Limiting Interfacial Free Water and Proton Concentration by Hydrogel Electrolytes for Stable MoO3 Anode in a Proton Battery.

Aqueous rechargeable proton batteries are attractive due to the small ionic radius, light mass, and ultrafast diffusion kinetics of proton as charge carriers. However, the commonly used acidic electrolyte is usually very corrosive to the electrode material, which seriously affects the cycle life of the battery. Here, it is proposed that decreasing water activity and limiting proton concentration can effectively prevent side reactions of the MoO3 anode such as corrosion and hydrogen precipitation by using a lean-water hydrogel electrolyte. The as-prepared polyacrylamide (PAAM)-poly2-acrylamide-2-methylpropanesulfonic acid (PAMPS)/MnSO4 (PPM) hydrogel electrolyte not only has abundant hydrophilic groups that can form hydrogen bonds with free water and inhibit solvent-electrode interaction, but also has fixed anions that can maintain a certain interaction with protons. The assembled MoO3||MnO2 full battery can stably cycle over 500 times for ≈350 h with an unprecedented capacity retention of 100% even at a low current density of 0.5 A g-1. This work gives a hint that limiting free water as well as proton concentration is important for the design of electrolytes or interfaces in aqueous proton batteries.

Guanxin V alleviates ventricular remodeling after acute myocardial infarction with circadian disruption by regulating mitochondrial dynamics.

PURPOSE: Circadian disruption has been a common issue due to modern lifestyles. Ventricular remodeling (VR) is a pivotal progressive pathologic change after acute myocardial infarction (AMI) and circadian disruption may have a negative influence on VR according to the latest research. Whether or not Guanxin V (GXV) has a positive effect on VR after AMI with circadian disruption drew our interest. METHODS: Rats were randomly divided into a sham group, an AMI group, an AMI with circadian disruption group, and an AMI with circadian disruption treated with the GXV group according to a random number table. RNA sequencing (RNA-Seq) was utilized to confirm the different expressed genes regulated by circadian disruption. Cardiac function, inflammation factors, pathological evaluation, and mitochondrial dynamics after the intervention were conducted to reveal the mechanism by which GXV regulated VR after AMI with circadian disruption. RESULTS: RNA-Seq demonstrated that NF-κB was up-regulated by circadian disruption in rats with AMI. Functional and pathological evaluation indicated that compared with the AMI group, circadian disruption was associcataed with deteriorated cardiac function, expanded infarcted size, and exacerbated fibrosis and cardiomyocyte apoptosis. Further investigation demonstrated that mitochondrial dynamics imbalance was induced by circadian disruption. GXV intervention reversed the inflammatory status including down-regulation of NF-κB. Reserved cardiac function, limited infarct size, and ameliorated fibrosis and apoptosis were also observed in the GXV treated group. GXV maintained mitochondrial fission/fusion imbalance through suppressed expression of mitochondrial fission-associated proteins. CONCLUSION: The study findings suggest that identified mitochondrial dysfunctions may underlie the link between circadian disruption and VR. GXV may exert cardioprotection after AMI with circadian disruption through regulating mitochondrial dynamics.

Low-Electronegativity Cationic High-Entropy Doping to Trigger Stable Anion Redox Activity for High-Ni Co-Free Layered Cathodes in Li-Ion Batteries.

LiNi0.8 Co0.1 Mn0.1 O2 (NCM-811) exhibits the highest capacity in commercial lithium-ion batteries (LIBs), and the high Ni content (80 %) provides the only route for high energy density. However, the cationic structure instability arisen from the increase of Ni content (>80 %) limits the further increase of the capacity, and inevitable O2 release related to anionic structure instability hinders the utilization of anion redox activity. Here, by comparing various combinations of high-entropy dopants substituted Co element, we propose a low-electronegativity cationic high-entropy doping strategy to fabricate the high-Ni Co-free layered cathode (LiNi0.8 Mn0.12 Al0.02 Ti0.02 Cr0.02 Fe0.02 O2 ) that exhibits much higher capacity and cycling stability. Configurational disorder originated from cationic high-entropy doping in transition metal (TM) layer, anchors the oxidized lattice oxygen ((O2 )n- ) to preserve high (O2 )n- content, triggering the anion redox activity. Electron transfer induced by applying TM dopants with lower electronegativity than that of Co element, increases the electron density of O in TM-O octahedron (TM-O6 ) configuration to reach higher (O2 )n- content, resulting in the higher anion redox activity. With exploring the stabilization effect on both cations and anions of high-entropy doping and low-electronegativity cationic modified anion redox activity, we propose an innovative and variable pathway for rationally tuning the properties of commercial cathodes.

