DNA-Directed Assembly of Hierarchical MOF-Cellulose Nanofiber Microbioreactors with "Branch-Fruit" Structures.

Assembling metal-organic frameworks (MOFs) into ordered multidimensional porous superstructures promises the encapsulation of enzymes for heterogeneous biocatalysts. However, the full potential of this approach has been limited by the poor stability of enzymes and the uncontrolled assembly of MOF nanoparticles onto suitable supports. In this study, a novel and exceptionally robust Ni-imidazole-based MOF was synthesized in water at room temperature, enabling in situ enzyme encapsulation. Based on this MOF platform, we developed a DNA-directed assembly strategy to achieve the uniform placement of MOF nanoparticles onto bacterial cellulose nanofibers, resulting in a distinctive "branch-fruit" structure. The resulting hybrid materials demonstrated remarkable versatility across various catalytic systems, accommodating natural enzymes, nanoenzymes, and multienzyme cascades, thus showcasing enormous potential as universal microbioreactors. Furthermore, the hierarchical composites facilitated rapid diffusion of the bulky substrate while maintaining the enzyme stability, with ∼3.5-fold higher relative activity compared to the traditional enzyme@MOF immobilized in bacterial cellulose nanofibers.

WssI from the Gram-negative bacterial cellulose synthase is an O-acetyltransferase that acts on cello-oligomers with several acetyl donor substrates.

In microbial biofilms, bacterial cells are encased in a self-produced matrix of polymers (e.g., exopolysaccharides) that enable surface adherence and protect against environmental stressors. For example, the wrinkly spreader phenotype of Pseudomonas fluorescens colonizes food/water sources and human tissue to form robust biofilms that can spread across surfaces. This biofilm largely consists of bacterial cellulose produced by the cellulose synthase proteins encoded by the wss (WS structural) operon, which also occurs in other species, including pathogenic Achromobacter species. Although phenotypic mutant analysis of the wssFGHI genes has previously shown that they are responsible for acetylation of bacterial cellulose, their specific roles remain unknown and distinct from the recently identified cellulose phosphoethanolamine modification found in other species. Here, we have purified the C-terminal soluble form of WssI from P. fluorescens and Achromobacter insuavis and demonstrated acetylesterase activity with chromogenic substrates. The kinetic parameters (kcat/KM values of 13 and 8.0 M-1 s-1, respectively) indicate that these enzymes are up to four times more catalytically efficient than the closest characterized homolog, AlgJ from the alginate synthase. Unlike AlgJ and its cognate alginate polymer, WssI also demonstrated acetyltransferase activity onto cellulose oligomers (e.g., cellotetraose to cellohexaose) with multiple acetyl donor substrates (p-nitrophenyl acetate, 4-methylumbelliferyl acetate, and acetyl-CoA). Finally, a high-throughput screen identified three low micromolar WssI inhibitors that may be useful for chemically interrogating cellulose acetylation and biofilm formation.

Wearable Device with High Thermoelectric Performance and Long-Lasting Usability Based on Gel-Thermocells for Body Heat Harvesting.

Utilizing the thermogalvanic effect, flexible thermoelectric materials present a compelling avenue for converting heat into electricity, especially in the context of wearable electronics. However, prolonged usage is hampered by the limitation imposed on the thermoelectric device's operational time due to the evaporation of moisture. Deep eutectic solvents (DESs) offer a promising solution for low-moisture gel fabrication. In this study, a bacterial cellulose (BC)/polyacrylic acid (PAA)/guanidinium chloride (GdmCl) gel is synthesized by incorporating BC into the DES. High-performance n-type and p-type thermocells (TECs) are developed by introducing Fe(ClO4)2/3 and K3/4Fe(CN)6, respectively. BC enhances the mechanical properties through the construction of an interpenetrating network structure. The coordination of carboxyl groups on PAA with Fe3+ and the crystallization induced by Gdm+ with [Fe(CN)6]4- remarkably improve the thermoelectric performance, achieving a Seebeck coefficient (S) of 2.4 mV K-1 and ion conductivity (σ) of 1.4 S m-1 for the n-type TEC, and ‒2.8 mV K-1 and 1.9 S m-1 for the p-type TEC. A flexible wearable thermoelectric device is fabricated with a S of 82 mV K-1 and it maintains a stable output over one month. This research broadens the application scope of DESs in the thermoelectric field and offers promising strategies for long-lasting wearable energy solutions.

