Cell Membranes Resist Flow.

The fluid-mosaic model posits a liquid-like plasma membrane, which can flow in response to tension gradients. It is widely assumed that membrane flow transmits local changes in membrane tension across the cell in milliseconds, mediating long-range signaling. Here, we show that propagation of membrane tension occurs quickly in cell-attached blebs but is largely suppressed in intact cells. The failure of tension to propagate in cells is explained by a fluid dynamical model that incorporates the flow resistance from cytoskeleton-bound transmembrane proteins. Perturbations to tension propagate diffusively, with a diffusion coefficient Dσ ∼0.024 µm2/s in HeLa cells. In primary endothelial cells, local increases in membrane tension lead only to local activation of mechanosensitive ion channels and to local vesicle fusion. Thus, membrane tension is not a mediator of long-range intracellular signaling, but local variations in tension mediate distinct processes in sub-cellular domains.

Harnessing elastic instabilities for enhanced mixing and reaction kinetics in porous media.

Turbulent flows have been used for millennia to mix solutes; a familiar example is stirring cream into coffee. However, many energy, environmental, and industrial processes rely on the mixing of solutes in porous media where confinement suppresses inertial turbulence. As a result, mixing is drastically hindered, requiring fluid to permeate long distances for appreciable mixing and introducing additional steps to drive mixing that can be expensive and environmentally harmful. Here, we demonstrate that this limitation can be overcome just by adding dilute amounts of flexible polymers to the fluid. Flow-driven stretching of the polymers generates an elastic instability, driving turbulent-like chaotic flow fluctuations, despite the pore-scale confinement that prohibits typical inertial turbulence. Using in situ imaging, we show that these fluctuations stretch and fold the fluid within the pores along thin layers ("lamellae") characterized by sharp solute concentration gradients, driving mixing by diffusion in the pores. This process results in a [Formula: see text] reduction in the required mixing length, a [Formula: see text] increase in solute transverse dispersivity, and can be harnessed to increase the rate at which chemical compounds react by [Formula: see text]-enhancements that we rationalize using turbulence-inspired modeling of the underlying transport processes. Our work thereby establishes a simple, robust, versatile, and predictive way to mix solutes in porous media, with potential applications ranging from large-scale chemical production to environmental remediation.

4D microvelocimetry reveals multiphase flow field perturbations in porous media.

Many environmental and industrial processes depend on how fluids displace each other in porous materials. However, the flow dynamics that govern this process are still poorly understood, hampered by the lack of methods to measure flows in optically opaque, microscopic geometries. We introduce a 4D microvelocimetry method based on high-resolution X-ray computed tomography with fast imaging rates (up to 4 Hz). We use this to measure flow fields during unsteady-state drainage, injecting a viscous fluid into rock and filter samples. This provides experimental insight into the nonequilibrium energy dynamics of this process. We show that fluid displacements convert surface energy into kinetic energy. The latter corresponds to velocity perturbations in the pore-scale flow field behind the invading fluid front, reaching local velocities more than 40 times faster than the constant pump rate. The characteristic length scale of these perturbations exceeds the characteristic pore size by more than an order of magnitude. These flow field observations suggest that nonlocal dynamic effects may be long-ranged even at low capillary numbers, impacting the local viscous-capillary force balance and the representative elementary volume. Furthermore, the velocity perturbations can enhance unsaturated dispersive mixing and colloid transport and yet, are not accounted for in current models. Overall, this work shows that 4D X-ray velocimetry opens the way to solve long-standing fundamental questions regarding flow and transport in porous materials, underlying models of, e.g., groundwater pollution remediation and subsurface storage of CO2 and hydrogen.

Accurate prediction of discontinuous crack paths in random porous media via a generative deep learning model.