Chemical Buffer Layer Enabled Highly Reversible Zn Anode for Deeply Discharging and Long-Life Zn-Air Battery.

Rechargeable alkaline Zn-air batteries (ZABs) are attracting extensive attention owing to their high energy density and environmental friendliness. However, the dilemma of Zn anode, composed of ineluctable passivation and dissolution problems, severely hinders the discharge and cycling performance of the battery. Herein, the authors propose a chemical buffer layer coated on Zn metal (CBL@Zn) anode, in which ZnO nanorods are uniformly dispersed in graphene oxide (GO), to improve the reversibility of Zn↔ZnO electrochemical conversion process. Benefiting from the cooperative effect of ZnO nanorods' nuclei role and GO's adsorption affinity, the electrochemical precipitation-dissolution behavior of insulated ZnO is chemically regulated and the Zn(OH)4 2- ions are effectively confined in the chemical buffer layer. Therefore, the symmetrical CBL@Zn-CBL@Zn coin cell achieves a superior stability of 100 cycles with quite low overpotential (30 mv). When paired with commercial catalysts to assemble alkaline ZABs for practical use, an ultra high depth of discharge (DODZn ) >98% and excellent 450-h long-term cycling performance are realized. This chemical buffer strategy can potentially provide a new insight for developing other highly reversible alkaline Zn-metal batteries.

Crystal Plane Reconstruction and Thin Protective Coatings Formation for Superior Stable Zn Anodes Cycling 1300 h.

Some new insights into traditional metal pretreatment of anticorrosion for high stable Zn metal anodes are provided. A developed pretreatment methodology is employed to prefer the crystal plane of polycrystalline Zn and create 3.26 µm protective coatings mainly consisting of organic polymers and zinc salts on Zn foils (ROZ@Zn). In this process, Zn metal exhibits a surface-preferred (001) crystal plane proved by electron backscattered diffraction. Preferred (001) crystal planes and ROZ coatings can regulate Zn2+ diffusion, promote flat growth of Zn, and prevent side reactions. As a result, ROZ@Zn symmetrical cells exhibit superior plating/stripping performance over 1300 h. Impressively, it is significantly prolonged over 40 times in comparison to the bare Zn symmetric cell at 5 mA cm-2 . Moreover, Zn//MnO2  button cells have a high capacity retention of 96.3% after 1600 cycles and pouch cells have a high capacity 122 mAh g-1  after 200 cycle at 5 C. This work provides inspiration for high stable aqueous Zn metal batteries using the developed metal pretreatment of anticorrosion, which will be a viable, low-cost, and efficient technology. More interesting, it demonstrates the availability of reconstructing crystal planes by the largely heterogeneous reaction activation of the different crystal planes to H+ .

Synergistic Catalysis by Single-Atom Catalysts and Redox Mediator to Improve Lithium-Oxygen Batteries Performance.

