Active Dendrite Suppression by Ferroelectric Membrane Separators in Rechargeable Batteries.

Anodic dendrite formation is a critical issue in rechargeable batteries and often leads to poor cycling stability and quick capacity loss. Prevailing strategies for dendrite suppression aim at slowing down the growth rate kinetically but still leaving possibilities for dendrite evolution over time. Herein, we report a complete dendrite elimination strategy using a mesoporous ferroelectric polymer membrane as the battery separator. The dendrite suppression is realized by spontaneously reversing the surface energetics for metal ion reduction at the protrusion front, where a positive piezoelectric polarization is generated and superimposed as the protrusion compresses the separator. This effect is demonstrated first in a Zn electroplating process, and further in Zn-Zn symmetric cells and Zn-NaV3O8·1.5H2O full cells, where the dendritic Zn anode surfaces are completely turned into featureless flat surfaces. Consequently, a substantially longer charging/discharging cycle is achieved. This study provides a promising pathway toward high-performance dendrite-free rechargeable batteries.

Unlatching the Additional Zinc Storage Ability of Vanadium Nitride Nanocrystallites.

Vanadium-based materials, due to their diverse valence states and open-framework lattice, are promising cathodes for aqueous zinc ion batteries (AZIBs), but encounters the major challenges of in situ electrochemical activation process, potent polarity of the aqueous electrolyte and periodic expansion/contraction for efficient Zn2+ storage. Herein, architecting vanadium nitride (VN) nanosheets over titanium-based hollow nanoarrays skeletal host (denoted VNTONC) can simultaneously modulate address those challenges by creating multiple interfaces and maintaining the (1 1 1) phase of VN, which optimizes the Zn2+ storage and the stability of VN. Benefiting from the modulated crystalline thermodynamics during the electrochemical activation of VN, two outcomes are achieved; I) the cathode transforms into a nanocrystalline structure with increased active sites and higher conductivity and; II) a significant portion of the (1 1 1) crystal facets is retained in the process leading to the additional Zn2+ storage capacity. As a result, the as-prepared VNTONC electrode demonstrates remarkable discharge capacities of 802.5 and 331.8 mAh g-1 @ 0.5 and 6.0 A g-1, respectively, due to the enhanced kinetics as validated by theoretical calculations. The assembled VNTONC||Zn flexible ZIB demonstrates excellent Zn storage properties up to 405.6 mAh g-1, and remarkable robustness against extreme operating conditions.

Structural Evolution of Manganese Prussian Blue Analogue in Aqueous ZnSO4 Electrolyte.

Among different Prussian Blue Analogues (PBAs), manganese hexacyanoferrate (MnHCF), with open framework and two abundant electroactive metal sites, exhibits high potential for the grid-scale aqueous rechargeable zinc-ion batteries (ARZIBs) application. Until now, the intercalation mechanism of Zn2+ into MnHCF has not been clearly illustrated. In this work, combining different synchrotron X-ray techniques, the structural and microscopic evolution of MnHCF in 3 m ZnSO4 electrolyte is comprehensively studied, and a thorough understanding of the intercalation/release dynamic, in terms of local and long-range domain, is provided. The elemental distribution and structural information of Fe, Mn, Zn inside MnHCF electrodes is obtained from the X-ray fluorescence (XRF) elemental maps and X-ray absorption spectroscopy (XAS). The in-depth analysis of extended X-ray absorption fine structure (EXAFS) signals confirm that the rearrangement of Mn site, evidencing the cleavage of the Mn─N bond with the formation of a Mn─O bond, in an octahedral environment. The phase transformation of MnHCF takes place exclusively during the 1st cycle, and a mixture of rhombohedral and cubic zinc hexacynoferrate (ZnHCF) phases are formed during the first charge process. Thereafter, the newly formed cubic ZnHCF phase becomes the only stable one, existing in the subsequent cycles and exhibiting excellent electrochemical stability.

Less is More: Underlying Mechanism of Zn Electrode Long-Term Stability using Sodium L-Ascorbate as Electrolyte Additive.