Pore structures provide extra freedoms for the design of porous media, leading to desirable properties, such as high catalytic rate, energy storage efficiency, and specific strength. This unfortunately makes the porous media susceptible to failure. Deep understanding of the failure mechanism in microstructures is a key to customizing high-performance crack-resistant porous media. However, solving the fracture problem of the porous materials is computationally intractable due to the highly complicated configurations of microstructures. To bridge the structural configurations and fracture responses of random porous media, a unique generative deep learning model is developed. A two-step strategy is proposed to deconstruct the fracture process, which sequentially corresponds to elastic deformation and crack propagation. The geometry of microstructure is translated into a scalar of elastic field as an intermediate variable, and then, the crack path is predicted. The neural network precisely characterizes the strong interactions among pore structures, the multiscale behaviors of fracture, and the discontinuous essence of crack propagation. Crack paths in random porous media are accurately predicted by simply inputting the images of targets, without inputting any additional input physical information. The prediction model enjoys an outstanding performance with a prediction accuracy of 90.25% and possesses a robust generalization capability. The accuracy of the present model is a record so far, and the prediction is accomplished within a second. This study opens an avenue to high-throughput evaluation of the fracture behaviors of heterogeneous materials with complex geometries.

Multiscale drainage dynamics with Haines jumps monitored by stroboscopic 4D X-ray microscopy.

Slow multiphase flow in porous media is intriguing because its underlying dynamics is almost deterministic, yet depends on a hierarchy of spatiotemporal processes. There has been great progress in the experimental study of such multiphase flows, but three-dimensional (3D) microscopy methods probing the pore-scale fluid dynamics with millisecond resolution have been lacking. Yet, it is precisely at these length and time scales that the crucial pore-filling events known as Haines jumps take place. Here, we report four-dimensional (4D) (3D + time) observations of multiphase flow in a consolidated porous medium as captured in situ by stroboscopic X-ray micro-tomography. With a total duration of 6.5 s and 2 kHz frame rate, our experiments provide unprecedented access to the multiscale liquid dynamics. Our tomography strategy relies on the fact that Haines jumps, although irregularly spaced in time, are almost deterministic, and therefore repeatable during imbibition-drainage cycling. We studied the time-dependent flow pattern in a porous medium consisting of sintered glass shards. Exploiting the repeatability, we could combine the radiographic projections recorded under different angles during successive cycles into a 3D movie, allowing us to reconstruct pore-scale events, such as Haines jumps, with a spatiotemporal resolution that is two orders of magnitude higher than was hitherto possible. This high resolution allows us to explore the detailed interfacial dynamics during drainage, including fluid-front displacements and velocities. Our experimental approach opens the way to the study of fast, yet deterministic mesoscopic processes also other than flow in porous media.

Triggering interfacial instabilities during forced imbibition by adjusting the aspect ratio in depth-variable microfluidic porous media.

We present a comprehensive description of the aspect ratio impact on interfacial instability in porous media where a wetting liquid displaces a nonwetting fluid. Building on microfluidic experiments, we evidence imbibition scenarios yielding interfacial instabilities and macroscopic morphologies under different depth confinements, which were controlled by aspect ratio and capillary number. We report a phenomenon whereby a smaller aspect ratio of depth-variable microfluidic porous media and lower capillary number trigger interfacial instability during forced imbibition; otherwise, a larger aspect ratio of uniform-depth microfluidic porous media and higher capillary number will suppress the interfacial instability, which seemingly ignored or contradicts conventional expectations with compact and faceted growth during imbibition. Pore-scale theoretical analytical models, numerical simulations, as well as microfluidic experiments were combined for characteristics of microscopic interfacial dynamics and macroscopic displacement results as a function of aspect ratio, depth variation, and capillary number. Our results present a complete dynamic view of the imbibition process over a full range of regimes from interfacial stabilization to destabilization. We predict the mode of imbibition in porous media based on pore-scale interfacial behavior, which fits well with microfluidic experiments. The study provides insights into the role of aspect ratio in controlling interfacial instabilities in microfluidic porous media. The finding provides design or prediction principles for engineered porous media, such as microfluidic devices, membranes, fabric, exchange columns, and even soil and rocks concerning their desired immiscible imbibition behavior.

Intratumoral Heterogeneity Assessment of the Extracellular Bone Matrix and Immune Microenvironment in Osteosarcoma Using Digital Imaging to Predict Therapeutic Response.

