Triple Cross-Linking Engineering Strategies for Efficient and Stable Inverted Flexible Perovskite Solar Cells.

Inverted flexible perovskite solar cells (fPSCs) are promising for commercialization due to their low cost, lightweight, and excellent stability. However, enhancing fPSCs' power conversion efficiency and stability remains challenging. Here, an unprecedented triple cross-linking engineering strategy is innovatively exhibit for efficient and stable inverted fPSCs. First, a carefully designed cross-linker, 4-fluorophenyl 5-(1,2-dithiolan-3-yl) pentanoate (FB-TA), is added to the perovskite precursor solution. During the perovskite film's crystallization at a low temperature, the cross-linking product of FB-TA can passivate the grain boundaries and reduce the film's residual strain and Young's module. Then, FB-TA is also introduced for the bottom- and top-interface modification of the perovskite film. The interfacial treating strategy protects the perovskite from water invasion and strengthens the interfaces. The combination of triple strategies affords highly efficient inverted fPSCs with a champion efficiency of 21.42% among the state-of-the-art inverted fPSCs based on nickel oxides. More importantly, the flexible devices also exhibit superior stabilities with T90 >4000 bending cycles, photostability with T90 >568 h, and ambient stability with T90 >2000 h, especially the stability with T80 >1120 h under harsh damp-heat conditions (i.e., 85 °C and 85% RH). The strategy provides new insights into the industrialization of high-performance and stable fPSCs.

Supramolecular Polyurethane "Ligaments" Enabling Room-Temperature Self-Healing Flexible Perovskite Solar Cells and Mini-Modules.

Flexible perovskite solar cells (F-PSCs) have emerged as promising alternatives to conventional silicon solar cells for applications in portable and wearable electronics. However, the mechanical stability of inherently brittle perovskite, due to residual lattice stress and ductile fracture formation, poses significant challenges to the long-term photovoltaic performance and device lifetime. In this paper, to address this issue, a dynamic "ligament" composed of supramolecular poly(dimethylsiloxane) polyurethane (DSSP-PPU) is introduced into the grain boundaries of the PSCs, facilitating the release of residual stress and softening of the grain boundaries. Remarkably, this dynamic "ligament" exhibits excellent self-healing properties and enables the healing of cracks in perovskite films at room temperature. The obtained PSCs have achieved power conversion efficiencies of 23.73% and 22.24% for rigid substrates and flexible substrates, respectively, also 17.32% for flexible mini-modules. Notably, the F-PSCs retain nearly 80% of their initial efficiency even after subjecting the F-PSCs to 8000 bending cycles (r = 2 mm), which can further recover to almost 90% of the initial efficiency through the self-healing process. This remarkable improvement in device stability and longevity holds great promise for extending the overall lifetime of F-PSCs.

Chemical bath deposition of SnO2films on PEN/ITO substrates for efficient flexible perovskite solar cells.

Flexible perovskite solar cells (f-PSCs) have achieved significant success. However, high-quality tin dioxide (SnO2) electron transport layers (ETLs) fabricated via chemical bath deposition (CBD) have not been achieved on flexible PEN/ITO substrates. This limitation is primarily due to the corrosion of the poor-quality ITO layer by the strongly acidic CBD solution. Here, we analyzed the reasons for the poor corrosion resistance of ITO films on PEN substrate from multiple perspectives, such as element composition, microstructure, and crystallinity. Then, we proposed a modified CBD method for SnO2films suitable for flexible PEN/ITO substrates. We employed SnCl2·2H2O as the tin source and regulated the pH of the CBD solution by NH3·H2O, which effectively avoided the corrosion of the ITO layer by the CBD solution and achieved high-quality SnO2films on the ITO layers. Compared to the commercial SnO2dispersion, the SnO2films prepared by this method have smaller grains and higher transmittance. As a result, we achieved an unprecedented power conversion efficiency (PCE) of 20.71% for f-PSCs fabricated on PEN/ITO substrates with SnO2ETLs by CBD method. This breakthrough facilitates the development of high-performance f-PSCs by a low-cost and large-scale chemical bath deposition of high-quality ETLs on flexible substrates.

Transfer-Imprinting-Assisted Growth of 2D/3D Perovskite Heterojunction for Efficient and Stable Flexible Inverted Perovskite Solar Cells.

