Study of the Counter Cation Effects on the Supramolecular Structure and Electronic Properties of a Dianionic Oxamate-Based {NiII2} Helicate.

Herein, we describe the synthesis, crystal structure, and electronic properties of {[K2(dmso)(H2O)5][Ni2(H2mpba)3]·dmso·2H2O}n (1) and [Ni(H2O)6][Ni2(H2mpba)3]·3CH3OH·4H2O (2) [dmso = dimethyl sulfoxide; CH3OH = methanol; and H4mpba = 1,3-phenylenebis(oxamic acid)] bearing the [Ni2(H2mpba)3]2- helicate, hereafter referred to as {NiII2}. SHAPE software calculations indicate that the coordination geometry of all the NiII atoms in 1 and 2 is a distorted octahedron (Oh) whereas the coordination environments for K1 and K2 atoms in 1 are Snub disphenoid J84 (D2d) and distorted octahedron (Oh), respectively. The {NiII2} helicate in 1 is connected by K+ counter cations yielding a 2D coordination network with sql topology. In contrast to 1, the electroneutrality of the triple-stranded [Ni2(H2mpba)3] 2- dinuclear motif in 2 is achieved by a [Ni(H2O)6]2+ complex cation, where the three neighboring {NiII2} units interact in a supramolecular fashion through four R22(10) homosynthons yielding a 2D array. Voltammetric measurements reveal that both compounds are redox active (with the NiII/NiI pair being mediated by OH- ions) but with differences in formal potentials that reflect changes in the energy levels of molecular orbitals. The NiII ions from the helicate and the counter-ion (complex cation) in 2 can be reversibly reduced, resulting in the highest faradaic current intensities. The redox reactions in 1 also occur in an alkaline medium but at higher formal potentials. The connection of the helicate with the K+ counter cation has an impact on the energy levels of the molecular orbitals; this experimental behavior was further supported by X-ray absorption near-edge spectroscopy (XANES) experiments and computational calculations.

Straightforward Mechanosynthesis of a Phase-Pure Interpenetrated MOF-5 Bearing a Size-Matching Tetrazine-Based Linker.

The archetypal metal-organic framework-5 (MOF-5 or IRMOF-1) has been explored as a benchmark sorbent material with untapped potential to be studied in the capture and storage of gases and chemical confinement. Several derivatives of this framework have been prepared using the multivariate (MTV) strategy through mixing size-matching linkers to isolate, for example, MIXMOFs that outperform same-linker congeners when employed as gas reservoirs. Herein, we describe a straightforward protocol that uses mechanosynthesis (solvent-free grinding) followed by mild activation in dimethylformamide (DMF)/CHCl3 (40 °C and ambient pressure) to synthesize a functional phase-pure interpenetrated MOF-5 (int-MOF-5) bearing the size-matching 1,4-benzene dicarboxylate (BDC) and 1,2,4,5-tetrazine-3,6-dicarboxylate (TZDC) linkers in the backbone of the interpenetrated MIXMOF. We found that the grinding involving a mixture of H2TZDC and H2BDC in a 1:4 ratio (20% of H2TZDC) in the presence of zinc(II) acetate yields a crystalline solid that upon activation forms a phase-pure int-MOF-5 herein referred to as 20%TZDC-MOF-5. The crystalline phase, thermal stability, and porous structure of 20%TZDC-MOF-5 were thoroughly characterized, and the gas adsorption performance of the MIXMOF was investigated through the isotherms of N2 and H2 at 77 K and CO2 at 273 and 296 K. The pore size distribution for 20%TZDC-MOF-5 was found to be very similar to that determined using single crystals of the same-linker int-MOF-5. The presence of TZDC in the MIXMOF led to a slight increase in the uptake values for both H2 and CO2, suggesting that beneficial interactions take place. To the best of our knowledge, this is the first report presenting a suitable protocol to yield a functionalized int-MOF-5 as a promising means of synergistically fine-tuning the confinement of small target molecules such as CO2 and H2.

A cationic fcu-lanthanide MOF enhances the uptake of iodine vapour at room temperature.

The first example of a cationic cluster-based fcu-lanthanide metal-organic framework (MOF) bearing an asymmetric linker, herein named UOTT-4, has been designed and fully characterized. Compared to its rare-earth (RE) anionic counterpart (RE-UiO-66), UOTT-4 was found to significantly improve the performance towards adsorption of iodine vapour at room temperature, opening avenues for the design of the next-generation cationic porous materials for the beneficial uptake and confinement of target molecules.

Anion-Dependent Catalytic C-C Bond Cleavage of a Lignin Model within a Cationic Metal-Organic Framework.