A Flexible Multifunctional Cyanoethyl-Modified Bacterial Cellulose Nanofiber Framework for High-Energy and High-Power Density Aqueous Li-Ion Batteries.

Aqueous rechargeable lithium-ion batteries (ARLIBs) are extensively researched due to their inherent safety, typical affordability, and potential high energy density. However, fabricating ARLIBs with both high energy density and power performance remains challenging. Herein, based on cyanoethyl-modified bacterial cellulose nanofibers (CBCNs), a multifunctional fast ion transport framework is developed to construct the flexible free-standing ARLIBs with high areal loading and excellent rate performance. Benefiting from the unique merits of CBCNs, such as ultra-high aspect ratio, excellent toughness, superior adhesion, good lithiophilicity and ideal stability, the flexible free-standing and highly robust electrodes are fabricated and exhibit a long-term stable cycling of 1200 cycles with a high specific capacity of 117 mAh∙g-1 at 15 C. Remarkably, the corresponding full cell with the free-standing high mass loading (45.5 mg∙cm-2) electrodes under the condition of ultra-low addition of battery binder demonstrates a cycle lifespan of over 1000 cycles with a specific capacity of 120 mAh∙g-1 and a capacity decay as low as 0.03% per cycle, which is far superior to those of almost all previous reports. This work provides a strategy for constructing ARLIBs with high energy density and power performance by introducing a unique fast ion transport nanofiber framework.

Scalable, Green, Flexible Photochromic Bacterial Cellulose for Multicolor Switching, Photo-patterning, and Daily Sunlight UV Monitoring.

Sustainable, durable, and diverse photochromic smart textiles based on bacterial cellulose (BC) have emerged as attractive candidates in UV-sensing applications due to the green and easy functionalization of BC. However, existing BC-based photochromic textiles lack photochromic efficiency and combining fastness. In this study, a green strategy for in situ fermentation is developed to achieve the directional distribution of functional particles and remarkable photochromism in photochromic bacterial cellulose (PBC). The unique functional design obtained by regulating the photochromic dye distribution in 3D nanonetworks of PBCs during in situ growth affords a more uniform distribution and high fastness. Benefiting from the uniform distribution of photochromic dyes and adequate utilization of the 3D network structure, more surface area is provided to receive and utilize the photon energy from the UV rays, making the photochromic process more effective. The as-prepared PBCs exhibited rapid (within 1 min) and stable (30 cycles) discoloration and multicolor selectivity. Their simple preparation process and exceptional wearability, e.g., their flexibility, lightweight, and air permeability, make them suitable for various applications, including tunable color switching systems, photopatterning, and daily sunlight UV monitoring. This study provides empirical value for the biofabrication of photochromic textiles and wearable flexible UV sensors.

One-Step Synthesis of Multifunctional Bacterial Cellulose Film-Based Phase Change Materials with Cross-Linked Network Structure for Solar-Thermal Energy Conversion, Storage, and Utilization.

As one of the important directions of solar energy utilization, the construction of composite photothermal phase change materials (PCM) with reasonable network support and low leakage in the simple method is important to solve the transient availability of solar energy and achieve long-lasting energy output. Here, a multifunctional silylated bacterial cellulose (BC)/hydroxylated carbon nanotube (HCNT)/polyethylene glycol (PEG) (SBTP) photothermal film-based PCM with cross-linked network structure is prepared by simple one-step synthesis. The formation of the cross-linked network structure achieves the enhancement of BC support network, prominent dispersion of HCNT and the direct introduction and perfect interlocking of PEG. Therefore, the optimal SBTP film exhibits high thermal enthalpy of 145.1 J g-1, enthalpy efficiency of over 94%, robust shape stability and low leakage of <1.2%. It also displays high photothermal conversion of over 80 °C, photothermal storage of 394 s g-1 and excellent stability. Thus, it can demonstrate a maximum output voltage of 423 mV and high power density of 30.26 W m-2 under three solar irradiations when applied in the solar-thermal-electric energy conversion field. Meanwhile, it also can apply in the thermal management of solar cell and light-emitting diode (LED) chip, and convert the waste heat into electricity, demonstrating multi-scene application capability.