2D/3D perovskite heterostructures show great potential to boost efficiency and stability of perovskite solar cells (PSCs). Here, a solvent-free transfer-imprinting-assisted growth (TIAG) method is employed to in situ grow 2D/3D perovskite heterojunctions. The solid-state transfer of spacer cation by the TIAG process enables a spatially confined growth of the 2D perovskite interlayer with uniform morphology between the 3D perovskites and charge transport layer. Meanwhile, the pressure associated with the TIAG process promotes the crystalline orientation, which is beneficial to carrier transport. As a result, the inverted PSC achieved a PCE of 23.09% (with certified 22.93%) and maintained 90% of their initial PCE after aging at 85 °C for 1200 h or operating for 1100 h under continuous AM 1.5 illumination. Flexible inverted PSCs achieved a PCE of 21.14% with mechanical robustness by maintaining above 80% of their initial PCE after 10000 bending cycles under a 3 mm bending radius.

Buried Interface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Mechanical Stability.

The power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs) are significantly reduced by defect-induced charge non-radiative recombination. Also, unexpected residual strain in perovskite films leads to an unfavorable impact on the stability and efficiency of PSCs, notably flexible PSCs (f-PSCs). Considering these problems, a thorough and effective strategy is proposed by incorporating phytic acid (PA) into SnO2 as an electron transport layer (ETL). With the addition of PA, the Sn inherent dangling bonds are passivated effectively and thus enhance the conductivity and electron mobility of SnO2 ETL. Meanwhile, the crystallization quality of perovskite is increased largely. Therefore, the interface/bulk defects are reduced. Besides, the residual strain of perovskite film is significantly reduced and the energy level alignment at the SnO2 /perovskite interface becomes more matched. As a result, the champion f-PSC obtains a PCE of 21.08% and rigid PSC obtains a PCE of 21.82%, obviously surpassing the PCE of 18.82% and 19.66% of the corresponding control devices. Notably, the optimized f-PSCs exhibit outstanding mechanical durability, after 5000 cycles of bending with a 5 mm bending radius, the SnO2 -PA-based device preserves 80% of the initial PCE, while the SnO2 -based device only remains 49% of the initial value.

Creating a Dual-Functional 2D Perovskite Layer at the Interface to Enhance the Performance of Flexible Perovskite Solar Cells.

Flexible perovskite solar cells (f-PSCs) have been attracting tremendous attention due to their potentially commercial prospects in flexible energy system and mobile energy system. Reducing the energy barriers and charge extraction losses at the interfaces between perovskite and charge transport layers is essential to improve both efficiency and stability of f-PSCs. Herein, 4-trifluoromethylphenylethylamine iodide (CF3 PEAI) is introduced to form a 2D perovskite at the interface between perovskite and hole transport layer (HTL). It is found that the 2D perovskite plays a dual-functional role in aligning energy band between perovskite and HTL and passivating the traps in the 3D perovskite, thus reducing energy loss and charge carrier recombination at the interface, facilitating the hole transfer from perovskite to the Spiro-OMeTAD. Consequently, the photovoltaic performance of f-PSCs is significantly improved, leading to a power conversion efficiency (PCE) of 21.1% and a certified PCE of 20.5%. Furthermore, the long-term stability of f-PSCs is greatly improved through the protection of 2D perovskite layer to the underlying 3D perovskite. This work provides an excellent strategy to produce efficient and stable f-PSCs, which will accelerate their potential applications.

Fabrication of Nickel Oxide Nanopillar Arrays on Flexible Electrodes for Highly Efficient Perovskite Solar Cells.

Semiconductor nanomaterials with controlled morphologies and architectures are of critical importance for high-performance optoelectronic devices. However, the fabrication of such nanomaterials on polymer-based flexible electrodes is particularly challenging due to degradation of the flexible electrodes at a high temperature. Here we report the fabrication of nickel oxide nanopillar arrays (NiO x NaPAs) on a flexible electrode by vapor deposition, which enables highly efficient perovskite solar cells (PSCs). The NiO x NaPAs exhibit an enhanced light transmittance for light harvesting, prohibit exciton recombination, promote irradiation-generated hole transport and collection, and facilitate the formation of large perovskite grains. These advantageous features result in a high efficiency of 20% and 17% for the rigid and flexible PSCs, respectively. Additionally, the NaPAs show no cracking after 500 times of bending, consistent with the mechanic simulation results. This robust fabrication opens a new opportunity for the fabrication of a large area of high-performance flexible optoelectronic devices.

