RESUMEN
BACKGROUND: Melia azedarach is known as a medicinal plant that has wide biological activities such as analgesic, antibacterial, and antifungal effects and is used to treat a wide range of diseases such as diarrhea, malaria, and various skin diseases. However, optimizing the extraction of valuable secondary metabolites of M. azedarach using alternative extraction methods has not been investigated. This research aims to develop an effective, fast, and environmentally friendly extraction method using Ultrasound-assisted extraction, methanol and temperature to optimize the extraction of two secondary metabolites, lupeol and stigmasterol, from young roots of M. azedarach using the response surface methodology. METHODS: Box-behnken design was applied to optimize different factors (solvent, temperature, and ultrasonication time). The amounts of lupeol and stigmasterol in the root of M. azedarach were detected by the HPLC-DAD. The required time for the analysis of each sample by the HPLC-DAD system was considered to be 8 min. RESULTS: The results indicated that the highest amount of lupeol (7.82 mg/g DW) and stigmasterol (6.76 mg/g DW) was obtained using 50% methanol at 45 °C and ultrasonication for 30 min, and 50% methanol in 35 °C, and ultrasonication for 30 min, respectively. Using the response surface methodology, the predicted conditions for lupeol and stigmasterol from root of M. azedarach were as follows; lupeol: 100% methanol, temperature 45 °C and ultrasonication time 40 min (14.540 mg/g DW) and stigmasterol 43.75% methanol, temperature 34.4 °C and ultrasonication time 25.3 min (5.832 mg/g DW). CONCLUSIONS: The results showed that the amount of secondary metabolites lupeol and stigmasterol in the root of M. azedarach could be improved by optimizing the extraction process utilizing response surface methodology.
Asunto(s)
Melia azedarach , Triterpenos Pentacíclicos , Estigmasterol , Triterpenos Pentacíclicos/metabolismo , Estigmasterol/metabolismo , Estigmasterol/aislamiento & purificación , Estigmasterol/química , Melia azedarach/química , Cromatografía Líquida de Alta Presión , Raíces de Plantas/química , Raíces de Plantas/metabolismo , Extractos Vegetales/química , Temperatura , Solventes/química , LupanosRESUMEN
Kojic acid is a wonderful fungal secondary metabolite that has several applications in the food, medical, and agriculture sectors. Many human diseases become resistant to normal antibiotics and normal treatments. We need to search for alternative treatment sources and understand their mode of action. Aspergillus flavus ASU45 (OL314748) was isolated from the caraway rhizosphere as a non-aflatoxin producer and identified genetically using 18S rRNA gene sequencing. After applying the Box-Behnken statistical design to maximize KA production, the production raised from 39.96 to 81.59 g/l utilizing (g/l) glucose 150, yeast extract 5, KH2PO4 1, MgSO4.7H2O 2, and medium pH 3 with a coefficient (R2) of 98.45%. Extracted KA was characterized using FTIR, XRD, and a scanning electron microscope. Crystalized KA was an effective antibacterial agent against six human pathogenic bacteria (Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, Serratia marcescens, and Serratia plymuthica). KA achieves high inhibition activity against Bacillus cereus, K. pneumonia, and S. plymuthica at 100 µg/ml concentration by 2.75, 2.85, and 2.85 compared with chloramphenicol which gives inhibition zones 1, 1.1, and 1.6, respectively. Crystalized KA had anticancer activity versus three types of cancer cell lines (Mcf-7, HepG2, and Huh7) and demonstrated high cytotoxic capabilities on HepG-2 cells that propose strong antitumor potent of KA versus hepatocellular carcinoma. The antibacterial and anticancer modes of action were illustrated using the molecular docking technique. Crystalized kojic acid from a biological source represented a promising microbial metabolite that could be utilized as an alternative antibacterial and anticancer agent effectively.
