RESUMEN
BACKGROUND: In total hip arthroplasty (THA), femoral offset restoration results in optimal biomechanics and range of motion (ROM) without bone-bone impingement. We hypothesized that differences in implant design features significantly affect bone-bone impingement risk in primary THA. METHODS: This retrospective computer simulation study included a cohort of 43 primary robotic arm-assisted THA. Considering sagittal pelvic tilt, we measured the maximum external rotation at 0° hip flexion and the maximum internal rotation at both 90° and 100° hip flexion before any bone-bone impingement occurred. To influence the offset, we included neutral or extended polyethylene liners, neutral or plus prosthetic heads, standard or high-offset stems, and stems with 132° or 127° neck angles. RESULTS: Extended polyethylene liner use resulted in decreased bone-bone impingement for both stems but also decreased prosthetic ROM in hip extension (mean -4.5 to 5°, range -10 to 0°) and hip flexion (mean -3 to 3.7°, range -10 to 0°) due to decreases in head diameter. Using a plus head or different stem offset/neck angle options resulted in either (1) no improvement in ROM (stem 1: 60%; stem 2: 28%) or (2) a paradoxical increase in bone-bone impingement (stem 1 with 127°: 19% and stem 2 with high offset option: 7%). CONCLUSION: Counterintuitively, a subset of patients experience a paradoxical increase in bone-bone impingement when transitioning from standard to high-offset or varus necks due to the pelvic and proximal femoral bone shape. For this group of patients, preoperative personalized 3-dimensional modeling may help guide implant choice for optimizing outcomes.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Humanos , Artroplastia de Reemplazo de Cadera/métodos , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/cirugía , Simulación por Computador , Estudios Retrospectivos , Rango del Movimiento Articular , PolietilenoRESUMEN
Bearings are crucial components of machinery and equipment, and it is essential to inspect them thoroughly to ensure a high pass rate. Currently, bearing scratch detection is primarily carried out manually, which cannot meet industrial demands. This study presents research on the detection of bearing surface scratches. An improved YOLOV5 network, named YOLOV5-CDG, is proposed for detecting bearing surface defects using scratch images as targets. The YOLOV5-CDG model is based on the YOLOV5 network model with the addition of a Coordinate Attention (CA) mechanism module, fusion of Deformable Convolutional Networks (DCNs), and a combination with the GhostNet lightweight network. To achieve bearing surface scratch detection, a machine vision-based bearing surface scratch sensor system is established, and a self-made bearing surface scratch dataset is produced as the basis. The scratch detection final Average Precision (AP) value is 97%, which is 3.4% higher than that of YOLOV5. Additionally, the model has an accuracy of 99.46% for detecting defective and qualified products. The average detection time per image is 263.4 ms on the CPU device and 12.2 ms on the GPU device, demonstrating excellent performance in terms of both speed and accuracy. Furthermore, this study analyzes and compares the detection results of various models, demonstrating that the proposed method satisfies the requirements for detecting scratches on bearing surfaces in industrial settings.
