Enhancement of Inhibition of the Pseudomonas sp. Biofilm Formation on Bacterial Cellulose-Based Wound Dressing by the Combined Action of Alginate Lyase and Gentamicin.

Bacterial biofilms generally contribute to chronic infections, including wound infections. Due to the antibiotic resistance mechanisms protecting bacteria living in the biofilm, they are a serious problem in the wound healing process. To accelerate the wound healing process and avoid bacterial infection, it is necessary to select the appropriate dressing material. In this study, the promising therapeutic properties of alginate lyase (AlgL) immobilised on BC membranes for protecting wounds from Pseudomonas aeruginosa infection were investigated. The AlgL was immobilised on never dried BC pellicles via physical adsorption. The maximum adsorption capacity of AlgL was 6.0 mg/g of dry BC, and the equilibrium was reached after 2 h. The adsorption kinetics was studied, and it has been proven that the adsorption was consistent with Langmuir isotherm. In addition, the impact of enzyme immobilisation on bacterial biofilm stability and the effect of simultaneous immobilisation of AlgL and gentamicin on the viability of bacterial cells was investigated. The obtained results showed that the AlgL immobilisation significantly reduced the amount of polysaccharides component of the P. aeruginosa biofilm. Moreover, the biofilm disruption by AlgL immobilised on BC membranes exhibited synergism with the gentamicin, resulting in 86.5% more dead P. aeruginosa PAO-1 cells.

Boosting of Antibacterial Performance of Cellulose Based Paper Sheet via TiO2 Nanoparticles.

Here, we aimed to boost antibacterial performance of cellulose fibers for paper sheet application. Therefore, TiO2 nanoparticles have been used with controlled loading onto the surface of the fibers. A simple and facile composite preparation route based on ultrasound and mechanical assisted stirring has been developed. We tested cellulose paper enriched by TiO2 from 1.0 wt% to 8.0 wt%, respectively. Antibacterial performance has been studied against Staphylococcus aureus and Escherichia coli bacteria. Studies showed that all composites exhibit significant capability to reduce living cells of S. aureus and E. coli bacteria at least 60%. The simplicity, low cost, and reproducibility of the prepared method indicates the potential to be scaled up for industrial applications.

Potato Juice, a Starch Industry Waste, as a Cost-Effective Medium for the Biosynthesis of Bacterial Cellulose.

In this work, we verified the possibility of valorizing a major waste product of the potato starch industry, potato tuber juice (PJ). We obtained a cost-effective, ecological-friendly microbiological medium that yielded bacterial cellulose (BC) with properties equivalent to those from conventional commercial Hestrin-Schramm medium. The BC yield from the PJ medium (>4 g/L) was comparable, despite the lack of any pre-treatment. Likewise, the macro- and microstructure, physicochemical parameters, and chemical composition showed no significant differences between PJ and control BC. Importantly, the BC obtained from PJ was not cytotoxic against fibroblast cell line L929 in vitro and did not contain any hard-to-remove impurities. The PJ-BC soaked with antiseptic exerted a similar antimicrobial effect against Staphylococcus aureus and Pseudomonas aeruginosa as to BC obtained in the conventional medium and supplemented with antiseptic. These are very important aspects from an application standpoint, particularly in biomedicine. Therefore, we conclude that using PJ for BC biosynthesis is a path toward significant valorization of an environmentally problematic waste product of the starch industry, but also toward a significant drop in BC production costs, enabling wider application of this biopolymer in biomedicine.

Immobilization pattern of morphologically different microorganisms on bacterial cellulose membranes.