Lithium-oxygen (Li-O2 ) batteries with ultrahigh theoretical energy density have attracted widespread attention while there are still problems with high overpotential and poor cycle stability. Rational design and application of efficient catalysts to improve the performance of Li-O2 batteries is of significant importance. In this work, Co single atoms catalysts are successfully combined with redox mediator (lithium bromide [LiBr]) to synergistically catalyze electrochemical reactions in Li-O2 batteries. Single-atom cobalt anchored in porous N-doped hollow carbon spheres (CoSAs-NHCS) with high specific surface area and high catalytic activity are utilized as cathode material. However, the potential performances of batteries are difficult to adequately achieve with only CoSAs-NHCS, owing to the blocked electrochemical active sites covered by insulating solid-state discharge product Li2 O2 . Combined with LiBr as redox mediator, the enhanced OER catalytic effect extends throughout all formed Li2 O2 during discharge. Meantime, the certain adsorption effect of CoSAs-NHCS on Br2 and Br3 - can reduce the shuttle of RMox . The synergistic effect of Co single atoms and LiBr can not only promote more Li2 O2 decomposition but also reduce the shuttle effect by absorbing the oxidized redox mediator. Li-O2 batteries with Co single atoms and LiBr achieve ultralow overpotential of 0.69 V and longtime stable cyclability.

Aqueous Rechargeable Li+ /Na+ Hybrid Ion Battery with High Energy Density and Long Cycle Life.

The practical application of aqueous rechargeable batteries is hampered by the low energy density and poor cycle stability, which mostly arises from the corrosion of cathode current collector, exfoliation of active material, and narrow electrochemical stability window of aqueous electrolyte. A light-weight and low-cost cathode current collector composed of graphite and carbon nanotube coated on nylon membrane exhibiting corrosion resistance and strong adhesion is developed. Also, a modified aqueous electrolyte with the addition of urea whose window is expanded to ≈3.2 V is developed that contributes to the formation of solid-electrolyte interphase on surfaces of electrodes. LiMn2 O4 /NaTi2 (PO4 )3 Li+ /Na+ hybrid ion battery using such aqueous electrolyte and current collector is demonstrated to cycle up to 10 000 times with low cost (60 dollars per kWh) and high energy density (100 Wh kg-1 ) for stationary energy storage and electronic vehicles applications.

A High-Energy and Long-Life Aqueous Zn/Birnessite Battery via Reversible Water and Zn2+ Coinsertion.

Aqueous rechargeable Zn/birnessite batteries have recently attracted extensive attention for energy storage system because of their low cost and high safety. However, the reaction mechanism of the birnessite cathode in aqueous electrolytes and the cathode structure degradation mechanics still remain elusive and controversial. In this work, it is found that solvation water molecules coordinated to Zn2+ are coinserted into birnessite lattice structure contributing to Zn2+ diffusion. However, the birnessite will suffer from hydroxylation and Mn dissolution with too much solvated water coinsertion. Through engineering Zn2+ primary solvation sheath with strong-field ligand in aqueous electrolyte, highly reversible [Zn(H2 O)2 ]2+ complex intercalation/extraction into/from birnessite cathode is obtained. Cathode-electrolyte interface suppressing the Mn dissolution also forms. The Zn metal anode also shows high reversibility without formation of "death-zinc" and detrimental dendrite. A full cell coupled with birnessite cathode and Zn metal anode delivers a discharge capacity of 270 mAh g-1 , a high energy density of 280 Wh kg-1 (based on total mass of cathode and anode active materials), and capacity retention of 90% over 5000 cycles.

Hierarchical Graphene-Scaffolded Silicon/Graphite Composites as High Performance Anodes for Lithium-Ion Batteries.

To better couple with commercial cathodes, such as LiCoO2 and LiFePO4 , graphite-based composites containing a small proportion of silicon are recognized as promising anodes for practical application in lithium-ion batteries (LIBs). However, the prepared Si/C composite still suffers from either rapid capacity fading or the high cost up to now. Here, the facile preparation of hierarchical graphene-scaffolded silicon/graphite composite is reported. In this designed 3D structure, Si nanoparticles are homogeneously dispersed on commercial graphites and then uniformly encapsulated in the hierarchical graphene scaffold. This hierarchical structure is also well characterized by the synchrotron X-ray computed nanotomography technique. When evaluated as anodes for LIBs, the hierarchical composite, with the Si weight ratio of 5 wt%, exhibits a reversible capacity of 559 mA h g-1 at 75 mA g-1 , suggesting an unprecedented utilization of Si up to 95%. Even at 372 mA g-1 , the composite can still maintain a high capacity retention of 90% after 100 cycles. Coupled with the LiFePO4 cathode, the full cell shows the high capacity of 114 mA h g-1 at 170 mA g-1 . The excellent Li-storage properties can be ascribed to the unique designed hierarchical structure.

