RESUMEN
Acoustic microfluidic devices have advantages for diagnostic applications, therapeutic solutions, and fundamental research due to their contactless operation, simple design, and biocompatibility. However, most acoustofluidic approaches are limited to forming simple and fixed acoustic patterns, or have limited resolution. In this study,a detachable microfluidic device is demonstrated employing miniature acoustic holograms to create reconfigurable, flexible, and high-resolution acoustic fields in microfluidic channels, where the introduction of a solid coupling layer makes these holograms easy to fabricate and integrate. The application of this method to generate flexible acoustic fields, including shapes, characters, and arbitrarily rotated patterns, within microfluidic channels, is demonstrated.
RESUMEN
Electrohydrodynamic wetting manipulation plays a major role in modern microfluidic technologies such as lab-on-a-chip applications and digital microfluidics. Liquid dielectrophoresis (LDEP) is a common driving mechanism, which induces hydrodynamic motion in liquids by the application of nonhomogeneous electrical fields. Among strategies to analyze droplet movement, systematic research on the influence of different frequencies under AC voltage is missing. In this paper, we therefore present a first study covering the motion characteristics of LDEP-driven droplets of the dielectric liquids ethylene glycol and glycerol carbonate in the driving voltage frequency range from 50 Hz to 1600 Hz. A correlation between the switching speed of LDEP-actuated droplets in a planar electrode configuration and the frequency of the applied voltage is shown. Hereby, motion times of different-sized droplets could be reduced by up to a factor of 5.3. A possible excitation of the droplets within their range of eigenfrequencies is investigated using numerical calculations. The featured fluidic device is designed using larger-sized electrodes rather than typical finger or strip electrodes, which are commonly employed in LDEP devices. The influence of the electrode shape is considered simulatively by studying the electric field gradients.
RESUMEN
Multifunctional micro-/nanomaterials featuring functional superiority and high value-added physicochemical nature have received immense attention in electrochemical energy storage. Microfluidic synthesis has become an emergent technology for massively producing multifunctional micro-/nanomaterials with tunable microstructure and morphology due to its rapid mass/heat transfer and precise fluid controllability. In this review, the latest progresses and achievements in microfluidic-synthesized multifunctional micro-/nanomaterials are summarized via reaction process intensification, multifunctional micro-/nanostructural engineering and electrochemical energy storage applications. The reaction process intensification mechanisms of various micro-/nanomaterials, including quantum dots (QDs), metal materials, conducting polymers, metallic oxides, polyanionic compounds, metal-organic frameworks (MOFs) and two-dimensional (2D) materials, are discussed. Especially, the multifunctional structural engineering principles of as-fabricated micro-/nanomaterials, such as vertically aligned structure, heterostructure, core-shell structure, and tunable microsphere, are introduced. Subsequently, the electrochemical energy storage application of as-prepared multifunctional micro-/nanomaterials is clarified in supercapacitors, lithium-ion batteries, sodium-ion batteries, all-vanadium redox flow batteries, and dielectric capacitors. Finally, the current problems and future forecasts are illustrated.
RESUMEN
Microfluidic devices have revolutionized the field of lab-on-a-chip by enabling precise manipulation of small fluid volumes for various biomedical applications. However, most existing microfluidic pumps struggle to handle high-viscosity fluids, limiting their applicability in certain areas that involve bioanalysis and on-chip sample processing. In this paper, the design and fabrication of a miniaturized Archimedean screw pump for pumping high-viscosity fluids within microfluidic channels are presented. The pump was 3D-printed and operated vertically, allowing for continuous and directional fluid pumping. The pump's capabilities were demonstrated by successfully pumping polyethylene glycol (PEG) solutions that are over 100 times more viscous than water using a basic mini-DC motor. Efficient fluid manipulation at low voltages was achieved by the pump, making it suitable for point-of-care and field applications. The flow rates of water were characterized, and the effect of different screw pitch lengths on the flow rate was investigated. Additionally, the pump's capacity for pumping high-viscosity fluids was demonstrated by testing it with PEG solutions of increasing viscosity. The microfluidic pump's simple fabrication and easy operation position it as a promising candidate for lab-on-a-chip applications involving high-viscosity fluids.