Asunto(s)
Antibacterianos , Antineoplásicos , Aspergillus flavus , Simulación del Acoplamiento Molecular , Pironas , Aspergillus flavus/efectos de los fármacos , Aspergillus flavus/metabolismo , Aspergillus flavus/genética , Pironas/farmacología , Pironas/química , Pironas/metabolismo , Antibacterianos/farmacología , Antibacterianos/química , Humanos , Antineoplásicos/farmacología , Antineoplásicos/química , Pruebas de Sensibilidad Microbiana , Línea Celular Tumoral , Bacterias/efectos de los fármacos , Bacterias/genética , Bacterias/metabolismo , Bacterias/clasificaciónRESUMEN
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate (ODHP) was extracted in a previous study from the culture broth of soil isolate Alcaligenes faecalis MT332429 and showed a promising antimycotic activity. This study was aimed to formulate ODHP loaded ß-cyclodextrins (CD) nanosponge (NS) hydrogel (HG) to control skin fungal ailments since nanosponges augment the retention of tested agents in the skin. Box-Behnken design was used to produce the optimized NS formulation, where entrapment efficiency percent (EE%), polydispersity index (PDI), and particle size (PS) were assigned as dependent parameters, while the independent process parameters were polyvinyl alcohol % (w/v %), polymer-linker ratio, homogenization time, and speed. The carbopol 940 hydrogel was then created by incorporating the nanosponges. The hydrogel fit Higuchi's kinetic release model the best, according to in vitro drug release. Stability and photodegradation studies revealed that the NS-HG remained stable under tested conditions. The formulation also showed higher in vitro antifungal activity against Candida albicans compared to the control fluconazole. In vivo study showed that ODHP-NS-HG increased survival rates, wound contraction, and healing of wound gap and inhibited the inflammation process compared to the other control groups. The histopathological examinations and Masson's trichrome staining showed improved healing and higher records of collagen deposition. Moreover, the permeability of ODHP-NS-HG was higher through rats' skin by 1.5-folds compared to the control isoconazole 1%. Therefore, based on these results, NS-HG formulation is a potential carrier for enhanced and improved topical delivery of ODHP. Our study is a pioneering research on the development of a formulation for ODHP produced naturally from soil bacteria. KEY POINTS: ⢠Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate was successfully formulated as a nanosponge hydrogel and statistically optimized. ⢠The new formula exhibited in vitro good stability, drug release, and higher antifungal activity against C. albicans as compared to the fluconazole. ⢠Ex vivo showed enhanced skin permeability, and in vivo analysis showed high antifungal activity as evidenced by measurement of various biochemical parameters and histopathological examination.
Asunto(s)
Alcaligenes faecalis , Butanos , Hidrogeles , Ratas , Animales , Antifúngicos/farmacología , Fluconazol , Propionatos , Candida albicans , Suelo , Tamaño de la PartículaRESUMEN
An amide-based covalent organic framework (COF) was successfully synthesized using the reaction between 1,3,5-trimesoyl chloride and ethylenediamine. The structure and morphology of the COF were characterized using Fourier-transform infrared spectra, nuclear magnetic resonance spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller surface area analysis. The COF was employed as a solid-phase extraction adsorbent for the sampling and preconcentration of chlorophenols from industrial wastewater samples prior to high-performance liquid chromatography with ultraviolet detection. The experimental parameters influencing the extraction efficiency including type and volume of eluent solvent, sample solution volume, salt concentration, sample flow rate, and sample solution pH were investigated and optimized using a response surface methodology employing Box-Behnken-design. Under optimized conditions, calibration curves exhibited good linearities over the range of 0.003-10 µg/mL with determination coefficients (R2) ranging from 0.9982 to 0.9999. The method's limits of detection ranged from 0.001 to 0.01 µg/mL. Good repeatability was achieved with relative standard deviations below 4.7%. The developed procedure utilizing the COF adsorbent was successfully applied to determine chlorophenols accurately and precisely in various industrial wastewater samples.
RESUMEN
Omega-3 polyunsaturated fatty acids (n-3 PUFAs), mainly including α-linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), possess antioxidant properties and play a crucial role in growth and development. However, the combined effects of ALA, EPA, and DHA at different concentrations have rarely been reported. This work explored the effects of EPA, ALA, and DHA on the viability and antioxidant capacity of mouse hepatocytes, with the objective of enhancing the antioxidant capacity. Within the appropriate concentration range, cell viability and the activity of glutathione S-transferase, superoxide dismutase, and catalase were increased, while the oxidation products of malondialdehyde and the level of intracellular reactive oxygen species were obviously reduced. Thus, oxidative stress was relieved, and cellular antioxidant levels were improved. Finally, response surface optimization was carried out for EPA, ALA, and DHA, and the model was established. The antioxidant capacity of the cells was highest at EPA, ALA, and DHA concentrations of 145.46, 405.05, and 551.52 µM, respectively. These findings lay the foundation for further exploration of the interactive mechanisms of n-3 PUFAs in the body, as well as their applications in nutraceutical food.