The assessment of chemotherapy response in osteosarcoma (OS) based on the average percentage of viable cells is limited, as it overlooks the spatial heterogeneity of tumor cell response (foci of resistant cells), immune microenvironment, and bone microarchitecture. Despite the resulting positive classification for response to chemotherapy, some patients experience early metastatic recurrence, demonstrating that our conventional tools for evaluating treatment response are insufficient. We studied the interactions between tumor cells, immune cells (lymphocytes, histiocytes, and osteoclasts), and bone extracellular matrix (ECM) in 18 surgical resection samples of OS using multiplex and conventional immunohistochemistry (IHC: CD8, CD163, CD68, and SATB2), combined with multiscale characterization approaches in territories of good and poor response (GRT/PRT) to treatment. GRT and PRT were defined as subregions with <10% and ≥10% of viable tumor cells, respectively. Local correlations between bone ECM porosity and density of immune cells were assessed in these territories. Immune cell density was then correlated to overall patient survival. Two patterns were identified for histiocytes and osteoclasts. In poor responder patients, CD68 osteoclast density exceeded that of CD163 histiocytes but was not related to bone ECM load. Conversely, in good responder patients, CD163 histiocytes were more numerous than CD68 osteoclasts. For both of them, a significant negative local correlation with bone ECM porosity was found (P < .01). Moreover, in PRT, multinucleated osteoclasts were rounded and intermingled with tumor cells, whereas in GRT, they were elongated and found in close contact with bone trabeculae. CD8 levels were always low in metastatic patients, and those initially considered good responders rapidly died from their disease. The specific recruitment of histiocytes and osteoclasts within the bone ECM, and the level of CD8 represent new features of OS response to treatment. The associated prognostic signatures should be integrated into the therapeutic stratification algorithm of patients after surgery.

Scanning Electrochemical Microscopy Meets Optical Microscopy: Probing the Local Paths of Charge Transfer Operando in Booster-Microparticles for Flow Batteries.

Understanding the oxidation/reduction dynamics of secondary microparticles formed from agglomerated nanoscale primary particles is crucial for advancing electrochemical energy storage technologies. In this study, the behavior of individual copper hexacyanoferrate (CuHCF) microparticles is explored at both global and local scales combining scanning electrochemical microscopy (SECM), for electrochemical interrogation of a single, but global-scale microparticle, and optical microscopy monitoring to obtain a higher resolution dynamic image of the local electrochemistry within the same particle. Chronoamperometric experiments unveil a multistep oxidation/reduction process with varying dynamics. On the one hand, the global SECM analysis enables quantifying the charge transfer as well as its dynamics at the single microparticle level during the oxidation/reduction cycles by a redox mediator in solution. These conditions allow mimicking the charge storage processes in these particles when they are used as solid boosters in redox flow batteries. On the other hand, optical imaging with sub-particle resolution allows the mapping of local conversion rates and state-of-charge within individual CuHCF particles. These maps reveal that regions of different material loadings exhibit varying charge storage capacities and conversion rates. The findings highlight the significance of porous nanostructures and provide valuable insights for designing more efficient energy storage materials.

Long-time behaviour of a porous medium model with degenerate hysteresis.

Hysteresis in the pressure-saturation relation in unsaturated porous media, owing to surface tension on the liquid-gas interface, exhibits strong degeneracy in the resulting mass balance equation. As an extension of previous existence and uniqueness results, we prove that under physically admissible initial conditions and without mass exchange with the exterior, the unique global solution of the fluid diffusion problem exists and asymptotically converges as time tends to infinity to a possibly non-homogeneous mass distribution and an a priori unknown constant pressure.This article is part of the theme issue 'Non-smooth variational problems with applications in mechanics'.

Transport of polyethylene and polypropylene microplastics under the action of agricultural chemicals: Role of pesticide adjuvants and neonicotinoid active ingredients.

