ZASP: A Highly Compatible and Sensitive ZnCl2 Precipitation-Assisted Sample Preparation Method for Proteomic Analysis.

Universal sample preparation for proteomic analysis that enables unbiased protein manipulation, flexible reagent use, and low protein loss is required to ensure the highest sensitivity of downstream liquid chromatography-mass spectrometry (LC-MS) analysis. To address these needs, we developed a ZnCl2 precipitation-assisted sample preparation method (ZASP) that depletes harsh detergents and impurities in protein solutions prior to trypsin digestion via 10 min of ZnCl2 and methanol-induced protein precipitation at room temperature (RT). ZASP can remove trypsin digestion and LC-MS incompatible detergents such as SDS, Triton X-100, and urea at high concentrations in solution and unbiasedly recover proteins independent of the amount of protein input. We demonstrated the sensitivity and reproducibility of ZASP in an analysis of samples with 1 µg to 1000 µg of proteins. Compared to commonly used sample preparation methods such as SDC-based in-solution digestion, acetone precipitation, FASP, and SP3, ZASP has proven to be an efficient approach. Here, we present ZASP, a practical, robust, and cost-effective proteomic sample preparation method that can be applied to profile different types of samples.

Engineering Yarrowia lipolytica for sustainable ricinoleic acid production: A pathway to free fatty acid synthesis.

Ricinoleic acid (C18:1-OH, RA) is a valuable hydroxy fatty acid with versatile applications. The current industrial source of RA relies on the hydrolysis of castor bean oil. However, the coexistence of the toxic compound ricin and the unstable supply of this plant have led to an exploration of promising alternatives: generating RA in heterologous plants or microorganisms. In this study, we engineered the oleaginous yeast Yarrowia lipolytica to produce RA in the form of free fatty acids (FFA). First, we overexpressed fungal Δ12 oleate hydroxylase gene (CpFAH12) from Claviceps purpurea while deleting genes related to fatty acid degradation (MEF1 and PEX10) and oleic acid desaturation (FAD2). Since Δ12 oleate hydroxylase converts oleic acid (C18:1) located at the sn-2 position of phosphatidylcholine (PC), we next focused on increasing the PC pool containing oleic acid. This objective was achieved thorough implementing metabolic engineering strategies designed to enhance the biosynthesis of PC and C18 fatty acids. To increase the PC pool, we redirected the flux towards phospholipid biosynthesis by deleting phosphatidic acid phosphatase genes (PAH1 and APP1) and diacylglycerol acyltransferase gene (DGA1), involved in the production of diacylglycerol and triacylglycerol, respectively. Furthermore, the PC biosynthesis via the CDP-DAG pathway was enhanced through the overexpression of CDS1, PSD1, CHO2, and OPI3 genes. Subsequently, to increase the oleic acid content within PC, we overexpressed the heterologous fatty acid elongase gene (MaC16E) involved in the conversion of C16 to C18 fatty acids. As RA production titer escalated, the produced RA was mainly found in the FFA form, leading to cell growth inhibition. The growth inhibition was mitigated by inducing RA secretion via Triton X-100 treatment, a process that simultaneously amplified RA production by redirecting flux towards RA synthesis. The final engineered strain JHYL-R146 produced 2.061 g/L of free RA in a medium treated with 5% Triton X-100, constituting 74% of the total FFAs produced. Generating free RA offers the added benefit of bypassing the hydrolysis stage required when employing castor bean oil as an RA source. This achievement represents the highest level of RA synthesis from glucose reported thus far, underscoring the potential of Y. lipolytica as a host for sustainable RA production.

GPR40 agonist ameliorates neurodegeneration and motor impairment by regulating NLRP3 inflammasome in Parkinson's disease animal models.