RESUMEN
INTRODUCTION: The role of different femoral head materials for total hip arthroplasty (THA) has been widely studied in the context of wear properties and corrosion. Cobalt chrome (CoCr) femoral heads are commonly used as a standard of comparison to other materials such as ceramic and oxidized zirconium (OxZi). This study aims to evaluate the impact of femoral head material on clinical outcomes in elective primary THA patients. METHODS: Retrospective analysis of THA patients within the Medicare claims database between October 2017 and September 2020 using diagnosis-related group codes was conducted. Information collected included sex, age, Charlson Comorbidity Index, and femoral head type. Patients with CoCr femoral heads were compared against patients with either OxZi or ceramic femoral heads using 1:1 propensity score matching. Z-testing and Chi-square analysis were used to determine between-group significance. RESULTS: In total, 112,960 elective THA patients were included, with 56,480 in OxZi or ceramic and 56,480 in CoCr. Readmission rates were lower in patients that received OxZi or ceramic femoral heads at 30-day (p < 0.0001), 60-day (p < 0.0001), and 90-day postoperatively (p < 0.0001) compared to CoCr. Mortality rates were also lower in patients that received OxZi or ceramic femoral heads at 30-day (p = 0.004), 60-day (p = 0.018), and 90-day postoperatively (p = 0.009) compared to CoCr. CONCLUSION: CoCr femoral heads had higher rates of readmissions and mortality compared to OxZi or ceramic. Further analysis of bearing surface combinations and sub-group analyses to determine significance between-group differences is needed. LEVEL III EVIDENCE: Retrospective analysis.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Humanos , Anciano , Estados Unidos/epidemiología , Cabeza Femoral/cirugía , Readmisión del Paciente , Estudios Retrospectivos , Factores de Tiempo , Diseño de Prótesis , Medicare , Aleaciones de Cromo , Circonio , Cerámica , Falla de PrótesisRESUMEN
BACKGROUND: Constrained inserts in total knee arthroplasty (TKA) may offer additional stability, but can this insert type allow unrestricted movements or will the extra conformity cause kinematic conflict with the cam-post mechanism in deeper flexion? The objective of this study was to evaluate the weight-bearing kinematics of both traditional and constrained bicruciate stabilized (BCS) TKA inserts to determine if the rollback induced by the cam-post mechanism will work in unison with the constrained polyethylene insert. METHODS: This study used previously published 3-dimensional model fitting techniques to compare weight-bearing flexion and femoro-tibial condylar motion patterns for 20 patients who had a traditional insert, 20 patients who had a constrained insert, and 10 previously published nonimplanted knees, all performing a deep knee bend activity while under fluoroscopic surveillance. RESULTS: The results from this study indicate that subjects having a bicruciate stabilized TKA experienced similar postoperative kinematics for both constrained and unconstrained insert options, comparable to normal knees. CONCLUSIONS: Subjects in this study having either a constrained or traditional insert experienced progressive rollback of both condyles, with the lateral condyle rolling more posterior than the medial condyle, leading to axial rotation. Although less in magnitude, these results were comparable to the normal knee in pattern, indicating that kinematic conflict did not occur for subjects having a constrained insert.
RESUMEN
Scanning probe lithography (SPL) as a maskless approach with a low tool price can pattern a variety of materials at a nanometer or even atomic resolution. However, the throughput of conventional SPLs is extremely low due to their limited scanning speeds. Here, we report a high-speed, probe-based method to continuously pattern the substrate surface at a linear velocity of meters per second. We demonstrated direct writings of nanoscale patterns by using ultrafast electron-induced deposition inside a nanoscale flow at a patterning frequency of 20 MHz. The fast scan motion of the writing probe is precisely controlled by using self-adaptive hydro- and aerodynamics functions of a patterning head. The microscale electro-hydrodynamic ejection and microfluid channels are used to deliver the precursor at high scanning speeds. One patterning head can carry parallel probes to further enhance the patterning throughput. This low-cost, maskless patterning method opens new avenues to develop high-throughput nanomanufacturing techniques.
Asunto(s)
Nanotecnología , Impresión , Microfluídica , Nanotecnología/métodosRESUMEN
INTRODUCTION: The effectiveness of modern ceramic bearings has been well established in reducing the osteolysis associated with wear of the bearing surfaces in total hip arthroplasty (THA). However, there are limited mid- to long-term follow-up data for complications associated with ceramic bearings. MATERIALS AND METHODS: This case series analyzed 124 consecutive primary uncemented THAs in 108 patients with a mean age of 61 years using alumina ceramic-on-alumina ceramic bearing couples. Seventy THAs (56%) were evaluated at a minimum 14 years of follow-up; the mean follow-up period was 16 ± 1 years (14-20 years). Kaplan-Meier survivorship was determined with revision surgery for any reason as the end point. Complications were recorded focusing on osteolysis, ceramic fracture, and abnormal sounds until the final follow-up. Clinical data were scored according to the Merle d'Aubigne and Postel hip score at 14 years after THA. RESULTS: The survivorship was 93.5% (95% CI 86.7-97.0%) at 14-years postoperatively. Five patients (4.0%) underwent revision surgery due to instability or infection before 1-year postoperatively. Two patients (1.6%) underwent revision surgery due to ceramic liner fracture at 9- and 12-years postoperatively, respectively. There was no radiographic evidence of osteolysis. A total of 27 complications occurred: dislocations (n = 7/124), squeaking sounds (n = 3/124), clicking sounds (n = 6/124), ceramic liner fractures (n = 2/124), periprosthetic fractures (n = 4/124), deep infections (n = 2/124), transient sciatic nerve palsy (n = 2/124), and femoral stem breakage (n = 1/124). The Merle d'Aubigne and Postel hip score was 16.8 ± 1.4 points. CONCLUSIONS: The survivorship analysis demonstrates the uncemented THA using alumina ceramic bearings may provide favorable clinical outcome and can offer minimal wear at a minimum 14-year follow-up. Revision surgery was mostly required due to instability and infection in the short-term, and implant breakage in the mid- to long-term.