The development of heterogeneous catalysts capable of selectively converting lignin model compounds into products of added value offers an exciting avenue to explore in the production of renewable chemical feedstocks. The use of metal-organic frameworks (MOFs) in such chemical transformations relies largely on the presence of accessible open metal sites found within highly porous networks that simultaneously allow for fast transport and strong interactions with desired substrates. Here, we present the first systematic study on the modulation of catalytic performance of a cationic framework, [Cu2(L)(H2O)2](NO3)2·5.5H2O (L = 1,1'-bis(3,5-dicarboxylatophenyl)-4,4'-bipyridinium), achieved through the exchange of anionic guests. Remarkably, the catalytic activity proves to be highly anion-dependent, with a nearly 10-fold increase toward the aerobic C-C bond cleavage of a lignin model compound when different anionic species are incorporated within the MOF. Moreover, we demonstrate that the cationic nature of the MOF, imparted by the incorporation of viologen moieties within the linker, tunes the electrophilicity of the active copper(II) sites, resulting in stronger interactions with the substrate. As such, the copper-based framework exhibits enhanced catalytic performance when compared to its neutral counterpart, emphasizing the appeal of charged frameworks for use as green heterogeneous catalysts.

Unexpected formation of a dodecanuclear {CoII6CuII6} nanowheel under ambient conditions: magneto-structural correlations.

We report the unique heterobimetallic dodecanuclear oxamate-based {CoII6CuII6} nanowheel obtained using an environmentally friendly synthetic protocol. The effective Hamiltonian methodology employed herein allows the rationalisation of magnetic isotropic or anisotropic metal clusters, being a significant advance for future studies of exciting properties only observed at low and ultralow temperatures.

Building-up host-guest helicate motifs and chains: a magneto-structural study of new field-induced cobalt-based single-ion magnets.

In this work, we present the synthetic pathway, a refined structural description, complete solid-state characterization and the magnetic properties of four new cobalt(ii) compounds of formulas [Co(H2O)6][Co2(H2mpba)3]·2H2O·0.5dmso (1), [Co(H2O)6][Co2(H2mpba)3]·3H2O·0.5dpss (2), [Co2(H2mpba)2(H2O)4]n·4nH2O (3), and [Co2(H2mpba)2(CH3OH)2(H2O)2]n·0.5nH2O·2ndpss (4) [dpss = 2,2'-dipyridyldisulfide and H4mpba = 1,3-phenylenebis(oxamic) acid], where 2 and 4 were obtained from [Co(dpss)Cl2] (Pre-I) as the source of cobalt(ii). All four compounds are air-stable and were prepared under ambient conditions. 1 and 2 were obtained from a slow diffusion method [cobalt(ii) : H2mpba2- molar ratio used 1 : 1] and their structures are made up of [Co2(H2mpba)3]2- anionic helicate units and [Co(H2O)6]2+ cations, exhibiting supramolecular three-dimensional structures. Interestingly, a supramolecular honeycomb network between the helicate units interacting with each other through R22(10) type hydrogen bonds occurs in 2 hosting one co-crystallized dpss molecule. On the other hand, for the first time, linear (3) and zigzag (4) cobalt(ii) chains were isolated by slow evaporation of stirred solutions of mixed solvents with cobalt(ii) : H2mpba2- in 1 : 2 molar ratio at room temperature. Magnetic measurements of Pre-I revealed a quasi magnetically isolated S = 3/2 spin state with a significant second-order spin-orbit contribution as expected for tetrahedrally coordinated cobalt(ii) ions. The analysis of the variable temperature static (dc) magnetic susceptibility data through first- (1 and 3) and second-order spin-orbit coupling models (2 and 4) reveals the presence of magnetically non-interacting high-spin cobalt(ii) ions with easy-axis (1 and 4)/easy-plane magnetic anisotropies (2 and 4) with low rhombic distortions. Dynamic (ac) magnetic measurements for Pre-I and 1-4 below 8.0 K show that they are examples of field-induced Single-Ion Magnets (SIMs).

Characterization of compounds derived from copper-oxamate and imidazolium by X-ray absorption and vibrational spectroscopies.

In this work, compounds derived from copper-oxamate anions (ortho, meta, and para)-phenylenebis (oxamate) and imidazolium cations (1-butyl-3-methylimidazolium) were synthesized. The compounds were characterized by Raman and FTIR spectroscopies and the band assignments were supported by DFT calculations. Strong IR bands from 1610 to 1700cm(-1) dominated the spectra of the complex and can be assigned to νCO vibrations of the [Cu(opba)](2-) anions by the comparison with the DFT data. In opposition to the FTIR spectra, the main vibrational bands in the Raman spectra are observed in the 1350-1600cm(-1) range. All bands in this region are associated to the modified benzene vibrations of the copper-phenylenebis(oxamate) anions. X-ray absorption near edge (XANES) at different energies (NK and Cu L2,3 edges) was also used to probe the interionic interactions. XANES data show that anion-cation interaction in the Cu-oxamate-imidazolium changes the electronic structure around the CuN sites in the oxamate anion.

A heterobimetallic [Mn5(II)Cu5(II)] nanowheel modulated by a flexible bis-oxamate type ligand.

The synthesis, crystal structure and preliminary magnetic characterization of a new heterobimetallic [Mn5(II)Cu5(II)] wheel containing a flexible bis-oxamate type ligand are described. This decanuclear compound exhibits a relatively strong intra-wheel antiferromagnetic interaction leading to a ground spin state S = 10.

A pH-triggered bistable copper(II) metallacycle as a reversible emulsion switch for biphasic processes.

A unique bistable copper-metallacyclic complex is used as an elegant molecular switch for the reversible formation of emulsions by simple pH variation. This switch may have several exciting applications in biphasic processes such as catalysis and separation science technologies.