Impact of Perovskite Composition on Film Formation Quality and Photophysical Properties for Flexible Perovskite Solar Cells.

In recent years, flexible perovskite solar cells have drawn tremendous attention in the field of wearable devices, and optimization of perovskite composition plays an important role in improving film quality and photophysical properties. At present, some researchers have only studied A-site organic cations mixing or X-site halide anions mixing in the ABX3 structure of perovskite, but there are few reports on co-mixing of A-site and X-site ions in flexible perovskite solar cells. In this paper, we mainly try to study the effects of different concentrations of mixed formamidine methylamine halide (FAxMA1-xBrxClyI1-x-y) precursor solutions on the quality and photophysical properties of perovskite films under low temperature process. We conclude that the film quality and photophysical properties reached the best results when the optimized precursor solution concentration was 60:6:6. The investigation on composition optimization in this experiment laid the foundation for the improvement of the performance of flexible perovskite solar cells. We also use the results of this experiment to prepare flexible perovskite solar cells based on carbon electrodes, which are expected to be applied in other flexible optoelectronic or electro-optical devices.

Flexible Indoor Perovskite Solar Cells by In Situ Bottom-Up Crystallization Modulation and Interfacial Passivation.

A robust perovskite-buried interface is pivotal for achieving high-performance flexible indoor photovoltaics as it significantly influences charge transport and extraction efficiency. Herein, a molecular bridge strategy is introduced utilizing sodium 2-cyanoacetate (SZC) additive at the perovskite-buried interface to simultaneously achieve in situ passivation of interfacial defects and bottom-up crystallization modulation, resulting in high-performance flexible indoor photovoltaic applications. Supported by both theoretical calculations and experimental evidences, it illustrates how SZCs serve as molecular bridges, establishing robust bonds between SnO2 transport layer and perovskite, mitigating oxygen vacancy defects and under-coordinated Pb defects at interface during flexible fabrication. This, in turn, enhances interfacial energy level alignment and facilitates efficient carrier transport. Moreover, this in situ investigation of perovskite crystallization dynamics reveals bottom-up crystallization modulation, extending perovskite growth at the buried interface and influencing subsequent surface recrystallization. This results in larger crystalline grains and improved lattice strain of the perovskite during flexible fabrication. Finally, the optimized flexible solar cells achieve an impressive efficiency exceeding 41% at 1000 lux, with a fill factor as high as 84.32%. The concept of the molecular bridge represents a significant advancement in enhancing the performance of perovskite-based flexible indoor photovoltaics for the upcoming era of Internet of Things (IoT).

Stereoscopic Polymer Network for Developing Mechanically Robust Flexible Perovskite Solar Cells with an Efficiency Approaching 25.

Flexible perovskite solar cells (pero-SCs) have the potential to overturn the application scenario of silicon photovoltaic technology. However, their mechanical instability severely impedes their practical applicability, and the corresponding intrinsic degradation mechanism remains unclear. In this study, the degradation behavior of flexible pero-SCs is systematically analyzed under mechanical stress and it is observed that the structural failure first occurs in the polycrystal perovskite film, then extend to interfaces. To suppress the structural failure, pentaerythritol triacrylate, a crosslinked molecule with three stereoscopic crosslink sites, is employed to establish a 3D polymer network in both the interface and bulk perovskite. This network reduced the Young's modulus of the perovskite and simultaneously enhanced the interfacial toughness. As a result, the formation of cracks and delamination, which occur under a high mechanical stress, is significantly suppressed in the flexible pero-SC, which consequently retained 92% of its initial power conversion efficiency (PCE) after 20 000 bending cycles. Notably, the flexible device also shows a record PCE of 24.9% (certified 24.48%).

One-Stone-for-Two-Birds Method to Improve the SnO2 Layers for High Power-per-Weight Flexible Perovskite Solar Cell Mini-modules.