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Prótesis de Cadera , Osteólisis , Óxido de Aluminio , Artroplastia de Reemplazo de Cadera/efectos adversos , Cerámica , Estudios de Seguimiento , Articulación de la Cadera/cirugía , Prótesis de Cadera/efectos adversos , Humanos , Persona de Mediana Edad , Osteólisis/etiología , Diseño de Prótesis , Falla de Prótesis , Resultado del TratamientoRESUMEN
BACKGROUND: Prosthetic joint infection (PJI) is one of the most frequent and devastating causes of short-term revision total knee arthroplasty (TKA). In vitro evidence suggests ceramic surfaces demonstrate resistance to biofilm, but the clinical effect of bearing surface modifications on the risk of PJI remains unclear. This premier registry-based study examines the influence of ceramic bearing surface coatings on the outcome in cemented primary TKA. METHODS: In total, 117,660 cemented primary TKAs in patients with primary osteoarthritis recorded in the German arthroplasty registry since 2012 were followed up for a maximum of 3 years. The primary endpoint was risk of revision for PJI on ceramic coated and uncoated cobalt-chromium-molybdenum femoral components. Propensity score matching for age, gender, obesity, diabetes mellitus, depression and Elixhauser comorbidity index, and substratification on common design twins with and without coating was performed. RESULTS: In total, 4637 TKAs (85.1% female) with a ceramic-coated femoral component were identified, 42 had been revised for PJI and 122 for other reasons at 3 years. No survival advantage due to the risk of revision for PJI could be determined for ceramic-coated components. Revision for all other reasons demonstrated a significant higher rate for TKAs with ceramic-coated components. However, the results of this were confounded by a strong prevalence (20.7% vs 0.3%) of metal sensitivity in the ceramic-coated group. CONCLUSION: No evidence of reduced risk for PJI due to ceramic-coated implants in cemented primary TKA was found. Further analysis for revision reasons other than PJI is required.
Asunto(s)
Artritis Infecciosa , Artroplastia de Reemplazo de Rodilla , Infecciones Relacionadas con Prótesis , Artritis Infecciosa/cirugía , Artroplastia de Reemplazo de Rodilla/efectos adversos , Cerámica , Femenino , Humanos , Masculino , Infecciones Relacionadas con Prótesis/epidemiología , Infecciones Relacionadas con Prótesis/cirugía , ReoperaciónRESUMEN
BACKGROUND: Pitting damage on implants has been reported and attributed to the use of electrocautery. This study aimed to determine how different total knee arthroplasty bearing surfaces are susceptible to this type of damage and whether surgeons are aware that this damage can occur. METHODS: A survey was sent to Hip and Knee Society members to determine what percentage of adult reconstructive surgeons use electrocautery after implantation of components. Three bearing surfaces for total knee arthroplasty were selected: cobalt chromium, Oxinium, and zirconium nitride to be damaged by electrocautery with a monopolar (MP) and bipolar (BP) electrocautery with 3 different energy settings. A comparison of surface damage using scanning electron microscopy and elemental differences using energy dispersion spectroscopy was performed. Average roughness (Ra), maximal peak-to-valley height (Rz), kurtosis (Rk), and skewness (Rsk) were recorded for comparison using a profilometer was performed. RESULTS: Median Rz and Ra measurements were larger for BP damaged areas compared to MP for all bearing surfaces. The Oxinium surface had the greatest increase in roughness parameters. Survey results indicate that a significant percentage of adult reconstructive surgeons use the electrocautery after implants are in place and are not aware of this type of damage. Backscatter scanning electron microscopy analysis found significant changes for BP damage compared to MP. CONCLUSION: Surface damage caused by electrocautery can have significant effects on the bearing surfaces of implants but further study needs to be performed to determine if this is a clinical issue. Our survey determined that many arthroplasty experts are unaware that this damage can occur.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Prótesis de la Rodilla , Adulto , Artroplastia de Reemplazo de Rodilla/efectos adversos , Aleaciones de Cromo , Electrocoagulación/efectos adversos , Humanos , Articulación de la Rodilla/cirugía , Prótesis de la Rodilla/efectos adversos , Diseño de PrótesisRESUMEN
Unicompartmental knee arthroplasty (UKA) is a bone- and ligament-sparing alternative to total knee arthroplasty in the patients with end-stage single-compartment degeneration of the knee. Despite being a successful procedure, the multiple advantages of UKA do not correlate with its usage, most likely due to the concerns regarding prosthesis survivability, patient selection, ideal bearing design, and judicious use of advanced technology among many others. Therefore, the purpose of this study is to review and summarize the debated literature and discuss the controversies as "Ten Enigmas of UKA."