The aim of this study was to assess the immobilization pattern of microorganisms characterized by varying cell shapes and sizes (rod-shaped bacteria Lactobacillus delbruecki, spherical-shaped yeast Saccharomyces cerevisiae and hyphae forms of Yarrowia lipolytica) on bacterial cellulose of various material properties. The 'adsorption-incubation' method was used for the purposes of immobilization. The immobilization pattern included adsorption efficiency, ability of the immobilized cells to multiply within the carrier expressed as incubation efficiency and the degree of release of the immobilized cells from the carrier. The efficiency of adsorption and incubation was affected by the morphology of the immobilized cells and increased together with cellulose surface area. For smaller bacterial cells a higher level of loading was obtained on the same surface as compared to larger yeast cells. During incubation, the number of immobilized bacterial and yeast cells increased significantly in comparison to the number of cells adsorbed on the carrier during the adsorption step. Despite the morphological differences between the S. cerevisiae and Y. lipolytica cells, there were no statistically significant differences in the efficiency of adsorption and incubation. It was also revealed that the release ratio values obtained for L. delbruecki and S. cerevisiae increased along with cellulose surface area. Interestingly, Y. lipolytica cells in the pseudohyphae and hyphae forms penetrated deeply into the three-dimensional network of BC nanofibrils which prevented subsequent cell release. It was confirmed that carrier selection must be individually matched to the type of immobilized cells based especially on its porosity-related parameters.

Modification of Bacterial Cellulose with Quaternary Ammonium Compounds Based on Fatty Acids and Amino Acids and the Effect on Antimicrobial Activity.

In the present work, bacterial cellulose (BC) membranes have been modified with bioactive compounds based on long chain dimer of C18 linoleic acid, referred to as the dilinoleic acid (DLA) and tyrosine (Tyr), a natural amino acid capable of forming noncovalent cation-π interactions with positively charged ethylene diamine (EDA). This new compound, [EDA][DLA-Tyr], has been synthesized by simple coupling reaction, and its chemical structure was characterized by 1H NMR and Fourier transform infrared spectroscopy. The antimicrobial activity of a new compound against S. aureus and S. epidermidis, two cocci associated with skin and wound infections, was assessed. The [EDA][DLA-Tyr] impregnated BC exhibited strong and long-term antimicrobial activity against both staphylococcal species. The results showed a 57-66% and 56-60% reduction in S. aureus and S. epidermidis viability, respectively, depending on [EDA][DLA-Tyr] concentration used. Importantly, [EDA][DLA-Tyr] molecules were released gradually from the BC pellicle, while a reference antibiotic, erythromycine (ER), did not show any antibacterial activity against S. aureus and S. epidermidis after 48 h of soaking in deionized water. Thus, a combination of [EDA][DLA-Tyr] and BC could be a promising new class of wound dressing displaying both biocompatibility and antimicrobial activity.

Increased water content in bacterial cellulose synthesized under rotating magnetic fields.

The current study describes properties of bacterial cellulose (BC) obtained from Komagataeibacter xylinus cultures exposed to the rotating magnetic field (RMF) of 50 Hz frequency and magnetic induction of 34 mT for controlled time during 6 days of cultivation. The experiments were carried out in the customized RMF exposure system adapted for biological studies. The obtained BC displayed an altered micro-structure, degree of porosity, and water-related parameters in comparison to the non-treated, control BC samples. The observed effects were correlated to the duration and the time of magnetic exposure during K. xylinus cultivation. The most preferred properties in terms of water-related properties were found for BC obtained in the setting, where RMF generator was switched off for the first 72 h of cultivation and switched on for the next 72 h. The described method of BC synthesis may be of special interest for the production of absorbent, antimicrobial-soaked dressings and carrier supports for the immobilization of microorganisms and proteins.

YourTuber matters: Screening for potato variety for the synthesis of bacterial cellulose in its tuber juice.

This study aimed to characterize potato varieties for producing potato juice media (PJM) that allow bacterial cellulose (BC) effective and cost-efficient production. The study used 12 edible and 10 starch potato varieties from an accredited company for breeding and seed production. In general, edible varieties produced a 73 % higher PJ yield. Favorable BC yields were obtained using five edible and two starch varieties. Notably, the average BC yields in PJM from three edible varieties (Altesse, Mazur, and Owacja) were above the average BC yield from Hestrin-Schramm (HS) medium (4.3, 4.1, and 3.9 g/L v. 3.69 g/L, respectively); these varieties had relatively high concentrations of glucose (3.3-4.2 g/L), fructose (3.0-4.2 g/L), and sucrose (2.9-4.2 g/L). It was also shown that the macro- and microstructure, crystallinity, and polymerization degree showed no significant differences between PJM-derived BC and HS-BC. As estimated, the cost of PJM required to produce 1 kg of BC is approximately EUR 60. In contrast, the cost of HS medium exceeds 1200 EUR. In conclusion, our research has proven that PJM can significantly reduce the costs (by over tenfold) of the medium for BC biosynthesis, ultimately lowering overall costs of producing this valuable biomaterial.