Optimizing the Production of Bacterial Cellulose Nanofibers and Nanocrystals Through Strategic Fiber Pretreatment.

Bacterial cellulose (BC) has unique properties such as high tensile strength, high crystallinity, and high purity. The fiber length of BC causes different attributes. Therefore, the degradation of BC has been studied extensively. In this study, the fibers of BC were rearranged via a DMAc-LiCl solvent and BC was degraded in the wet state. Two different degradation methods were applied: milling with liquid nitrogen and autoclave treatment. The degraded BCs were characterized by FTIR, TEM, AFM, TGA, and XRD. The solvent helps to align the fibers, making them more crystalline. The degraded BCs had a lower crystalline ratio than untreated BC, due to increased hydrogen bonding during degradation in the wet state. Degradation with an autoclave produced two different degraded BCs: nanofibrils and spherical nanocrystals, with and without solvent pretreatment, respectively. The nanofibril lengths were between 312 and 700 nm depending on the applied method, and the spherical nanocrystal size was 56 nm. The rearrangement via solvent causes an important difference in the degradation of BC. Nanofibrils and nanocrystals can be obtained, depending on the rearrangement of fibers before the degradation process.

Fabrication of bacterial cellulose/PVP nanofiber composites by electrospinning.

This study aimed to address a significant challenge in the application of bacterial cellulose (BC) within tissue engineering and regenerative medicine by tackling its inherent insolubility in water and organic solvents. Our team introduced a groundbreaking approach by utilizing zinc sulfate (ZnSO4) as a solvent to render BC soluble, a novel contribution to the literature. Subsequently, the obtained soluble BC was combined with varying concentrations of polyvinylpyrrolidone (PVP). Notably, we pioneered the fabrication of BC/PVP composite scaffolds with customizable fiber surface morphology and regulated degradation rates through the electrospun technique. Several key parameters, such as PVP concentration (8%, 15%, 12%, and 20% w/v), applied voltage (22, 15, and 12 kV), and a fixed nozzle-collector distance of 10 cm with a flow rate of 0.9 mL/h, were systematically evaluated so as to find the optimum parameter created BC/PVP product with electrospun. For electrospun BC/PVP products, a voltage of 12 kV was found to be optimal. Intriguingly, our findings revealed enhanced cell adhesion and proliferation in BC/PVP electrospun products compared with using PVP membranes alone. Specifically, cell viability for PVP and PVP/BC electrospun products was determined as 50.73% and 79.95%, respectively. In terms of thermal properties, the BC/PVP electrospun product exhibited a mass loss of 82.6% at 380°C, while PVP alone experienced 90.2% mass loss at around 280°C. Furthermore, the protein adhesion capacities were measured at 62.3 ± 1.2 µg for PVP and 99.4 ± 2 µg for BC/PVP electrospun products, whereas product showed no biodegradation over 28 days and had notable water retention capacity. In conclusion, our research not only successfully attained nanofiber morphology but also showcased enhanced cell attachment and proliferation on the BC/PVP electrospun product.

Bacterial cellulose as an ideal potential treatment for burn wounds: A comprehensive review.