Parkinson's disease (PD) is characterized by the progressive degeneration of dopaminergic neurons in the substantia nigra (SN) and accumulation of intracellular α-synuclein (ɑ-syn) aggregates known as Lewy bodies and Lewy neurites. Levels of polyunsaturated fatty acids (PUFAs) have previously been shown to be reduced in the SN of PD patients. G protein-coupled receptor 40 (GPR40) serves as a receptor for PUFAs, playing a role in neurodevelopment and neurogenesis. Additionally, GPR40 has been implicated in several neuropathological conditions, such as apoptosis and inflammation, suggesting its potential as a therapeutic target in PD. In this study, we investigated the neuroprotective effects of the GPR40 agonist, TUG469 in PD models. Our results demonstrated that TUG469 reduces the neurotoxicity induced by 6-OHDA in SH-SY5Y cells. In 6-OHDA-induced PD model mice, TUG469 treatment improved motor impairment, preserved dopaminergic fibers and cell bodies in the striatum (ST) or SN, and attenuated 6-OHDA-induced microgliosis and astrogliosis in the brain. Furthermore, in a PD model involving the injection of mouse ɑ-syn fibrils into the brain (mPFFs-PD model), TUG469 treatment reduced the levels of pSer129 ɑ-syn, and decreased microgliosis and astrogliosis. Our investigation also revealed that TUG469 modulates inflammasome activation, apoptosis, and autophagy in the 6-OHDA-PD model, as evidenced by the results of RNA-seq and western blotting analyses. In summary, our findings highlight the neuroprotective effects of GPR40 agonists on dopaminergic neurons and their potential as therapeutic agents for PD. These results underscore the importance of targeting GPR40 in PD treatment, particularly in mitigating neuroinflammation and preserving neuronal integrity.

Silencing of tropomodulin 1 inhibits acute myeloid leukemia cell proliferation and tumor growth by elevating karyopherin alpha 2-mediated autophagy.

Evidence shows that tropomodulin 1 (TMOD1) is a powerful diagnostic marker in the progression of several cancer types. However, the regulatory mechanism of TMOD1 in tumor progression is still unclear. Here, we showed that TMOD1 was highly expressed in acute myeloid leukemia (AML) specimens, and TMOD1-silencing inhibited cell proliferation by inducing autophagy in AML THP-1 and MOLM-13 cells. Mechanistically, the C-terminal region of TMOD1 directly bound to KPNA2, and TMOD1-overexpression promoted KPNA2 ubiquitylation and reduced KPNA2 levels. In contrast, TMOD1-silencing increased KPNA2 levels and facilitated the nuclear transfer of KPNA2, then subsequently induced autophagy and inhibited cell proliferation by increasing the nucleocytoplasmic transport of p53 and AMPK activation. KPNA2/p53 inhibitors attenuated autophagy induced by silencing TMOD1 in AML cells. Silencing TMOD1 also inhibited tumor growth by elevating KPNA2-mediated autophagy in nude mice bearing MOLM-13 xenografts. Collectively, our data demonstrated that TMOD1 could be a novel therapeutic target for AML treatment.

Development and Optimization of a Bromothymol Blue-Based PLA2 Assay Involving POPC-Based Self-Assemblies.

Phospholipase A2 (PLA2) is a superfamily of phospholipase enzymes that dock at the water/oil interface of phospholipid assemblies, hydrolyzing the ester bond at the sn-2 position. The enzymatic activity of these enzymes differs based on the nature of the substrate, its supramolecular assemblies (micelle, liposomes), and their composition, reflecting the interfacial nature of the PLA2s and requiring assays able to directly quantify this interaction of the enzyme(s) with these supramolecular assemblies. We developed and optimized a simple, universal assay method employing the pH-sensitive indicator dye bromothymol blue (BTB), in which different POPC (3-palmitoyl-2-oleoyl-sn-glycero-1-phosphocholine) self-assemblies (liposomes or mixed micelles with Triton X-100 at different molar ratios) were used to assess the enzymatic activity. We used this assay to perform a comparative analysis of PLA2 kinetics on these supramolecular assemblies and to determine the kinetic parameters of PLA2 isozymes IB and IIA for each supramolecular POPC assembly. This assay is suitable for assessing the inhibition of PLA2s with great accuracy using UV-VIS spectrophotometry, being thus amenable for screening of PLA2 enzymes and their substrates and inhibitors in conditions very similar to physiologic ones.

The Salt-Induced Diffusiophoresis of Nonionic Micelles-Does the Salt-Induced Growth of Micelles Influence Diffusiophoresis?