RESUMEN
Inertial microfluidics enables fluid and particle manipulation for biomedical and clinical applications. Herein, we developed a simple semicircular microchannel with an ultra-low aspect ratio to interrogate the unique formations of the helical vortex and Dean vortex by introducing order micro-obstacles. The purposeful and powerful regulation of dimensional confinement in the microchannel achieved significantly improved fluid mixing effects and fluid and particle manipulation in a high-throughput, highly efficient and easy-to-use way. Together, the results offer insights into the geometry-induced multi-vortex mechanism, which may contribute to simple, passive, continuous operations for biochemical and clinical applications, such as the detection and isolation of circulating tumor cells for cancer diagnostics.
RESUMEN
Microfluidic paper-based analytical devices (µPADs) have been suggested as alternatives for developing countries with suboptimal medical conditions because of their low diagnostic cost, high portability, and disposable characteristics. Recently, paper-based diagnostic devices enabling multi-step assays have been drawing attention, as they allow complicated tests, such as enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR), which were previously only conducted in the laboratory, to be performed on-site. In addition, user convenience and price of paper-based diagnostic devices are other competitive points over other point-of-care testing (POCT) devices, which are more critical in developing countries. Fluid manipulation technologies in paper play a key role in realizing multi-step assays via µPADs, and the expansion of biochemical applications will provide developing countries with more medical benefits. Therefore, we herein aimed to investigate recent fluid manipulation technologies utilized in paper-based devices and to introduce various approaches adopting several principles to control fluids on papers. Fluid manipulation technologies are classified into passive and active methods. While passive valves are structurally simple and easy to fabricate, they are difficult to control in terms of flow at a specific spatiotemporal condition. On the contrary, active valves are more complicated and mostly require external systems, but they provide much freedom of fluid manipulation and programmable operation. Both technologies have been revolutionized in the way to compensate for their limitations, and their advances will lead to improved performance of µPADs, increasing the level of healthcare around the world.
RESUMEN
Cell culturing experiments are ubiquitous to the study of biology, development of new medical treatments, and the biomanufacturing industry. However, there are still major technological barriers limiting the advancement of knowledge and ballooning the experimental costs associated with these systems. For example, currently, it is difficult to perform nondisruptive monitoring and control of the cells in the cultured samples. This often necessitates the use of sacrificial assays and results in product inconsistency. To resolve these bottlenecks, we present a prototype "addressable" microfluidic technology capable of spatiotemporal fluid and cell manipulations within living cultures. As a proof-of-concept, we demonstrate its ability to perform additive manufacturing by seeding cells in spatial patterns (including co-culturing multiple cell types) and subtractive manufacturing by removing surface adherent cells via the focused flow of trypsin. Additionally, we show that the device can sample fluids and perform cell "biopsies" (which can be subsequently sent for ex situ analysis), from any location within its culture chamber. Finally, the on-chip plumbing is completely automated using external electronics. This opens the possibility of performing long-term computer-driven experiments, where the cell behavior is modulated in response to the minimally disruptive observations (e.g., fluid sampling and cell biopsies) throughout the entire duration of the cultures. A limitation of the presented α prototype is that it is only two-dimensional (2D). However, technology serves as a foundation for ultimately extending the concept to three-dimensional (3D). Another limitation of the device is that it is currently made from poly(dimethylsiloxane) (PDMS), while more work needs to be done to manufacture from a material that degrades away or allow the cells to lay down the tissue matrix. Unfortunately, the existing biodegradable materials are typically not strong enough for the fabrication of microfluidic valves. Hence, new ones need to be developed before this technology can become mainstream. Yet, it is the hope of the authors that this will be achieved soon, and the microfluidic plumbing technology will eventually be scaled up to 3D, to overcome the limitations of the conventional cell culturing platforms.