Asunto(s)
Antioxidantes , Supervivencia Celular , Ácidos Docosahexaenoicos , Ácido Eicosapentaenoico , Ácidos Grasos Omega-3 , Hepatocitos , Estrés Oxidativo , Especies Reactivas de Oxígeno , Superóxido Dismutasa , Animales , Ratones , Hepatocitos/metabolismo , Hepatocitos/efectos de los fármacos , Antioxidantes/farmacología , Antioxidantes/metabolismo , Estrés Oxidativo/efectos de los fármacos , Ácidos Grasos Omega-3/farmacología , Ácido Eicosapentaenoico/farmacología , Ácidos Docosahexaenoicos/farmacología , Especies Reactivas de Oxígeno/metabolismo , Supervivencia Celular/efectos de los fármacos , Superóxido Dismutasa/metabolismo , Catalasa/metabolismo , Malondialdehído/metabolismo , Ácido alfa-Linolénico/farmacología , Glutatión Transferasa/metabolismoRESUMEN
The current work limns the preparation of naringin-loaded transnioosomes (NRN-TN) to enhance NRN solubility, permeation and bioavailability via nasal mucosa for intranasal delivery. NRN-TN was created by the thin-film hydration technique, and with the BBD (Box-Behnken design), optimisation was carried out. NRN-TNopt was characterised for the vesicle size, PDI (Polydispersity index), zeta potential, entrapment efficiency (EE) and in vitro NRN release. For further assessment, nasal permeation study, study of Blood-brain distribution, TEM (Transmission Electron Microscopy), and CLSM (Confocal Scanning Laser Microscopy) were conducted withal. The NRN-TNopt exhibited spherical as well as sealed vesicles with a considerable small size of 151.3 nm, an EE of 75.23 percent, a PDI of 0.1257, and an in vitro release of 83.32 percent. CLSM investigation revealed that the new formulation allows for higher NRN permeation across nasal mucosa than the NRN solution. The blood-brain distribution investigation revealed that intranasally administered NRN-TN had a greater Cmax and AUC0-24 h than orally administered NRN-TN. Seizure activity and neuromuscular coordination as measured by the rotarod test, biochemical estimate of oxidative stress indicators, and histological investigations demonstrated that the NRN-TN has superior anti-epileptic potential in comparison to the standard diazepam. In addition, nasal toxicity studies demonstrate that the NRN-TN formulation is safer for intranasal administration. This study confirmed that the created TN vesicle formulation is a valuable carrier for the intranasal administration of NRN for the treatment of epilepsy.
Asunto(s)
Barrera Hematoencefálica , Epilepsia , Flavanonas , Humanos , Liposomas , Encéfalo , Administración Intranasal , Epilepsia/tratamiento farmacológico , Tamaño de la Partícula , Portadores de Fármacos , Sistemas de Liberación de Medicamentos/métodosRESUMEN
This study aimed to design and develop novel surface-engineered Depofoam formulations to extend the drug delivery to the prescribed time. The objectives are to prevent the formulation from burst release, rapid clearance by tissue macrophages, and instability and to analyze the impact of process and material variables in the characteristics of formulations. This work employed a quality-by-design coupled failure modes and effects analysis (FMEA)-risk assessment strategy. The factors for the experimental designs were chosen based on the FMEA results. The formulations were prepared by the double emulsification method followed by surface modification and characterized in terms of critical quality attributes (CQAs). The experimental data for all these CQAs were validated and optimized using the Box-Behnken design. A comparative drug release experiment was studied by the modified dissolution method. Furthermore, the stability of the formulation was also assessed. In addition, the impact of critical material attributes and critical process parameters on CQAs was evaluated using FMEA risk assessment. The optimized formulation method yielded high encapsulation efficiency (86.24 ± 0.69%) and loading capacity (24.13 ± 0.54%) with an excellent zeta potential value (-35.6 ± 4.55mV). The comparative in vitro drug release studies showed that more than 90% of the drug's release time from the surface-engineered Depofoam was sustained for up to 168 h without burst release and ensured colloidal stability. These research findings revealed that Depofoam prepared with optimized formulation and operating conditions yielded stable formulation, protected the drug from burst release, provided a prolonged release, and sufficiently controlled the drug release rate.
Asunto(s)
Análisis de Modo y Efecto de Fallas en la Atención de la Salud , Liposomas , Preparaciones de Acción Retardada , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos , Tamaño de la PartículaRESUMEN
Recently, metformin (Met) has shown to have antineoplastic properties in cancer treatment by improving hypoxic tumor conditions, and causing reduction in the synthesis of biomolecules, which are vital for cancer growth. However, as an orally administered drug, Met has low bioavailability and rapid renal clearance. Thus, the goal of this study was to vectorize Met inside liposomes in the context of triple negative breast cancer (TNBC), which currently lacks treatment options when compared to other types of breast cancer. Vectorization of Met inside liposomes was done using Bangham method by implementing double design of experiment methodology to increase Met drug loading (minimum-run resolution V characterization design and Box-Behnken design), as it is generally extremely low for hydrophilic molecules. Optimization of Met-loaded liposome synthesis was successfully achieved with drug loading of 190 mg/g (19% w/w). The optimal Met-liposomes were 170 nm in diameter with low PdI (< 0.1) and negative surface charge (-20 mV), exhibiting sustained Met release at pH 7.4. The liposomal Met delivery system was stable over several months, and successfully reduced TNBC cell proliferation due to the encapsulated drug. This study is one the first reports addressing liposome formulation through thin-film hydration using two design of experiment methods aiming to increase drug loading of Met.