Salt-induced diffusiophoresis is the migration of a colloidal particle in water due to a directional salt concentration gradient. An important example of colloidal particles is represented by micelles, generated by surfactant self-assembly in water. For non-ionic surfactants containing polyethylene glycol (PEG) groups, PEG preferential hydration at the micelle-water interface is expected to drive micelle diffusiophoresis from high to low salt concentration. However, micelles are reversible supramolecular assemblies, with salts being able to promote a significant change in micelle size. This phenomenon complicates the description of diffusiophoresis. Specifically, it is not clear to what extent the salt-induced growth of micelles affects micelle diffusiophoresis. In this paper, a multiple-equilibrium model is developed for assessing the contribution of the micelle growth and preferential hydration mechanisms to the diffusiophoresis of non-ionic micelles. The available experimental data characterizing the effect of NaCl on Triton X-100 aggregation number are combined with data on diffusiophoresis and the preferential hydration of PEG chains to show that the contribution of the micelle growth mechanism to overall diffusiophoresis is small compared to that of preferential hydration.

Mechanisms of Triton X-100 reducing the Ag+-resistance of Enterococcus faecalis.

To investigate the mechanism of Triton X-100 (TX-100) reducing the Ag+-resistance of Enterococcus faecalis (E. faecalis), and evaluate the antibacterial effect of TX-100 + Ag+ against the induced Ag+-resistant E. faecalis (AREf). The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of AgNO3 against E. faecalis with/without TX-100 were determined to verify the enhanced antibacterial activity. Transmission electron microscopy (TEM) was used to observe the morphological changes of E. faecalis after treatment. The intra- and extracellular concentration of Ag+ in treated E. faecalis was evaluated using inductively coupled plasma mass spectrometer (ICP-MS). The changes in cell membrane potential and integrity of treated E. faecalis were also observed using the flow cytometer. Moreover, AREf was induced through continuous exposure to sub-MIC of Ag+ and the antibacterial effect of TX-100 + Ag+ on AREf was further evaluated. The addition of 0.04% TX-100 showed maximal enhanced antibacterial effect of Ag+ against E. faecalis. The TEM and ICP-MS results demonstrated that TX-100 could facilitate Ag+ to enter E. faecalis through changing the membrane structure and integrity. Flow cytometry further showed the effect of TX-100 on membrane potential and permeability of E. faecalis. In addition, the enhanced antibacterial effect of TX-100 + Ag+ was also confirmed on induced AREf. TX-100 can facilitate Ag+ to enter E. faecalis through disrupting the membrane structure and changing the membrane potential and permeability, thus reducing the Ag+-resistance of E. faecalis and enhancing the antibacterial effect against either normal E. faecalis or induced AREf.

C4BP(ß-)-mediated immunomodulation attenuates inflammation in DSS-induced murine colitis and in myeloid cells from IBD patients.

The most recent and promising therapeutic strategies for inflammatory bowel disease (IBD) have engaged biologics targeting single effector components involved in major steps of the immune-inflammatory processes, such as tumor necrosis factor, interleukins or integrins. Nevertheless, these molecules have not yet met expectations regarding efficacy and safety, resulting in a significant percentage of refractory or relapsing patients. Thus, novel treatment options are urgently needed. The minor isoform of the complement inhibitor C4b-binding protein, C4BP(ß-), has been shown to confer a robust anti-inflammatory and immunomodulatory phenotype over inflammatory myeloid cells. Here we show that C4BP(ß-)-mediated immunomodulation can significantly attenuate the histopathological traits and preserve the intestinal epithelial integrity in dextran sulfate sodium (DSS)-induced murine colitis. C4BP(ß-) downregulated inflammatory transcripts, notably those related to neutrophil activity, mitigated circulating inflammatory effector cytokines and chemokines such as CXCL13, key in generating ectopic lymphoid structures, and, overall, prevented inflammatory immune cell infiltration in the colon of colitic mice. PRP6-HO7, a recombinant curtailed analogue with only immunomodulatory activity, achieved a similar outcome as C4BP(ß-), indicating that the therapeutic effect is not due to the complement inhibitory activity. Furthermore, both C4BP(ß-) and PRP6-HO7 significantly reduced, with comparable efficacy, the intrinsic and TLR-induced inflammatory markers in myeloid cells from both ulcerative colitis and Crohn's disease patients, regardless of their medication. Thus, the pleiotropic anti-inflammatory and immunomodulatory activity of PRP6-HO7, able to "reprogram" myeloid cells from the complex inflammatory bowel environment and to restore immune homeostasis, might constitute a promising therapeutic option for IBD.

