystal. Benefiting from the KGW bi-axial properties, the deep-red laser source was able to lase separately at two different spectral lines at 730 and 745 nm. Under an optimal repetition rate of 4 kHz, the maximum average powers of 1.7 and 2.0 W were attained with good beam quality of M2≈1.7. The corresponding pulse durations were determined to be 3.0 and 2.8 ns with the peak powers up to approximately 140 and 180 kW, respectively.
RESUMEN
Immune checkpoint blockade therapy has become a first-line treatment in various cancers. But there are only a small percent of colorectal patients responding to PD-1/PD-L1 blockage immunotherapy. How to increase their treatment efficacy is an urgent and clinically unmet need. It is acknowledged that immunogenic cell death (ICD) induced by some specific chemotherapy can enhance antitumor immunity. Chemo-based combination therapy can yield improved outcomes by activating the immune system to eliminate the tumor, compared with monotherapy. Here, we develop a PD-L1-targeting immune liposome (P-Lipo) for co-delivering irinotecan (IRI) and JQ1, and this system can successfully elicit antitumor immunity in colorectal cancer through inducing ICD by IRI and interfering in the immunosuppressive PD-1/PD-L1 pathway by JQ1. P-Lipo increases intratumoral drug accumulation and promotes DC maturation, and thereby facilitates adaptive immune responses against tumor growth. The remodeling tumor immune microenvironment was reflected by the increased amount of CD8+ T cells and the release of IFN-γ, and the reduced CD4+Foxp3+ regulatory T cells (Tregs). Collectively, the P-Lipo codelivery system provides a chemo-immunotherapy strategy that can effectively remodel the tumor immune microenvironment and activate the host immune system and arrest tumor growth.
Asunto(s)
Protocolos de Quimioterapia Combinada Antineoplásica/farmacología , Azepinas/farmacología , Inhibidores de Puntos de Control Inmunológico/farmacología , Irinotecán/farmacología , Neoplasias/tratamiento farmacológico , Neoplasias/metabolismo , Triazoles/farmacología , Animales , Antígeno B7-H1/metabolismo , Línea Celular Tumoral , Femenino , Ratones , Ratones Endogámicos BALB C , Receptor de Muerte Celular Programada 1 , Linfocitos T Reguladores/metabolismo , Microambiente Tumoral/efectos de los fármacosRESUMEN
We demonstrated a narrowband eye-safe intracavity Raman laser by incorporating a fused silica etalon into the fundamental resonator. The KGd(WO4)2 (KGW) Raman laser was pumped by an actively Q-switched Nd:YLF laser at 1314 nm. Thanks to the KGW bi-axial properties, two distinct eye-safe Raman lasers operating at 1461 and 1490 nm were obtained separately by rotation of the KGW crystal. At an optimized pulse repetition frequency of 4 kHz, the maximum average output powers of 3.6 and 4.0 W were achieved with the peak powers up to approximately 330 and 480 kW, respectively. The eye-safe Stokes emissions were narrow linewidth (â¼0.05 nm FWHM; measurement limited) and near diffraction limited (M2 < 1.4). The powerful narrowband eye-safe Raman lasers are of interest for applications as diverse as laser range finding, scanning lidar and remote sensing.
RESUMEN
An actively Q-switched eye-safe orthogonally-polarized dual-wavelength intracavity Raman laser was demonstrated for the first time, to the best of our knowledge. The gain balanced dual-wavelength operation at 1314 and 1321 nm within an in-band pumped Nd:YLF laser was realized by slightly titling the cavity mirrors. Owing to the KGW bi-axial properties, two sets of simultaneous orthogonally-polarized dual-wavelength Raman lasers at 1470, 1490 nm and 1461, 1499 nm were achieved by simply rotating the KGW crystal for 90°, respectively. With an incident pump power of 30 W and an optimized pulse repetition frequency of 5 kHz, the maximum dual-wavelength Raman output powers of 2.6 and 2.4 W were obtained with the pulse widths of 5.8 and 6.3 ns, respectively, corresponding to the peak powers up to 89.7 and 76.5 kW.
RESUMEN
A single-longitudinal-mode crystalline Raman laser in the 1.7 µm wave band was reported for the first time, to the best of our knowledge. The YVO4 Raman laser, which was intracavity-pumped by an actively Q-switched 1314 nm Nd:YLF laser, demonstrated the cascaded Stokes oscillation at 1715 nm. By inserting an etalon in the fundamental resonator, linewidth narrowing and power scaling of the second-Stokes laser were realized based on the spatial-hole-burning-free Raman gain. With an optimal pulse repetition frequency of 4 kHz, the maximum single-longitudinal-mode average output power of 1.8 W was acquired with the spectrum linewidth of â¼340MHz. Further increasing the incident pump power, the second-Stokes laser transitioned to multimode regime, and the maximum average output power reached 2.7 W with the peak power as high as â¼380kW.