RESUMEN
Statistical analysis is essential for minimizing the time, cost, and number of experiments needed to get the maximum output. In this work, the removal of cadmium bivalent (Cd (II)) ions was optimized using Box-Behnken design methodology. The effects of pH, concentration, time, and temperature were investigated for the removal of cadmium. Maximum removal (85.70%) was achieved at pH of 5.34, initial Cd(II) ions concentration 46.61,contact time 166.09 (min), and at 59.40 oC temperature on Punica Granatum carpellary membrane powder (PGCMP) and 88.61% removal was achieved on its modified forms (MPGCMP) at pH of 5.79, initial Cd(II) ions concentration 65.70,contact time 178.96, and at 59.91 oC temperature. The model was validated by analyzing variance (ANOVA). The practical data was well fitted to the quadratic model. PGCMP and MPGCMP were found to be naturally occurring, environmentally friendly adsorbents for the mitigation of Cd (II) ions as well as other toxic heavy metals from drinkable or wastewater.
RESUMEN
In this study, a hydrothermal approach was employed to graft chitosan (Chit)/algae (ALG) with salicylaldehyde (SA), resulting in the synthesis of a biocomposite named salicylaldehyde-based chitosan Schiff base/algae (Chit-SA/ALG). The main objective of this biocomposite was to effectively remove methyl violet (MV), an organic dye, from aqueous solutions. The adsorption performance of Chit-SA/ALG toward MV was investigated in detail, considering the effects of three factors: (A) Chit-SA/ALG dose (ranging from 0.02 to 0.1 g/100 mL), (B) pH (ranging from 4 to 10), and (C) time (ranging from 10 to 120 min). The Box-Behnken design (BBD) was utilized for experimental design and analysis. The experimental results exhibited a good fit with both the pseudo-second-order kinetic model and the Freundlich isotherm, suggesting their suitability for describing the MV adsorption process on Chit-SA/ALG. The maximum adsorption capacity of Chit-SA/ALG, as calculated by the Langmuir model, was found to be 115.6 mg/g. The remarkable adsorption of MV onto Chit-SA/ALG can be primarily attributed to the electrostatic forces between Chit-SA/ALG and MV as well as the involvement of various interactions such as n-π, π-π, and H-bond interactions. This research demonstrates that Chit-SA/ALG exhibits promising potential as a highly efficient adsorbent for the removal of organic dyes from water systems.
The novelty of this work comes from introducing a new bio-organic based composite adsorbent of chitosan (Chit) biopolymer and algae (ALG) biomass. Moreover, the functionality and chemical stability of ChitALG composite was further developed by grafting process with salicylaldehyde (SA) using hydrothermal process. The incorporation of ALG biomass into polymeric matrix of Chit and grafting process with SA makes Chit a unique hybrid adsorbent toward cationic dye (methyl violet dye).
Asunto(s)
Aldehídos , Quitosano , Colorantes , Violeta de Genciana , Contaminantes Químicos del Agua , Quitosano/química , Adsorción , Colorantes/química , Cinética , Biodegradación AmbientalRESUMEN
In the present research, the seeds of Falcaria vulgaris were extracted from the investigated environment and used for crop cultivation. This study has focused on the efficiency evaluation of Falcaria vulgaris biomass (FVB) in cobalt ions removal from aqueous solutions. The biosorbent was characterized using FTIR, BET, EDAX-EDS, and SEM. The optimal conditions were determined by the response surface methodology (RSM) based on a Box-Behnken design (BBD) model. The BBD model had R2, Radj2 and Rpred2 values of 0.9919, 0.9774, and 0.8929, respectively. The cobalt removal under different conditions of the BBD model varied from 36.14% to 82.11%. Based on the numerical optimization of the quadratic model, the maximum cobalt removal at a biosorbent-to-metal ratio of 10:1, pH = 4.88 and contact time of 70 min was calculated at 80.941%. The high accuracy of the model in predicting the optimal conditions for cobalt adsorption by FVB was confirmed using statistical analysis and validation tests. The adsorption process of FVB also follows a pseudo-second-order kinetic model, which suggests that the rate-controlling step in cobalt removal is the chemical interaction between functional groups in FVB and Co+2 ions. This study shows that FVB, a low-cost biosorbent, can be a suitable candidate for removing heavy metals such as cobalt from aqueous solutions.