Structured passivation layers and hydrated Zn2+ solvation structure strongly influence Zn depositions on Zn electrodes and then the cycle life and electrochemical performance of aqueous zinc ion batteries. To achieve these, the electrolyte additive of sodium L-ascorbate (Ass) is introduced into aqueous zinc sulfate (ZnSO4, ZS) electrolyte solutions. Combined experimental characterizations with theoretical calculations, the unique passivation layers with vertical arrayed micro-nano structure are clearly observed, as well as the hydrated Zn2+ solvation structure is changed by replacing two ligand water molecules with As-, thus regulating the wettability and interfacial electric field intensity of Zn surfaces, facilitating rapid ionic diffusions within electrolytes and electrodes together with the inhibited side reactions and uniform depositions of Zn2+. When tested in Zn||Zn symmetric cell, the electrolyte containing Ass is extraordinarily stably operated for the long time ≈3700 h at both 1 mA cm-2 and 1 mAh cm-2. In Zn||MnO2 full coin cells, the energy density can still maintain as high as ≈184 Wh kg-1 at the power density high up to 2 kW kg-1, as well as the capacity retention can reach up to 80.5% even after 1000 cycles at 2 A g-1, which are substantially superior to the control cells.

Constructing Dynamic Cross-Linking Networks as Durable Bifunctional Coating for Highly Stable Zinc Anodes.

The serious dendrite growth and H2O-induced side reactions on the Zn electrode lead to a significant fading in the cycling performance, hindering the development of commercial applications of aqueous Zn-ion batteries (AZIBs). Herein, a novel bifunctional network coating of dynamically cross-linking sodium alginate with trehalose has been rationally constructed on the Zn anode (Zn@AT). Firstly, the AT coating possesses abundant zinophilic oxygen-containing functional groups, which are able to induce uniform Zn2+ ion flux. Secondly, the AT coating as a solid barrier can effectively inhibit H2O-induced side reactions by lowering the activity of H2O molecules. More specially, based on the dynamic cross-linking, AT network coating is endowed with self-healing capacity during cycling for durable battery operation. Consequentially, Zn@AT anodes in symmetric cells can cycle stably for 2787 h at 2 mA cm-2/2 mAh cm-2, and even achieve a significantly long cycle performance of 1087 h at large charge/discharge depths of 10 mA cm-2/10 mAh cm-2. Moreover, the Zn@AT//MnO2 full cell shows excellent specific capacity of 175 mAh g-1 after 400 cycles. This study lights an effective strategy to enhance the durability of Zn electrodes in AZIBs.

Vanadium-Based Cathodic Materials of Aqueous Zn-Ion Battery for Superior-Performance with Prolonged-Life Cycle.

Aqueous Zn-ion battery systems (AZIBs) have emerged as the most dependable solution, as demonstrated by successful systematic growth over the past few years. Cost effectivity, high performance and power density with prolonged life cycle are some major reason of the recent progress in AZIBs. Development of vanadium-based cathodic materials for AZIBs has appeared widely. This review contains a brief display of the basic facts and history of AZIBs. An insight section on zinc storage mechanism ramifications is given. A detailed discussion is conducted on features of high-performance and long life-time cathodes. Such features include design, modifications, electrochemical and cyclic performance, along with stability and zinc storage pathway of vanadium based cathodes from 2018 to 2022. Finally, this review outlines obstacles and opportunities with encouragement for gathering a strong conviction for future advancement in vanadium-based cathodes for AZIBs.

Mechanism of Chalcophanite Nucleation in Zinc Hydroxide Sulfate Cathodes in Aqueous Zinc Batteries.