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Osteoartritis de la Rodilla/cirugía , Humanos , Prótesis de la Rodilla , Selección de Paciente , Falla de PrótesisRESUMEN
BACKGROUND: Oxidized zirconium (OxZi) is a relatively new type of material that combines the strength of a metal with the surface/wears properties of a ceramic. Our aim was to investigate whether OxZi femoral heads lead to lower polyethylene wear, higher survival rate, and better clinical outcomes than the other bearing types in patients treated with total hip arthroplasty (THA). METHODS: Two reviewers independently conducted a systematic search according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses using the MEDLINE/PubMed database and the Cochrane Database of Systematic Reviews. These databases were queried with the terms: a. "oxidized" AND "zirconium" AND "total" AND "hip" AND "arthroplasty"; b. "oxinium" AND "total" AND "hip" AND "arthroplasty". The primary outcome measures were the survival rate of the bearing surfaces as well as the polyethylene wear. RESULTS: The vast majority (85.7%) of the studies, which reported the mean polyethylene wear rate, showed that there was not any significant difference between OxZi and cobalt-chrome (CoCr) femoral heads (rate ratio: 0.836; 95% confidence interval: 0.362-1.928; P = .674). All studies comparing the survival rate of OxZi and CoCr femoral heads illustrated almost excellent survivorship with both implants. CONCLUSION: OxZi femoral heads did not lead to lower polyethylene wear rate or higher survival rate, when compared with CoCr femoral heads in patients treated with THA. On the basis of these results and taking into account the higher cost of these implants, we would not recommend the routine use of OxZi femoral heads in primary THAs. LEVEL OF EVIDENCE: Systematic review and meta-analysis of therapeutic studies I-III.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Cabeza Femoral/cirugía , Prótesis de Cadera , Diseño de Prótesis/métodos , Falla de Prótesis , Circonio/química , Cerámica , Aleaciones de Cromo , Estudios de Seguimiento , Humanos , Oxidación-Reducción , Polietileno , Factores de Tiempo , Resultado del TratamientoRESUMEN
Management of implant corrosion remains a challenge for the revision arthroplasty surgeon. Our field continues to gain insight in to how to manage this clinical scenario but there are still gaps in what is known to be considered to be the standard of care. There is a significant amount of effort going in to determining the best means of managing this issue but more work is needed. There is no doubt more studies are needed to further delineate the appropriate treatment algorithms for this clinical problem.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Cabeza Femoral/cirugía , Prótesis de Cadera/efectos adversos , Falla de Prótesis , Algoritmos , Corrosión , Femenino , Humanos , Masculino , Ensayo de Materiales , Quirófanos , Diseño de Prótesis , Reoperación , Propiedades de SuperficieRESUMEN
BACKGROUND: Wear of the bearing surface is a critical element in determining the longevity of a total hip arthroplasty (THA). Over the past decade, concerns related to modern metal-on-metal (MoM) bearings and corrosion at the femoral head-neck interface have influenced surgeon selection of bearing surfaces. The purpose of this study is to analyze trends in THA bearing surface selection from 2007 through 2014 using a large national database. METHODS: The Nationwide Inpatient Sample database was used to extract bearing surface data from patients who underwent a primary THA between 2007 and 2014. Patients were grouped by bearing surface type: metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), MoM, and ceramic-on-ceramic (CoC) bearings. Descriptive statistics were employed to describe trends. Univariate and multivariate analyses were performed to identify