Magnetron sputtering onto nonionic surfactant for 1-step preparation of metal nanoparticles without additional chemical reagents.

Plasma-based sputtering onto liquids (SoL) is a straightforward approach for synthesizing small metal nanoparticles (NPs) without additional stabilizing reagents. In this work, nonionic surfactant Triton X-100 was used for the first time as a host liquid for the SoL process and the production of colloidal solutions of gold, silver and copper NPs was demonstrated. The average diameter of spherical Au NPs lies in the range from 2.6 to 5.5 nm depending on the conditions. The approach presented here opens the pathway to the production of concentrated dispersions of metal NPs of high purity that can be dispersed in water for future usage, therefore extending further the reach of this synthesis pathway.

Breast cancer nipple discharge exosomal microRNAs are stable under degradative conditions.

We have previously shown that microRNAs (miRNAs) in nipple discharge are potential diagnostic biomarkers. In particular, exosomes are present in nipple discharge. Herein, we sought to elucidate the protective role of exosomes on miRNAs in nipple discharge and investigate the stability of miRNAs encapsulated in exosomes under degradative conditions. A novel TTMAAlPc-RNA complex method was used to measure the RNase concentration in colostrum and nipple discharge. Quantitative real-time polymerase chain reaction was performed to test the stability of exogenous synthetic miRNAs (cel-lin-4-5p and cel-miR-2-3p) and endogenous miRNAs (hsa-miR-4732-5p, hsa-miR-3646, hsa-miR-4484, and kshv-miR-K12-5-5p). RNase was present and functional in colostrum and nipple discharge. Endogenous miRNAs were more stably expressed compared to exogenous miRNAs at room temperature and 4°C. Triton X-100 (1%, 30 min) destroyed the exosomal membrane, causing RNA degradation in colostrum but not in nipple discharge. Therefore, we confirmed that exosomes in colostrum and nipple discharge could protect miRNAs from degradation by RNase. Exosomes in nipple discharge may be more resistant to Triton X-100 lysis compared to those in the colostrum. Exosomal miRNAs in nipple discharge in breast cancer are stable under degradative conditions. Differential Triton X-100 sensitivity of exosomes of nipple discharge and colostrum warrants further investigation.

Graphene Inks Printed by Aerosol Jet for Sensing Applications: The Role of Dispersant on the Inks' Formulation and Performance.

This study presents graphene inks produced through the liquid-phase exfoliation of graphene flakes in water using optimized concentrations of dispersants (gelatin, triton X-100, and tween-20). The study explores and compares the effectiveness of the three different dispersants in creating stable and conductive inks. These inks can be printed onto polyethylene terephthalate (PET) substrates using an aerosol jet printer. The investigation aims to identify the most suitable dispersant to formulate a high-quality graphene ink for potential applications in printed electronics, particularly in developing chemiresistive sensors for IoT applications. Our findings indicate that triton X-100 is the most effective dispersant for formulating graphene ink (GTr), which demonstrated electrical conductivity (4.5 S·cm-1), a high nanofiller concentration of graphene flakes (12.2%) with a size smaller than 200 nm (<200 nm), a low dispersant-to-graphene ratio (5%), good quality as measured by Raman spectroscopy (ID/IG ≈ 0.27), and good wettability (θ ≈ 42°) over PET. The GTr's ecological benefits, combined with its excellent printability and good conductivity, make it an ideal candidate for manufacturing chemiresistive sensors that can be used for Internet of Things (IoT) healthcare and environmental applications.

Detergent-Mediated Virus Inactivation in Biotechnological Matrices: More than Just CMC.

For decades, the ability of detergents to solubilize biological membranes has been utilized in biotechnological manufacturing to disrupt the lipid envelope of potentially contaminating viruses and thus enhance the safety margins of plasma- and cell-derived drugs. This ability has been linked to detergent micelles, which are formed if the concentration of detergent molecules exceeds the critical micelle concentration (CMC). Traditionally, the CMC of detergents is determined in deionized water (ddH2O), i.e., a situation considerably different from the actual situation of biotechnological manufacturing. This study compared, for five distinct detergents, the CMC in ddH2O side-by-side with two biopharmaceutical process intermediates relevant to plasma-derived (Immunoglobulin) and cell-derived (monoclonal antibody) products, respectively. Depending on the matrix, the CMC of detergents changed by a factor of up to ~4-fold. Further, the CMC in biotechnological matrices did not correlate with antiviral potency, as Triton X-100 (TX-100) and similar detergents had comparatively higher CMCs than polysorbate-based detergents, which are known to be less potent in terms of virus inactivation. Finally, it was demonstrated that TX-100 and similar detergents also have virus-inactivating properties if applied below the CMC. Thus, the presence of detergent micelles might not be an absolute prerequisite for the disruption of virus envelopes.

