AB- Versus AA+BB-Suzuki Polycondensation: A Palladium/Tris(tert-butyl)phosphine Catalyst Can Outperform Conventional Catalysts.

A Pd/Pt-Bu3 catalyst having bulky, electron-rich ligands significantly outperforms conventional "step-growth catalysts" Pd(PPh3 )4 and Pd(Po-Tol3 )3 in the Suzuki polycondensation of the AB-type arylene-based monomers, such as some of the substituted fluorenes, carbazoles, and phenylenes. In the AA+BB polycondensation, Pd/Pt-Bu3 also performs better under homogeneous reaction conditions, in combination with the organic base Et4 NOH. The superior performance of Pd/Pt-Bu3 is discussed in terms of its higher reactivity in the oxidative addition step and inherent advantages of the intramolecular catalyst transfer, which is a key step joining catalytic cycles of the AB-polycondensation. These findings are applied to the synthesis of a carbazole-based copolymer designed for the use as a hole conductor in solution-processed organic light-emitting diodes.

A Simply Synthesized, Tough Polyarylene with Transient Mechanochromic Response.

A simple and high-yielding route to tough polyarylenes of the type poly(meta,meta,para-phenylene) (PmmpP) is developed. PmmpP is tough even in its as-synthesized state which has an intermediate molar mass of Mw ≈60 kg mol-1 and exhibits outstanding mechanical properties at further optimized molecular weight of Mw =96 kg mol-1 , E=0.9 GPa, ϵ=300 %. Statistical copolymers with para,para-spiropyran (SP) are mechanochromic, and the toughness allows mechanochromism to be investigated. Strained samples instantaneously lose color upon force release. DFT calculations show this phenomenon to be caused by the PmmpP matrix that allows build-up of sufficiently large forces to be transduced to SP, and the relatively unstable corresponding merocyanine (MC) form arising from the aromatic co-monomer. MC units covalently incorporated into PmmpP show a drastically reduced half life time of 3.1 s compared to 4.5 h obtained for SP derivatives with common 6-nitro substitution.

A Green Route to Conjugated Polyelectrolyte Interlayers for High-Performance Solar Cells.

Synthesis of fluorene-based conjugated polyelectrolytes was achieved via Suzuki polycondensation in water and completely open to air. The polyelectrolytes were conveniently purified by dialysis and analysis of the materials showed properties expected for fluorene-based conjugated polyelectrolytes. The materials were then employed in solar cell devices as an interlayer in conjunction with ZnO. The double interlayer led to enhanced power conversion efficiency of 10.75 % and 15.1 % for polymer and perovskite solar cells, respectively.

Alternating Intramolecular and Intermolecular Catalyst-Transfer Suzuki-Miyaura Condensation Polymerization: Synthesis of Boronate-Terminated π-Conjugated Polymers Using Excess Dibromo Monomers.

The Suzuki-Miyaura coupling polymerization of dibromoarene 1 and arylenediboronic acid (ester) 2 with a Pd catalyst having a high propensity for intramolecular catalyst transfer is reported. The polymerization of excess 1 with 2 affords high-molecular-weight π-conjugated polymer having boronic acid (ester) moieties at both ends, contrary to Flory's principle. This unstoichiometric polycondensation behavior is accounted for by intramolecular transfer of the Pd catalyst on 1. In the polymerization of 1 and 2 having different aryl residues, high-molecular-weight polymer is obtained when the stronger donor aromatic is used as the dibromo monomer and the weaker donor or acceptor aromatic is used as diboronic acid (ester) monomer. The pinacol boronate moieties at both ends of the obtained poly(p-phenylene) (PPP) can be converted to benzoic acid ester, hydroxyl group, and bromine. Furthermore, the reaction of the pinacol boronate-terminated PPP with poly(3-hexylthiophene) (P3HT) having bromine at one end yields a triblock copolymer of P3HT-b-PPP-b-P3HT.

Influence of the boron moiety and water on suzuki-miyaura catalyst-transfer condensation polymerization.