Understanding the impact of various agricultural chemical components on the fate and transport of microplastics (MPs) in the subsurface is essential. In this study, column experiments on saturated porous media were conducted to explore the influence of the coexistence environment of pesticide adjuvants (surfactants) and active ingredients (neonicotinoids) on the transport of polyethylene (PE) and polypropylene (PP) MPs. An anionic surfactant (sodium dodecyl sulfate (SDS)), a nonionic surfactant (nonylphenol ethoxylate (NP-40)), and three neonicotinoid insecticides (acetamiprid, dinotefuran, and nitenpyram) could independently increase MP migration by 9.31%-61.01% by improving the hydrophilicity. Acetamiprid or dinotefuran reduced the adhesion work of the binary system by competing with SDS for adsorption sites, thereby inhibiting PE mobility. However, nitenpyram in the mixture was not easily adsorbed on the surface of PE MPs together with SDS because of nitenpyram's high hydrophilicity. Neonicotinoid molecules could not reduce the hydrophilic modification of SDS on PP MPs by competing for adsorption sites. Owing to their weak charge and adhesion work of nonionic surfactants (-4.80 mV and 28.45 kT for PE and -8.21 mV and 17.64 kT for PP), neonicotinoids tended to occupy the adsorption sites originally belonging to NP-40. The long molecular chain of NP-40 made it difficult for high-concentration neonicotinoids to affect the adhesion on MPs. In addition, NP-40 was harder to peel off from the MP surface than SDS, leading to a larger MP transport ability in the sand column.

Capillary equilibrium of bubbles in porous media.

In geologic, biologic, and engineering porous media, bubbles (or droplets, ganglia) emerge in the aftermath of flow, phase change, or chemical reactions, where capillary equilibrium of bubbles significantly impacts the hydraulic, transport, and reactive processes. There has previously been great progress in general understanding of capillarity in porous media, but specific investigation into bubbles is lacking. Here, we propose a conceptual model of a bubble's capillary equilibrium associated with free energy inside a porous medium. We quantify the multistability and hysteretic behaviors of a bubble induced by multiple state variables and study the impacts of pore geometry and wettability. Surprisingly, our model provides a compact explanation of counterintuitive observations that bubble populations within porous media can be thermodynamically stable despite their large specific area by analyzing the relationship between free energy and bubble volume. This work provides a perspective for understanding dispersed fluids in porous media that is relevant to CO2 sequestration, petroleum recovery, and fuel cells, among other applications.

Stagnation points control chaotic fluctuations in viscoelastic porous media flow.

Viscoelastic flows through porous media become unstable and chaotic beyond critical flow conditions, impacting widespread industrial and biological processes such as enhanced oil recovery and drug delivery. Understanding the influence of the pore structure or geometry on the onset of flow instability can lead to fundamental insights into these processes and, potentially, to their optimization. Recently, for viscoelastic flows through porous media modeled by arrays of microscopic posts, Walkama et al. [D. M. Walkama, N. Waisbord, J. S. Guasto, Phys. Rev. Lett 124, 164501 (2020)] demonstrated that geometric disorder greatly suppressed the strength of the chaotic fluctuations that arose as the flow rate was increased. However, in that work, disorder was only applied to one originally ordered configuration of posts. Here, we demonstrate experimentally that, given a slightly modified ordered array of posts, introducing disorder can also promote chaotic fluctuations. We provide a unifying explanation for these contrasting results by considering the effect of disorder on the occurrence of stagnation points exposed to the flow field, which depends on the nature of the originally ordered post array. This work provides a general understanding of how pore geometry affects the stability of viscoelastic porous media flows.

Evidence for biosurfactant-induced flow in corners and bacterial spreading in unsaturated porous media.

The spread of pathogenic bacteria in unsaturated porous media, where air and liquid coexist in pore spaces, is the major cause of soil contamination by pathogens, soft rot in plants, food spoilage, and many pulmonary diseases. However, visualization and fundamental understanding of bacterial transport in unsaturated porous media are currently lacking, limiting the ability to address the above contamination- and disease-related issues. Here, we demonstrate a previously unreported mechanism by which bacterial cells are transported in unsaturated porous media. We discover that surfactant-producing bacteria can generate flows along corners through surfactant production that changes the wettability of the solid surface. The corner flow velocity is on the order of several millimeters per hour, which is the same order of magnitude as bacterial swarming, one of the fastest known modes of bacterial surface translocation. We successfully predict the critical corner angle for bacterial corner flow to occur based on the biosurfactant-induced change in the contact angle of the bacterial solution on the solid surface. Furthermore, we demonstrate that bacteria can indeed spread by producing biosurfactants in a model soil, which consists of packed angular grains. In addition, we demonstrate that bacterial corner flow is controlled by quorum sensing, the cell-cell communication process that regulates biosurfactant production. Understanding this previously unappreciated bacterial transport mechanism will enable more accurate predictions of bacterial spreading in soil and other unsaturated porous media.

