Dominance complementation of parental heading date alleles of Hd1, Ghd7, DTH8, and PRR37 confers transgressive late maturation in hybrid rice.

Rice (Oryza sativa L.) is a short-day plant whose heading date is largely determined by photoperiod sensitivity (PS). Many parental lines used in hybrid rice breeding have weak PS, but their F1 progenies have strong PS and exhibit an undesirable transgressive late-maturing phenotype. However, the genetic basis for this phenomenon is unclear. Therefore, effective methods are needed for selecting parents to create F1 hybrid varieties with the desired PS. In this study, we used bulked segregant analysis with F1 Ningyou 1179 (strong PS) and its F2 population, and through analyzing both parental haplotypes and PS data for 918 hybrid rice varieties, to identify the genetic basis of transgressive late maturation which is dependent on dominance complementation effects of Hd1, Ghd7, DTH8, and PRR37 from both parents rather than from a single parental genotype. We designed a molecular marker-assisted selection system to identify the genotypes of Hd1, Ghd7, DTH8, and PRR37 in parental lines to predict PS in F1 plants prior to crossing. Furthermore, we used CRISPR/Cas9 technique to knock out Hd1 in Ning A (sterile line) and Ning B (maintainer line) and obtained an hd1-NY material with weak PS while retaining the elite agronomic traits of NY. Our findings clarified the genetic basis of transgressive late maturation in hybrid rice and developed effective methods for parental selection and gene editing to facilitate the breeding of hybrid varieties with the desired PS for improving their adaptability.

Genetic analysis of resistance to bean leaf crumple virus identifies a candidate LRR-RLK gene.

Bean leaf crumple virus (BLCrV) is a novel begomovirus (family Geminiviridae, genus Begomovirus) infecting common bean (Phaseolus vulgaris L.), threatening bean production in Latin America. Genetic resistance is required to ensure yield stability and reduce the use of insecticides, yet the available resistance sources are limited. In this study, three common bean populations containing a total of 558 genotypes were evaluated in different yield and BLCrV resistance trials under natural infection in the field. A genome-wide association study identified the locus BLC7.1 on chromosome Pv07 at 3.31 Mbp, explaining 8 to 16% of the phenotypic variation for BLCrV resistance. In comparison, whole-genome regression models explained 51 to 78% of the variation and identified the same region on Pv07 to confer resistance. The most significantly associated markers were located within the gene model Phvul.007G040400, which encodes a leucine-rich repeat receptor-like kinase subfamily III member and is likely to be involved in the innate immune response against the virus. The allelic diversity within this gene revealed five different haplotype groups, one of which was significantly associated with BLCrV resistance. As the same genome region was previously reported to be associated with resistance against other geminiviruses affecting common bean, our study highlights the role of previous breeding efforts for virus resistance in the accumulation of positive alleles against newly emerging viruses. In addition, we provide novel diagnostic single-nucleotide polymorphism markers for marker-assisted selection to exploit BLC7.1 for breeding against geminivirus diseases in one of the most important food crops worldwide.

Alternative splicing and deletion in S-RNase confer stylar-part self-compatibility in the apple cultivar 'Vered'.

Although self-incompatibility in apples (Malus × domestica Borkh.) is regulated by a single S-locus with multiple S-haplotypes that comprise pistil S (S-RNase) and pollen S genes, it is not desirable in commercial orchards because it requires cross-pollination to achieve stable fruit production. Therefore, it is important to identify and characterize self-compatible apple cultivars. However, little is known about self-compatibility (SC) and its underlying molecular mechanisms in apples. In this study, we discovered that 'Vered', an early maturing and low chilling-requiring apple cultivar, exhibits stable SC, which was evaluated via self-pollination tests. The S-genotype of 'Vered' was designated as S24S39sm. Results of genetic analysis of selfed progeny of 'Vered' revealed that SC is associated with the S39sm-haplotype, and molecular analyses indicated that it is caused by alternative splicing and a 205-bp deletion in S39sm-RNase. These events induce frameshifts and ultimately produce the defective S39sm-RNase isoforms that lack their C-terminal half. These results enabled us to develop a 117-bp DNA marker that can be used to assist in the selection of self-compatible apples with the dysfunctional S39sm-RNase. Thus, analysis of 'Vered' provided insights into the molecular mechanism of the very rare trait of natural stylar-part SC. Moreover, 'Vered' is a valuable genetic resource for breeding cultivars with SC and/or low chilling requirement in apple. Our findings contribute to a better understanding of self-compatible molecular mechanisms in apple and provide for the accelerated breeding of self-compatible apple cultivars.