Maintaining the power conversion efficiency (PCE) of flexible perovskite solar cells (fPSCs) while decreasing their weight is essential to utilize their lightweight and flexibility as much as possible for commercialization. Strengthening the interfaces between functional layers, such as flexible substrates, charge transport layers, and perovskite active layers, is critical to addressing the issue. Herein, we propose a feasible and one-stone-for-two-birds method to improve the electron transport layer (ETL), SnO2, and the interface between the ETL and perovskite layer simultaneously. In detail, poly(acrylate ammonium) (PAAm), a low-cost polymer with a long chain structure, is added into the SnO2 aqueous solution to reduce the aggregation of SnO2 nanoparticles, resulting in the deposition of a conformal and high-quality ETL film on the tin-doped indium oxide film surface. Simultaneously, PAAm addition can effectively regulate the crystallization of the perovskite films, strengthening the interface between the SnO2 film and the buried surface of the perovskite layer. The outstanding PCEs of 22.41% on small-scale fPSCs and 18.54% on fPSC mini-modules are among the state-of-the-art n-i-p type fPSCs. Moreover, the fPSC mini-module on the 20 µm-thick flexible substrate shows a comparable PCE with that of the fPSC mini-module on the 125 µm-thick flexible substrate, exhibiting a high power-to-weight of 5.097 W/g. This work provides an easy but essential direction for further applications of fPSCs in diverse scenarios.

Large Orientation Angle Buried Substrate Enables Efficient Flexible Perovskite Solar Cells and Modules.

Flexible perovskite solar cells (f-PSCs) have emerged as potential candidates for specific mechanical applications owing to their high foldability, efficiency, and portability. However, the power conversion efficiency (PCE) of f-PSC remains limited by the inferior contact between perovskite and flexible buried substrate. Here, an asymmetric π-extended self-assembled monolayer (SAM) (4-(9H-dibenzo[a,c]carbazol-9-yl)butyl)phosphonic acid (A-4PADCB) is reported as a buried substrate for efficient inverted f-PSCs. Employing this design strategy, A-4PADCB exhibits a significant orientation angle away from the surface normal, homogenizing the distribution of contact potentials. This enhancement improves the SAM/perovskite interface quality, controlling the growth of favorable perovskite films with low defect density and slight tensile stress. Integration of A-4PADCB into small-area f-PSCs and large-area flexible perovskite solar modules with an aperture area of 20.84 cm2 achieves impressive PCEs of up to 25.05% and 20.64% (certified 19.51%), respectively. Moreover, these optimized A-4PADCB-based f-PSCs possess enhanced light, thermal, and mechanical stability. This research paves a promising avenue toward the design of SAM-buried substrates with a large orientation angle, regulating perovskite growth, and promoting the commercialization of large-area flexible perovskite photovoltaics.

Material and Device Design of Flexible Perovskite Solar Cells for Next-Generation Power Supplies.

This review outlines the rapid evolution of flexible perovskite solar cells (f-PSCs) to address the urgent need for alternative energy sources, highlighting their impressive power conversion efficiency, which increases from 2.62% to over 24% within a decade. The unique optoelectronic properties of perovskite materials and their inherent mechanical flexibilities instrumental in the development of f-PSCs are examined. Various strategies proposed for material modification and device optimization significantly enhance efficiency and bending durability. The transition from small-scale devices to large-area photovoltaic modules for diverse applications is discussed in addition to the challenges and innovative solutions related to film uniformity and environmental stability. This review provides succinct yet comprehensive insights into the development of f-PSCs, paving the way for their integration into various applications and highlighting their potential in the renewable energy landscape.

Multicoated Flexible Indium Tin Oxide Electrodes Fabricated Using Magnetron Sputtering and Arc Plasma Ion Plating for Flexible Perovskite Solar Cells.

