Large Fermi surface in pristine kagome metal CsV3Sb5 and enhanced quasiparticle effective masses.

The kagome metal CsV[Formula: see text]Sb[Formula: see text] is an ideal platform to study the interplay between topology and electron correlation. To understand the fermiology of CsV[Formula: see text]Sb[Formula: see text], intensive quantum oscillation (QO) studies at ambient pressure have been conducted. However, due to the Fermi surface reconstruction by the complicated charge density wave (CDW) order, the QO spectrum is exceedingly complex, hindering a complete understanding of the fermiology. Here, we directly map the Fermi surface of the pristine CsV[Formula: see text]Sb[Formula: see text] by measuring Shubnikov-de Haas QOs up to 29 T under pressure, where the CDW order is completely suppressed. The QO spectrum of the pristine CsV[Formula: see text]Sb[Formula: see text] is significantly simpler than the one in the CDW phase, and the detected oscillation frequencies agree well with our density functional theory calculations. In particular, a frequency as large as 8,200 T is detected. Pressure-dependent QO studies further reveal a weak but noticeable enhancement of the quasiparticle effective masses on approaching the critical pressure where the CDW order disappears, hinting at the presence of quantum fluctuations. Our high-pressure QO results reveal the large, unreconstructed Fermi surface of CsV[Formula: see text]Sb[Formula: see text], paving the way to understanding the parent state of this intriguing metal in which the electrons can be organized into different ordered states.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries.

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

Phonon transport in vacancy induced defective stanene/hBN van der Waals heterostructure.

In this study, Non-Equilibrium Molecular Dynamics (NEMD) simulation is employed to investigate the phonon thermal conductivity (PTC) of Sn/hBN van der Waals heterostructures with different vacancy-induced defects. We deliberately introduce three types of vacancies in Sn/hBN bilayer point vacancies, bivacancies, and edge vacancies at various concentrations ranging from 0.25% to 2%, to examine their effects on PTC across temperatures from 100 K to 600 K. The key findings of our work are (i) PTC declines monotonically with increasing vacancy concentration for all types of vacancies, with a maximum reduction of ∼62% observed at room temperature compared to its pristine form. (ii) The position of defects has an impact on PTC, with a larger decrease observed when defects are present in the hBN layer and a smaller decrease when defects are in the Sn layer. (iii) The type of vacancy also influences PTC, with point vacancies causing the most substantial reduction, followed by bivacancies, and edge vacancies having the least effect. A 2% defect concentration results in a ∼62% decrease in PTC for point vacancies, ∼51% for bivacancies, and ∼32% for edge vacancies. (iv) Finally, our results indicate that for a given defect concentration, PTC decreases as temperature increases. The impact of temperature on thermal conductivity is less pronounced compared to the effect of vacancies for the defective Sn/hBN bilayer. The presence of vacancies and elevated temperatures enhance phonon-defect and phonon-phonon scattering, leading to changes in the phonon density of states (PDOS) profile and the distribution of phonons across different frequencies of Sn/hBN bilayer, thus affecting its thermal conductivity. This work offers new insights into the thermal behavior of vacancy-filled Sn/hBN heterostructures, suggesting potential pathways for modulating thermal conductivity in bilayer van der Waals heterostructures for applications in thermoelectric, optoelectronics, and nanoelectronics in future.

Influence of algal-extracellular polymeric substances (EPS) on the pristine and combined toxicity of TiO2 NPs and PSNPs in Artemia salina: Eco-corona enhances the toxic effects.