Aqueous Zn-ion batteries with MnO2-based cathodes have seen significant attention owing to their high theoretical capacities, safety, and low cost; however, much debate remains regarding the reaction mechanism that dominates energy storage. In this work, we report our electron microscopy study of cathodes containing zinc hydroxide sulfate (Zn4SO4(OH)6·xH2O, ZHS) together with carbon nanotubes cycled in electrolytes containing ZnSO4 with varied amounts of MnSO4 incorporated. The primary Mn-containing phase is formed in situ in the cathode during cycling, where a dissolution-deposition reaction is identified between ZHS and chalcophanite (ZnMn3O7·3H2O). Mechanistic details of this reaction, in which the chalcophanite nucleates then separates from the ZHS flakes as the ZHS dissolves while acting as the primary Zn source for the reaction, are revealed using surface sensitive methods. These findings indicate the reaction is local to the ZHS flakes, providing new insight toward the importance of ZHS and the cathode microstructure.

Atomic Level-Macroscopic Structure-Activity of Inhomogeneous Localized Aggregates Enabled Ultra-Low Temperature Hybrid Aqueous Batteries.

The utilization of hybrid aqueous electrolytes has significantly broadened the electrochemical and temperature ranges of aqueous batteries, such as aqueous zinc and lithium-ion batteries, but the design principles for extreme operating conditions remain poorly understood. Here, we systematically unveil the ternary interaction involving salt-water-organic co-solvents and its intricate impacts on both the atomic-level and macroscopic structural features of the hybrid electrolytes. This highlights a distinct category of micelle-like structure electrolytes featuring organic-enriched phases and nanosized aqueous electrolyte aggregates, enabled by appropriate low donor number co-solvents and amphiphilic anions. Remarkably, the electrolyte enables exceptional high solubility, accommodating up to 29.8 m zinc triflate within aqueous micelles. This configuration maintains an intra-micellar salt-in-water setup, allowing for a broad electrochemical window (up to 3.86 V), low viscosity, and state-of-the-art ultralow-temperature zinc ion conductivity (1.58 mS cm-1 at -80 °C). Building upon the unique nature of the inhomogeneous localized aggregates, this micelle-like electrolyte facilitates dendrite-free Zn plating/stripping, even at -80 °C. The assembled Zn||PANI battery showcases an impressive capacity of 71.8 mAh g-1 and an extended lifespan of over 3000 cycles at -80 °C. This study opens up a promising approach in electrolyte design that transcends conventional local atomic solvation structures, broadening the water-in-salt electrolyte concept.

Flexible Zn-ion Electrochromic Batteries with Multiple-color Variations.

Electrochromic batteries as emerging smart energy devices are highly sought after owing to their real-time energy monitoring through visual color conversion. However, their large-scale applicability is hindered by insufficient capacity, inadequate cycling stability, and limited color variation. Herein, a flexible Zn-ion electrochromic battery (ZIEB) was assembled with sodium vanadate (VONa+) cathode, ion-redistributing hydrogel electrolyte, and Zn anode to address these challenges. The electrolyte contains anchored -SO3 - and -NH3 +, which facilitates ionic transportation and prevents Zn dendrite formation by promoting orientated Zn2+ deposition on the Zn (002) surface. The ZIEB exhibits a continuous reversible color transition, ranging from fully charged orange to mid-charged brown and drained green. It also demonstrates a high specific capacity of 302.4 mAh ⋅ g-1 at 0.05 A ⋅ g-1 with a capacity retention of 96.3 % after 500 cycles at 3 A ⋅ g-1. Additionally, the ZIEB maintains stable energy output even under bending, rolling, knotting, and twisting. This work paves a new strategy for the design of smart energy devices in wearable electronics.

Nonionic Surfactant-Assisted In Situ Generation of Stable Passivation Protective Layer for Highly Stable Aqueous Zn Metal Anodes.

A highly stable interface for aqueous rechargeable Zn batteries is of importance to inhibit the growth of Zn dendrites and suppress the side reactions. In this work, we have developed a stable honeycomb-like ZnO passivation protective layer on the Zn surface, which is in situ generated with the assistance of a nonionic surfactant additive (polyethylene glycol tert-octylphenyl ether, denoted as PEGTE). The ZnO passivation layer can facilitate the uniform distribution of the electric field, guiding the uniform deposition of Zn2+ and inhibit the generation of dendrites. As a result, the symmetric cell using the electrolyte with PEGTE shows an excellent performance at high areal capacity, reflected by stable cycling for over 2400 h at 5 mAh/cm2 and 1300 h at 10 mAh/cm2. The full cell paired with V2O5 demonstrates a long lifespan for more than 600 cycles at a low negative/positive capacity ratio.

pH-Triggered Molecular Switch Toward Texture-Regulated Zn Anode.