differences between bearing surface groups. RESULTS: During the study period, 2,460,640 THA discharges were identified, of which 1,059,825 (43.1%) had bearing surface data. A total of 496,713 (46.9%) MoP, 307,907 (29.1%) CoP, 210,381 (19.9%) MoM, and 44,823 (4.2%) CoC cases were identified. MoM utilization peaked in 2008 representing 40.1% of THAs implanted that year and steadily declined to 4.0% in 2014. From 2007 to 2014, the use of CoP bearing surfaces increased from 11.1% of cases in 2007 to 50.8% of cases in 2014. In 2014, CoP utilization surpassed MoP which represented 42.1% of bearing surfaces that year. CONCLUSION: During the study period, MoM bearing surfaces decreased precipitously, while CoP surpassed MoP as the most popular bearing surface used in a THA.
Asunto(s)
Artroplastia de Reemplazo de Cadera/instrumentación , Cerámica , Prótesis de Cadera/tendencias , Metales , Polietileno , Anciano , Artroplastia de Reemplazo de Cadera/estadística & datos numéricos , Bases de Datos Factuales , Femenino , Cabeza Femoral , Hospitales/estadística & datos numéricos , Humanos , Masculino , Persona de Mediana Edad , Análisis Multivariante , Estudios Retrospectivos , Estados UnidosRESUMEN
BACKGROUND: The purpose of this study was to determine the incidence of metal release in contemporary total knee arthroplasty and the patient-related factors associated with this release. METHODS: In total, 256 retrieved cobalt-chromium femoral components were collected through a multi-institutional orthopedic implant retrieval program (implanted: 1-15 years). Implants were mainly revised for loosening (84/256), instability (62/256), and infection (46/256). Third-body damage was assessed using a semiquantitative scoring method. Microscale electro-corrosion damage (MECD) was evaluated using digital optical microscopy. Radii of curvature were measured from representative components to calculate anterior-posterior and medial-lateral ratios. Femoral component surface roughness was measured using a white light interferometer. Using a multivariable linear model, associations between damage score, implant, and patient factors were tested. Spearman's ρ correlation tests were performed to determine the association between roughness measurements and damage score. RESULTS: Mild to severe damage was observed in 52% (134/256) of the components. In the multivariable linear model, anterior-posterior ratio (ß = -8.07; P < .001), loosening (ß = -0.52; P = .006), and patient weight (ß = 0.01; P = .007) were associated with damage score. Suspected MECD damage was observed in 82% (209/256) of components. The Ra value (ρ = 0.196; P = .002) and Rq value (ρ = 0.157; P = .012) increased as the damage score increased. CONCLUSION: The findings of this retrieval study support that similar damage mechanisms exist in contemporary and long-term total knee arthroplasty devices. Additionally, we observed associations between loosening, anterior-posterior conformity, and patient weight with increased surface damage.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/instrumentación , Aleaciones de Cromo , Prótesis de la Rodilla/estadística & datos numéricos , Adulto , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Rodilla/efectos adversos , Cromo , Cobalto , Corrosión , Femenino , Fémur/cirugía , Humanos , Prótesis de la Rodilla/efectos adversos , Masculino , Persona de Mediana Edad , Diseño de Prótesis , Falla de PrótesisRESUMEN