Argon plasma-modified bacterial cellulose filters for protection against respiratory pathogens.

In this work, we present novel, sustainable filters based on bacterial cellulose (BC) functionalized with low-pressure argon plasma (LPP-Ar). The "green" production process involved BC biosynthesis by Komagataeibacter xylinus, followed by simple purification, homogenization, lyophilization, and finally LPP-Ar treatment. The obtained LPP-Ar-functionalized BC-based material (LPP-Ar-BC-bM) showed excellent antimicrobial and antiviral properties against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria, and an enveloped bacteriophage phage Φ6, with no cytotoxicity versus murine fibroblasts in vitro. Further, filters consisting of three layers of LPP-Ar-BC-bM had >99 % bacterial and viral filtration efficiency, while maintaining sufficiently low airflow resistance (6 mbar at an airflow of 95 L/min). Finally, as a proof-of-concept, we were able to prepare 80 masks with LPP-Ar-BC-bM filter and ~85 % of volunteer medical staff assessed them as "good" or "very good" in terms of comfort. We conclude that our novel sustainable, biobased, biodegradable filters are suitable for respiratory personal protective equipment (PPE), such as surgical masks and respirators.

The effects of rotating magnetic field and antiseptic on in vitro pathogenic biofilm and its milieu.

The application of various magnetic fields for boosting the efficacy of different antimicrobial molecules or in the character of a self-reliant antimicrobial agent is considered a promising approach to eradicating bacterial biofilm-related infections. The purpose of this study was to analyze the phenomenon of increased activity of octenidine dihydrochloride-based antiseptic (OCT) against Staphylococcus aureus and Pseudomonas aeruginosa biofilms in the presence of the rotating magnetic field (RMF) of two frequencies, 5 and 50 Hz, in the in vitro model consisting of stacked agar discs, placed in increasing distance from the source of the antiseptic solution. The biofilm-forming cells' viability and morphology as well as biofilm matrix structure and composition were analyzed. Also, octenidine dihydrochloride permeability through biofilm and porous agar obstacles was determined for the RMF-exposed versus unexposed settings. The exposure to RMF or OCT apart did not lead to biofilm destruction, contrary to the setting in which these two agents were used together. The performed analyses revealed the effect of RMF not only on biofilms (weakening of cell wall/membranes, disturbed morphology of cells, altered biofilm matrix porosity, and composition) but also on its milieu (altered penetrability of octenidine dihydrochloride through biofilm/agar obstacles). Our results suggest that the combination of RMF and OCT can be particularly promising in eradicating biofilms located in such areas as wound pockets, where physical obstacles limit antiseptic activity.

Preparation of Komagataeibacter xylinus Inoculum for Bacterial Cellulose Biosynthesis Using Magnetically Assisted External-Loop Airlift Bioreactor.

The aim of this study was to demonstrate the applicability of a novel magnetically assisted external-loop airlift bioreactor (EL-ALB), equipped with rotating magnetic field (RMF) generators for the preparation of Komagataeibacterxylinus inoculum during three-cycle repeated fed-batch cultures, further used for bacterial cellulose (BC) production. The fermentation carried out in the RMF-assisted EL-ALB allowed to obtain an inoculum of more than 200× higher cellular density compared to classical methods of inoculum preparation. The inoculum obtained in the RMF-assisted EL-ALB was characterized by a high and stable metabolic activity during repeated batch fermentation process. The application of the RMF-assisted EL-ALB for K. xylinus inoculum production did not induce the formation of cellulose-deficient mutants. It was also confirmed that the ability of K. xylinus to produce BC was at the same level (7.26 g/L of dry mass), regardless of inoculum age. Additionally, the BC obtained from the inoculum produced in the RMF-assisted EL-ALB was characterized by reproducible water-related properties, mechanical strength, nano-fibrillar structure and total crystallinity index. The lack of any negative impact of inoculum preparation method using RMF-assisted EL-ALB on BC properties is of paramount value for its future applications, including use as a biomaterial in tissue engineering, wound healing, and drug delivery, where especially BC liquid capacity, nanostructure, crystallinity, and mechanical properties play essential roles.

