RESUMEN
OBJECTIVES: In order to enable less experienced physicians to reliably detect early signs of stroke, A novel approach was proposed to enhance the visual perception of ischemic stroke in non-enhanced CT. METHODS: A set of 39 retrospective CT scans were used, divided into 23 cases of acute ischemic stroke and 16 normal patients. Stroke cases were obtained within 4.5 h of symptom onset and with a mean NIHSS of 12.9±7.4. After selection of adjunct slices from the CT exam, image averaging was performed to reduce the noise and redundant information. This was followed by a variational decomposition model to keep the relevant component of the image. The expectation maximization method was applied to generate enhanced images. RESULTS: We determined a test to evaluate the performance of observers in a clinical environment with and without the aid of enhanced images. The overall sensitivity of the observer's analysis was 64.5 % and increased to 89.6 % and specificity was 83.3 % and increased to 91.7 %. CONCLUSION: These results show the importance of a computational tool to assist neuroradiology decisions, especially in critical situations such as the diagnosis of ischemic stroke. KEY POINTS: ⢠Diagnosing patients with stroke requires high efficiency to avoid irreversible cerebral damage. ⢠A computational algorithm was proposed to enhance the visual perception of stroke. ⢠Observers' performance was increased with the aid of enhanced images.
Asunto(s)
Isquemia Encefálica/diagnóstico por imagen , Interpretación de Imagen Radiográfica Asistida por Computador/métodos , Accidente Cerebrovascular/diagnóstico por imagen , Tomografía Computarizada por Rayos X/métodos , Anciano , Algoritmos , Humanos , Persona de Mediana Edad , Estudios Retrospectivos , Sensibilidad y EspecificidadRESUMEN
BACKGROUND AND OBJECTIVES: Imaging exams play a key role in cochlear implants with regard to both planning implantation before surgery and quality control after surgery. The ability to visualize the three-dimensional location of implanted electrodes is useful in clinical routines for assessing patient outcome. The aim of this study was to evaluate linear and angular insertion depth measurements of cochlear implants based on conventional computed tomography. METHODS: Tools for linear and angular measurements of cochlear implants were used in computed tomography exams. The tools realized the insertion measurements in an image reconstruction of the CIs, based on image processing techniques. We comprehensively characterized two cochlear implant models while obviating possible changes that can be caused by different cochlea sizes by using the same human temporal bones to evaluate the implant models. RESULTS: The tools used herein were able to differentiate the insertion measurements between two cochlear implant models widely used in clinical practice. We observed significant differences between both insertion measurements because of their different design and construction characteristics (pâ¯=â¯0.004 and 0.003 for linear and angular measurements, respectively; t-test). The presented methodology showed to be a good tool to calculate insertion depth measurements, since it is easy to perform, produces high-resolution images, and is able to depict all the landmarks, thus enabling measurement of the angular and linear insertion depth of the most apical electrode contacts. CONCLUSION: The present study demonstrates practical and useful tools for evaluating cochlear implant electrodes in clinical practice. Further studies should measure preoperative and postoperative benefits in terms of speech recognition and evaluate the preservation of residual hearing in the implanted ear. Such studies can also determine correlations between surgical factors, electrode positions, and performance. In addition to refined surgical techniques, the precise evaluation of cochlear length and correct choice of cochlear implant characteristics can play an important role in postoperative outcomes.
Asunto(s)
Implantación Coclear/métodos , Implantes Cocleares , Hueso Temporal/diagnóstico por imagen , Hueso Temporal/cirugía , Humanos , Procesamiento de Imagen Asistido por Computador , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: Platelet-rich plasma (PRP) has been used to favor anterior cruciate ligament (ACL) healing after reconstruction surgeries. However, clinical data are still inconclusive and subjective about PRP. Thus, we propose a quantitative method to demonstrate that PRP produced morphological structure changes. METHODS: Thirty-four patients undergoing ACL reconstruction surgery were evaluated and divided into control group (sixteen patients) without PRP application and experiment group (eighteen patients) with intraoperative application of PRP. Magnetic resonance imaging (MRI) scans were performed 3 months after surgery. We used Matlab® and machine learning (ML) in Orange Canvas® to texture analysis (TA) features extraction. Experienced radiologists delimited the regions of interest (RoIs) in the T2-weighted images. Sixty-two texture parameters were extracted, including gray-level co-occurrence matrix and gray level run length. We used the algorithms logistic regression (LR), naive Bayes (NB), and stochastic gradient descent (SGD). RESULTS: The accuracy of the classification with NB, LR, and SGD was 83.3%, 75%, 75%, respectively. For the area under the curve, NB, LR, and SGD presented values of 91.7%, 94.4%, 75%, respectively. In clinical evaluations, the groups show similar responses in terms of improvement in pain and increase in the IKDC index (International Knee Documentation Committee) and Lysholm score indices differing only in the assessment of flexion, which presents a significant difference for the group treated with PRP. CONCLUSIONS: Here, we demonstrated quantitatively that patients who received PRP presented texture changes when compared to the control group. Thus, our findings suggest that PRP interferes with morphological parameters of the ACL. TRIAL REGISTRATION: Protocol no. CAAE 56164316.6.0000.5411.