PURPOSE: It is unclear whether late THA periprosthetic femoral fractures are related to a mechanical mechanism that decreases strength of the femur (for example, loosening) or to a biological problem as osteolysis. It is also unknown if ceramic on ceramic bearing couples decrease the risk of late periprosthetic fractures as a result of the absence of wear and osteolysis. MATERIAL AND METHODS: We therefore asked whether the cumulative long-term fractures were different according to the couple of friction ceramic on ceramic or ceramic on polyethylene in 327 patients (654 hips) with bilateral THA (one ceramic-ceramic, and the contralateral ceramic-polyethylene) who had THA with cemented stems performed between from 1978 to 2000 for osteonecrosis. RESULTS: There were two intra-operative fractures (0.3%). The median follow-up was 22 years (range, 15-40 years), and at the most recent follow-up, the cumulative number of late (after 7 years of follow-up) post-operative fractures was 32 (5% of 654 hips). Fractures were unilateral, which means for the 327 patients, a 10% rate of fractures. Periprosthetic fractures increased in number with follow-up: seven fractures (1% of 654 hips) occurred within ten years of THA implantation, 20 (3%) within 20 years, 26 (4%) within 30 years, and 32 (5%) within 40 years. The risk of fracture was influenced (p < 0.001) by the bearing surfaces at the time of prosthetic implantation, low (0.3%) for ceramic on ceramic (1/32 fractures; 1/327 hips), high (10%) for ceramic on PE (31/32 fractures; 31/327 hips). CONCLUSION: In summary, when the contralateral hip of the same patient is the control, after 40 years of follow-up, post-operative fractures occur 30 times more often on the side with PE cup than on the side with ceramic/ceramic bearing.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Necrosis de la Cabeza Femoral/cirugía , Prótesis de Cadera/efectos adversos , Fracturas Periprotésicas/epidemiología , Diseño de Prótesis/efectos adversos , Adulto , Anciano , Artroplastia de Reemplazo de Cadera/instrumentación , Cerámica/efectos adversos , Femenino , Fémur/cirugía , Articulación de la Cadera/cirugía , Humanos , Masculino , Persona de Mediana Edad , Fracturas Periprotésicas/etiología , Polietileno/efectos adversos , Complicaciones Posoperatorias/epidemiología , Complicaciones Posoperatorias/etiología , Prevalencia , Falla de Prótesis/etiología , Estudios Retrospectivos , Factores de RiesgoRESUMEN
BACKGROUND: Larger glenosphere diameters have been used recently to increase prosthesis stability and impingement-free range of motion in reverse total shoulder arthroplasty. The goal of this study was to evaluate the rate of polyethylene wear for 32-mm and 40-mm glenospheres. METHODS: Glenospheres (32 mm and 40 mm, n = 6/group) and conventional polyethylene humeral liners underwent a 5-million cycle (MC) wear simulation protocol. Abduction-adduction and flexion-extension motion profiles were alternated every 250,000 cycles. At each interval, mass loss was determined and converted to volume loss and wear rate. At 0, 2.5 MC, and 5 MC, liners were imaged using micro-computed tomography to determine surface deviation. White light interferometry was performed on liners and glenospheres at 0 and 5 MC to quantify surface roughness. Wear particle morphology was characterized by environmental scanning electron microscopy. RESULTS: Total volume loss was significantly higher in 40-mm liners from 1.5 MC onward (P < .05). Overall, volumetric wear rate was significantly higher in 40-mm liners compared with 32-mm glenospheres (81.7 ± 23.9 mm3/MC vs. 68.0 ± 18.9 mm3/MC; P < .001). However, micro-computed tomography surface deviation results demonstrated increased linear penetration on 32-mm glenospheres compared with 40-mm glenospheres (0.36 ± 0.03 µm vs. 0.28 ± 0.01 µm; P = .002). Surface roughness measurements showed no difference for liners; however, increased roughness was noted for 40-mm glenospheres at 5 MC compared with 32 mm (P < .05). CONCLUSION: Larger glenospheres underwent significantly greater polyethylene volume loss and volumetric wear rates, whereas smaller glenospheres underwent greater polyethylene surface deviations. The enhanced stability provided by larger glenospheres must be weighed against the potential for increased polyethylene wear.