Fine mapping of TFL, a major gene regulating fruit length in snake gourd (Trichosanthes anguina L).

Fruit length is a crucial agronomic trait of snake gourd (Trichosanthes anguina L); however, genes associated with fruit length have not been characterised. In this study, F2 snake gourd populations were generated by crossing the inbred lines, S1 and S2 (fruit lengths: 110 and 20 cm, respectively). Subsequently, bulk segregant analysis, sequencing, and fine-mapping were performed on the F2 population to identify target genes. Our findings suggest that the fruit length of snake gourd is regulated by a major-effect regulatory gene. Mining of genes regulating fruit length in snake gourd to provide a basis for subsequent selection and breeding of new varieties. Genotype-phenotype association analysis was performed on the segregating F2 population comprising 6,000 plants; the results indicate that the target gene is located on Chr4 (61,846,126-61,865,087 bp, 18.9-kb interval), which only carries the annotated candidate gene, Tan0010544 (designated TFL). TFL belongs to the MADS-box family, one of the largest transcription factor families. Sequence analysis revealed a non-synonymous mutation of base C to G at position 202 in the coding sequence of TFL, resulting in the substitution of amino acid Gln to Glu at position 68 in the protein sequence. Subsequently, an InDel marker was developed to aid the marker-assisted selection of TFL. The TFL in the expression parents within the same period was analysed using quantitative real-time PCR; the TFL expression was significantly higher in short fruits than long fruits. Therefore, TFL can be a candidate gene for determining the fruit length in snake gourd. Collectively, these findings improve our understanding of the genetic components associated with fruit length in snake gourds, which could aid the development of enhanced breeding strategies for plant species.

QTL analysis on a lemon population provides novel insights on the genetic regulation of the tolerance to the two-spotted spider mite attack.

BACKGROUND: Among the Citrus species, lemon (Citrus limon Burm f.) is one of the most affected by the two-spotted spider mite (Tetranychus urticae Koch). Moreover, chemical control is hampered by the mite's ability to develop genetic resistance against acaricides. In this context, the identification of the genetic basis of the host resistance could represent a sustainable strategy for spider mite control. In the present study, a marker-trait association analysis was performed on a lemon population employing an association mapping approach. An inter-specific full-sib population composed of 109 accessions was phenotyped through a detached-leaf assays performed in modified Huffaker cells. Those individuals, complemented with two inter-specific segregating populations, were genotyped using a target-sequencing approach called SPET (Single Primer Enrichment Technology), the resulting SNPs were employed for the generation of an integrated genetic map. RESULTS: The percentage of damaged area in the full-sib population showed a quantitative distribution with values ranging from 0.36 to 9.67%. A total of 47,298 SNPs were selected for an association mapping study and a significant marker linked with resistance to spider mite was detected on linkage group 5. In silico gene annotation of the QTL interval enabled the detection of 13 genes involved in immune response to biotic and abiotic stress. Gene expression analysis showed an over expression of the gene encoding for the ethylene-responsive transcription factor ERF098-like, already characterized in Arabidopsis and in rice for its involvement in defense response. CONCLUSION: The identification of a molecular marker linked to the resistance to spider mite attack can pave the way for the development of marker-assisted breeding plan for the development of novel selection coupling favorable agronomical traits (e.g. fruit quality, yield) with a higher resistance toward the mite.