Zn electrodes in aqueous media exhibit an unstable Zn/electrolyte interface due to severe parasitic reactions and dendrite formation. Here, a dynamic Zn interface modulation based on the molecular switch strategy is reported by hiring γ-butyrolactone (GBL) in ZnCl2 /H2 O electrolyte. During Zn plating, the increased interfacial alkalinity triggers molecular switch from GBL to γ-hydroxybutyrate (GHB). GHB strongly anchors on Zn surface via triple Zn-O bonding, leading to suppressive hydrogen evolution and texture-regulated Zn morphology. Upon Zn stripping, the fluctuant pH turns the molecular switch reaction off through the cyclization of GHB to GBL. This dynamic molecular switch strategy enables high Zn reversibility with Coulombic efficiency of 99.8 % and Zn||iodine batteries with high-cyclability under high Zn depth of discharge (50 %). This study demonstrates the importance of dynamic modulation for Zn electrode and realizes the reversible molecular switch strategy to enhance its reversibility.

Synergistic Modulation of In-Situ Hybrid Interface Construction and pH Buffering Enabled Ultra-Stable Zinc Anode at High Current Density and Areal Capacity.

In aqueous electrolytes, the uncontrollable interfacial evolution caused by a series of factors such as pH variation and unregulated Zn2+ diffusion would usually result in the rapid failure of metallic Zn anode. Considering the high correlation among various triggers that induce the anode deterioration, a synergistic modulation strategy based on electrolyte modification is developed. Benefitting from the unique pH buffer mechanism of the electrolyte additive and its capability to in situ construct a zincophilic solid interface, this synergistic effect can comprehensively manage the thermodynamic and kinetic properties of Zn anode by inhibiting the pH variation and parasitic side reactions, accelerating de-solvation of hydrated Zn2+ , and regulating the diffusion behavior of Zn2+ to realize uniform Zn deposition. Thus, the modified Zn anode can achieve an impressive lifespan at ultra-high current density and areal capacity, operating stably for 609 and 209 hours at 20 mA cm-2 , 20 mAh cm-2 and 40 mA cm-2 , 20 mAh cm-2 , respectively. Based on this exceptional performance, high loading Zn||NH4 V4 O10 batteries can achieve excellent cycle stability and rate performance. Compared with those previously reported single pH buffer strategies, the synergistic modulation concept is expected to provide a new approach for highly stable Zn anode in aqueous zinc-ion batteries.

High-Current Capable and Non-Flammable Protic Organic Electrolyte for Rechargeable Zn Batteries.

Rechargeable Zinc batteries (RZBs) are considered a potent competitor for next-generation electrochemical devices, due to their multiple advantages. Nevertheless, traditional aqueous electrolytes may cause serious hazards to long-term battery cycling through fast capacity fading and poor Coulombic efficiency (CE), which happens due to complex reaction kinetics in aqueous systems. Herein, we proposed the novel adoption of the protic amide solvent, N-methyl formamide (NMF) as a Zinc battery electrolyte, which possesses a high dielectric constant and high flash point to promote fast kinetics and battery safety simultaneously. Dendrite-free and granular Zn deposition in Zn-NMF electrolyte assures ultra-long lifespan of 2000 h at 2.0 mA cm-2 /2.0 mAh cm-2 , high CE of 99.57 %, wide electrochemical window (≈3.43 V vs. Zn2+ /Zn), and outstanding durability up to 10.0 mAh cm-2 . This work sheds light on the efficient performance of the protic non-aqueous electrolyte, which will open new opportunities to promote safe and energy-dense RZBs.

High-Capacity and Long-Life Zinc Electrodeposition Enabled by a Self-Healable and Desolvation Shield for Aqueous Zinc-Ion Batteries.