Efficient removal of polybrominated diphenyl ethers from soil washing effluent by dummy molecular imprinted adsorbents: Selectivity and mechanisms.

Surfactant enhanced elution is an effective method for removing hydrophobic organic pollutants from soils. The key to the development of leaching technology is selective removal of targeted pollutants in soil washing effluent and recycling of surfactant solutions. In this study, a molecular imprinting technique was applied to selectively sorb polybrominated diphenyl ethers (PBDEs) in soil washing effluent. The novel molecular imprinted polymers (MIPs) using different template molecules were synthesized by precipitation polymerization. Adsorption behaviors and mechanisms of MIPs were studied through experiments and theoretical calculations. The results show that 4-bromo-4'-hydroxybiphenyl and toluene can be effective imprinting molecule for MIPs synthesis. The maximal adsorption capacity of selected dummy molecular imprinted polymer (D1-MIP) was 1032.36 µmol/g, and that of part molecular imprinted polymer (P-MIP) was 981.13 µmol/g. Their imprinting factors in 5 PBDEs adsorption ranged from 2.13 to 5.88, the recovery percentage of Triton X-100 can reach 99.09%, confirming the feasibility of reusing surfactant. Various PBDEs could be removed by MIPs, and Quantitative Structure Property Relationship analysis revealed that PBDEs' molecular volume, planarity, polarity, and hydrophobicity have major influences on their adsorption performance. DFT calculation revealed that Van der Waals force and hydrogen bonding played important roles during selective adsorption. These results can provide effective theoretical guidance for surfactant enhanced soil elution in practical engineering applications.

Induction and suppression of cell lysis in an electrokinetic microfluidic system.

The ability to strategically induce or suppress cell lysis is critical for many cellular-level diagnostic and therapeutic applications conducted within electrokinetic microfluidic platforms. The chemical and structural integrity of sub-cellular components is important when inducing cell lysis. However, metal electrodes and electrolytes participate in undesirable electrochemical reactions that alter solution composition and potentially damage protein, RNA, and DNA integrity within device microenvironments. For many biomedical applications, cell viability must be maintained even when device-imposed cell-stressing stimuli (e.g., electrochemical reaction byproducts) are present. In this work, we explored a novel and tunable method to accurately induce or suppress device-imposed artifacts on human red blood cell (RBC) lysis in non-uniform AC electric fields. For precise tunability, a dielectric hafnium oxide (HfO2 ) layer was used to prevent electron transfer between the electrodes and the electric double layer and thus reduce harmful electrochemical reactions. Additionally, a low concentration of Triton X-100 surfactant was explored as a tool to stabilize cell membrane integrity. The extent of hemolysis was studied as a function of time, electrode configuration (T-shaped and star-shaped), cell position, applied non-uniform AC electric field, with uncoated and HfO2 coated electrodes (50 nm), and absence and presence of Triton X-100 (70 µM). Tangible outcomes include a parametric analysis relying upon literature and this work to design, tune, and operate electrokinetic microdevices to intentionally induce or suppress cellular lysis without altering intracellular components. Implications are that devices can be engineered to leverage or minimize device-imposed biological artefacts extending the versatility and utility of electrokinetic diagnostics.

Orthopox viruses and the safety margins of solvent-detergent treated plasma-derived medicinal products.