Burn wound regeneration is a complex process, which has many serious challenges such as slow wound healing, secondary infection, and inflammation. Therefore, it is essential to utilise appropriate biomaterials to accelerate and guide the wound healing process. Bacterial cellulose (BC), a natural polymer synthesised by some bacteria, has attracted much attention for wound healing applications due to its unique properties including excellent physicochemical and mechanical properties, simple purification process, three-dimensional (3D) network structure similar to extracellular matrix, high purity, high water holding capacity and significant permeability to gas and liquid. BC's lack of antibacterial activity significantly limits its biomedical and tissue engineering application, but adding antimicrobial agents to it remarkably improves its performance in tissue regeneration applications. Burn wound healing is a complex long-lasting process. Using biomaterials in wound treatment has shown that they can satisfactorily accelerate wound healing. The purpose of this review is to elaborate on the importance of BC-based structures as one of the most widely used modern wound dressings in the treatment of burn wounds. In addition, the combination of various drugs, agents, cells and biomolecules with BC to expand its application in burn injury regeneration is discussed. Finally, the main challenges and future development direction of BC-based structures for burn wound repair are considered. The four most popular search engines PubMed/MEDLINE, Science Direct, Scopus and Google Scholar were used to help us find relevant papers. The most frequently used keywords were bacterial cellulose, BC-based biocomposite, wound healing, burn wound and vascular graft.

Whole genome sequencing analysis of Komagataeibacter nataicola reveals its potential in food waste valorisation for cellulose production.

BACKGROUND: Komagataeibacter nataicola (K. nataicola) is a gram-negative acetic acid bacterium that produces natural bacterial cellulose (BC) as a fermentation product under acidic conditions. The goal of this work was to study the complete genome of K. nataicola and gain insight into the functional genes in K. nataicola that are responsible for BC synthesis in acidic environments. METHODS AND RESULT: The pure culture of K. nataicola was obtained from yeast-glucose-calcium carbonate (YGC) agar, followed by genomic DNA extraction, and subjected to whole genome sequencing on a Nanopore flongle flow cell. The genome of K. nataicola consists of a 3,767,936 bp chromosome with six contigs and 4,557 protein coding sequences. The maximum likelihood phylogenetic tree and average nucleotide identity analysis confirmed that the bacterial isolate was K. nataicola. The gene annotation via RAST server discovered the presence of cellulose synthase, along with three genes associated with lactate utilization and eight genes involved in lactate fermentation that could potentially contribute to the increase in acid concentration during BC synthesis. CONCLUSION: A more comprehensive genome study of K. nataicola may shed light into biological pathway in BC productivity as well as benefit the analysis of metabolites generated and understanding of biological and chemical interactions in BC production later.

Overproduction of bacterial cellulose from Acetobacter xylinum BPR2001 using food industries wastes.

In this study, a cost-effective complex culture media containing molasses and corn steep liquor (CSL) was developed for the high production of bacterial cellulose (BC) by investigating the effect of four effective factors on BC production at three levels using Taguchi and combined methods. The predicted and actual values of BC production in optimal conditions by Taguchi and combined methods were 8.41 and 14.52 g/L, respectively. These results showed that the combined method was more suitable for predicting the optimal conditions in the optimization of BC production, the cost of developed culture medium was around 94% cost of HS medium preparation, molasses was the most effective factor in both experimental design methods, and initial pH adjustment had little impact on BC production. Then, the effect of inoculation conditions containing three factors of inoculation age, ethanol addition time, and agitation rate on the increase of BC production at three levels was investigated using the response surface methodology with the Box-Behnken design algorithm. Under the optimal conditions including inoculum age of 3 days, ethanol addition time of 10 days, and stirring speed of 100 rpm, the predicted and experimental results of BC production were 21.61 and 20.21 g/L, respectively. This is among the highest ever reported for BC production, which was achieved with a more cost-effective culture medium containing molasses and CSL.

Development of a bacterial cellulose-gelatin composite as a suitable scaffold for cardiac tissue engineering.