Artificial interfaces can alleviate the side reactions and the formation of the metallic (e.g., Li, Na, and Zn) dendrites. However, the traditional ones always breakdown during the repeated plating/stripping and fail to regulate the electrodeposition behaviors of the electrodes. Herein, a self-healable ion regulator (SIR) is designed as a desolvation shield to protect the Zn electrodes and guide the Zn electrodeposition. Benefiting from the intermolecular hydrogen bonds, SIR shows a superb capability to in situ repair the plating/stripping-induced cracks. Besides, the results of theoretical calculations and electrochemical characterizations show that the coating reduces water molecules in the solvated sheath of hydrated Zn2+ and restrains the random Zn2+ diffusion on the Zn surface. Even with a coating layer of only 360 nm, the SIR-modified Zn electrode exhibits excellent long-term stability for >3500 h at 2 mAh cm-2 and >950 h at an ultrahigh areal capacity of 20 mAh cm-2 .

Boosting Zinc Electrode Reversibility in Aqueous Electrolytes by Using Low-Cost Antisolvents.

Antisolvent addition has been widely studied in crystallization in the pharmaceutical industries by breaking the solvation balance of the original solution. Here we report a similar antisolvent strategy to boost Zn reversibility via regulation of the electrolyte on a molecular level. By adding for example methanol into ZnSO4 electrolyte, the free water and coordinated water in Zn2+ solvation sheath gradually interact with the antisolvent, which minimizes water activity and weakens Zn2+ solvation. Concomitantly, dendrite-free Zn deposition occurs via change in the deposition orientation, as evidenced by in situ optical microscopy. Zn reversibility is significantly boosted in antisolvent electrolyte of 50 % methanol by volume (Anti-M-50 %) even under harsh environments of -20 °C and 60 °C. Additionally, the suppressed side reactions and dendrite-free Zn plating/stripping in Anti-M-50 % electrolyte significantly enhance performance of Zn/polyaniline coin and pouch cells. We demonstrate this low-cost strategy can be readily generalized to other solvents, indicating its practical universality. Results will be of immediate interest and benefit to a range of researchers in electrochemistry and energy storage.

Highly Reversible and Rechargeable Safe Zn Batteries Based on a Triethyl Phosphate Electrolyte.

Zinc metal is an attractive anode material for next-generation batteries. However, dendrite growth and limited Coulombic efficiency (CE) during cycling are the major roadblocks towards the widespread commercialization of batteries employing Zn anodes. In this work we report the novel adoption of triethyl phosphate (TEP) as a solvent and co-solvent with aqueous electrolytes to obtain a highly stable and dendrite-free Zn anode. Stable Zn plating/stripping for over 3000 h was obtained, accompanied by a CE of 99.68 %. SEM images of the Zn anodes revealed highly porous interconnected dendrite-free Zn deposits. The electrolyte displayed good compatibility with both Zn anodes and potassium copper hexacyanoferrate (KCuHCf) cathodes for Zn ion batteries (ZIBs). The full cell showed a long cycling stability and high rate capability. The present work is a contribution towards cost-effective and safe battery systems.

Liquid Metal-Based Stable and Stretchable Zn-Ion Battery for Electronic Textiles.

Electronic textiles harmoniously interact with the human body and the surrounding environment, offering tremendous interest in smart wearable electronics. However, their wide application faces challenges due to the lack of stable and stretchable power electrodes/devices with multifunctional design. Herein, an intrinsically stretchable liquid metal-based fibrous anode for a stable Zn-ion battery (ZIB) is reported. Benefiting from the liquid feature and superior deformability of the liquid metal, optimized Zn ion concentration distribution and Zn (002) deposition behavior are observed, which result in dendrite-free performance even under stretching. With a strain of 50%, the ZIB maintains a high capacity of 139.8 mAh cm-3 (corresponding to 83.0% of the initial value) after 300 cycles, outperforming bare Zn fiber-based ZIB. The fibrous ZIB seamlessly integrates with the sensor, Joule heater, and wirelessly charging device, which provides a stable power supply for human signal monitoring and personal thermal management, holding promise for the application of wearable multifunctional electronic textiles.