Gene pyramiding improved cell membrane stability under heat stress in cotton (Gossypium hirsutum L.).

Climate change has been drastically affecting cotton not only in Pakistan but also all over the world. Normally cotton is known as heat tolerant when compared with other crops, but if the high temperature occurs during flowering period the yield decreases significantly. Marker assisted gene pyramiding provides a sustainable solution to improve heat tolerance. A total of seven genotypes were developed by a series of crossing seven tolerant genotypes over the period of three years. Tolerant genotypes were selected by screening for important transcription factors (GHSP26, HSP3, HSFA2, DREB1A, HSP101, DREB2A, GhNAC2, HSPCB, GhWRKY41, TPS, GbMYB5, ANNAT8, GhMPK17, GhMKK1, GhMKK3, GhMPK2, HSC70, APX1 and GhPP2A1). The seven genotypes were evaluated under normal and heat stress in a multi-year trial. The traits related to heat tolerance, such as cell membrane stability, relative water content, excised leaf water loss, plant height, number of nodes, internodal length, number of buds, number of bolls and leaf area was observed under normal and heat stress conditions. The developed genotypes showed improvement in cell membrane stability and relative water content under heat stress. The genotypes [(VH-305×MNH-886)×MNH-1035)×NIAB-78)], [(MNH-1035×MNH-886)×MNH-886)×SM-431] and [(MNH-1035×MNH-886)×MNH-886)×SS-32] depicted heat tolerance and could be used as heat tolerant material for variety development in breeding programs.

Integrating targeted genetic markers to genotyping-by-sequencing for an ultimate genotyping tool.

New selection methods, using trait-specific markers (marker-assisted selection (MAS)) and/or genome-wide markers (genomic selection (GS)), are becoming increasingly widespread in breeding programs. This new era requires innovative and cost-efficient solutions for genotyping. Reduction in sequencing cost has enhanced the use of high-throughput low-cost genotyping methods such as genotyping-by-sequencing (GBS) for genome-wide single-nucleotide polymorphism (SNP) profiling in large breeding populations. However, the major weakness of GBS methodologies is their inability to genotype targeted markers. Conversely, targeted methods, such as amplicon sequencing (AmpSeq), often face cost constraints, hindering genome-wide genotyping across a large cohort. Although GBS and AmpSeq data can be generated from the same sample, an efficient method to achieve this is lacking. In this study, we present the Genome-wide & Targeted Amplicon (GTA) genotyping platform, an innovative way to integrate multiplex targeted amplicons into the GBS library preparation to provide an all-in-one cost-effective genotyping solution to breeders and research communities. Custom primers were designed to target 23 and 36 high-value markers associated with key agronomical traits in soybean and barley, respectively. The resulting multiplex amplicons were compatible with the GBS library preparation enabling both GBS and targeted genotyping data to be produced efficiently and cost-effectively. To facilitate data analysis, we have introduced Fast-GBS.v3, a user-friendly bioinformatic pipeline that generates comprehensive outputs from data obtained following sequencing of GTA libraries. This high-throughput low-cost approach will greatly facilitate the application of DNA markers as it provides required markers for both MAS and GS in a single assay.

Pyramiding of triple Clubroot resistance loci conferred superior resistance without negative effects on agronomic traits in Brassica napus.

Clubroot disease caused by Plasmodiophora brassicae is becoming a serious threat to rapeseed (Brassica napus) production worldwide. Breeding resistant varieties using CR (clubroot resistance) loci is the most promising solution. Using marker-assisted selection and speed-breeding technologies, we generated Brassica napus materials in homozygous or heterozygous states using CRA3.7, CRA08.1, and CRA3.2 loci in the elite parental line of the Zhongshuang11 background. We developed three elite lines with two CR loci in different combinations and one line with three CR loci at the homozygous state. In our study, we used six different clubroot strains (Xinmin, Lincang, Yuxi, Chengdu, Chongqing, and Jixi) which are categorized into three groups based on our screening results. The newly pyramided lines with two or more CR loci displayed better disease resistance than the parental lines carrying single CR loci. There is an obvious gene dosage effect between CR loci and disease resistance levels. For example, pyramided lines with triple CR loci in the homozygous state showed superior resistance for all pathogens tested. Moreover, CR loci in the homozygous state are better on disease resistance than the heterozygous state. More importantly, no negative effect was observed on agronomic traits for the presence of multiple CR loci in the same background. Overall, these data suggest that the pyramiding of triple clubroot resistance loci conferred superior resistance with no negative effects on agronomic traits in Brassica napus.