Asunto(s)
Ligamento Cruzado Anterior/patología , Ligamento Cruzado Anterior/cirugía , Procedimientos Ortopédicos/métodos , Procedimientos de Cirugía Plástica/métodos , Plasma Rico en Plaquetas , Adulto , Ligamento Cruzado Anterior/diagnóstico por imagen , Ligamento Cruzado Anterior/fisiopatología , Femenino , Humanos , Cuidados Intraoperatorios , Modelos Logísticos , Aprendizaje Automático , Imagen por Resonancia Magnética , Masculino , Cicatrización de HeridasRESUMEN
BACKGROUND: Neuroimaging strategies are essential to locate, to elucidate the etiology, and to the follow up of brain disease patients. Magnetic resonance imaging (MRI) provides good cerebral soft-tissue contrast detection and diagnostic sensitivity. Inflammatory lesions and tumors are common brain diseases that may present a similar pattern of a cerebral ring enhancing lesion on MRI, and non-enhancing core (which may reflect cystic components or necrosis) leading to misdiagnosis. Texture analysis (TA) and machine learning approaches are computer-aided diagnostic tools that can be used to assist radiologists in such decisions. METHODS: In this study, we combined texture features with machine learning (ML) methods aiming to differentiate brain tumors from inflammatory lesions in magnetic resonance imaging. Retrospective examination of 67 patients, with a pattern of a cerebral ring enhancing lesion, 30 with inflammatory, and 37 with tumoral lesions were selected. Three different MRI sequences and textural features were extracted using gray level co-occurrence matrix and gray level run length. All diagnoses were confirmed by histopathology, laboratorial analysis or MRI. RESULTS: The features extracted were processed for the application of ML methods that performed the classification. T1-weighted images proved to be the best sequence for classification, in which the differentiation between inflammatory and tumoral lesions presented high accuracy (0.827), area under ROC curve (0.906), precision (0.837), and recall (0.912). CONCLUSION: The algorithm obtained textures capable of differentiating brain tumors from inflammatory lesions, on T1-weghted images without contrast medium using the Random Forest machine learning classifier.
RESUMEN
BACKGROUND: Background: Tuberculosis (TB) is an infectious lung disease with high worldwide incidence that severely compromises the quality of life in affected individuals. Clinical tests are currently employed to monitor pulmonary status and treatment progression. The present study aimed to apply a three-dimensional (3D) reconstruction method based on chest radiography to quantify lung-involvement volume of TB acute-phase patients before and after treatment. In addition, these results were compared with indices from conventional clinical exams to show the coincidence level. METHODS: A 3D lung reconstruction method using patient chest radiography was applied to quantify lung-involvement volume using retrospective examinations of 50 patients who were diagnosed with pulmonary TB and treated with two different drugs schemes. Twenty-five patients were treated with Scheme I (rifampicin, isoniazid, and pyrazinamide), whereas twenty-five patients were treated with Scheme II (rifampicin, isoniazid, pyrazinamide, and ethambutol). Acute-phase reaction: Serum exams included C-reactive protein levels, erythrocyte sedimentation rate, and albumin levels. Pulmonary function was tested posttreatment. RESULTS: We found strong agreement between lung involvement and serum indices pre- and posttreatment. Comparison of the functional severity degree with lung involvement based on 3D image quantification for both treatment schemes found a high correlation. CONCLUSIONS: The present 3D reconstruction method produced a satisfactory agreement with the acute-phase reaction, most notably a higher significance level with the C-reactive protein. We also found a quite reasonable coincidence between the 3D reconstruction method and the degree of functional lung impairment posttreatment. The performance of the quantification method was satisfactory when comparing the two treatment schemes. Thus, the 3D reconstruction quantification method may be useful tools for monitoring TB treatment. The association with serum indices are not only inexpensive and sensitive but also may be incorporated into the assessment of patients during TB treatment.
RESUMEN
Volume measurements of maxillary sinus may be useful to identify diseases affecting paranasal sinuses. However, literature shows a lack of consensus in studies measuring the volume. This may be attributable to different computed tomography data acquisition techniques, segmentation methods, focuses of investigation, among other reasons. Furthermore, methods for volumetrically quantifying the maxillary sinus are commonly manual or semiautomated, which require substantial user expertise and are time-consuming. The purpose of the present study was to develop an automated tool for quantifying the total and air-free volume of the maxillary sinus based on computed tomography images. The quantification tool seeks to standardize maxillary sinus volume measurements, thus allowing better comparisons and determinations of factors that influence maxillary sinus size. The automated tool utilized image processing techniques (watershed, threshold, and morphological operators). The maxillary sinus volume was quantified in 30 patients. To evaluate the accuracy of the automated tool, the results were compared with manual segmentation that was performed by an experienced radiologist using a standard procedure. The mean percent differences between the automated and manual methods were 7.19% ± 5.83% and 6.93% ± 4.29% for total and air-free maxillary sinus volume, respectively. Linear regression and Bland-Altman statistics showed good agreement and low dispersion between both methods. The present automated tool for maxillary sinus volume assessment was rapid, reliable, robust, accurate, and reproducible and may be applied in clinical practice. The tool may be used to standardize measurements of maxillary volume. Such standardization is extremely important for allowing comparisons between studies, providing a better understanding of the role of the maxillary sinus, and determining the factors that influence maxillary sinus size under normal and pathological conditions.