PURPOSE: Cardiac tissue engineering is suggested as a promising approach to overcome problems associated with impaired myocardium. This is the first study to investigate the use of BC and gelatin for cardiomyocyte adhesion and growth. METHODS: Bacterial cellulose (BC) membranes were produced by Komagataeibacter xylinus and coated or mixed with gelatin to make gelatin-coated BC (BCG) or gelatin-mixed BC (mBCG) scaffolds, respectively. BC based-scaffolds were characterized via SEM, FTIR, XRD, and AFM. Neonatal rat-ventricular cardiomyocytes (nr-vCMCs) were cultured on the scaffolds to check the capability of the composites for cardiomyocyte attachment, growth and expansion. RESULTS: The average nanofibrils diameter in all scaffolds was suitable (~ 30-65 nm) for nr-vCMCs culture. Pore diameter (≥ 10 µm), surface roughness (~ 182 nm), elastic modulus (0.075 ± 0.015 MPa) in mBCG were in accordance with cardiomyocyte requirements, so that mBCG could better support attachment of nr-vCMCs with high concentration of gelatin, and appropriate surface roughness. Also, it could better support growth and expansion of nr-vCMCs due to submicron scale of nanofibrils and proper elasticity (~ 0.075 MPa). The viability of nr-vCMCs on BC and BCG scaffolds was very low even at day 2 of culture (~ ≤ 40%), but, mBCG could promote a metabolic active state of nr-vCMCs until day 7 (~ ≥ 50%). CONCLUSION: According to our results, mBCG scaffold was the most suitable composite for cardiomyocyte culture, regarding its physicochemical and cell characteristics. It is suggested that improvement in mBCG stability and cell attachment features may provide a convenient scaffold for cardiac tissue engineering.

A novel cost-effective methodology for the screening of nanocellulose producing micro-organisms.

In this paper, the work has been done to develop a cost-effective methodology, for the isolation of the potential producer of bacterial nanocellulose. No report is available in the literature, on the use of gram flour and table sugar for the screening of nanocellulose-producing isolates. Since commercially used, Hestrin-Schramm medium is expensive for the isolation of nanocellulose-producing micro-organisms, the possibility of using gram flour-table sugar medium was investigated in this work. Qualitative screening of micro-organisms was done using cost-effective medium, i.e., gram flour-table sugar medium. Qualitative analysis of various nanocellulose-producing bacteria depicted that cellulose layer production occurred on both HS medium and gram flour-table sugar medium. The yield of nanocellulose was also better on air-liquid surface in case of gram flour-table sugar medium as compared to HS medium. 16S rRNA was used for molecular characterization of bacterial strain and the best nanocellulose producer was identified as Novacetimonas hansenii BMK-3_NC240423 (isolated from rotten banana). FTIR and FE-SEM studies of nanocellulose pellicle produced on HS medium and gram flour-table sugar medium demonstrated equivalent structural, morphological, and chemical properties. The cost of newly designed medium (0.01967 $/L) is nearly 90 times lower than the Hestrin-Schramm medium (1.748 $/L), which makes the screening of nanocellulose producers very cost-effective. A strategy of using gram flour extract-table sugar medium for the screening of nanocellulose-producing micro-organisms is a novel approach, which will drastically reduce the screening associated cost of cellulose-producing micro-organisms and also motivate the researchers/industries for comprehensive screening programme for getting high cellulose-producing microbes.

Stretchable and Durable Bacterial Cellulose-Based Thermocell with Improved Thermopower Density for Low-Grade Heat Harvesting.

Low-grade heat exists ubiquitously in the environment, and gel-state thermogalvanic cells (GTCs) can directly convert thermal energy into electricity by a redox reaction. However, their low ionic conductivity and poor mechanical properties are still insufficient for their potential applications. Here, we designed a bacterial cellulose (BC) nanofiber-macromolecular entanglement network to balance the GTC's thermopower and mechanical properties. Therefore, the BC-GTC shows a Seebeck coefficient of 3.84 mV K-1, an ionic conductivity of 108.5 mS cm-1, and a high specific output power density of 1760 µW m-2 K-2, which are much higher than most current literature. Further connecting 15 units of BC-GTCs, the output voltage of 3.35 V can be obtained at a temperature gradient of 65 K, which can directly power electronic devices such as electronic calculators, thermohydrometers, fans, and light-emitting diodes (LEDs). This work offers a promising method for developing high-performance and durable GTC in sustainable green energy.

Autonomously Assembled Living Capsules by Microbial Coculture for Enhanced Bacteriotherapy of Inflammatory Bowel Disease.