Rapid breeding of an early maturing, high-quality, and high-y.ielding rice cultivar using marker­assisted selection coupled with optimized anther culture.

With the global shift towards healthier eating habits, the focus of the rice industry has evolved from quantity to quality. In China, the Yangtze River Basin is the main area consuming long-grain and high-quality indica rice. Hubei Province, a significant rice-producing area, currently cultivates a limited range of rice varieties, risking degradation and diminishing economic returns. Therefore, it is imperative to cultivate elite rice varieties tailored to the local production conditions and can significantly enhance the added value. This study bred the novel rice cultivar "Runxiangyu", characterized by early maturity, high quality, and high yield. It is a hybrid of Ezhong 5, known for its moderate height and excellent quality, albeit with a long growth period and lack of fragrance, and Yuzhenxiang, renowned for its high quality, short growth period, and fragrance but limited by its tall stature and poor tillering ability. The breeding process utilized optimized anther culture coupled with molecular marker-assisted selection (MAS) and phenotype analysis. In the field, the developed cultivar was 120.9 cm tall and had an entire growth period of 117.5 days, demonstrating moderate disease resistance and excellent heat tolerance. Its grains are fragrant, meeting the national standard of grade two high-quality rice set by the Food Quality Supervision and Inspection Center of the Ministry of Agriculture and Rural Areas). Exhibiting superior agronomic traits, such as plant type, height, growth period, and stress resistance, along with and quality attributes, including grain shape, chalkiness, fragrance, and taste, "Runxiangyu" was certified by the Agricultural Crop Variety Certification Commission of Hubei in 2022. These findings suggested that molecular MAS coupled with optimized anther culture and multi-site phenotype analysis is an efficient and rapid method for crop breeding. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01495-4.

Characterization of the powdery mildew resistance locus in wheat breeding line Jimai 809 and its breeding application.

Powdery mildew, caused by Blumeria graminis f. sp. tritici (Bgt), is a severe disease that affects the yield and quality of wheat. Popularization of resistant cultivars in production is the preferred strategy to control this disease. In the present study, the Chinese wheat breeding line Jimai 809 showed excellent agronomic performance and high resistance to powdery mildew at the whole growth stage. To dissect the genetic basis for this resistance, Jimai 809 was crossed with the susceptible wheat cultivar Junda 159 to produce segregation populations. Genetic analysis showed that a single dominant gene, temporarily designated PmJM809, conferred the resistance to different Bgt isolates. PmJM809 was then mapped on the chromosome arm 2BL and flanked by the markers CISSR02g-1 and CIT02g-13 with genetic distances 0.4 and 0.8 cM, respectively, corresponding to a physical interval of 704.12-708.24 Mb. PmJM809 differed from the reported Pm genes on chromosome arm 2BL in origin, resistance spectrum, physical position and/or genetic diversity of the mapping interval, also suggesting PmJM809 was located on a complex interval with multiple resistance genes. To analyze and screen the candidate gene(s) of PmJM809, six genes related to disease resistance in the candidate interval were evaluated their expression patterns using an additional set of wheat samples and time-course analysis post-inoculation of the Bgt isolate E09. As a result, four genes were speculated as the key candidate or regulatory genes. Considering its comprehensive agronomic traits and resistance findings, PmJM809 was expected to be a valuable gene resource in wheat disease resistance breeding. To efficiently transfer PmJM809 into different genetic backgrounds, 13 of 19 closely linked markers were confirmed to be suitable for marker-assisted selection. Using these markers, a series of wheat breeding lines with harmonious disease resistance and agronomic performance were selected from the crosses of Jimai 809 and several susceptible cultivars. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01467-8.