In this research, the FVB biosorbent was prepared after seed extraction and planting of Falcaria vulgaris and then characterized and applied to cobalt adsorption. In addition, the operating parameters that affect metal adsorption were optimized using the RSM based on a BBD model. The FVB, in optimized conditions, as an efficient biosorbent, considerably has the potential for the adsorptive removal of metal ions from aquatic environments.
Asunto(s)
Contaminantes Químicos del Agua , Biomasa , Contaminantes Químicos del Agua/química , Concentración de Iones de Hidrógeno , Biodegradación Ambiental , Cobalto/análisis , Cinética , Adsorción , Agua/análisis , Iones/análisisRESUMEN
This work aims to apply the use of food-grade algae (FGA) composited with chitosan-benzaldehyde Schiff base biopolymer (CHA-BD) as a new adsorbent (CHA-BA/FGA) for methyl violet 2B (MV 2B) dye removal from aqueous solutions. The effect of three processing variables, including CHA-BA/FGA dosage (0.02-0.1 g/100 mL), pH solution (4-10), and contact duration (10-120 min) on the removal of MV 2B was investigated using the Box-Behnken design (BBD) model. Kinetic and equilibrium dye adsorption profiles reveal that the uptake of MV 2B dye by CHA-BA/FGA is described by the pseudo-second kinetics and the Langmuir models. The thermodynamics of the adsorption process (ΔG°, ΔH°, and ΔS°) reveal spontaneous and favorable adsorption parameters of MV 2B dye onto the CHA-BA/FGA biocomposite at ambient conditions. The CHA-BA/FGA exhibited the maximum ability to absorb MV 2B of 126.51 mg/g (operating conditions: CHA-BA/FGA dose = 0.09 g/100 mL, solution pH = 8.68, and temperature = 25 °C). Various interactions, including H-bonding, electrostatic forces, π-π stacking, and n-π stacking provide an account of the hypothesized mechanism of MV 2B adsorption onto the surface of CHA-BA/FGA. This research reveals that CHA-BA/FGA with its unique biocomposite structure and favorable adsorption properties can be used to remove harmful cationic dyes from wastewater.
The first novel aspect of this research work comes from the utilization of food-grade algae which contains various types of negative functional groups hydroxyl, carboxyl, and phosphate to modify a cationic biopolymer (Chitosan) to improve its adsorptive property toward removal of a cationic dye such as methyl violet 2B. The second novel aspect of this research work is to use the hydrothermal process to assist the grafting of an aromatic ring of benzaldehyde into the polymer matrix of the chitosan-food grade algae composite via a Schiff base linkage to improve its chemical stability and functionality.
Asunto(s)
Quitosano , Colorantes de Rosanilina , Contaminantes Químicos del Agua , Colorantes/química , Quitosano/química , Violeta de Genciana/química , Bases de Schiff/química , Benzaldehídos , Concentración de Iones de Hidrógeno , Biodegradación Ambiental , Termodinámica , Adsorción , Cinética , Contaminantes Químicos del Agua/químicaRESUMEN
In this investigation, microwave irradiation assisted by ZnCl2 was used to transform pineapple crown (PN) waste into mesoporous activated carbon (PNAC). Complementary techniques were employed to examine the physicochemical characteristics of PNAC, including BET, FTIR, SEM-EDX, XRD, and pH at the point-of-zero-charge (pHpzc). PNAC is mesoporous adsorbent with a surface area of 1070 m2/g. The statistical optimization for the adsorption process of two model cationic dyes (methylene blue: MB and, crystal violet: CV) was conducted using the response surface methodology-Box-Behnken design (RSM-BBD). The parameters include solution pH (4-10), contact time (2-12) min, and PNAC dosage (0.02-0.1 g/100 mL). The Freundlich and Langmuir models adequately described the dye adsorption isotherm results for the MB and CV systems, whereas the pseudo-second order kinetic model accounted for the time dependent adsorption results. The maximum adsorption capacity (qmax) for PNAC with the two tested dyes are listed: 263.9 mg/g for CV and 274.8 mg/g for MB. The unique adsorption mechanism of MB and CV dyes by PNAC implicates multiple contributions to the adsorption process such as pore filling, electrostatic forces, H-bonding, and π-π interactions. This study illustrates the possibility of transforming PN into activated carbon (PNAC) with the potential to remove two cationic dyes from aqueous media.