Asunto(s)
Tomografía Computarizada de Haz Cónico/métodos , Seno Maxilar/diagnóstico por imagen , Reconocimiento de Normas Patrones Automatizadas/métodos , Adulto , Algoritmos , Femenino , Humanos , Imagenología Tridimensional/métodos , Modelos Lineales , Masculino , Tamaño de los Órganos , Reproducibilidad de los Resultados , Estudios RetrospectivosRESUMEN
BACKGROUND: The purpose of the present study was to evaluate differences in lung damage in patients with paracoccidioidomycosis (PCM) in two endemic regions of Brazil (Botucatu, SP, in the southeastern region and Campo Grande, MS, in the west central region). METHODS: The study sought to objectively quantify fibrosis and emphysema treated patients using high-resolution computed tomography (HRCT) that was performed according to an established and validated computational method. The analysis was based on clinical data that were associated with objective quantifications of pulmonary sequelae. We performed a retrospective analysis of HRCT exams from 32 successfully treated patients with the chronic form of PCM. The two groups had similar characteristics with regard to age, symptom duration, smoking history, and titers on a diagnostic serologic test. RESULTS: The statistical analysis revealed more severe cases and a higher percentage of emphysema in the Campo Grande group. The mean percentages of emphysema were 40.2% and 13.6% in the Campo Grande and Botucatu groups, respectively. The percentage of fibrosis was significantly higher in the Botucatu group (11.3%) than in the Campo Grande group (2.3%). CONCLUSIONS: The present results may reflect differences in cryptic species of P. brasiliensis in these two geographic regions of Brazil. Further studies should be done to clarify the differences observed herein. Such findings may help unveil differences among cryptic species in terms of the pulmonary consequences that are caused by this disease, which would be highly beneficial to PCM patients.
RESUMEN
Digital radiographic imaging is increasing in veterinary practice. The use of radiation demands responsibility to maintain high image quality. Low doses are necessary because workers are requested to restrain the animal. Optimizing digital systems is necessary to avoid unnecessary exposure, causing the phenomenon known as dose creep. Homogeneous phantoms are widely used to optimize image quality and dose. We developed an automatic computational methodology to classify and quantify tissues (i.e., lung tissue, adipose tissue, muscle tissue, and bone) in canine chest computed tomography exams. The thickness of each tissue was converted to simulator materials (i.e., Lucite, aluminum, and air). Dogs were separated into groups of 20 animals each according to weight. Mean weights were 6.5 ± 2.0 kg, 15.0 ± 5.0 kg, 32.0 ± 5.5 kg, and 50.0 ± 12.0 kg, for the small, medium, large, and giant groups, respectively. The one-way analysis of variance revealed significant differences in all simulator material thicknesses (p < 0.05) quantified between groups. As a result, four phantoms were constructed for dorsoventral and lateral views. In conclusion, the present methodology allows the development of phantoms of the canine chest and possibly other body regions and/or animals. The proposed phantom is a practical tool that may be employed in future work to optimize veterinary X-ray procedures.
Asunto(s)
Fantasmas de Imagen/veterinaria , Dosis de Radiación , Radiografía Torácica/veterinaria , Tomografía Computarizada por Rayos X/veterinaria , Animales , Perros , Radiografía Torácica/métodos , Reproducibilidad de los Resultados , Tórax , Tomografía Computarizada por Rayos X/métodos , Medicina Veterinaria/métodos , Rayos XRESUMEN
BACKGROUND: Hepatocellular carcinoma is a primary tumor of the liver and involves different treatment modalities according to the tumor stage. After local therapies, the tumor evaluation is based on the mRECIST criteria, which involves the measurement of the maximum diameter of the viable lesion. This paper describes a computed methodology to measure through the contrasted area of the lesions the maximum diameter of the tumor by a computational algorithm. METHODS: 63 computed tomography (CT) slices from 23 patients were assessed. Non-contrasted liver and HCC typical nodules were evaluated, and a virtual phantom was developed for this purpose. Optimization of the algorithm detection and quantification was made using the virtual phantom. After that, we compared the algorithm findings of maximum diameter of the target lesions against radiologist measures. RESULTS: Computed results of the maximum diameter are in good agreement with the results obtained by radiologist evaluation, indicating that the algorithm was able to detect properly the tumor limits. A comparison of the estimated maximum diameter by radiologist versus the algorithm revealed differences on the order of 0.25 cm for large-sized tumors (diameter > 5 cm), whereas agreement lesser than 1.0 cm was found for small-sized tumors. CONCLUSIONS: Differences between algorithm and radiologist measures were accurate for small-sized tumors with a trend to a small decrease for tumors greater than 5 cm. Therefore, traditional methods for measuring lesion diameter should be complemented non-subjective measurement methods, which would allow a more correct evaluation of the contrast-enhanced areas of HCC according to the mRECIST criteria.