Microorganism-mediated self-assembling of living formulations holds great promise for disease therapy. Here, we constructed a prebiotic-probiotic living capsule (PPLC) by coculturing probiotics (EcN) with Gluconacetobacter xylinus (G. xylinus) in a prebiotic-containing fermentation broth. Through shaking the culture, G. xylinus secretes cellulose fibrils that can spontaneously encapsulate EcN to form microcapsules under shear forces. Additionally, the prebiotic present in the fermentation broth is incorporated into the bacterial cellulose network through van der Waals forces and hydrogen bonding. Afterward, the microcapsules were transferred to a selective LB medium, which facilitated the colonization of dense probiotic colonies within them. The in vivo study demonstrated that PPLC-containing dense colonies of EcN can antagonize intestinal pathogens and restore microbiota homeostasis by showing excellent therapeutic performance in treating enteritis mice. The in situ self-assembly of probiotics and prebiotics-based living materials provides a promising platform for the treatment of inflammatory bowel disease.

Functionalization of Bacterial Cellulose with the Antimicrobial Peptide KR-12 via Chimerical Cellulose-Binding Peptides.

Bacterial-derived cellulose (BC) has been studied as a promising material for biomedical applications, including wound care, due to its biocompatibility, water-holding capacity, liquid/gas permeability, and handleability properties. Although BC has been studied as a dressing material for cutaneous wounds, to date, BC inherently lacks antibacterial properties. The current research utilizes bifunctional chimeric peptides containing carbohydrate binding peptides (CBP; either a short version or a long version) and an antimicrobial peptide (AMP), KR-12. The secondary structure of the chimeric peptides was evaluated and confirmed that the α-helix structure of KR-12 was retained for both chimeric peptides evaluated (Long-CBP-KR12 and Short-CBP-KR12). Chimeric peptides and their individual components were assessed for cytotoxicity, where only higher concentrations of Short-CBP and longer timepoints of Short-CBP-KR12 exposure exhibited negative effects on metabolic activity, which was attributed to solubility issues. All KR-12-containing peptides exhibited antibacterial activity in solution against Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). The lipopolysaccharide (LPS) binding capability of the peptides was evaluated and the Short-CBP-KR12 peptide exhibited enhanced LPS-binding capabilities compared to KR-12 alone. Both chimeric peptides were able to bind to BC and were observed to be retained on the surface over a 7-day period. All functionalized materials exhibited no adverse effects on the metabolic activity of both normal human dermal fibroblasts (NHDFs) and human epidermal keratinocyte (HaCaT) epithelial cells. Additionally, the BC tethered chimeric peptides exhibited antibacterial activity against E. coli. Overall, this research outlines the design and evaluation of chimeric CBP-KR12 peptides for developing antimicrobial BC membranes with potential applications in wound care.

Abietic Acid as a Novel Agent against Ocular Biofilms: An In Vitro and Preliminary In Vivo Investigation.

Biofilm-related ocular infections can lead to vision loss and are difficult to treat with antibiotics due to challenges with application and increasing microbial resistance. In turn, the design and testing of new synthetic drugs is a time- and cost-consuming process. Therefore, in this work, for the first time, we assessed the in vitro efficacy of the plant-based abietic acid molecule, both alone and when introduced to a polymeric cellulose carrier, against biofilms formed by Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans in standard laboratory settings as well as in a self-designed setting using the topologically challenging surface of the artificial eye. These analyses were performed using the standard microdilution method, the biofilm-oriented antiseptic test (BOAT), a modified disk-diffusion method, and eyeball models. Additionally, we assessed the cytotoxicity of abietic acid against eukaryotic cell lines and its anti-staphylococcal efficacy in an in vivo model using Galleria mellonella larvae. We found that abietic acid was more effective against Staphylococcus than Pseudomonas (from two to four times, depending on the test applied) and that it was generally more effective against the tested bacteria (up to four times) than against the fungus C. albicans at concentrations non-cytotoxic to the eukaryotic cell lines and to G. mellonella (256 and 512 µg/mL, respectively). In the in vivo infection model, abietic acid effectively prevented the spread of staphylococcus throughout the larvae organisms, decreasing their lethality by up to 50%. These initial results obtained indicate promising features of abietic acid, which may potentially be applied to treat ocular infections caused by pathogenic biofilms, with higher efficiency manifested against bacterial than fungal biofilms.