Genotype selection identified elite lines through quantitative trait loci mapping of agronomically important traits in wheat.

Wheat is one of the most important staple foods in the world. Genetic characterization of wheat agronomically important traits is crucial for yield improvement through molecular breeding. In this study, a recombinant inbred line (RIL) population was developed by crossing a local adapted high yield variety Jimai 22 (JM22) with an external variety Cunmai no.1 (CM1). A high-density genetic map containing 7,359 single nucleotide polymorphism (SNP) markers was constructed. Quantitative trait loci (QTL) mapping identified 61 QTL for eight yield-related traits under six environments (years). Among them, 17 QTL affecting spike number per plant, grain number per spike and thousand grain weight showed high predictability for theoretical yield per plant (TYP), of which, 12 QTL alleles positively contributed to TYP. Nine promising candidate genes for seven of the 12 QTL were identified including three known wheat genes and six rice orthologs. Four elite lines with TYP increased by 5.6%-15.2% were identified through genotype selection which carried 7-9 favorable alleles from JM22 and 2-3 favorable alleles from CM1 of the 12 QTL. Moreover, the linked SNPs of the 12 QTL were converted to high-throughput kompetitive allele-specific PCR (KASP) markers and validated in the population. The mapped QTL, identified promising candidate genes, developed elite lines and KASP markers are highly valuable in future genotype selection to improve wheat yield. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01496-3.

Breeding for brown plant hopper resistance in rice: recent updates and future perspectives.

Rice yield is often threatened by various stresses caused by biotic and abiotic agents. Many biotic stress factors are known to cause crop growth and yield from seedling to maturity. The brown plant hopper (BPH) can potentially reduce the rice yield to an extent of up to 80%. Intensive research efforts in 1972 led to a better understanding of pathogens/insect and host-plant resistance. This resulted in the identification of about 70 BPH-resistant genes and quantitative trait loci (QTLs) from diversified sources including wild germplasm. However, the BPH-resistant improved varieties with a single resistant gene lose the effectiveness of the gene because of the evolution of new biotypes. This review inferred that the level of resistance durable when incorporating multiple 'R' gene combinations when compared to a single gene. Breeding tools like wide hybridization, biparental crosses, marker-assisted introgression, pyramiding, and genetic engineering have been widely employed to breed rice varieties with single or combination of 'R' genes conferring durable resistance to BPH. Many other genes like receptor-like kinase genes, transcriptional factors, etc., were also found to be involved in the resistant mechanisms of 'R' genes. Due to this, the durability of the resistance can be improved and the level of resistance of the 'R' genes can be increased by adopting newer breeding tools like genome editing which hold promise to develop rice varieties with stable resistance.

An SNP based genotyping assay for genes associated with drought tolerance in bread wheat.

