A Sunlight-Driven Self-Cleaning CuCo-MOF Composite Membrane for Highly Efficient Emulsion Separation and Water Purification.

The fouling phenomenon of membranes has hindered the rapid development of separation technology in wastewater treatment. The integration of materials into membranes with both excellent separation performance and self-cleaning properties still pose challenges. Here, a self-assembled composite membrane with solar-driven self-cleaning performance is reported for the treatment of complex oil-water emulsions. The mechanical robustness of the composite membrane is enhanced by the electrostatic attraction between chitosan and metal-organic frameworks (MOF) CuCo-HHTP as well as the crosslinking effect of glutaraldehyde. Molecular dynamics (MD) simulations also revealed the hydrogen bonding interaction between chitosan and CuCo-HHTP. The composite membrane of CuCo-HHTP-5@CS/MPVDF exhibits a high flux ranging from 700.6 to 2350.6 L∙m-2∙h-1∙bar-1 and excellent separation efficiency (>99.0%) for various oil-water emulsions, including crude oil, kerosene, and other light oils. The addition of CuCo-HHTP shows remarkable photothermal effects, thus demonstrating excellent solar-driven self-cleaning capability and antibacterial performance (with an efficiency of ≈100%). Furthermore, CuCo-HHTP-5@CS/MPVDF can activate peroxomonosulfate (PMS) under sunlight, quickly removing oil-fouling and dyes. Density functional theory (DFT) calculations indicate that the bimetallic sites of Cu and Co in CuCo-HHTP effectively promoted the activation of PMS. This study provides distinctive insights into the multifaceted applications of MOFs-derived photothermal anti-fouling composite membranes.

Uncovering Photoelectronic and Photothermal Effects in Plasmon-Mediated Electrocatalytic CO2 Reduction.

Plasmon-mediated electrocatalysis that rests on the ability of coupling localized surface plasmon resonance (LSPR) and electrochemical activation, emerges as an intriguing and booming area. However, its development seriously suffers from the entanglement between the photoelectronic and photothermal effects induced by the decay of plasmons, especially under the influence of applied potential. Herein, using LSPR-mediated CO2 reduction on Ag electrocatalyst as a model system, we quantitatively uncover the dominant photoelectronic effect on CO2 reduction reaction over a wide potential window, in contrast to the leading photothermal effect on H2 evolution reaction at relatively negative potentials. The excitation of LSPR selectively enhances the CO faradaic efficiency (17-fold at -0.6 VRHE ) and partial current density (100-fold at -0.6 VRHE ), suppressing the undesired H2 faradaic efficiency. Furthermore, in situ attenuated total reflection-surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) reveals a plasmon-promoted formation of the bridge-bonded CO on Ag surface via a carbonyl-containing C1 intermediate. The present work demonstrates a deep mechanistic understanding of selective regulation of interfacial reactions by coupling plasmons and electrochemistry.

Predictable and adjustable broadband gold nanorods for photothermal effects and foldable performances.

Colloidal gold nanorods (GNRs) have demonstrated their potential to absorb light within specific wavelength bands and induce photothermal effects. However, the unpredictability and lack of adjustability in the broadband spectrum formed by the self-assembly of gold nanospheres or the coupling of various sizes of GNRs have posed significant challenges. To address this, we have developed broadband GNRs (BGNRs) with a predictable and adjustable extinction band in the visible and near-infrared regions. The BGNRs were synthesized by simply mixing GNRs with different aspect ratios, allowing for control over the bandwidths and positions of the extinction bands. Subsequently, the BGNRs were coated with silica and underwent surface modification. The resulting BGNRs@SiO2were then mixed with either polydimethylsiloxane (PDMS) or polyvinylidene fluoride (PVDF) to create BGNRs@SiO2/PDMS (or PVDF) films. The BGNRs@SiO2/PDMS and BGNRs@SiO2/PVDF films both exhibit excellent photothermal performance properties. Additionally, the light absorption intensity of the BGNRs@SiO2/PVDF film linearly increases upon folding, leading to significantly enhanced photothermal performance after folding. This work demonstrates that plasmonic colloidal GNRs, without the need for coupling, can yield predictable and adjustable extinction bands. This finding holds great promise for future development and practical applications, particularly in the transfer of these properties to films.

Cascade reaction triggering and photothermal AuNPs@MIL MOFs doped intraocular lens for enhanced posterior capsular opacification prevention.

Posterior capsular opacification (PCO) is the most common complication after cataract surgery. Present strategies can't meet the clinical needs of long-term prevention. This research reports a novel intraocular lens (IOL) bulk material with high biocompatibility and synergistic therapy. Gold nanoparticles (AuNPs) doped MIL-101-NH2 metal-organic frameworks (MOFs) (AuNPs@MIL) was firstly fabricated via in situ reductions. Then the functionalized MOFs were uniformly mixed with glycidyl methacrylate (GMA) and 2-(2-ethoxyethoxy) ethyl acrylate (EA) to form the nanoparticle doped polymer (AuNPs@MIL-PGE), and which was used to fabricate IOL bulk materials. The materials' optical and mechanical properties with different mass contents of nanoparticles are investigated. Such bulk functionalized IOL material could efficiently remove residual human lens epithelial cells (HLECs) in the capsular bag in the short term, and can prevent PCO on demand in the long run by near-infrared illumination (NIR) action. In vivo and in vitro experiments demonstrate the biosafety of the material. The AuNPs@MIL-PGE exhibits excellent photothermal effects, which could inhibit cell proliferation under NIR and doesn't cause pathological effects on the surrounding tissues. Such functionalized IOL can not only avoid the side effects of the antiproliferative drugs but also realize the enhanced PCO prevention in clinical practice.