Investigation on Green Synthesis, Biocompatibility, and Antibacterial Activity of Silver Nanoparticles Prepared Using Cistus incanus.

This paper describes the plant-mediated preparation of silver nanoparticles with aqueous extract and infusion of Cistus incanus leaves. To evaluate aqueous extract and infusion antioxidant capacity and total phenolic content the DPPH and Folin-Ciocalteau methods were utilized. The antioxidant capacity and total phenolic content of extract and infusion were equal to 85.97 ± 6.54 mg gallic acid equivalents per gram of dry weight.; 10.76 ± 0.59 mg/mL and 12.65 ± 1.04 mg gallic acid equivalents per gram of dry weight.; 3.10 ± 0.14 mg/mL, respectively. The formed nanoparticles displayed the characteristic absorption band in the 380-450 nm wavelength range. The average size of particles was in the 68.8-71.2 nm range. Morphology and phase composition analysis revealed the formation of spherical nanoparticles with a face-centred cubic structure. Immune compatibility tests of nanoparticles and plant extracts showed no activation of the THP1-XBlue™ monocyte. Cytotoxicity tests performed with L929 mice fibroblasts showed that nanoparticles should be utilized at a concentration of 16 ppm. The minimum inhibitory concentrations determined with the microdilution method for nanoparticles prepared with plant infusion for S. aureus and S. epidermidis were 2 ppm and 16 ppm, respectively.

Superabsorbent crosslinked bacterial cellulose biomaterials for chronic wound dressings.

In this work, we present a novel ex situ modification of bacterial cellulose (BC) polymer, that significantly improves its ability to absorb water after drying. The method involves a single inexpensive and easy-to-perform process of BC crosslinking, using citric acid along with catalysts, such as disodium phosphate, sodium bicarbonate, ammonium bicarbonate or their mixtures. In particular, the mixture of disodium phosphate and sodium bicarbonate was the most promising, yielding significantly greater water capacity (over 5 times higher as compared to the unmodified BC) and slower water release (over 6 times as compared to the unmodified BC). Further, our optimized crosslinked BC had over 1.5x higher water capacity than modern commercial dressings dedicated to highly exuding wounds, while exhibiting no cytotoxic effects against fibroblast cell line L929 in vitro. Therefore, our novel BC biomaterial may find application in super-absorbent dressings, designed for chronic wounds with imbalanced moisture level.

Antibacterial Activity of N,O-Acylated Chitosan Derivative.

The antibacterial activity of N,O-acylated chitosan derivative with linoleic acid (CH_LA) was tested by disc and well diffusion, agar impregnation and microdilution methods against Staphylococcus aureus, Escherichia coli and Helicobacter pylori strains. Hydrophobically modified chitosan (HMC) was expected to exhibit enhanced antibacterial activity and specific mucin interactions. Although diffusion tests have not indicated the antibacterial potential of chitosan (CH) or CH_LA, the results of the microdilution method demonstrated that tested polymers significantly reduced the amount of living bacteria cells in different concentrations depending on the microorganism. Additionally, CH_LA was characterized by enhanced antibacterial activity compared to CH, which may suggest a different mechanism of interaction with S. aureus and H. pylori. Furthermore, the UV-VIS analysis revealed that the amphiphilic character of derivative led to strong CH_LA-mucin interactions. The study proved the high potential of CH_LA in antibacterial applications, especially for the gastrointestinal tract.

Significant enhancement of citric acid production by Yarrowia lipolytica immobilized in bacterial cellulose-based carrier.