Optimization of Microporous Carbon Structures for Lithium-Sulfur Battery Applications in Carbonate-Based Electrolyte.

Developing appropriate sulfur cathode materials in carbonate-based electrolyte is an important research subject for lithium-sulfur batteries. Although several microporous carbon materials as host for sulfur reveal the effect, methods for producing microporous carbon are neither easy nor well controllable. Moreover, due to the complexity and limitation of microporous carbon in their fabrication process, there has been rare investigation of influence on electrochemical behavior in the carbonate-based electrolyte for lithium-sulfur batteries by tuning different micropore size(0-2 nm) of carbon host. Here, we demonstrate an immediate carbonization process, self-activation strategy, which can produce microporous carbon for a sulfur host from alkali-complexes. Besides, by changing different alkali-ion in the previous complex, the obtained microporous carbon exhibits a major portion of ultramicropore (<0.7 nm, from 54.9% to 25.8%) and it is demonstrated that the micropore structure of the host material plays a vital role in confining sulfur molecule. When evaluated as cathode materials in a carbonate-based electrolyte for Li-S batteries, such microporous carbon/sulfur composite can provide high reversible capacity, cycling stability and good rate capability.

Sulfur-Rich Phosphorus Sulfide Molecules for Use in Rechargeable Lithium Batteries.

A new family of sulfur-rich phosphorus sulfide molecules (P4 S10+n ) and their electrochemical reaction mechanism with metallic Li has been explored. These P4 S10+n molecules are synthesized by the reaction between P4 S10 and S. For Li batteries, the P4 S40 molecule in the series of P4 S10+n molecules provides the highest capacity, which has a first discharge capacity of 1223 mAh g-1 at 100 mA g-1 and stabilizes at approximately 720 mAh g-1 at 500 mA g-1 after 100 cycles. This new class of sulfur-rich P4 S10+n molecules and its electrochemical behavior for room-temperature Li+ storage could provide novel insights for phosphorus sulfide molecules and high-energy batteries.

Synthesis of MoS2 @C Nanotubes Via the Kirkendall Effect with Enhanced Electrochemical Performance for Lithium Ion and Sodium Ion Batteries.

A MoS2 @C nanotube composite is prepared through a facile hydrothermal method, in which the MoS2 nanotube and amorphous carbon are generated synchronically. When evaluated as an anode material for lithium ion batteries (LIB), the MoS2 @C nanotube manifests an enhanced capacity of 1327 mA h g(-1) at 0.1 C with high initial Coulombic efficiency (ICE) of 92% and with capacity retention of 1058.4 mA h g(-1) (90% initial capacity retention) after 300 cycles at a rate of 0.5 C. A superior rate capacity of 850 mA h g(-1) at 5 C is also obtained. As for sodium ion batteries, a specific capacity of 480 mA h g(-1) at 0.5 C is achieved after 200 cycles. The synchronically formed carbon and stable hollow structure lead to the long cycle stability, high ICE, and superior rate capability. The good electrochemical behavior of MoS2 @C nanotube composite suggests its potential application in high-energy LIB.

A Composite Structure of Cu3 Ge/Ge/C Anode Promise Better Rate Property for Lithium Battery.