BACKGROUND: SnRK2 plays vital role in responding to adverse abiotic stimuli. The applicability of TaSnRK2.4 and TaSnRK2.9 was investigated to leverage the potential of these genes in indigenous wheat breeding programs. METHODS: Genetic diversity was assessed using pre-existing markers for TaSnRK2.4 and TaSnRK2.9. Furthermore, new markers were also developed to enhance their broader applicability. KASP markers were designed for TaSnRK2.4, while CAPS-based markers were tailored for TaSnRK2.9. RESULTS: Analysis revealed lack of polymorphism in TaSnRK2.4 among Pakistani wheat germplasm under study. To validate this finding, available gel-based markers for TaSnRK2.4 were employed, producing consistent results and offering limited potential for application in marker-assisted wheat breeding with Pakistani wheat material. For TaSnRK2.9-5A, CAPS2.9-5A-1 and CAPS2.9-5A-2 markers were designed to target SNP positions at 308 nt and 1700 nt revealing four distinct haplotypes. Association analysis highlighted the significance of Hap-5A-1 of TaSnRK2.9-5A, which exhibited association with an increased number of productive tillers (NPT), grains per spike (GPS), and reduced plant height (PH) under well-watered (WW) conditions. Moreover, it showed positive influence on NPT under WW conditions, GPS under water-limited (WL) conditions, and PH under both WW and WL conditions. High selection intensity observed for Hap-5A-1 underscores the valuable role it has played in Pakistani wheat breeding programs. Gene expression studies of TaSnRK2.9-5A revealed the involvement of this gene in response to PEG, NaCl, low temperature and ABA treatments. CONCLUSION: These findings propose that TaSnRK2.9 can be effectively employed for improving wheat through marker-assisted selection in wheat breeding efforts.

GWAS determined genetic loci associated with callus induction in oil palm tissue culture.

KEY MESSAGE: GWAS identified six loci at 25 kb downstream of WAK2, a crucial gene for cell wall and callus formation, enabling development of a SNP marker for enhanced callus induction potential. Efficient callus induction is vital for successful oil palm tissue culture, yet identifying genomic loci and markers for early detection of genotypes with high potential of callus induction remains unclear. In this study, immature male inflorescences from 198 oil palm accessions (dura, tenera and pisifera) were used as explants for tissue culture. Callus induction rates were collected at one-, two- and three-months after inoculation (C1, C2 and C3) as phenotypes. Resequencing generated 11,475,258 high quality single nucleotide polymorphisms (SNPs) as genotypes. GWAS was then performed, and correlation analysis revealed a positive association of C1 with both C2 (R = 0.81) and C3 (R = 0.50), indicating that C1 could be used as the major phenotype for callus induction rate. Therefore, only significant SNPs (P ≤ 0.05) in C1 were identified to develop markers for screening individuals with high potential of callus induction. Among 21 significant SNPs in C1, LD block analysis revealed six SNPs on chromosome 12 (Chr12) potentially linked to callus formation. Subsequently, 13 SNP markers were identified from these loci and electrophoresis results showed that marker C-12 at locus Chr12_12704856 can be used effectively to distinguish the GG allele, which showed the highest probability (69%) of callus induction. Furthermore, a rapid SNP variant detection method without electrophoresis was established via qPCR-based melting curve analysis. Our findings facilitated marker-assisted selection for specific palms with high potential of callus induction using immature male inflorescence as explant, aiding ortet palm selection in oil palm tissue culture.

Construction of a high-density linkage map and QTL detection for growth traits in South African abalone (Haliotis midae).

Haliotis midae is one of the most important molluscs in South African commercial aquaculture. In this study, a high-resolution integrated linkage map was constructed, and QTL identified using 2b-RADseq for genotyping SNPs in three families. The final integrated linkage map was composed by merging the individual family maps, resulting in 3290 informative SNPs mapping to 18 linkage groups, conforming to the known haploid chromosome number for H. midae. The total map spanned 1798.25 cM with an average marker interval of 0.55 cM, representing a genome coverage of 98.76%. QTL analysis, across all three families, resulted in a total of five QTL identified for growth-related traits, shell width, shell length, and total body weight. For shell width and total body weight, one QTL was identified for each trait respectively, whilst three QTL were identified for shell length. The identified QTL respectively explained between 7.20% and 11.40% of the observed phenotypic variance. All three traits were significantly correlated (r = 0.862-0.970; p < 0.01) and shared overlapping QTL. The QTL for growth traits were mapped back to the H. midae draft genome and BLAST searches revealed the identity of candidate genes, such as egf-1, megf10, megf6, tnx, sevp1, kcp, notch1, and scube2 with possible functional roles in H. midae growth. The constructed high-density linkage map and mapped QTL have given valuable insights regarding the genetic architecture of growth-related traits and will be important genetic resources for marker-assisted selection. It remains, however, important to validate causal variants through linkage disequilibrium fine mapping in future.