The aim of this study was to improve the yield of citric acid (CA), an industrially valuable metabolite, obtained during Yarrowia lipolytica yeast culturing. To this end, Y. lipolytica cells were immobilized on a novel bacterial cellulose (BC) based carrier and subjected to four subsequent cycles of fed-batch culturing. During the fermentation process, yeasts metabolic stability, glucose consumption and CA production were analyzed. The results of our study have shown that BC-immobilized yeasts utilized more glucose than free cells and that the metabolic activity of BC-immobilized cells and the resultant CA production remained on a stable level throughout 4 fermentation batches, while the drop in free cells' metabolic stability and the consequent drop in CA production was observed with each subsequent batch. Also, the overall concentration of CA product was higher in immobilized vs. free yeasts (121-129 g/L vs. 99-110 g/L, respectively). The presented results indicate that the application of a BC carrier for Y. lipolytica culturing correlates not only with a higher yield of CA product but also with more stable and repeatable conditions of the biotechnological fermentation process. The results obtained in this study may find multiple biotechnological applications in which immobilization of various types of cells is required.

Application of bacterial cellulose experimental dressings saturated with gentamycin for management of bone biofilm in vitro and ex vivo.

Bacterial cellulose is one of the most promising polymers of recent years. Herein, we present a possibility of BC application as a carrier of gentamycin antibiotic for the treatment and prevention of bone infections. We have shown that BC saturated with gentamycin significantly reduces the level of biofilm-forming bone pathogens, namely Staphylococcus aureus and Pseudomonas aeruginosa, and displays very low cytotoxicity in vitro against osteoblast cell cultures. Another beneficial feature of our prototype dressing is prolonged release of gentamycin, which provides efficient protection from microbial contamination and subsequent infection. Moreover, it seems that bacterial cellulose (BC) alone without any antimicrobial added, may serve as a barrier by significantly hampering the ability of the pathogen to penetrate to the bone structure. Therefore, a gentamycin-saturated BC dressing may be considered as a possible alternative for gentamycin collagen sponge broadly used in clinical setting. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 108B:30-37, 2020.

Bacterial cellulose as a support for yeast immobilization - Correlation between carrier properties and process efficiency.

The aim of the current study was to analyze physicochemical properties of bacterial cellulose (BC) produced by Komagataeibacter xylinus for various periods of time in stationary conditions with regard to its potential as a carrier for yeast (Saccharomyces cerevisiae and Yarrowia lipolytica) immobilization, and subsequently to correlate the relationship between these properties and the efficiency of the immobilization process. Physicochemical properties of BC, depending on the time of its biosynthesis, were as follows: surface area 7.21-11.04 m2/g, pore volume 3.11-3.96 cm3/g, pore diameter 0.011-0.109 nm, water holding capacity 32-64%, water relies capacity 10600-33400%, swelling ratio 132-389%, polymerization degree 2260-4780 and total crystallinity index 1.22-1.96 (3-30 days, respectively). The linear regression analysis showed that number of immobilized yeasts increased with values of surface area, pore size, pore diameter, swelling ratio, water release capacity and polymerization degree. The opposite trend was observed in case of water holding capacity and total crystallinity index. The analysis of physicochemical properties of BC performed in the current study have significant translational implications for understanding the relationships between BC-based carriers and the efficiency of yeast immobilization.

Potential of Biocellulose Carrier Impregnated with Essential Oils to Fight Against Biofilms Formed on Hydroxyapatite.