Much effort has been made to search for high energy and high power density electrode materials for lithium ion batteries. Here, a composite structure among Ge, C and Cu3Ge in Cu3Ge/Ge/C materials with a high rate performance of lithium batteries has been reported. Such Cu3Ge/Ge/C composite is synthesized through the in-situ formation of Ge, C and Cu3Ge by one-pot reaction. Density function theory (DFT) calculations and electrochemical impedance spectroscopy (EIS) suggest a higher electron mobility of the hibrid Cu3Ge/Ge/C composites through the in-situ preparation. As a result, remarkable charge rate over 300 C (fast delithiated capability) and outstanding cycling stability (≈0.02% capacity decay per cycle for 500 cycles at 0.5 C) are achieved for the Cu3Ge/Ge/C composites anode. These Cu3Ge/Ge/C composites demonstrate another perspective to explore the energy storage materials and should provide a new pathway for the design of advanced electrode materials.

Preparation of nanocrystalline silicon from SiCl4 at 200 °C in molten salt for high-performance anodes for lithium ion batteries.

Crystalline Si nanoparticles are prepared by reduction of SiCl4 with metallic magnesium in the molten salt of AlCl3 at 200 °C in an autoclave. AlCl3 not only acts as molten salt, but also participates in the reaction. The related experiments confirm that metallic Mg reduces AlCl3 to create nascent Al which could immediately reduce SiCl4 to Si, and the by-product MgCl2 would combine with AlCl3 forming complex of MgAl2Cl8. As anode for rechargeable lithium ion batteries, the as-prepared Si delivers the reversible capacity of 3083 mAh g(-1) at 1.2 A g(-1) after 50 cycles, and 1180 mAh g(-1) at 3 A g(-1) over 500 cycles.

Reversible Deposition/Dissolution of Double Hydroxides to Modulate Electrolyte pH Enabling High-Performance Aqueous Zinc-Ion Batteries.

Vanadium oxide has been extensively studied as a host of zinc ion intercalation but still suffers from low conductivity, dissolution, and byproduct accumulation during cycling. Here, we hydrothermally synthesize the VO2@MXene Ti3C2 (MV) composite and find that in the MV//3 M Zn(CF3SO3)2//Zn system, the double hydroxide Zn12(CF3SO3)9(OH)15·nH2O (ZCOH) uniformly covers VO2 during the charging process and dissolves reversibly during the discharge process. In situ X-ray diffraction of the MV combined with in situ pH measurements reveals that ZCOH acts as a pH buffer during cycling, which is beneficial to the cycling stability of batteries. And the theoretical calculation indicates that the decomposition energy required by ZCOH on the MV surface is lower than that on pure VO2, which is more conducive to ZCOH dissolution. The coin battery exhibits high-rate performance of 65.1% capacity retention at a current density of 15 A g-1 (compared to 0.6 A g-1) and a long cycling life of 20,000 cycles with a capacity retention of 80.7%. For a 22.4 mA h soft-packaged battery, its capacity remains at 72.1% after 2000 cycles. This work demonstrates the active role of ZCOH in the electrochemical process of VO2 and provides a new perspective for exploiting this mechanism to develop high-performance aqueous zinc-ion battery vanadium oxide cathode materials.

Facile synthesis and application of CuS nanospheres in aqueous and organic lithium ion batteries.

Monodispersed CuS nanospheres with a diameter of about 200 nm consisted of nanoplates have been hydrothermally synthesized via a facile process without any surfactant at 120 degrees C. The morphologies of the hierarchical CuS nanospheres were explored by X-ray diffraction, field emission scanning and transmission electron microscopy. In addition, CuS nanospheres cathode material for lithium-ion batteries were studied both in Organic and Aqueous phase. In organic electrolyte, the discharge capacity at first cycle with a cutoff voltage of 3-1.5 V is up to 628 mAh/g. When the voltage range is fixed from 1.8 to 2.6 V, the first discharge capacity reaches 225 mAh/g. After 30 cycles the discharge capacity has still kept at 90 mAh/g. On the other hand, it is well worth noting that here we first report the electrochemical behavior of CuS in aqueous lithium-ion batteries. In aqueous phase, different from other materials which have a drastic decay, it still keeps its initiative capacity 45 mAh/g after 100 cycles.

Shape controlled hydrothermal synthesis and characterization of LiFePO4 for lithium ion batteries.