Towards low-temperature dendrite-free zinc anode by constructing functional MXene buffer layer with duplex zincophilic sites.

Dendrite growth and side reactions of zinc metal anode have severely limited the practical application of aqueous zinc ion batteries (AZIBs). Herein, we introduce an artificial buffer layer composed of functional MXene (Ti3CN) for zinc anodes. The synthesized Ti3CN exhibits superior conductivity and features duplex zincophilic sites (N and F). These characteristics facilitate the homogeneous deposition of Zn2+, accelerate the desolvation process of hydrated Zn2+, and reduce the nucleation overpotential. The Ti3CN-protected Zn anode demonstrates significantly enhanced reversibility compared to bare Zn anode during long-term cycling, achieving a cumulative plating capacity of 10,000 mAh cm-2 at 10 mA cm-2. In Ti3CN-Zn||Cu asymmetric cell, it maintains nearly 100 % Coulombic efficiency over 2500 cycles at 2 mA cm-2. Furthermore, the assembled Ti3CN-Zn//δ-K0.51V2O5 (KVO) full cell exhibit a low capacity decay rate of 0.002 % per cycle at 5 A/g. Even at 0 °C, the Ti3CN-Zn symmetric cell maintains steady cycling for 2000 h. This study introduces a novel approach for designing artificial solid electrolyte interlayers for commercial AZIBs.

Dendrite-free Zn anode enabled by combining carbon nanoparticles hydrophobic layer with crystal face reconstruction toward high-performance Zn-ion battery.

Aqueous zinc ion batteries (ZIBs) have been considered promising energy storage systems due to their excellent electrochemical performance, environmental toxicity, high safety and low cost. However, uncontrolled dendrite growth and side reactions at the zinc anode have seriously hindered the development of ZIBs. Herein, we prepared the carbon nanoparticles layer coated zinc anode with (103) crystal plane preferential oriented crystal structure (denoted as C@RZn) by a facile one-step vapor deposition method. The preferential crystallographic orientation of (103) crystal plane promotes zinc deposition at a slight angle, effectively preventing the formation of Zn dendrites on the surface. In addition, the hydrophobic layer of carbon layer used as an inert physical barrier to prevent corrosion reaction and a buffer during volume changes, thus improving the reversibility of the zinc anode. As a result. the C@RZn anode achieves a stable cycle performance of more than 3000 h at 1 mA cm-2 with CE of 99.77 % at 5 mA cm-2. The full battery with C@RZn anode and Mn-doped V6O13 (MVO) cathode show stability for 5000 cycles at the current density of 5 A g-1. This work provides a new approach for the design of multifunctional interfaces for Zn anode.

Zn-ion ultrafluidity via bioinspired ion channel for ultralong lifespan Zn-ion battery.

Rechargeable aqueous Zn-ion batteries have been deemed a promising energy storage device. However, the dendrite growth and side reactions have hindered their practical application. Herein, inspired by the ultrafluidic and K+ ion-sieving flux through enzyme-gated potassium channels (KcsA) in biological plasma membranes, a metal-organic-framework (MOF-5) grafted with -ClO4 groups (MOF-ClO4) as functional enzymes is fabricated to mimic the ultrafluidic lipid-bilayer structure for gating Zn2+ 'on' and anions 'off' states. The MOF-ClO4 achieved perfect Zn2+/SO4 2- selectivity (∼10), enhanced Zn2+ transfer number ([Formula: see text]) and the ultrafluidic Zn2+ flux (1.9 × 10-3 vs. 1.67 mmol m-2 s-1 for KcsA). The symmetric cells based on MOF-ClO4 achieve a lifespan of over 5400 h at 10 mA cm-2/20 mAh cm-2. Specifically, the performance of the PMCl-Zn//V2O5 pouch cell keeps 81% capacity after 2000 cycles at 1 A g-1. The regulated ion transport, by learning from a biological plasma membrane, opens a new avenue towards ultralong lifespan aqueous batteries.