The study on the influence of Natural Organic Matter (NOM) over the individual and combined effects of different nanomaterials on marine species is pertinent. The current study explores the role of Extracellular Polymeric Substances (EPS) in influencing the individual and combined toxic effects of polystyrene nanoplastics (PSNPs) viz. aminated (NH2-PSNPs), carboxylated (COOH-PSNPs), and plain PSNPs and TiO2 NPs in the marine crustacean, Artemia salina. A. salina was interacted with pristine PSNPs, pristine TiO2 NPs, EPS incubated PSNPs, EPS incubated TiO2 NPs, binary mixture of PSNPs and TiO2 NPs, and EPS adsorbed binary mixture of PSNPs and TiO2 NPs for 48 h. The present study proves that, when compared to the pristine toxicity of PSNPs and TiO2 NPs, the coexposure of TiO2 NPs with PSNPs resulted in increased toxicity. The adsorption of algal EPS on the NMs (both in their pristine and combined forms) significantly increased the toxic nature of the NMs against A. salina. It was observed that with an increase in the hydrodynamic diameter of the particles, the mortality, oxidative stress, and ingestion of the NMs by A. salina increased. The uptake of Ti by A. salina from 8 mg/L TiO2 NPs, EPS adsorbed 8 mg/L TiO2 NPs, 8 mg/L TiO2 NPs + NH2-PSNPs and the EPS adsorbed mixture of 8 mg/L TiO2 NPs, 8 mg/L TiO2 NPs + NH2-PSNPs was observed to be 0.043, 0.047, 0.186, and 0.307 mg/g of A. salina. The adsorption of algal EPS on the NMs (both in their pristine and combined forms) significantly increased the toxic nature of the NMs against A. salina. The major outcomes from the current study highlight the role of EPS in exacerbating the toxicity of NMs in marine crustaceans.

Metagenomic profiling of antibiotic resistance genes in Red Sea brine pools.

Antibiotic resistance (AR) is an alarming global health concern, causing an annual death rate of more than 35,000 deaths in the US. AR is a natural phenomenon, reported in several pristine environments. In this study, we report AR in pristine Red Sea deep brine pools. Antimicrobial resistance genes (ARGs) were detected for several drug classes with tetracycline and macrolide resistance being the most abundant. As expected, ARGs abundance increased in accordance with the level of human impact with pristine Red Sea samples having the lowest mean ARG level followed by estuary samples, while activated sludge samples showed a significantly higher ARG level. ARG hierarchical clustering grouped drug classes for which resistance was detected in Atlantis II Deep brine pool independent of the rest of the samples. ARG abundance was significantly lower in the Discovery Deep brine pool. A correlation between integrons and ARGs abundance in brine pristine samples could be detected, while insertion sequences and plasmids showed a correlation with ARGs abundance in human-impacted samples not seen in brine pristine samples. This suggests different roles of distinct mobile genetic elements (MGEs) in ARG distribution in pristine versus human-impacted sites. Additionally, we showed the presence of mobile antibiotic resistance genes in the Atlantis II brine pool as evidenced by the co-existence of integrases and plasmid replication proteins on the same contigs harboring predicted multidrug-resistant efflux pumps. This study addresses the role of non-pathogenic environmental bacteria as a silent reservoir for ARGs, and the possible horizontal gene transfer mechanism mediating ARG acquisition.

Microplastics - Back to Reality: Impact of Pristine and Aged Microplastics in Soil on Earthworm Eisenia fetida under Environmentally Relevant Conditions.

Recently, studies have highlighted the potential danger for soil organisms posed by film-derived microplastics (MPs). However, the majority of those does not accurately reflect the field conditions and the degree of MP contamination that can be found in actual settings. To fill the gap between laboratory and field scenarios, the polyethylene (PE) plastic film was made into PE-MPs and aged. Toxicity and molecular mechanisms of pristine PE-MPs (PMPs) and aged PE-MPs (AMPs) with the concentration at 500 mg/kg of dry weight were determined after 14 days of exposure by measuring the oxidative stress, osmoregulation pressure, gut microbiota, and metabolic responses in earthworms under environmentally relevant conditions. Our research showed that, when compared to PMPs (13.13 ± 1.99 items/g), AMPs accumulated more (16.19 ± 8.47 items/g), caused more severe tissue lesions, and caused a higher increase of cell membrane osmotic pressure in earthworms' intestines. Furthermore, the proportion of probiotic bacteria Lactobacillus johnsonii in the gut bacterial communities was 24.26%, 23.26%, and 12.96%, while the proportion of pathogenic bacteria of the phylum Verrucomicrobia was 2.28%, 4.79%, and 10.39% in the control and PMP- and AMP-exposed earthworms, indicating that the decrease in number of probiotic bacteria and the increase in number of pathogenic bacteria were more pronounced in the gut of AMP- rather than PMP-exposed earthworms. Metabolomic analysis showed that AMP exposure reduced earthworm energy metabolites. Consequently, the constant need for energy may result in protein catabolism, which raises levels of some amino acids, disturbs normal cell homeostasis, causes changes of cell membrane osmolarity, and destroys the cell structure. Our studies showed that aged MPs, with the same characteristics as those found in the environment, have greater toxicity than pristine MPs. The results of this study broaden our understanding of the toxicological effects of MPs on soil organisms under environmentally relevant conditions.