Asunto(s)
Artroplastía de Reemplazo de Hombro , Ensayo de Materiales , Diseño de Prótesis , Falla de Prótesis , Prótesis de Hombro , Simulación por Computador , Análisis de Falla de Equipo , Humanos , Imagenología Tridimensional , Polietileno , Microtomografía por Rayos XRESUMEN
BACKGROUND: Bearing surface issues related to trunnionosis or metal-on-metal (MoM) articulations have likely impacted recent trends in bearing surface choice. The purpose of this study is to evaluate trends in total hip arthroplasty (THA) bearing surface use, including 2015 data, with respect to the date of operation and patient demographics. METHODS: The Humana dataset was reviewed from 2007 through 2015 to analyze bearing surface usage in primary THA. Four bearing surface types were identified by International Classification of Disease, 10th Revision codes and trended throughout the years: metal-on-polyethylene (MoP), ceramic-on-ceramic (CoC), ceramic-on-polyethylene (CoP), and MoM. Prevalence was analyzed as a function of age and sex. RESULTS: Of the 28,504 primary THA procedures, the most commonly used bearing was MoP (46.1%), followed by CoP (33.2%), MoM (17.1%), and ceramic-on-ceramic (3.6%). The use of CoP bearings significantly increased from 6.4% in 2007 to 52.0% in 2015, while MoM bearings decreased during this period. MoP bearings decreased over 2012-2015 (P < .001). CoP usage decreased with age, while MoP bearings increased with a transition occurring at 65-69 years of age. Women were more likely to receive MoP bearings (odds ratio [OR] 1.2), while men were more likely to receive MoM and CoP bearings (OR 1.1). Multivariate logistic regression showed age to be an independent predictor of bearing surface choice with patients 65 and older more likely to receive MoP bearings (OR 3.2). CONCLUSION: Bearing surface choice in primary THA has changed tremendously from 2007 to 2015. MoM bearing use has decreased as a result of adverse effects. Age continues to remain a significant factor in bearing surface choice.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Artroplastia de Reemplazo de Cadera/tendencias , Prótesis de Cadera , Diseño de Prótesis , Reoperación , Anciano , Cerámica , Estudios de Cohortes , Bases de Datos Factuales , Femenino , Humanos , Modelos Logísticos , Masculino , Metales , Persona de Mediana Edad , Oportunidad Relativa , Polietileno , Análisis de Regresión , Factores de Riesgo , Propiedades de SuperficieRESUMEN
BACKGROUND: Dislocation is a leading cause of revision after primary total hip arthroplasty (THA). Although more common in the first few years after the procedure, dislocation can occur at any time. This study investigated the difference in late dislocation in ceramic-on-ceramic (CoC) bearings compared with metal-on-polyethylene and ceramic-on-polyethylene bearings in THA. METHODS: Data were used from the Australian Orthopaedic Association National Joint Replacement Registry, and the cumulative percent revision for dislocation was estimated using the Kaplan-Meier method for the different bearing surfaces. There were 192,275 THAs included in the study with 101,915 metal-on-cross-linked polyethylene (MoXLPE), 30,256 ceramic-on-cross-linked polyethylene (CoXLPE), and 60,104 CoC. RESULTS: The cumulative percent revision for dislocation at 13 years for MoXLPE, CoXLPE, and CoC groups was 1.2 (95% confidence interval [CI], 1.1-1.3), 1.0 (95% CI, 0.7-1.4), and 0.9 (95% CI, 0.8-1.1), respectively. There was an increased risk of revision for dislocation for MoXLPE compared with CoXLPE and CoC. When stratified for head size, there was no difference in the risk of revision for dislocation between MoXLPE, CoXLPE, and CoC in the 28- and 32-mm head sizes. With a head size of 36 mm, MoXLPE had a higher rate of dislocation compared with other materials. CONCLUSION: Bearing surface has little impact on revision for dislocation.