Various LiFePO4 microstructures were synthesized via hydrothermal or solvothermal routes using different additives. In an aqueous solution, LiFePO4 spindles whose length was about 2 microm were obtained with the assistance of polyvinyl pyrrolidone (PVP). As PVP and P2O7(4-) added in water, ellipsoidal LiFePO4 particles which composed of nanoparticles around 100 nm in diameter were obtained. If the additive was cetyltrimethyl ammonium bromide (CTAB), sheet-like LiFePO4 crystals with the width of 100 nm were prepared. In the mixed solvents of water together with ethanol or acetylacetone, when adding CTAB or polyethylene glycol (20000), LiFePO4 plates or nanoparticles were obtained. The ellipsoidal LiFePO4 had the best electrochemical properties among all these products. It is found that the annealed samples were significantly better than the corresponding unannealed ones. Take the ellipsoidal LiFePO4 for example, the initial discharge capacity of annealed (161 mAh/g) was much higher than the unannealed ones (85 mAh/g) at 0.1 C and the former cell still could deliver a capacity of 143 mAh/g after 30 cycles.

Stable Plating and Stripping of Lithium Metal Anodes through Space Confinement and Stress Regulation.

Lithium metal anodes suffer from enormous mechanical stress derived from volume changes during electrochemical plating and stripping. The utilization of derived stress has the potential for the dendrite-free deposition and electrochemical reversibility of lithium metal. Here, we investigated the plating and stripping process of lithium metal held within a cellular three-dimensional graphene skeleton decorated with homogeneous Ag nanoparticles. Owing to appropriate reduction-splitting and electrostatic interaction of nitrogen dopants, the cellular skeletons show micron-level pores and superior elastic property. As lithium hosts, the cellular skeletons can physically confine the metal deposition and provide continuous volume-derived stress between Li and collectors, thus meliorating the stress-regulated Li morphology and improving the reversibility of Li metal anodes. Consequently, the symmetrical batteries exhibit a stable cycling performance with a span life of more than 1900 h. Full batteries (NCM811 as cathodes) achieve a reversible capacity of 181 mA h g-1 at 0.5 C and a stable cycling performance of 300 cycles with a capacity retention of 83.5%. The meliorative behavior of lithium metal within the cellular skeletons suggests the advantage of a stress-regulating strategy, which could also be meaningful for other conversion electrodes with volume fluctuation.

A mesoporous Al2O3 zincophilic sieve enables ultra-long lifespan of Zn-ion batteries.

The Zn dendrite growth and side reactions hinder the practical application of aqueous Zn-ion batteries. Here, a lactic acid-induced mesoporous Al2O3 (LA-MA) zincophilic sieve was constructed on a Zn anode to resolve these issues. The LA-MA layer with abundant mesoporous ion channels of 3.0 nm can regulate the solvation structure from [Zn2+(H2O)6]SO42- to more highly coordinated [Zn2+(H2O)5OSO32-] and restrain water-induced side reactions. Furthermore, the electrostatic attraction with zincophilic groups (CO, C-O) in the LA-MA layer has a positive effect on reducing the Zn2+ desolvation barrier and accelerating the Zn2+ diffusion. Under the synergism, the LA-MA@Zn symmetric cell exhibits over 5100 h at 0.25 mA cm-2. Impressively, an excellent capacity retention of 94.2% is achieved after 3500 cycles for the CNT/MnO2 cathode.

Room-temperature synthesis of BiOBr sub-microflowers and their photocatalytic properties.

Flower-like BiOBr sub-microstructures about 500 nm in diameter have been synthesized in the presence of tetraethylammonium bromide (TEAB) via a solution route at room temperature. SEM observation shows that these sub-microflowers are composed of nanoflakes with the thickness of 20 nm. The photocatalytic activities of flower-like BiOBr were evaluated by the degradation of methyl orange (MO) and phenol under visible-light and UV-light irradiation, which presented the efficiencies up to 97% within 1.5 h and 45% within 4 h, respectively.