The novelty of this research work stems from the conversion of pineapple (Ananas comosus) crown wastes with no monetary value into an efficient activated carbon adsorbent with relatively high surface area. Furthermore, a fast and convenient microwave assisted ZnCl2 activation method was applied for producing the activated carbon (AC). The effectiveness of the produced AC was tested for the removal of two different cationic dyes: crystal violet (CV) and methylene blue (MB). A statistical optimization that employs a response surface methodology with the Box-Behnken design was employed to optimize the adsorption variables for the optimal dye removal. Moreover, the dye adsorption kinetics and thermodynamics, equilibrium isotherms, and the details of the adsorption process were reported herein.
Asunto(s)
Ananas , Contaminantes Químicos del Agua , Colorantes/química , Azul de Metileno/análisis , Azul de Metileno/química , Carbón Orgánico/química , Violeta de Genciana , Adsorción , Microondas , Biodegradación Ambiental , Cinética , Contaminantes Químicos del Agua/análisis , Concentración de Iones de HidrógenoRESUMEN
INTRODUCTION: The recovery process for bioactives from discarded by-products of the winemaking industry is of great value considering both environmental and economic aspects. OBJECTIVE: The goal of this study is to investigate the extraction of phenolic antioxidants from grape (Vitis vinifera) seeds by means of carboxylic acid-based deep eutectic solvents (DESs) in order to propose an environmentally friendly method based on a multivariate optimization approach. MATERIAL AND METHODS: Carboxylic acid-based DESs were designed with several molar ratios (1/1, 1/2, and 2/1). Two polyols (glycerol and ethylene glycol) were used as hydrogen bond donors, while formic acid, acetic acid, and propionic acid were selected as hydrogen bond acceptors. The process parameters (water content, extraction time, and solid mass) were analyzed to optimize the process through Box-Behnken design with response surface method, after determination of the best combination for the highest total phenolic content (TPC) and the antioxidant activity yields. RESULTS: The maximum TPC yield (153.17 ± 0.003 mg-GAE/g-GS) and antioxidant activity yield (82.26 ± 0.004 mg-GAE/g-GS) were achieved by 50% water addition into the DES (ethylene glycol/acetic acid, 1/1), 85 sec extraction time, and 0.1 g grape seed.
RESUMEN
INTRODUCTION: The fruit wastes, in particular agricultural wastes, are considered potential and inexpensive sources of bioactive compounds. OBJECTIVE: The current study was aimed at the preparation of an optimized extract of sugarcane bagasse using microwave-assisted extraction (MAE) technology and comparative evaluation of chemical composition, antioxidant, and antidiabetic activities with extract prepared through maceration technique. METHODOLOGY: Box-Behnken Design (BDD) with response surface methodology was applied to observe interactions of three independent variables (ethanol concentrations [%], microwave power [W], and extraction time [min]) on the dependent variables (total phenolic content [TPC] and antioxidant status via 2,2-diphenyl-1-picrylhydrazyl [DPPH] to establish optimal extraction conditions. The ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC-Q-TOF-MS) analysis was applied for untargeted metabolite profiling, and in vitro assays were used for evaluation of the antidiabetic and antioxidant potential of the extract. Moreover, an in silico study was used to predict the interaction of five dominant compounds from the UHPLC-Q-TOF-MS profile against the dipeptidyl peptidase-IV (DPP-IV) enzyme. RESULTS: The optimal conditions for the extraction were established at 60% (v/v) ethanol, 500 W microwave power, and 5 min time with TPC 12.83 ± 0.66 mg GAE/g d.w. and DPPH 45.09 ± 0.07%. The UHPLC-Q-TOF-MS analysis revealed the presence of a total of 106 compounds in the extract. Moreover, the extract prepared through MAE technology presented higher TPC and DPPH findings than the extract prepared through maceration. Similarly, the extract was also found with good antidiabetic activity by inhibiting the DPP-IV enzyme which was also rectified theoretically by a molecular docking study. CONCLUSION: The current study presents a sustainable and an optimized approach for the preparation of sugarcane bagasse extract with functional phytoconstituents and higher antidiabetic and antioxidant activities.