Reduced phase stability and faster formation/dissociation kinetics in confined methane hydrate.

The mechanisms involved in the formation/dissociation of methane hydrate confined at the nanometer scale are unraveled using advanced molecular modeling techniques combined with a mesoscale thermodynamic approach. Using atom-scale simulations probing coexistence upon confinement and free energy calculations, phase stability of confined methane hydrate is shown to be restricted to a narrower temperature and pressure domain than its bulk counterpart. The melting point depression at a given pressure, which is consistent with available experimental data, is shown to be quantitatively described using the Gibbs-Thomson formalism if used with accurate estimates for the pore/liquid and pore/hydrate interfacial tensions. The metastability barrier upon hydrate formation and dissociation is found to decrease upon confinement, therefore providing a molecular-scale picture for the faster kinetics observed in experiments on confined gas hydrates. By considering different formation mechanisms-bulk homogeneous nucleation, external surface nucleation, and confined nucleation within the porosity-we identify a cross-over in the nucleation process; the critical nucleus formed in the pore corresponds either to a hemispherical cap or to a bridge nucleus depending on temperature, contact angle, and pore size. Using the classical nucleation theory, for both mechanisms, the typical induction time is shown to scale with the pore volume to surface ratio and hence the pore size. These findings for the critical nucleus and nucleation rate associated with such complex transitions provide a means to rationalize and predict methane hydrate formation in any porous media from simple thermodynamic data.

A Novel Image Processing Approach for Colloid Detection in Saturated Porous Media.

Over recent decades, natural and artificial colloids, as well as nanoparticles, have been increasingly used in various applications. Consequently, with this rising consumption, surface and subsurface environments are more exposed to these particles. The presence of these particles and the colloid-facilitated transport of microorganisms, the interactions between dissolved contaminants and mobile colloids in porous media, and the fate and transport of colloids through groundwater-one of the primary sources of water supply for human societies-have attracted extensive research. This study investigates the performance of several image processing methods in the field of colloid detection, which is a prerequisite for the subsequent steps in porous media research. We employed four different categories of image processing approaches on microscopy images-segmentation-based methods, background-detection-based methods, filter-based methods, and morphology-based methods-to conduct the detection process of colloids. Eight methods were applied and subsequently analyzed in terms of their drawbacks and advantages to determine the best ones in this domain. Finally, we proposed an ensemble approach that leverages the strengths of the three best methods using a majority vote to detect colloids more accurately. In experiments, Precision, Recall, F-measure, and TCR criteria were considered as evaluation tools. Experimental results demonstrate the high accuracy of image processing methods in recognizing colloids. Among all these methods, morphology-based methods were the most successful, achieving the best detection performance and improving the limited distinguishing features of small colloids. Moreover, our ensemble approach, achieving perfect scores across all evaluation criteria, highlights its superiority compared with other detection methods.

Analysis of 'Investigating an extended multiphase flow model that includes specific interfacial area', Computer Methods in Applied Mechanics and Engineering, 418:116594, 2024.

Comments are provided on the recent paper by Ebadi et al. [3], which demonstrates that the formulated model that was solved contains misconceptions or errors that render the work unsuitable for describing the evolution of interfacial areas in two-fluid porous medium systems. The need for kinematic equations is described and components of a theoretically consistent approach are summarized.

The clogging effect of nanoscale zero valent iron corrosion in bicarbonate anaerobic water on porous media: A real-time pore-scale visualization.