Response of methylmercury in paddy soil and paddy rice to pristine biochar: A meta-analysis and environmental implications.

Biochar has received increased research attention due to its effectiveness in mitigating the potential risks of mercury (Hg) in agricultural soils. However, there is a lack of consensus on the effect of pristine biochar on the net production, availability, and accumulation of methylmercury (MeHg) in the paddy rice-soil system. As such, a meta-analysis with 189 observations was performed to quantitatively assess the effects of biochar on Hg methylation, MeHg availability in paddy soil, and the accumulation of MeHg in paddy rice. Results suggested that biochar application could significantly increase the production of MeHg in paddy soil by 19.01%; biochar could also decrease the dissolved and available MeHg in paddy soil by 88.64% and 75.69%, respectively. More importantly, biochar application significantly inhibited the MeHg accumulation in paddy rice by 61.10%. These results highlight that biochar could decrease the availability of MeHg in paddy soil and thus inhibit MeHg accumulation in paddy rice, although it might facilitate the net production of MeHg in paddy soil. Additionally, results also indicated that the biochar feedstock and its elementary composition significantly impacted the net MeHg production in paddy soil. Generally, biochar with a low carbon content, high sulfur content, and low application rate might be beneficial for inhibiting Hg methylation in paddy soil, meaning that Hg methylation depends on biochar feedstock. These findings suggested that biochar has great potential to inhibit MeHg accumulation in paddy rice, and further research should focus on selecting biochar feedstock to control Hg methylation potential and determine its long-term effects.

High-sensitivity NH3 gas sensor using pristine graphene doped with CuO nanoparticles.

A highly sensitive and selective NH3 gas sensor was developed based on single-layer pristine graphene doped with copper(II) oxide (CuO) nanoparticles of a specific size. High-quality single-layer graphene was grown using chemical vapor deposition. Approximately 15 nm-sized CuO colloidal nanoparticles were fabricated by a microwave-assisted thermal method using copper acetate as the precursor, and dimethylformamide as the reducing and stabilizing agent. Pristine graphene was doped with an aqueous suspension of CuO nanoparticles at a coating speed of 1500 rpm using a simple spin coater. CuO nanoparticle doping induces changes in the electronic properties of graphene; in particular, p-type doping significantly altered graphene resistivity in the presence of NH3 gas. Upon exposure of the pristine graphene surface to NH3 gas, NH3 reacted with O2-/ O-/ O2- species on the graphene surface and released electrons into graphene. This caused a change in the concentration of charge carriers in the valence channel of graphene and an increase in graphene resistivity, facilitating real-time NH3 monitoring with quick response and rapid recovery at 25 ℃ and ~ 55% relative humidity. Our results indicated that graphene doped with ~ 15 nm-sized CuO nanoparticles can sense NH3 gas selectively with a resistivity response of ~ 83%. Moreover, the sensor exhibited good reusability, fast response (~ 19 s), and rapid recovery (~ 277 s) with a detection limit of 0.041 ppm and a relative standard deviation of 0.76%.

Mobility of LoRaWAN Gateways for Efficient Environmental Monitoring in Pristine Sites.