RESUMEN
OBJECTIVE: The development of Mirtazapine (MRT)-loaded aquasomes by co-precipitation sonication technique to boost the antidepressant potential of MRT. METHODOLOGY: MRT-loaded aquasomes formulations were prepared using Box-Behnken design to investigate the effect of independent factors including sonication time (X1), sonication temperature (X2), and sugar concentration (X3) on the dependent variables as particle size and drug loading efficiency. The formulation of the optimized formula was verified by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and X-ray Powder Diffraction (XRPD). Furthermore, the morphology of the formula was evaluated by Transmission Electron Microscopy (TEM). The optimum MRT- loaded aquasomes was assessed for physiochemical properties, in vitro MRT release and in vivo antidepressant effects in mice model. RESULTS: The results revealed that the optimized formula showed a small particle size of 202.7 ± 3.7 nm and a high loading efficiency of 77.65 ± 2.6%. Thermal DSC and XRPD studies demonstrated the amorphous nature of MRT-loaded aquasomes. The in vitro study demonstrated sustained release of F (opt) 88.16% after 8 h, compared with plain MRT release of 63.06% after 1 h. Mice treated with MRT-loaded aquasomes demonstrated reduced immobility time in behavioral analysis to 37% with MRT-loaded aquasomes, while plain MRT reduced it to 55%. CONCLUSION: These results confirmed that the antidepressant effect of MRT was significantly boosted in formulated aquasomes, and thereby they provide a promising carrier nano vesicular system for effective delivery of MRT.
Asunto(s)
Sistemas de Liberación de Medicamentos , Nanopartículas , Ratones , Animales , Sistemas de Liberación de Medicamentos/métodos , Mirtazapina , Nanopartículas/química , Difracción de Rayos X , Antidepresivos/farmacología , Tamaño de la Partícula , Portadores de Fármacos/químicaRESUMEN
OBJECTIVE: This study aimed to develop a mixed polymeric micelle formulation incorporating candesartan cilexetil (CAND) drug to enhance its oral bioavailability for the better treatment of hypertension. METHODS: A Box-Behnken design was utilized to optimize the CAND-incorporated mixed polymeric micelles formulation (CAND-PFLC) consisting of Pluronics (P123 and F68) and lecithin (LC). The optimized CAND-PFLC micelles formulation was characterized for size, shape, zeta potential, polydispersity index (PDI), and entrapment efficiency (%EE). An in vitro release study, ex vivo permeability investigation, and an in vivo pharmacokinetic analysis were carried out to evaluate the performance of the formulation. RESULTS: The optimized CAND-PFLC micelles formulation demonstrated a spherical shape, a particle size of 44 ± 2.03 nm, a zeta potential of -7.07 ± 1.39 mV, a PDI of 0.326 ± 0.06, and an entrapment efficiency of 87 ± 3.12%. The formulation exhibited excellent compatibility, better stability, and a noncrystalline nature. An in vitro release study revealed a faster drug release of 7.98% at gastric pH in 2 hrs and 94.45% at intestinal pH within 24 hrs. The ex vivo investigation demonstrated a significantly enhanced permeability of CAND, with 94.86% in the micelle formulation compared to 9.03% of the pure drug. In vivo pharmacokinetic analysis showed a 4.11-fold increase in oral bioavailability of CAND compared to the marketed formulation. CONCLUSION: The CAND-PFLC mixed micelle formulation demonstrated improved performance compared to pure CAND, indicating its potential as a promising oral drug delivery system for the effective treatment of hypertension.
Asunto(s)
Bencimidazoles , Compuestos de Bifenilo , Hipertensión , Micelas , Tetrazoles , Humanos , Poloxámero/química , Lecitinas , Disponibilidad Biológica , Antihipertensivos , Administración Oral , Liberación de Fármacos , Polímeros/química , Portadores de Fármacos/química , Tamaño de la PartículaRESUMEN
Moringa oleifera leaves are rich sources of bioactive compounds with potential health benefits, including antioxidants and anti-inflammatory agents. Pressurized liquid extraction (PLE) stands out as a promising technique for effectively extracting valuable compounds from natural sources. In this study, we aimed to optimize PLE parameters, such as temperature, extraction duration, and pressure, to maximize bioactive compound (polyphenols, flavonoids, and ascorbic acid) yield from M. oleifera leaves and evaluate their antioxidant and anti-inflammatory activities. According to the outcomes of this research, the maximum achieved total polyphenol content was 24.10 mg gallic acid equivalents (GAE)/g of dry weight (dw), and the total flavonoid content was increased up to 19.89 mg rutin equivalents (RtE)/g dw. Moreover, after HPLC-DAD analysis, neochlorogenic and chlorogenic acids, catechin and epicatechin, rutin, and narirutin were identified and quantified. As far as the optimum ascorbic acid content is concerned, it was found to be 4.77 mg/g dw. The antioxidant activity was evaluated by three different methods: ferric reducing antioxidant power (FRAP), the DPPH method, and the anti-hydrogen peroxide activity (AHPA) method, resulting in 124.29 µmol ascorbic acid equivalent (AAE)/g dw, 131.28 µmol AAE/g dw, and 229.38 µmol AAE/g dw values, respectively. Lastly, the albumin denaturation inhibition was found to be 37.54%. These findings underscore the potential of PLE as an efficient extraction method for preparing extracts from M. oleifera leaves with the maximum content of bioactive compounds.