Identification of Two Novel QTL for Fusarium Head Blight Resistance in German Wheat Cultivar Centrum.

Fusarium head blight (FHB) is a devastating disease that occurs in warm and humid environments. The German wheat 'Centrum' has displayed moderate to high levels of FHB resistance in the field for many years. In this study, an F6:8 recombinant inbred line (RIL) population derived from cross 'Centrum' × 'Xinong 979' was evaluated for FHB response following point inoculation in five environments. The population and parents were genotyped using the GenoBaits Wheat 16 K Panel. Stable quantitative trait loci (QTL) associated with FHB resistance in 'Centrum' were mapped on chromosome arms 2DS and 5BS. The most effective QTL, located in 2DS, was identified as a new chromosome region represented by a 1.4 Mb interval containing 17 candidate genes. Another novel QTL was mapped in chromosome arm 5BS of a 5BS to 7BS translocation chromosome. In addition, two environmentally sensitive QTL were mapped on chromosome arms 2BL from 'Centrum' and 5AS from 'Xinong 979'. Polymorphisms of flanking phenotypic variance explained (PVE) markers (allele-specific quantitative PCR [AQP]) AQP-6 for QFhb.nwafu-2DS and 16K-13073 for QFhb.nwafu-5BS were validated in a panel of 217 cultivars and breeding lines. These markers could be useful for marker-assisted selection (MAS) of FHB resistance and provide a starting point for fine mapping and marker-based cloning of the resistance genes.

Characterization of a Powdery Mildew Resistance Gene in Wheat Breeding Line Jingzi 102 Using Bulk Segregant RNA Sequencing.

Wheat (Triticum aestivum L.) is one of the most important crops worldwide. Powdery mildew caused by Blumeria graminis f. sp. tritici is a destructive disease threatening wheat yield and quality. The utilization of resistant genes and cultivars is considered the most economical, environmentally friendly, and effective method to control powdery mildew. Wheat breeding line Jingzi 102 was highly resistant to powdery mildew at both seedling and adult plant stages. Genetic analysis of F1, F2, and F2:3 populations of "Jingzi 102 × Shixin 828" showed that the resistance of Jingzi 102 against powdery mildew isolate E09 at the seedling stage was controlled by a single dominant gene, temporarily designated PmJZ. Using bulked segregant RNA sequencing combined with molecular markers analysis, PmJZ was located on the long arm of chromosome 2B and flanked by markers BJK695-1 and CIT02g-20 with the genetic distances of 1.2 and 0.5 centimorgan, respectively, corresponding to the bread wheat genome of Chinese Spring (International Wheat Genome Sequencing Consortium RefSeq v2.1) 703.8 to 707.6 Mb. PmJZ is most likely different from the documented Pm genes on chromosome 2BL based on their physical positions, molecular markers analysis, and resistance spectrum. Based on the gene annotation information, five genes related to disease resistance could be considered as the candidate genes of PmJZ. To accelerate the application of PmJZ, the flanking markers BJK695-1 and CIT02g-20 can serve for marker-assisted selection of PmJZ in wheat disease-resistance breeding.

Molecular Markers and Marker-Assisted Selection Provide Genetic Insights for Identifying Key Quantitative Trait Locus for Watermelon Rind Thickness.

Rind thickness (RT) is an important agronomic trait in watermelon [Citrullus lanatus (Thunb.) Mansf.] and affects watermelon storability. However, genetic studies on this trait, as well as gene regulation studies, are scarce and of limited production significance. We constructed a temporary F2 generation using the highly differentiated thick-rind watermelon 'XiaoXiGua-4' and the thin-rind watermelon 'DuanMan' as parents and localized the Cla97C02G044120 gene, which controls the thickness of watermelon rind, to the intervals of chromosome 2, CL2-32303995 and CL2-32316840, through 2 years of genetic analysis. No exonic mutations were found in this gene, but two promoter mutations resulted in changes in the promoter progenitor. Fluorescence quantitative PCR analysis revealed highly significant differences in expression at 1 d and 28 d, and the expression was significantly lower in thick-skinned watermelon varieties. Marker-assisted selection (MAS) for this trait was performed using the Caps marker CL2-32303995 and the InDel marker CL2-32316840, which not only verified the stability of the localization interval but also distinguished thick rind from thin rind. These results can be used for germplasm resource screening and have strong breeding significance.