RESUMEN
In this Letter, the frequency expansion of an orthogonally polarized dual-wavelength laser, based on the cascaded stimulated Raman scattering, was demonstrated for the first time, to the best of our knowledge. The dual-wavelength fundamental laser generated from two separate Nd:YLF crystals was free of gain competition. Integrating the benefit of the two different orthogonally polarized Raman gain peaks in the KGd(WO4)2 (KGW) crystal, two sets of first-Stokes orthogonally polarized dual-wavelength Raman lasers were first achieved by rotating the Raman crystal for 90°. Furthermore, by simply replacing the Raman output coupler, we attained another two sets of second-Stokes orthogonally polarized dual-wavelength Raman lasers via the cascaded Raman shift. At a pulse repetition frequency of 5 kHz, the maximum first-Stokes and second-Stokes dual-wavelength Raman output powers were 3.12 and 2.09 W, with the combined peak powers of approximately 240 and 290 kW, respectively.
RESUMEN
We report a high average power actively Q-switched (AQS) orthogonal polarization dual-wavelength Nd:YLF laser at 1047 and 1053 nm. The gain-to-loss balance of dual wavelengths was realized via an uncoated quartz etalon. A maximum continuous wave (CW) output power of 14.2 W was obtained under the incident pump power of 41.7 W, corresponding to an optical-to-optical conversion efficiency of 34.1% and a slope efficiency of 38.3%. Active Q-switching was accomplished by inserting an acousto-optic modulator in the cavity. Under the incident pump power of 40 W, this setup delivered a maximum average output power of 10 W at the pulse repetition frequency (PRF) of 30 kHz and the largest pulse energy of 3.4 mJ at the PRF of 1 kHz, respectively. To the best of our knowledge, these are the highest average output powers for both CW and AQS orthogonally polarized dual-wavelength lasers based on laser crystals.
RESUMEN
The upcoming 5G era will powerfully promote the development of intelligent society in the future, but it will also bring serious electromagnetic pollution. Thus, the development of efficient, lightweight and multifunctional electromagnetic shielding materials and devices is an important research hotspot around the world. Herein, a novel needlelike Co3O4/C array architecture is constructed from MOF precursor via a simple pyrolysis process, and its microstructure is controllably tailored by changing the pyrolysis temperature. The unique 3D hierarchical structure and multiphase components enable the architecture to provide high-efficiency electromagnetic interference (EMI) shielding, along with good thermal insulation. More importantly, the architecture possesses fast ion transport channels, which can be used to construct supercapacitors with high specific capacitance and excellent cycle stability. Obviously, this work offers a new inspiration for the design and construction of multifunctional electromagnetic materials and devices.
RESUMEN
Objective: This study aimed to elucidate the pharmacological effects of sesamin (Ses) and its mechanism of action towards PM2.5-induced cardiovascular injuries. Method: Forty Sprague Dawley (SD) rats were randomly divided into five groups: a saline control group; a PM2.5 exposure group; and low-, middle-, and high-dose Ses pretreatment groups. The SD rats were pretreated with different concentrations of Ses for 21 days. Afterward, the rats were exposed to ambient PM2.5 by intratracheal instillation every other day for a total of three times. The levels of inflammatory markers, including tumor necrosis factor-alpha (TNF-α), interleukin-1beta (IL-1ß), and interleukin-6 (IL-6), and indicators related to oxidative responses, such as total superoxide dismutase (SOD), reduced glutathione (GSH), glutathione peroxidase (GSH-Px), and malondialdehyde (MDA), were measured in the blood and heart. The expression of ferroptosis-related proteins in heart tissues was determined via western blot and immunohistochemistry. Results: Ses pretreatment substantially ameliorated cardiovascular injuries in rats as evidenced by the decrease in the pathological score and collagen area. The decreased levels of SOD, GSH, and GSH-Px in the heart and serum were inhibited by Ses. In addition, Ses not only notably increased the activity of antioxidant enzymes but also reduced the levels of MDA, CK, LDH, CK-MB, IL-6, TNF-α, IL-1ß, and IL-6. Furthermore, Ses pretreatment upregulated the expression levels of GPX4, SLC7A11, TFRC, and FPN1 and inhibited the expression levels of FTH1 and FTL. Conclusion: Ses pretreatment could ameliorate PM2.5-induced cardiovascular injuries perhaps by inhibiting ferroptosis. Therefore, Ses pretreatment may be a novel strategy for the prevention and treatment of PM2.5-induced cardiovascular injury.