High-performance flexible Sn-doped In2O3 (indium tin oxide, ITO) electrodes were fabricated using a multicoating process on colorless polyimide (CPI) substrates for flexible perovskite solar cells (FPSCs). The effects of different coating sequences on the electrical, optical, and mechanical properties of the flexible ITO electrodes were thoroughly investigated after preparing them with direct-current magnetron sputtering (DMS) and arc plasma ion plating (APIP). Although both the sputtered ITO (SITO)/arc ion-plated ITO (AITO) film and the AITO/SITO film showed similarly low sheet resistance (18.69-25.29 Ω/sq) and high optical transmittance (94.96-96.85%), the coating sequence significantly affected the mechanical flexibility of the multicoated ITO films. The 120 nm-thick SITO/AITO electrode exhibited small outer and inner critical bending radii (3 mm and 3 mm, respectively) compared to the AITO/SITO electrode (4 and 5 mm, respectively). Owing to better adhesion of the arc-ion-plated ITO bottom layer and the amorphous structure of the top SITO layer, the SITO/AITO electrode exhibited excellent mechanical flexibility and durability. In addition, an FPSC using the SITO/AITO electrode achieved a higher power conversion efficiency (15.09%) than that with the AITO/SITO electrode (13.22%). This improvement was attributed to its high transmittance, low sheet resistance, smooth surface morphology, and enhanced hole collection efficiency. These findings highlight the efficacy of the combined DMS and APIP multicoating process for fabricating high-quality flexible ITO electrodes for high-performance FPSCs.

Flexible, Transparent, and Bifacial Perovskite Solar Cells and Modules Using the Wide-Band Gap FAPbBr3 Perovskite Absorber.

Perovskite solar cells (PSCs) offer impressive performance and flexibility, thanks to their simple, low-temperature deposition methods. Their band gap tunability allows for a wide range of applications, transitioning from opaque to transparent devices. This study introduces the first flexible, bifacial PSCs using the FAPbBr3 perovskite. We investigated the impact of optimizing electron and hole transport layers on the cells' bifaciality, transparency, and stability. PSCs achieved a maximum power conversion efficiency (PCE) of 6.8 and 18.7% under 1 sun and indoor light conditions (1200 lx), respectively, showing up to 98% bifaciality factor and an average visible transmittance (AVT) of 55%. Additionally, a P1-P2-P3 laser ablation scheme has been developed on the flexible poly(ethylene terephthalate) (PET) substrate for perovskite solar modules showing a PCE of 4.8% and high geometrical fill factor (97.8%). These findings highlight the potential of flexible, bifacial PSCs for diverse applications such as building-integrated photovoltaics (BIPV), agrivoltaics, automotive technology, wearable sensors, and Internet of things (IoT).

Strain Effects on Flexible Perovskite Solar Cells.

Flexible perovskite solar cells (f-PSCs) as a promising power source have grabbed surging attention from academia and industry specialists by integrating with different wearable and portable electronics. With the development of low-temperature solution preparation technology and the application of different engineering strategies, the power conversion efficiency of f-PSCs has approached 24%. Due to the inherent properties and application scenarios of f-PSCs, the study of strain in these devices is recognized as one of the key factors in obtaining ideal devices and promoting commercialization. The strains mainly from the change of bond and lattice volume can promote phase transformation, induce decomposition of perovskite film, decrease mechanical stability, etc. However, the effect of strain on the performance of f-PSCs has not been systematically summarized yet. Herein, the sources of strain, evaluation methods, impacts on f-PSCs, and the engineering strategies to modulate strain are summarized. Furthermore, the problems and future challenges in this regard are raised, and solutions and outlooks are offered. This review is dedicated to summarizing and enhancing the research into the strain of f-PSCs to provide some new insights that can further improve the optoelectronic performance and stability of flexible devices.

Digital Twin Modeling of Flexible Perovskite Nano-Films with In-Situ Mechanical Microscopy Validation.

Flexible perovskite solar cells introduce opportunities for high throughput, high specific weight, and short energy payback time photovoltaics. However, they require additional investigation into their mechanical resiliency. This work investigates the mechanical properties and behaviors of perovskite thin films and builds a robust model for future research. A two-pronged approach was utilized. Perovskite thin films were flexed in a three-point bend mode with in-situ SEM. Novel insights into the perovskite mechanical behaviors with varying substrate layers were gained. Modeling and validation, the second prong, was completed with finite element analysis. Model coupons of the imaged perovskite architectures were built, with sensitivity analysis completed to provide mechanical property estimates. The results demonstrate that mechanical degradation of perovskite thin films on polyethylene terephthalate (PET) primarily presents as a crack in the grain boundaries between crystals. Perovskite thin films on Indium Tin Oxide (ITO) and PET primarily crack in a periodic pattern regardless of the placement of perovskite crystals.