BACKGROUND: The currently ongoing outbreak of monkeypox virus in many non-endemic countries around the world has also raised concerns about the safety of plasma-derived medicinal products. Based on what is known about the poxviridae, that is, that members are exceedingly large and carry a lipid envelope, effective removal and inactivation by plasma product manufacturing processes is expected. For the widely used solvent-detergent (S/D) treatments, however, poxviruses have been reported as potentially being a bit more resistant. STUDY DESIGN AND METHODS: Using a S/D mixture comprising tri-n-butyl-phosphate, polysorbate 80 and Triton X-100 (TX-100), inactivation of vaccinia virus (a model closely resembling monkeypox virus, both within the same genus, i.e., Orthopoxvirus) in a plasma-derived process intermediate was analyzed over 60 min. As use of Triton X-100 will, based on environmental concerns, be restricted, similar experiments were conducted with a physicochemically virtually identical alternative, Nereid. RESULTS: Fast inactivation of vaccinia virus to the assay detection limit, that is, reduction of infectivity by greater than 4 log10 within 10-20 min, was measured for the TX-100 S/D mixture. The alternative S/D mixture (Nereid instead of TX-100) was found fully equivalent. CONCLUSION: As for other lipid-enveloped viruses, treatment of process intermediates with S/D mixtures containing TX-100 or the closely related detergent Nereid are highly effective in inactivating poxviruses. Thus, the current spread of monkeypox virus does not compromise the viral safety margins of plasma-derived medicines.

Assessing detergent-mediated virus inactivation, protein stability, and impurity clearance in biologics downstream processes.

Detergent-mediated virus inactivation (VI) provides a valuable orthogonal strategy for viral clearance in mammalian processes, in particular for next-generation continuous manufacturing. Furthermore, there exists an industry-wide need to replace the conventionally employed detergent Triton X-100 with eco-friendly alternatives. However, given Triton X-100 has been the gold standard for VI due its minimal impact on protein stability and high inactivation efficacy, inactivation by other eco-friendly detergents and its impact on protein stability is not well understood. In this study, the sugar-based detergent commonly used in membrane protein purification, n-dodecyl-ß- d-maltoside was found to be a promising alternative for VI. We investigated a panel of detergents to compare the relative VI efficacy, impact on therapeutic quality attributes, and clearance of the VI agent and other impurities through subsequent chromatographic steps. Detergent-mediated inactivation and protein stability showed comparable trends to low pH inactivation. Using experimental and modeling data, we found detergent-mediated product aggregation and its kinetics to be driven by extrinsic factors such as detergent and protein concentration. Detergent-mediated aggregation was also impacted by an initial aggregation level as well as intrinsic factors such as the protein sequence and detergent hydrophobicity, and critical micelle concentration. Knowledge gained here on factors driving product stability and VI provides valuable insight to design, standardize, and optimize conditions (concentration and duration of inactivation) for screening of detergent-mediated VI.

Extracellular production of azurin from Pseudomonas aeruginosa in the presence of Triton X-100 or Tween 80.

Azurin which is a bacterial secondary metabolite has attracted much attention as potential anticancer agent in recent years. This copper-containing periplasmic redox protein supresses the tumor growth selectively. High-level secretion of proteins into the culture medium offers a significant advantage over periplasmic or cytoplasmic expression. The aim of this study was to investigate the effect of nonionic surfactants on the expression of the Pseudomonas aeruginosa azurin. Different concentrations of Triton X-100 and Tween 80 were used as supplements in growth media and extracellular azurin production was stimulated by both surfactants. According to western blot analysis results, in the presence of Triton X-100, maximum azurin expression level was achieved with 96 h of incubation at 1% concentration, and 48 h at 2% concentration. On the other hand, maximum azurin expression level was achieved in the presence of 1% Tween 80 at 72 h incubation. This study suggested for the first time a high level of azurin secretion from P. aeruginosa in the presence of Triton X-100 or Tween 80, which would be advantageous for the purification procedure.

Cysteine-Encapsulated Liposome for Investigating Biomolecular Interactions at Lipid Membranes.