Environmental monitoring of delicate ecosystems or pristine sites is critical to their preservation. The communication infrastructure for such monitoring should have as little impact on the natural ecosystem as possible. Because of their wide range capabilities and independence from heavy infrastructure, low-power wide area network protocols have recently been used in remote monitoring. In this regard, we propose a mobile vehicle-mounted gateway architecture for IoT data collection in communication-network-free areas. The limits of reliable communication are investigated in terms of gateway speed, throughput, and energy consumption. We investigate the performance of various gateway arrival scenarios, focusing on the trade-off between freshness of data, data collection rate, and end-node power consumption. Then we validate our findings using both real-world experiments and simulations. In addition, we present a case study exploiting the proposed architecture to provide coverage for Wadi El-Gemal national park in Egypt. The results show that reliable communication is achieved over all spreading factors (SFs) for gateway speeds up to 150 km/h with negligible performance degradation at SFs=11,12 at speeds more than 100 km/h. The synchronized transmission model ensures the best performance in terms of throughput and power consumption at the expense of the freshness of data. Nonsynchronized transmission allows time-flexible data collection at the expense of increased power consumption. The same throughput as semisynchronized transmission is achieved using four gateways at only five times the energy consumption, while a single gateway requires seventeen times the amount of energy. Furthermore, increasing the number of gateways to ten increases the throughput to the level achieved by the synchronized scenario while consuming eight times the energy.

Recent developments in metallic-nanoparticles-loaded biochars synthesis and use for phosphorus recovery from aqueous solutions. A critical review.

Phosphorus (P) represents a major pollutant of water resources and at the same time a vital element for human and plants. P recovery from wastewaters and its reuse is a necessity in order to compensate the current important depletion of P natural reserves. The use of biochars for P recovery from wastewaters and their subsequent valorization in agriculture, instead of synthetic industrial fertilizers, promotes circular economy and sustainability concepts. However, P retention by pristine biochars is usually low and a modification step is always required to improve their P recovery efficiency. The pre- or post-treatment of biochars with metal salts seems to be one of the most efficient approaches. This review aims to summarize and discuss the most recent developments (from 2020- up to now) in: i) the role of the feedstock nature, the metal salt type, the pyrolysis conditions, and the experimental adsorption parameters on metallic-nanoparticles-loaded biochars properties and effectiveness in recovering P from aqueous solutions, as well as the dominant involved mechanisms, ii) the effect of the eluent solutions nature on the regeneration ability of P-loaded biochars, and iii) the practical challenges facing the upscaling of P-loaded biochars production and valorization in agriculture. This review shows that the synthesized biochars through slow pyrolysis at relatively high temperatures (up to 700-800 °C) of mixed biomasses with Ca- Mg-rich materials or impregnated biomasses with specific metals in order to from layered double hydroxides (LDHs) biochars composites exhibit interesting structural, textural and surface chemistry properties allowing high P recovery efficiency. Depending on the pyrolysis's and adsorption's experimental conditions, these modified biochars may recover P through combined mechanisms including mainly electrostatic attraction, ligand exchange, surface complexation, hydrogen bonding, and precipitation. Moreover, the P-loaded biochars can be used directly in agriculture or efficiently regenerated with alkaline solutions. Finally, this review emphasizes the challenges concerning the production and use of P-loaded biochars in a context of circular economy. They concern the optimization of P recovery process from wastewater in real-time scenarios, the reduction of energy-related biochars production costs and the intensification of communication/dissemination campaigns to all the concerned actors (i.e., farmers, consumers, stakeholders, and policymakers) on the benefits of P-loaded biochars reuse. We believe that this review is beneficial for new breakthroughs on the synthesis and green application of metallic-nanoparticles-loaded biochars.

Synthesis and characterization of pristine and strontium-doped zinc oxide nanoparticles for methyl green photo-degradation application.