Perovskite Grain-Boundary Manipulation Using Room-Temperature Dynamic Self-Healing "Ligaments" for Developing Highly Stable Flexible Perovskite Solar Cells with 23.8% Efficiency.

Flexible perovskite solar cells (pero-SCs) are the best candidates to complement traditional silicon SCs in portable power applications. However, their mechanical, operational, and ambient stabilities are still unable to meet the practical demands because of the natural brittleness, residual tensile strain, and high defect density along the perovskite grain boundaries. To overcome these issues, a cross-linkable monomer TA-NI with dynamic covalent disulfide bonds, H-bonds, and ammonium is carefully developed. The cross-linking acts as "ligaments" attached on the perovskite grain boundaries. These "ligaments" consisting of elastomers and 1D perovskites can not only passivate the grain boundaries and enhance moisture resistance but also release the residual tensile strain and mechanical stress in 3D perovskite films. More importantly, the elastomer can repair bending-induced mechanical cracks in the perovskite film because of dynamic self-healing characteristics. The resultant flexible pero-SCs exhibit promising improvements in efficiency, and record values (23.84% and 21.66%) are obtained for 0.062 and 1.004 cm2  devices; the flexible devices also show overall improved stabilities with T90  >20 000 bending cycles, operational stability with T90  >1248 h, and ambient stability (relative humidity = 30%) with T90  >3000 h. This strategy paves a new way for the industrial-scale development of high-performance flexible pero-SCs.

Multifunctional Additive CdAc2 for Efficient Perovskite-Based Solar Cells.

Polycrystalline perovskite films fabricated on flexible and textured substrates often are highly defective, leading to poor performance of perovskite devices. Finding substrate-tolerant perovskite fabrication strategies is therefore paramount. Herein, this study shows that adding a small amount of Cadmium Acetate (CdAc2 ) in the PbI2 precursor solution results in nano-hole array films and improves the diffusion of organic salts in PbI2 and promotes favorable crystal orientation and suppresses non-radiative recombination. Polycrystalline perovskite films on the flexible substrate with ultra-long carrier lifetimes exceeding 6 µs are achieved. Eventually, a power conversion efficiency (PCE) of 22.78% is obtained for single-junction flexible perovskite solar cells (FPSCs). Furthermore, it is found that the strategy is also applicable for textured tandem solar cells. A champion PCE of 29.25% (0.5003 cm2 ) is demonstrated for perovskite/silicon tandem solar cells (TSCs) with CdAc2 . Moreover, the un-encapsulated TSCs maintains 109.78% of its initial efficiency after 300 h operational at 45 °C in a  nitrogen atmosphere. This study provides a facile strategy for achieving high-efficiency perovskite-based solar cells.

A 0D Additive for Flexible All-Inorganic Perovskite Solar Cells to Go Beyond 60 000 Flexible Cycles.

All-inorganic cesium lead halide flexible perovskite solar cells (f-PSCs) exhibit superior thermal stability compared to their organic-inorganic hybrid counterparts. However, their flexibility and efficiency are still below-par for practical viability. Herein, a design using a 0D Cs4 Pb(IBr)6 additive to transform tensile stress into compressive stress in the perovskite film, effectively preventing expansion of cracks for significantly improved mechanical durability, is reported. It is found that not only is improved flexibility obtained, but also the cell efficiency is increased for the all-inorganic flexible 3D CsPbI3- x Brx solar cells. The CsPbI2.81 Br0.19 f-PSC retains over 97% of its initial efficiency even after 60 000 flexing cycles at a curvature radius of 5 mm (R = 5 mm). Simultaneously, 0D Cs4 Pb(IBr)6 enhances the crystallinity of the CsPbI2.81 Br0.19 film and passivates the defects along the grain boundaries, effectively improving the photovoltaic performance of the all-inorganic f-PSCs. The highest power-conversion efficiency obtained is 14.25% with a short-circuit current density of 18.47 mA cm-2 , open-circuit voltage of 1.09 V, and fill factor of 70.67%. This strategy paves the way for further improvement of the mechanical durability of all-inorganic f-PSCs.