The development of a strategy to investigate interfacial phenomena at lipid membranes is practically useful because most essential biomolecular interactions occur at cell membranes. In this study, a colorimetric method based on cysteine-encapsulated liposomes was examined using gold nanoparticles as a probe to provide a platform to report an enzymatic activity at lipid membranes. The cysteine-encapsulated liposomes were prepared with varying ratios of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol through the hydration of lipid films and extrusions in the presence of cysteine. The size, composition, and stability of resulting liposomes were analyzed by scanning electron microscopy (SEM), dynamic light scattering (DLS), nuclear magnetic resonance (NMR) spectroscopy, and UV-vis spectrophotometry. The results showed that the increased cholesterol content improved the stability of liposomes, and the liposomes were formulated with 60 mol % cholesterol for the subsequent experiments. Triton X-100 was tested to disrupt the lipid membranes to release the encapsulated cysteine from the liposomes. Cysteine can induce the aggregation of gold nanoparticles accompanying a color change, and the colorimetric response of gold nanoparticles to the released cysteine was investigated in various media. Except in buffer solutions at around pH 5, the cysteine-encapsulated liposomes showed the color change of gold nanoparticles only after being incubated with Triton X-100. Finally, the cysteine-encapsulated liposomal platform was tested to report the enzymatic activity of phospholipase A2 that hydrolyzes phospholipids in the membrane. The hydrolysis of phospholipids triggered the release of cysteine from the liposomes, and the released cysteine was successfully detected by monitoring the distinct red-to-blue color change of gold nanoparticles. The presence of phospholipase A2 was also confirmed by the appearance of a peak around 690 nm in the UV-vis spectra, which is caused by the cysteine-induced aggregation of gold nanoparticles. The results demonstrated that the cysteine-encapsulated liposome has the potential to be used to investigate biological interactions occurring at lipid membranes.

Supported Lipid Bilayer Platform for Characterizing the Membrane-Disruptive Behaviors of Triton X-100 and Potential Detergent Replacements.

Triton X-100 (TX-100) is a widely used detergent to prevent viral contamination of manufactured biologicals and biopharmaceuticals, and acts by disrupting membrane-enveloped virus particles. However, environmental concerns about ecotoxic byproducts are leading to TX-100 phase out and there is an outstanding need to identify functionally equivalent detergents that can potentially replace TX-100. To date, a few detergent candidates have been identified based on viral inactivation studies, while direct mechanistic comparison of TX-100 and potential replacements from a biophysical interaction perspective is warranted. Herein, we employed a supported lipid bilayer (SLB) platform to comparatively evaluate the membrane-disruptive properties of TX-100 and a potential replacement, Simulsol SL 11W (SL-11W), and identified key mechanistic differences in terms of how the two detergents interact with phospholipid membranes. Quartz crystal microbalance-dissipation (QCM-D) measurements revealed that TX-100 was more potent and induced rapid, irreversible, and complete membrane solubilization, whereas SL-11W caused more gradual, reversible membrane budding and did not induce extensive membrane solubilization. The results further demonstrated that TX-100 and SL-11W both exhibit concentration-dependent interaction behaviors and were only active at or above their respective critical micelle concentration (CMC) values. Collectively, our findings demonstrate that TX-100 and SL-11W have distinct membrane-disruptive effects in terms of potency, mechanism of action, and interaction kinetics, and the SLB platform approach can support the development of biophysical assays to efficiently test potential TX-100 replacements.

Slurry phase biodegradation of heavy oily sludge and evidence of asphaltene biotransformation.

Oily sludge management is a global environmental concern due to its hazardous nature. Oily sludge obtained from a refinery in India had 19-21% oil content. The oil was highly enriched in the asphaltene fraction. Slurry phase biodegradation of this oily sludge in presence of a 3-membered bacterial consortium was optimized in presence of Triton X-100 to increase the bioavailability of hydrocarbons. Triton X-100 at 4 times the critical micelle concentration (CMC) showed the highest degradation where oil removal of 53.1% was achieved from a 10% sludge slurry over 90 days. GCxGC analysis of n-alkanes present in the oily sludge after the biodegradation study showed an increase in the lower n-alkanes, i.e., dodecane and tridecane over the first 30 days, whereas the higher n-alkanes were removed to a much higher extent. Heptadecane showed the maximum extent of degradation with 94.9% removal in 90 days and an initial degradation rate of 0.079 day-1. The, maximum rate of degradation was observed for pentacosane (0.083 day-1) with 93.7% removal in 90 days. The increase in the lower n-alkanes may be attributed to biotic transformation of the asphaltene fraction which was also confirmed through FTIR and pyrolysis GCxGC analysis. Biodegradation was found to cause changes in the pyrolysis product of asphaltenes where four and three-ring pyrolysis products decreased while the one and two-ring pyrolysis products increased. In presence of the consortium asphaltene removal over 90 days was 12% whereas only 0.4% removal was obtained in the abiotic controls.