Herein we describe an effective route for the degradation of methyl green (MG) dye under visible light illumination by pristine and strontium (Sr)-doped zinc oxide (ZnO) photocatalysts (synthesized by the simple chemical precipitation method). The x-ray diffraction structural analysis has confirmed that both photocatalysts exhibit the hexagonal wurtzite structure; without any additional phase formation in Sr-doped ZnO, in particular. The optical properties of the synthesized photocatalysts have been investigated using UV-vis absorption spectroscopy in the wavelength range of 250-800 nm. Through Tauc's plot, the slight decrease from 3.3 to 3.2 eV in band gap energy has been elucidated (in the case of Sr-doped ZnO), which has been further confirmed by the quenching in the intensity of Photoluminescence (PL) emission spectrum. This may be due to sub-band level formation between valence and conduction band, caused by the impregnation of Sr2+ions into ZnO host. The morphological study has also been performed using Field Emission Scanning Electron Microscope, which indicates nanoparticles (NPs) based surface texture for both photocatalysts. During the photocatalytic activity study, after 30 min irradiation of visible light, ∼65.7% and ∼84.8% photocatalytic degradation of MG dye has been achieved for pristine and Sr-doped (2 wt%) ZnO photocatalysts, respectively. The rate of photocatalytic reaction (K) has been observed to be âˆ¼0.06399 min-1for Sr-doped (2 wt%), whereas nearly half magnitude âˆ¼0.03403 min-1has been observed for pristine ZnO, respectively. The significantly improved photodegradation activity may be ascribed to the relatively broader optical absorption capability, surface defects and the enhanced charge separation efficiency of the Sr-doped ZnO photocatalyst.

Assessment of Pristine Carbon Nanotubes Toxicity in Rodent Models.

Carbon nanotubes are increasingly used in nanomedicine and material chemistry research, mostly because of their small size over a large surface area. Due to their properties, they are very attractive candidates for use in medicine and as drug carriers, contrast agents, biological platforms, and so forth. Carbon nanotubes (CNTs) may affect many organs, directly or indirectly, so there is a need for toxic effects evaluation. The main mechanisms of toxicity include oxidative stress, inflammation, the ability to damage DNA and cell membrane, as well as necrosis and apoptosis. The research concerning CNTs focuses on different animal models, functionalization, ways of administration, concentrations, times of exposure, and a variety of properties, which have a significant effect on toxicity. The impact of pristine CNTs on toxicity in rodent models is being increasingly studied. However, it is immensely difficult to compare obtained results since there are no standardized tests. This review summarizes the toxicity issues of pristine CNTs in rodent models, as they are often the preferred model for human disease studies, in different organ systems, while considering the various factors that affect them. Regardless, the results showed that the majority of toxicological studies using rodent models revealed some toxic effects. Even with different properties, carbon nanotubes were able to generate inflammation, fibrosis, or biochemical changes in different organs. The problem is that there are only a small amount of long-term toxicity studies, which makes it impossible to obtain a good understanding of later effects. This article will give a greater overview of the situation on toxicity in many organs. It will allow researchers to look at the toxicity of carbon nanotubes in a broader context and help to identify studies that are missing to properly assess toxicity.

Therapeutic effect of curcumin and C60 fullerene against hyperglycemia-mediated tissue damage in diabetic rat lungs.

Increasing evidence suggests that diabetes also targets lung tissues resulting in structural and physiological abnormalities. The present study evaluated the impact of pristine C60 fullerene (C60) against diabetes-induced lung damage for the first time. The objective was to evaluate the impacts of Curcumin (Cur), C60 and C60 fullerene+Curcumin (C60 + Cur) combination on oxidative stress (MDA, GSH, CAT, GST, Retinol, α-tocopherol), apoptosis (Caspase-3, Bcl-2), cholesterol and fatty acid profile (16:0,18:0,18:1,18:2, 22:4, 22:6) against changes in the lung tissue of diabetic rats. Streptozotocin (STZ) was used for inducing diabetes with Cur, C60 and C60 + Cur combination administered for eight weeks to treat diabetic and control rats. Increased oxidative stress, apoptosis and significant changes in cell structure were observed in the lung tissues of diabetic rats. The combination of Cur, C60 and C60 + Cur reduced oxidative stress in the lung tissue of diabetic rats while increasing the antioxidant defense capacity of the tissue, exhibiting tissue protective properties against apoptosis. The diabetic rats displayed favorable properties against lipotoxicity-induced tissue damage due to the increase in the fatty acid and cholesterol levels in lung tissue. It was observed that Cur, C60 and C60 + Cur combination displays protective effects against hyperglycemia induced oxidative damage to lung tissue. Oxidative stress, prevention of lipid and cholesterol accumulation, and weakening of lung apoptosis may be associated with these effects.

Anticoronavirus Activity of Water-Soluble Pristine C60 Fullerenes: In Vitro and In Silico Screenings.