In this research, bacterial cellulose (BC), one of the most promising biopolymers of the recent years, was saturated with thyme, eucalyptus and clove essential oils (EOs) and applied against staphylococcal and pseudomonal biofilms formed on hydroxyapatite (HA). BC dressings were thoroughly analyzed with regard to their physical properties. Moreover, the exact composition and ability of particular EO molecules to adhere to HA was assessed. Additionally, cytotoxicity of oil-containing, cellulose-based dressings towards osteoblasts and fibroblasts as well as their impact on reactive oxygen species (ROS) production by macrophages was assessed. The results revealed the high ability of BC dressings to absorb and subsequently release EOs from within their microstructure; the highest number of compounds able to adhere to HA was found in the thyme EO. The eucalyptus EO displayed low, while thyme and clove EOs displayed high cytotoxicity towards fibroblast and osteoblast cell lines. The clove EO displayed the highest eradication ability toward staphylococcal, while the thyme EO against pseudomonal biofilm. Taken together, the results obtained indicate the suitability of EO-saturated BC dressings to eradicate pseudomonal and staphylococcal biofilm on HA surface and moreover, to not trigger reactive oxygen species production by immune system effector cells. However, due to cytotoxic effects of thyme and clove EOs towards cell lines in vitro, the eucalyptus EO-saturated BC dressing is of highest potential to be further applied.

Bacterial cellulose yield increased over 500% by supplementation of medium with vegetable oil.

Bacterial cellulose (BC), produced by Komagataeibacter xylinus, has numerous applications to medicine and industry. A major limitation of BC use is relatively low production rates and high culturing media costs. By supplementing culture media with 1% vegetable oil, we achieved BC yield exceeding 500% over the yield obtained in standard media. BC properties were similar to cellulose cultured in standard methods with regard to cytotoxicity but displayed significantly higher water swelling capacity and mechanical strength. As we demonstrated herein, this significantly increased BC yield is the result of microscopic and macroscopic physiochemical processes reflecting a complex interaction between K. xylinus biophysiology, chemical processes of BC synthesis, and physiochemical forces between BC membranes, oil and culturing vessel walls. Our findings have significant translational implications to biomedical and clinical settings and can be transformative for the cellulose biopolymer industry.

A.D.A.M. test (Antibiofilm Dressing's Activity Measurement) - Simple method for evaluating anti-biofilm activity of drug-saturated dressings against wound pathogens.

In the present article, we propose a simple Antibiofilm Dressing's Activity Measurement (A.D.A.M.) test that allows to check in vitro a dressing's suitability against biofilm-related wound infections. To perform the test, three agar discs are covered with biofilm formed by the tested pathogen after which they are assembled one over another in the form of an agar plug and placed in the well of a 24-well plate. The top disc is covered with the analyzed dressing and the entire set is incubated for 24h. During this time, the investigated antimicrobial substance is released from the dressing and penetrates to subsequent biofilm-covered agar discs. Biofilm reduction is measured using 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) spectrometric assay and the results are compared to untreated control samples (agar plug covered with biofilm and without the dressing/or with a passive dressing placed on the top disc). Furthermore, in order to standardize the differences in penetrability of the drugs released from active dressings the results can be expressed as a dimensionless value referred to as the Penetrability Index. In summary, A.D.A.M. test is simple, cheap, can be performed practically in every clinical laboratory and takes no more time than routine microbiological diagnostics. Apart from measuring the released drug's activity, the A.D.A.M. test allows to assess drug penetrability (across three agar discs), reflecting real wound conditions, where microbes are frequently hidden under the necrotic tissue or cloth. In conclusion, the A.D.A.M. test produces a high volume of data that, when analyzed, can provide a researcher with a valuable hint concerning the applicability of active dressings against specific biofilm pathogens in a particular setting.

Correlation between type of alkali rinsing, cytotoxicity of bio-nanocellulose and presence of metabolites within cellulose membranes.

The study aimed at evaluation of various types of alkali rinsing with regard to their efficacy in terms of removal, not only of bacteria but also bacterial metabolites, from cellulose matrices formed by three Komagataeibacter xylinus strains. Moreover, we tested the type of alkali rinsing on membrane cytotoxicity in vitro in fibroblast and osteoblast cells and we compared matrices' ability to induce oxidative stress in macrophages. We identified 11 metabolites of bacterial origin that remained in cellulose after rinsing. Moreover, our results indicated that the type of alkali rinsing should be adjusted to specific K. xylinus strains that are used as cellulose producers to obtain safe biomaterials in the context of low cytotoxicity and macrophage induction. The findings have translational importance and may be of direct significance to cellulose dressing manufacturers.