Asunto(s)
Artroplastia de Reemplazo de Cadera/efectos adversos , Luxación de la Cadera/etiología , Prótesis de Cadera/efectos adversos , Materiales Biocompatibles , Cerámica , Humanos , Masculino , Metales , Polietileno , Diseño de Prótesis/efectos adversos , Falla de Prótesis , Sistema de Registros , ReoperaciónRESUMEN
BACKGROUND: The ideal bearing surface for primary total hip arthroplasty (THA) in young patients remains a debate. Data on recent national trends are lacking. The purpose of this study is to provide an analysis on the national epidemiologic trends of bearing surface usage in patients aged ≤30 years undergoing THA from 2009 through 2012. METHODS: Using the Healthcare Cost and Utilization Project Nationwide Inpatient Sample from 2009 to 2012, 9265 THA discharges (4210 coded by bearing surface) were identified in patients aged ≤30 years. Prevalence of surface type was analyzed along with patient and hospital demographic data. Statistical analysis was performed using SAS (SAS version 9.1; SAS, Inc, Cary, NC). Significance was set at P < .05. RESULTS: Ceramic-on-polyethylene (CoP) bearing surfaces were most commonly used, representing 35.6% of cases, followed by metal-on-polyethylene (MoP; 28.0%), metal-on-metal (MoM; 19.3%), and ceramic-on-ceramic (CoC; 17.0%) bearing surfaces. Hard-on-hard bearing surfaces (MoM and CoC) represented only 36.4% of cases, a significant decrease from previously reported findings (2006-2009) where hard-on-hard bearing surfaces were the majority (62.2%; P < .05). Hard-on-hard bearing surface usage decreased from 2009 to 2012 (MoM: 29.7% to 10.2%; CoC: 20.0% to 14.7%), whereas hard-on-soft bearing surface usage (MoP and CoP) increased. CoP bearing surfaces saw the most significant increase from 25.7% in 2009 to 48.2% in 2012. A cost analysis revealed that CoP discharges were associated with higher hospital charges than other surface types, with an average charge of $66,457 (P < .05). CONCLUSION: Use of hard-on-hard surfaces has decreased significantly in this population, whereas CoP and MoP surfaces have become increasingly common. Determining the optimal bearing surface for extremely young patients continues to be a challenge for orthopedic surgeons as they weigh the risks and benefits of each.
Asunto(s)
Artroplastia de Reemplazo de Cadera/tendencias , Prótesis de Cadera/estadística & datos numéricos , Diseño de Prótesis/métodos , Adolescente , Adulto , Anciano , Artroplastia de Reemplazo de Cadera/economía , Cerámica/química , Costos y Análisis de Costo , Recolección de Datos , Femenino , Costos de la Atención en Salud , Prótesis de Cadera/economía , Hospitales , Humanos , Tiempo de Internación , Masculino , Metales/química , Persona de Mediana Edad , Alta del Paciente , Polietileno , Falla de Prótesis , Propiedades de Superficie , Estados Unidos , Adulto JovenRESUMEN
Polyethylene liner fracture is a risk associated with the use of highly cross-linked UHMWPE. We performed a review of the voluntary reports of fractured liners to the US Food and Drug Administration to determine if any risk factors could be identified. There have been 74 reports of fractured Trilogy, Longevity liners to the US Food and Drug Administration since 1999. Most cases utilized small acetabular shells (≤54 mm) combined with large diameter heads (≥36 mm). Liners less than 7 mm thick at the weight bearing or 4.8 mm thick at the rim should be used with caution. At revision surgery, malpositioned shells should be revised and the use of a thin liner should be avoided.
Asunto(s)
Acetábulo/cirugía , Artroplastia de Reemplazo de Cadera/instrumentación , Materiales Biocompatibles/efectos adversos , Prótesis de Cadera/efectos adversos , Polietilenos/efectos adversos , Falla de Prótesis , Artroplastia de Reemplazo de Cadera/efectos adversos , Bases de Datos Factuales , Humanos , Diseño de Prótesis , Reoperación , Estados Unidos , United States Food and Drug AdministrationRESUMEN
Results of cementless THA for osteonecrosis were evaluated at a minimum of 10-year follow-up and compared to our previous report of cemented THA for osteonecrosis. Eighty cementless THAs in 66 patients with osteonecrosis were followed for a minimum of 10 years. Evaluation consisted of need for revision; radiographic evidence of loosening, wear and osteolysis; activity monitoring with an accelerometer; UCLA, Tegner, WOMAC, and Harris hip scores. Results were compared to 48 cemented THAs performed for osteonecrosis with comparable follow-up. At a minimum of 10 years, 10 hips required reoperation. Loosening and revision for loosening were significantly lower in the cementless group compared to the cemented historical control. Cementless fixation in THAs for osteonecrosis demonstrated durable results with bearing surface wear being the major long-term problem.