INTRODUCTION: The emergence of a new member of the Coronaviridae family, which caused the 2020 pandemic, requires detailed research on the evolution of coronaviruses, their structure and properties, and interaction with cells. Modern nanobiotechnologies can address the many clinical challenges posed by the COVID-19 pandemic. In particular, they offer new therapeutic approaches using biocompatible nanostructures with "specific" antiviral activity. Therefore, the nanosized spherical-like molecule (0.72 nm in diameter) composed of 60 carbon atoms, C60 fullerene, is of interest in terms of fighting coronaviruses due to its high biological activity. In here, we aim to evaluate the effectiveness of anticoronavirus action of water-soluble pristine C60 fullerene in the model and in vitro systems. As a model, apathogenic for human coronavirus, we used transmissible gastroenteritis virus of swine (TGEV), which we adapted to the BHK-21 cell culture (kidney cells of a newborn Syrian hamster). METHODS: The shape and size of the particles present in C60 fullerene aqueous colloidal solution (C60FAS) of given concentration, as well as C60FAS stability (value of zeta potential) were studied using microscopic (STM, scanning tunneling microscopy, and AFM, atomic force microscopy) and spectroscopic (DLS, dynamic light scattering) methods. The cytopathic effect of TGEV was determined with the help of a Leica DM 750 microscope and the degree of monolayer changes in cells was assessed. The microscopy of the viral suspension was performed using a high resolution transmission electron microscope (HRTEM; JEM-1230, Japan). Finally, the search for and design of optimal possible complexes between C60 fullerene and target proteins in the structure of SARS-CoV-2 coronavirus, evaluation of their stability in the simulated cellular environment were performed using molecular dynamics and docking methods. RESULTS: It was found that the maximum allowable cytotoxic concentration of C60 fullerene is 37.5 ± 3.0 µg/ml. The investigated C60FAS reduces the titer of coronavirus infectious activity by the value of 2.00 ± 0.08 TCID50/ml. It was shown that C60 fullerene interacts directly with SARS-CoV-2 proteins, such as RdRp (RNA-dependent RNA polymerase) and 3CLpro (3-chymotrypsin-like protease), which is critical for the life cycle of the coronavirus and, thus, inhibits its functional activity. In both cases, C60 fullerene fills the binding pocket and gets stuck there through stacking and steric interactions. CONCLUSION: Pioneer in vitro study to identify the anticoronavirus activity of water-soluble pristine C60 fullerenes indicates that they are highly promising for further preclinical studies, since a significant inhibition of the infectious activity of swine coronavirus of transmissible gastroenteritis in BHK-21 cell culture was found. According to molecular modeling results, it was shown that C60 fullerene can create the stable complexes with 3CLpro and RdRp proteins of SARS-CoV-2 coronavirus and, thus, suppress its functional activity.

Field cross-fostering and in vitro rearing demonstrate negative effects of both larval and adult exposure to a widely used fungicide in honey bees (Apis mellifera).

Pollinators and other insects are experiencing an ongoing worldwide decline. While various environmental stressors have been implicated, including pesticide exposure, the causes of these declines are complex and highly debated. Fungicides may constitute a particularly prevalent threat to pollinator health due to their application on many crops during bloom, and because pollinators such as bees may consume fungicide-tainted pollen or nectar. In a previous study, consumption of pollen containing the fungicide Pristine® at field-relevant concentrations by honey bee colonies increased pollen foraging, caused earlier foraging, lowered worker survival, and reduced colony population size. Because most pollen is consumed by young adults, we hypothesized that Pristine® (25.2% boscalid, 12.8% pyraclostrobin) in pollen exerts its negative effects on honey bee colonies primarily on the adult stage. To rigorously test this hypothesis, we used a cross-fostering experimental design, with bees reared in colonies provided Pristine® incorporated into pollen patties at a supra-field concentration (230 mg/kg), only in the larvae, only in the adult, or both stages. In contrast to our predictions, exposure to Pristine® in either the larval or adult stage reduced survival relative to control bees not exposed to Pristine®, and exposure to the fungicide at both larval and adult stages further reduced survival. Adult exposure caused precocious foraging, while larval exposure increased the tendency to forage for pollen. These results demonstrate that pollen containing Pristine® can induce significant negative effects on both larvae and adults in a hive, though the magnitude of such effects may be smaller at field-realistic doses. To further test the potential negative effects of direct consumption of Pristine® on larvae, we reared them in vitro on food containing Pristine® at a range of concentrations. Consumption of Pristine® reduced survival rates of larvae at all concentrations tested. Larval and adult weights were only reduced at a supra-field concentration. We conclude that consumption of pollen containing Pristine® by field honey bee colonies likely exerts impacts on colony population size and foraging behavior by affecting both larvae and adults.