Exploring Bacterial Cellulose and a Biosurfactant as Eco-Friendly Strategies for Addressing Pharmaceutical Contaminants.

Aquatic environments face contamination by pharmaceuticals, prompting concerns due to their toxicity even at low concentrations. To combat this, we developed an ecologically sustainable biosurfactant derived from a microorganism and integrated it into bacterial cellulose (BC). This study aimed to evaluate BC's efficacy, with and without the biosurfactant, as a sorbent for paracetamol and 17α-ethinylestradiol (EE2) in water. We cultivated BC membranes using Gluconacetobacter xylinus ATCC 53582 and synthesized the biosurfactant through pre-inoculation of Bacillus subtilis in a synthetic medium. Subsequently, BC membranes were immersed in the biosurfactant solution for incorporation. Experiments were conducted using contaminated water, analyzing paracetamol concentrations via spectrophotometry and EE2 levels through high-performance liquid chromatography. Results indicated BC's superior adsorption for EE2 over paracetamol. Incorporating the biosurfactant reduced hormone adsorption but enhanced paracetamol sorption. Notably, original and freeze-dried BC exhibited better adsorption efficacy than biosurfactant-infused BC. In conclusion, BC showed promise in mitigating EE2 contamination, suggesting its potential for environmental remediation. Future research could focus on optimizing biosurfactant concentrations to enhance sorption capabilities without compromising BC's inherent effectiveness.

Multi-Functional Repair and Long-Term Preservation of Paper Relics by Nano-MgO with Aminosilaned Bacterial Cellulose.

Paper relics, as carrieres of historical civilization's records and inheritance, could be severely acidic and brittle over time. In this study, the multi-functional dispersion of nanometer magnesium oxide (MgO) carried by 3-aminopropyl triethoxysilane-modified bacterial cellulose (KH550-BC) was applied in the impregnation process to repair aged paper, aiming at solving the key problems of anti-acid and strength recovery in the protection of ancient books. The KH550-BC/MgO treatment demonstrated enhanced functional efficacy in repairing aged paper, attributed to the homogeneous and stable distribution of MgO within the nanofibers of BC networks, with minimal impact on the paper's wettability and color. Furthermore, the treatment facilitated the formation of adequate alkali reserves and hydrogen bonding, resulting in superior anti-aging properties in the treated paper during prolonged preservation. Even after 30 days of hygrothermal aging tests, the paper repaired by KH550-BC/MgO was still in a gently alkaline environment (pH was about 7.56), alongside a 32.18% elevation compared to the untreated paper regarding the tear index. The results of this work indicate that KH550-BC/MgO is an effective reinforcement material for improving the long-term restoration of ancient books.

Application of scoby bacterial cellulose as hydrocolloids on physicochemical, textural and sensory characteristics of mango jam.

BACKGROUND: The scoby pellicle of symbiotic culture of bacteria and yeast is a by-product from kombucha fermentation. While a portion is used as starter culture, the remainder is often discarded, yet it can be a valuable source of bacterial cellulose. RESULTS: Scoby from black, green and oolong tea kombucha fermentation was assessed for its hydrocolloid effects in mango jam-making through evaluation of physicochemical, textural and sensory characteristics. Quality of jam was significantly improved with water activity reduction up to 22.22% to 0.679, moisture content reduction up to 37.06% to 19.92%, and a pH drop up to 5.9% to 3.19 with the use of 20 to 100 g kg-1 scoby. In colour analysis, presence of scoby led to a brighter jam due to higher L * $$ {L}^{\ast } $$ values from 30.98 to a range of 31.82 to 40.83. Texture of jam with scoby gave higher gel strength and adhesiveness, with the most prominent effects from the black tea kombucha. Overall acceptability in sensory test scoring was above 70% on a nine-point hedonic scale with the 40 g kg-1 green tea kombucha scoby jam chosen as the most preferred. CONCLUSION: Scoby gave significant contributions to jam stability, appearance and texture, showing potential as a clean-label food ingredient. © 2024 Society of Chemical Industry.