The corrosion-induced permeability changes of nanoscale zero-valent iron (NZVI) are one of the crucial factors constraining the successful application of NZVI in the remediation of contaminated groundwater. It is of great significance to study the dynamic evolution of corrosion products of NZVI after NZVI is injected into porous media and its influence on pore plugging effect from the pore scale. Micro computed tomography (Micro-CT) imaging technology, mineralogical characterization and theoretical calculations were used to understand the details of NZVI corrosion plugging porous media at the pore scale. This study reveals the factors of NZVI corrosion plugging porous media, namely, gas production (H2) in the early and middle stages of corrosion (before 90 days) and solid phase changes (NZVI volume increase and migration) in the later stages (after 90 days). The permeability loss rate of the porous media was 66.8%, 87.3%, 79.4%, and 53.6% at the corrosion times of 30, 60, 90, and 120 days, respectively. After 90 d of corrosion, the particle size of NZVI increases by 7.9%, and the secondary minerals formed by corrosion are mainly Fe3O4/γ-Fe2O3 and FeOOH. In addition, this study also found that the migration of NZVI after 90 d was due to its corrosion reducing the magnetic attraction between particles, dissociating into smaller particles or agglomerates under the action of fluid dynamics, resulting in its redistribution in the porous medium and causing blockage. This study clarifies that NZVI corrosion plays a vital influence in affecting the permeability and clogging of porous media, providing valuable guidance for optimizing NZVI-based remediation technologies.

Use of recycled construction and demolition waste as substrate in constructed wetlands for the wastewater treatment of cheese production.

Recycled building debris has recently emerged as a suitable wetland infill substrate due to its low density, exceptional water absorption capabilities, and high porosity. This study investigated, for the first time, the use of construction demolition wastes (CDW), and rock processing residues (RPR) as substrate materials in vertical-horizontal flow hybrid constructed wetlands for the treatment of cheese production wastewater. Results showed that the use of both CDW as well as RPR, as substrate material, provided an equal or even better quality of treated wastewater compared to the conventional use of gravel as a substrate. High removal efficiencies were recorded for turbidity (CDW: 91-92%, RPR: 97%), solids (CDW: 85-88%, RPR: 96-97%), organic matter (CDW: 79-84%, RPR: 96-98%), and total phosphorus (CDW: 72-76%, RPR: 87%) for both examined recycled materials. During the experiment, different loadings rates (HLR) were tested: 25 mm d-1 and 37.5 mm d-1. Radiological measurements indicate that, their use did not cause toxic effects on the environment, as the amounts of radioactivity found in the effluent of the systems are not significant. Increasing the hydraulic loading rate appeared to have no negative effect on pollutant removal, as the systems and plants were fully acclimated and mature. This approach offers several advantages, including the use of readily available and abundant waste material, potential cost savings, and the environmental benefits of recycling CDW and RPR instead of disposing of them in landfills.

Hyper-Ballistic Superdiffusion of Competing Microswimmers.

Hyper-ballistic diffusion is shown to arise from a simple model of microswimmers moving through a porous media while competing for resources. By using a mean-field model where swimmers interact through the local concentration, we show that a non-linear Fokker-Planck equation arises. The solution exhibits hyper-ballistic superdiffusive motion, with a diffusion exponent of four. A microscopic simulation strategy is proposed, which shows excellent agreement with theoretical analysis.

An in silico model of the capturing of magnetic nanoparticles in tumour spheroids in the presence of flow.

One of the main challenges in improving the efficacy of conventional chemotherapeutic drugs is that they do not reach the cancer cells at sufficiently high doses while at the same time affecting healthy tissue and causing significant side effects and suffering in cancer patients. To overcome this deficiency, magnetic nanoparticles as transporter systems have emerged as a promising approach to achieve more specific tumour targeting. Drug-loaded magnetic nanoparticles can be directed to the target tissue by applying an external magnetic field. However, the magnetic forces exerted on the nanoparticles fall off rapidly with distance, making the tumour targeting challenging, even more so in the presence of flowing blood or interstitial fluid. We therefore present a computational model of the capturing of magnetic nanoparticles in a test setup: our model includes the flow around the tumour, the magnetic forces that guide the nanoparticles, and the transport within the tumour. We show how a model for the transport of magnetic nanoparticles in an external magnetic field can be integrated with a multiphase tumour model based on the theory of porous media. Our approach based on the underlying physical mechanisms can provide crucial insights into mechanisms that cannot be studied conclusively in experimental research alone. Such a computational model enables an efficient and systematic exploration of the nanoparticle design space, first in a controlled test setup and then in more complex in vivo scenarios. As an effective tool for minimising costly trial-and-error design methods, it expedites translation into clinical practice to improve therapeutic outcomes and limit adverse effects for cancer patients.