Asunto(s)
Antioxidantes , Moringa oleifera , Extractos Vegetales , Hojas de la Planta , Moringa oleifera/química , Hojas de la Planta/química , Antioxidantes/farmacología , Antioxidantes/química , Antioxidantes/aislamiento & purificación , Extractos Vegetales/farmacología , Extractos Vegetales/química , Flavonoides/aislamiento & purificación , Flavonoides/análisis , Flavonoides/química , Flavonoides/farmacología , Polifenoles/aislamiento & purificación , Polifenoles/farmacología , Polifenoles/análisis , Polifenoles/química , Ácido Ascórbico/farmacología , Antiinflamatorios/farmacología , Antiinflamatorios/química , Antiinflamatorios/aislamiento & purificación , Cromatografía Líquida de Alta Presión/métodos , Presión , Extracción Líquido-Líquido/métodos , Fitoquímicos/química , Fitoquímicos/farmacología , Fitoquímicos/aislamiento & purificaciónRESUMEN
Laying hen manure (LHM) is a major source of pollution due to its high nitrogen (N) and moisture content (MC). Therefore, reducing the MC of LHM is necessary to retain its recyclable value and reduce environmental pollution. One effective way is by incorporating sodium bentonite (SB) and wheat straw (WS) as amendments in the LHM. This work aimed to optimize the drying conditions of LHM and investigate the effect of SB and WS utilization on the dehydration rate, reduction of crude protein (CP), and reduction of ammonium-N (N [Formula: see text] -N). The response surface methodology (RSM) was used to optimize these processes. For this purpose, two sets of experiments (drying of LHM with and without SB and Ws) were designed. The independent parameters were air temperature (70, 80, and 90 °C), air velocity (1, 1.5, and 2 m s-1), layer thickness (5, 10, and 15 mm), SB (2%, 4%, and 6%), and WS (3%, 7.5%, and 12%). The results indicated that temperature and WS had the most significant influence on all responses. To maximize the dehydration rate and minimize the reduction of CP and N [Formula: see text] -N, the optimal conditions were a temperature of 78 °C, air velocity of 1 m s-1, and layer thickness of 5 mm in the first set of experiments, and a temperature of 80 °C, air velocity of 1.5 m s-1, layer thickness of 11 mm, 6% SB, and 12% WS in the second set of experiments. Under the optimum conditions, LHM treated with 6% SB and 12% WS retained 10% more CP and 58% more N [Formula: see text] -N than untreated LHM. Therefore, according to the obtained results, SB and WS are recommended as additives to reduce the CP and N [Formula: see text] -N losses of LHM during the drying process.
Asunto(s)
Compuestos de Amonio , Estiércol , Animales , Femenino , Triticum , Bentonita , Pollos , Deshidratación , SodioRESUMEN
Ammonia recovery from wastewater has positive environmental benefits, avoiding eutrophication and reducing production energy consumption, which is one of the most effective ways to manage nutrients in wastewater. Specifically, ammonia recovery by membrane distillation has been gradually adopted due to its excellent separation properties for volatile substances. However, the global optimization of direct contact membrane distillation (DCMD) operating parameters to maximize ammonia recovery efficiency (ARE) has not been attempted. In this work, three key operating factors affecting ammonia recovery, i.e., feed ammonia concentration, feed pH, and DCMD running time, were identified from eight factors, by a two-level Plackett-Burman Design (PBD). Subsequently, Box-Behnken design (BBD) under the response surface methodology (RSM) was used to model and optimize the significant operating parameters affecting the recovery of ammonia though DCMD identified by PBD and statistically verified by analysis of variance (ANOVA). Results showed that the model had a high coefficient of determination value (R2 = 0.99), and the interaction between NH4Cl concentration and feed pH had a significant effect on ARE. The optimal operating parameters of DCMD as follows: NH4Cl concentration of 0.46 g/L, feed pH of 10.6, DCMD running time of 11.3 h, and the maximum value of ARE was 98.46%. Under the optimized conditions, ARE reached up to 98.72%, which matched the predicted value and verified the validity and reliability of the model for the optimization of ammonia recovery by DCMD process.