A comparative study on the adsorption behavior of pesticides by pristine and aged microplastics from agricultural polyethylene soil films.

Compared with pristine agricultural polyethylene (PE) soil films microplastics (MPs), aged agricultural polyethylene (APE) soil films MPs have a rougher surface, more cracks and have some oxygen-containing functional groups that makes them adsorb organic pollutants, such as pesticides more easily. This may be more harmful to human beings than marine MPs as the agricultural soil films are closer to our living environment. But few works focused on the adsorption of pesticides on pristine or aged agricultural polyethylene soil films MPs. In order to promote the risk assessment of co-exposure of pesticides and agricultural polyethylene soil films MPs, a comparative study on the adsorption behavior and mechanism of four pesticides (carbendazim, diflubenzuron, malathion, difenoconazole) by pristine PE MPs and APE MPs were carried out in this paper. The results showed microcracks and surface oxidation observed on APE MPs. The adsorption kinetics and isotherm models indicated that the adsorption capacity of APE MPs was higher than that of PE MPs, which attribute to the larger surface area of APE MPs. The adsorption capacities of pesticides on APE MPs were positively correlated with LogKow (Water octanol partition coefficient) values of these four pesticides, showed the hydrophobic partitioning played the most important part in the adsorption, but also some H-bonding between secondary amines in the molecular of diflubenzuron and polar O-containing functional groups on APE MPs may be formed. And electrostatic forces or interactions are not the determining factor for these pesticides adsorption behavior of PE MPs, and the effect of pH is mainly driven by changes in sorbate properties rather than changes in surface properties of MPs. The results presented herein show the APE MPs can be a better vector of most hydrophobic pesticides than pristine MPs in the agricultural field, and more attention should be paid to the problem of films and pesticides residue in farmland soil.

Recent Developments in Graphene-Based Toxic Gas Sensors: A Theoretical Overview.

Detecting and monitoring air-polluting gases such as carbon monoxide (CO), nitrogen oxides (NOx), and sulfur oxides (SOx) are critical, as these gases are toxic and harm the ecosystem and the human health. Therefore, it is necessary to design high-performance gas sensors for toxic gas detection. In this sense, graphene-based materials are promising for use as toxic gas sensors. In addition to experimental investigations, first-principle methods have enabled graphene-based sensor design to progress by leaps and bounds. This review presents a detailed analysis of graphene-based toxic gas sensors by using first-principle methods. The modifications made to graphene, such as decorated, defective, and doped to improve the detection of NOx, SOx, and CO toxic gases are revised and analyzed. In general, graphene decorated with transition metals, defective graphene, and doped graphene have a higher sensibility toward the toxic gases than pristine graphene. This review shows the relevance of using first-principle studies for the design of novel and efficient toxic gas sensors. The theoretical results obtained to date can greatly help experimental groups to design novel and efficient graphene-based toxic gas sensors.

Effects of Aqueous Dispersions of C60, C70 and Gd@C82 Fullerenes on Genes Involved in Oxidative Stress and Anti-Inflammatory Pathways.