Construction and application of a new watermelon germplasm with the phenotype of dwarf and branchless.

Watermelon (Citrullus lanatus) is a widely cultivated cucurbitaceae crop appreciated by consumers worldwide. However, the long vine and abundant lateral branches of currently cultivated watermelon varieties hinder light simplification and mechanized cultivation, affecting plant spacing and row spacing requirements. To address this, the development of watermelon with dwarf and branchless traits has become a crucial direction for the industry. In previous studies, the genes controlling dwarf (Cldw-1) and branchless (Clbl) traits were mapped and cloned. Marker-assisted selection markers, dCAPS3 and dCAPS10, were developed for these traits, respectively. In this study, the dwarf germplasm WM102 and the branchless germplasm WCZ were crossed to obtain F1 .Further self-crossing of the F1 individuals resulted in the F2 population. Through multiple generations of self-pollination, a new watermelon germplasm DM with double mutation (dwarf and branchless) was obtained. DM exhibited stable inheritance without segregation. Moreover, DM was used as a donor parent for crossing with commercial watermelon materials, and near-isogenic lines (NILs) with the dwarf and branchless traits were developed. These NILs carry additional desirable agronomic traits and provide valuable genetic resources for future watermelon breeding programs, particularly in improving plant architecture and overall quality. The development and application of DM and NILs hold great potential for advancing the watermelon industry toward industrialization, large-scale cultivation, and enhanced plant architecture.

Cost-effective duplex Kompetitive Allele Specific PCR markers for homologous genes facilitating wheat breeding.

BACKGROUND: Owing to successful cloning of wheat functional genes in recent years, more traits can be selected by diagnostic markers, and consequently, effective molecular markers will be powerful tools in wheat breeding programs. RESULTS: The present study proposed a cost-effective duplex Kompetitive Allele Specific PCR (dKASP) marker system that combined multiplex PCR and KASP™ technology to yield twice the efficiency at half the cost compared with the common KASP™ markers and provide great assistance in breeding selection. Three dKASP markers for the major genes controlling plant height (Rht-B1/Rht-D1), grain hardness (Pina-D1/Pinb-D1), and high-molecular-weight glutenin subunits (Glu-A1/Glu-D1) were successfully developed and applied in approved wheat varieties growing in the middle and lower reaches of the Yangtze River and advanced lines from our breeding program. Three markers were used to test six loci with high efficiency. In the approved wheat varieties, Rht-B1b was the most important dwarfing allele, and the number of accessions carrying Pinb-D1b was much greater than that of the accessions carrying Pina-D1b. Moreover, the number of accessions carrying favorable alleles for weak-gluten wheat (Null/Dx2) was much greater than that of the accessions carrying favorable alleles for strong-gluten wheat (Ax1 or Ax2*/Dx5). In the advanced lines, Rht-B1b and Pinb-D1b showed a significant increase compared with the approved varieties, and the strong-gluten (Ax1 or Ax2*/Dx5) and weak-gluten (Null/Dx2) types also increased. CONCLUSION: A cost-effective dKASP marker system that combined multiplex PCR and KASP™ technology was proposed to achieve double the efficiency at half the cost compared with the common KASP™ markers. Three dKASP markers for the major genes controlling PH (Rht-B1/Rht-D1), GH (Pina-D1/Pinb-D1), and HMW-GS (Glu-A1/Glu-D1) were successfully developed, which would greatly improve the efficiency of marker-assisted selection of wheat.