Although water promotes Suzuki-Miyaura coupling reaction, it also induces side reactions such as deboronation and dehalogenation. Therefore, Suzuki-Miyaura polymerization of triolborate halothiophene monomer 1 with (t) Bu3 PPd(o-tolyl)Br (2) in dry tetrahydrofuran (THF) is investigated. However, the resultant poly(3-hexylthiophene) (P3HT) shows a broad molecular weight distribution and uncontrolled polymer ends. Model reactions of a number of boron reagents 3 with 2,5-dibromothiophene (4) in the presence or absence of water indicate that intramolecular transfer of the catalyst is hardly affected by the boron moiety of 3, whereas it is hindered in the absence of water. Indeed, polymerization of 1 with 2 in H2 O/THF affords P3HT with a narrower molecular weight distribution and controlled tolyl/H ends, as compared to the reaction in dry THF.

Simple synthesis of P(Cbz-alt-TBT) and PCDTBT by combining direct arylation with suzuki polycondensation of heteroaryl chlorides.

Direct arylation (DA) of 2-chlorothiophene and 2-chloro-3-hexylthiophene with 4,7-dibromo-2,1,3-benzothiadiazole is used to synthesize 4,7-bis(5-chloro-2-thienyl)-2,1,3-benzothiadiazole (TBTCl2) and 4,7-bis(5-chloro-4-hexyl-2-thienyl)-2,1,3-benzothiadiazole (DH-TBTCl2) in one step. Suitable conditions of the Suzuki polycondensations (SPC) of TBTCl2 and DH-TBTCl2 with the carbazole comonomer CbzPBE2 are established, furnishing PCDTBT and P(Cbz-alt-TBT) with high molecular weight and yield. Compared with control samples made from the corresponding dibromides, high-temperature NMR and UV-vis spectroscopy indicate similar properties for PCDTBT but an increased content of Cbz-Cbz homocouplings for P(Cbz-alt-TBT).

Design of Novel Functional Conductive Structures and Preparation of High-Hole-Mobility Polymer Transistors by Green Synthesis Using Acceptor-Donor-Acceptor Strategies.

The design of novel acceptor molecular structures based on classical building blocks is regarded as one of the efficient ways to explore the application of organic conjugated materials in conductivity and electronics. Here, a novel acceptor moiety, thiophene-vinyl-diketopyrrolopyrrole (TVDPP), was envisioned and prepared with a longer conjugation length and a more rigid structure than thiophene-diketopyrrolopyrrole (TDPP). The brominated TVDPP can be sequentially bonded to trimethyltin-containing benzo[c][1,2,5]thiadiazole units via Suzuki polycondensation to efficiently prepare the polymer PTVDPP-BSz, which features high molecular weight and excellent thermal stability. The polymerization process takes only 24 h and eliminates the need for chlorinated organic solvents or toxic tin-based reagents. Density functional theory (DFT) simulations and film morphology analyses verify the planarity and high crystallinity of the material, respectively, which facilitates the achievement of high carrier mobility. Conductivity measurements of the polymeric material in the organic transistor device show a hole mobility of 0.34 cm2 V-1 s-1, which illustrates its potential for functionalized semiconductor applications.

Use of N-methyliminodiacetic acid boronate esters in suzuki-miyaura cross-coupling polymerizations of triarylamine and fluorene monomers.

Polytriarylamine copolymers can be prepared by Suzuki-Miyaura cross-coupling reactions of bis N-methyliminodiacetic acid (MIDA) boronate ester substituted arylamines with dibromo arenes. The roles of solvent composition, temperature, reaction time, and co-monomer structure were examined and (co)polymers prepared containing 9, 9-dioctylfluorene (F8), 4-sec-butyl or 4-octylphenyl diphenyl amine (TFB), and N, N'-bis(4-octylphenyl)-N, N'-diphenyl phenylenediamine (PTB) units, using a Pd(OAc)2/2-dicyclohexylphosphino-2',6'-dimethoxybiphenyl (SPhos) catalyst system. The performance of a di-functionalized MIDA boronate ester monomer was compared with that of an equivalent pinacol boronate ester. Higher molar mass polymers were produced from reactions starting with a difunctionalized pinacol boronate ester monomer than the equivalent difunctionalized MIDA boronate ester monomer in biphase solvent mixtures (toluene/dioxane/water). Matrix-assisted laser desorption/ionization mass spectroscopic analysis revealed that polymeric structures rich in residues associated with the starting MIDA monomer were present, suggesting that homo-coupling of the boronate ester must be occurring to the detriment of cross-coupling in the step-growth polymerization. However, when comparable reactions of the two boronate monomers with a dibromo fluorene monomer were completed in a single phase solvent mixture (dioxane + water), high molar mass polymers with relatively narrow distribution ranges were obtained after only 4 h of reaction. © 2017 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 2798-2806.