BACKGROUND: Fullerenes and metallofullerenes can be considered promising nanopharmaceuticals themselves and as a basis for chemical modification. As reactive oxygen species homeostasis plays a vital role in cells, the study of their effect on genes involved in oxidative stress and anti-inflammatory responses are of particular importance. METHODS: Human fetal lung fibroblasts were incubated with aqueous dispersions of C60, C70, and Gd@C82 in concentrations of 5 nM and 1.5 µM for 1, 3, 24, and 72 h. Cell viability, intracellular ROS, NOX4, NFκB, PRAR-γ, NRF2, heme oxygenase 1, and NAD(P)H quinone dehydrogenase 1 expression have been studied. RESULTS & CONCLUSION: The aqueous dispersions of C60, C70, and Gd@C82 fullerenes are active participants in reactive oxygen species (ROS) homeostasis. Low and high concentrations of aqueous fullerene dispersions (AFD) have similar effects. C70 was the most inert substance, C60 was the most active substance. All AFDs have both "prooxidant" and "antioxidant" effects but with a different balance. Gd@C82 was a substance with more pronounced antioxidant and anti-inflammatory properties, while C70 had more pronounced "prooxidant" properties.

Mechanochromic and Thermochromic Sensors Based on Graphene Infused Polymer Opals.

High quality opal-like photonic crystals containing graphene are fabricated using evaporation-driven self-assembly of soft polymer colloids. A miniscule amount of pristine graphene within a colloidal crystal lattice results in the formation of colloidal crystals with a strong angle-dependent structural color and a stop band that can be reversibly shifted across the visible spectrum. The crystals can be mechanically deformed or can reversibly change color as a function of their temperature, hence their sensitive mechanochromic and thermochromic response make them attractive candidates for a wide range of visual sensing applications. In particular, it is shown that the crystals are excellent candidates for visual strain sensors or integrated time-temperature indicators which act over large temperature windows. Given the versatility of these crystals, this method represents a simple, inexpensive, and scalable approach to produce multifunctional graphene infused synthetic opals and opens up exciting applications for novel solution-processable nanomaterial based photonics.

Occurrence and Extent of Boscalid Resistance in Populations of Alternaria alternata from California Pistachio Orchards.

Alternaria late blight (ALB) caused by Alternaria spp. is an annual disease problem in California pistachio and requires repeated applications of fungicides to prevent significant losses of pistachio foliage and nut quality. From 2003 onward, the succinate dehydrogenase inhibiting fungicide boscalid has played a key role in ALB management. The development of boscalid resistance in A. alternata populations was monitored from 2005 to 2012 in pistachio producing areas in California. A total of 1,765 single-spore isolates, collected from commercial and experimental pistachio orchards with or without a history of boscalid exposure, were tested in a radial growth assay in agar media amended with the discriminatory dose of 10 µg/ml of boscalid. The frequency of boscalid-resistant isolates in 2005 was 12% but increased significantly and remained stable toward the end of the survey period. Most of the resistant isolates exhibited a high level of resistance (R) to boscalid with percent of mycelial growth inhibition (PGI) values between 0 and 50%, whereas significantly fewer isolates had an intermediate level (IR) of resistance (50 < PGI < 75%). The frequency of sensitive (S) isolates (75 < PGI < 100%) was generally the highest in orchards with no history of boscalid usage, whereas mean incidences of boscalid-resistant populations of Alternaria were 81, 92.4, 80.2, and 98%, in 2006, 2007, 2011, and 2012, respectively, in orchards that received a high number (at least three per season) of boscalid spray applications. In comparison, none to relatively low frequencies (0 to 12%) of resistance were observed in populations with no or limited exposure to Pristine, suggesting an air-movement of resistant spores through wind from treated to nontreated areas. In 2012, boscalid-resistant isolates were found practically in every sampled location in all counties, with the orchards in Fresno, Madera, Tulare, and King Counties being the locations with the highest frequencies of resistance (100%). Monitoring of A. alternata AaSDHB, AaSDHC, and AaSDHD mutations in 286 boscalid-resistant phenotypes identified 11 mutations, leading to amino acid substitutions in AaSDHB (seven mutations: H277Y/R/L, P230A/R, N235D/T), AaSDHC (one mutation: H134R), and AaSDHD (three mutations: D123E, H133R/P), with AaSDHB mutations being the most prevalent (80%) ones throughout the survey period. The majority of isolates carrying these mutations exhibited the R phenotype toward boscalid. The increased prevalence of boscalid resistance in populations of A. alternata is a likely contributing factor to the inability of pistachio farmers to successfully control ALB with Pristine. Other factors implicated in the rapid and widespread occurrence of A. alternata boscalid-resistant populations in California pistachios are further discussed.