Enhanced Photocatalytic Hydrolysis Performance of Chiral Molecule Loaded Titanium Disulfide Nanosheets.

The photoelectrochemical (PEC) water decomposition is a promising method to produce hydrogen from water. To improve the water decomposition efficiency of the PEC process, it is necessary to inhibit the generation of H2 O2 byproducts and reduce the overpotential required by cheap catalysts and a high current density. Studies have shown that coating the electrode with chiral molecules or chiral films can increase the hydrogen production and reduce the generation of H2 O2 byproducts. This is interpreted as the result of a chiral induced spin selectivity (CISS) effect, which induces a spin correlation between the electrons that are transferred to the anode. Here, we report the adsorption of chiral molecules onto titanium disulfide nanosheets. Firstly, titanium disulfide nanosheets were synthesized via thermal injection and then dispersed through ultrasonic crushing. This strategy combines the CISS with the plasma effect caused by the narrow bandgap of two-dimensional sulfur compounds to promote the PEC water decomposition with a high current density.

Self-Adhesive Hyaluronic Acid/Antimicrobial Peptide Composite Hydrogel with Antioxidant Capability and Photothermal Activity for Infected Wound Healing.

Bacterial infection can delay wound healing, causing wounds to deteriorate and even threaten the patient's life. Recently, although many composite hydrogels as wound dressing have been developed, it is still highly desired to construct photothermal hydrogels with antimicrobial and antioxidant properties to accelerate the infected wound healing. In this work, a hyaluronic acid (HA)-based composite hydrogel consisting of a dopamine-substituted antimicrobial peptide (DAP) and Iron (III) ions is developed, which exhibits photothermal-assisted promotion and acceleration of healing process of bacteria-infected wounds. DAP, serving as both antimicrobial agent and ROS-scavenger, forms Schiff's base bonds with aldehyde hyaluronic acid (AHA) and iron-catechol coordination bonds to reinforce the composite hydrogel. The presence of Fe3+ can also promote covalent polymerization of dopamine, which endows the hydrogel with photothermal capacity. The in vitro and in vivo experiments prove that the composite hydrogel can effectively accelerate the infected wound healing process, including antibacterial, accelerated collagen deposition, and re-epithelization. This study suggests that the multifunctional composite hydrogel possesses remarkable potential for bacteria-infected wound healing by combining inherent antimicrobial activity, antioxidant capability, and photothermal effect.

Starch Capped Atomically Thin CuS Nanocrystals for Efficient Photothermal Therapy.

Photothermal therapy requires efficient plasmonic nanomaterials with small size, good water dispersibility, and biocompatibility. This work reports a one-pot, 2-min synthesis strategy for ultrathin CuS nanocrystals (NCs) with precisely tunable size and localized surface plasmon resonance (LSPR), where a single-starch-layer coating leads to a high LSPR absorption at the near-IR wavelength 980 nm. The CuS NC diameter increases from 4.7 (1 nm height along [101]) to 28.6 nm (4.9 nm height along [001]) accompanied by LSPR redshift from 978 to 1200 nm, as the precursor ratio decreases from 1 to 0.125. Photothermal temperature increases by 38.6 °C in 50 mg L-1 CuS NC solution under laser illumination (980 nm, 1.44 W cm-2 ). Notably, 98.4% of human prostate cancer PC-3/Luc+ cells are killed by as little as 5 mg L-1 starch-coated CuS NCs with 3-min laser treatment, whereas CuS NCs without starch cause insignificant cell death. LSPR modeling discloses that the starch layer enhances the photothermal effect by significantly increasing the free carrier density and blue-shifting the LSPR toward 980 nm. This study not only presents a new type of photothermally highly efficient ultrathin CuS NCs, but also offers in-depth LSPR modeling investigations useful for other photothermal nanomaterial designs.

Near-Infrared PhotoInitiating Systems: Photothermal versus Triplet-Triplet Annihilation-Based Upconversion Polymerization.

NIR light-induced polymerization has attracted more and more attention in the photopolymerization field due to the possibility to use safer and more penetrating wavelengths, reducing the hazardousness. Here, a novel perspective for the free radical polymerization of acrylate-based monomers based on triplet-triplet annihilation upconversion (TTA-UC) is proposed, avoiding the introduction of heavy metals, usually required in the TTA processes. Thermal imaging experiments and Fourier transform infrared spectroscopy are respectively used to record the temperature during NIR irradiation and measure the reactive function conversion. The competition between the TTA-UC and the NIR photothermal activation is investigated to compare the relative efficiency of both NIR processes. In view of the results obtained by the different methods, the photothermal effect seems to get the upper hand over the photoactivation of the system.

A Micron-Sized Laser Photothermal Effect Evaluation System and Method.

The photothermal effects of lasers have played an important role in both medical laser applications and the development of cochlear implants with optical stimulation. However, there are few methods to evaluate the thermal effect of micron-sized laser spots interacting with other tissues. Here, we present a multi-wavelength micro-scale laser thermal effect measuring system that has high temporal, spatial and temperature resolutions, and can quantitatively realize evaluations in real time. In this system, with accurate 3D positioning and flexible pulsed laser parameter adjustments, groups of temperature changes are systematically measured when the micron-sized laser spots from six kinds of wavelengths individually irradiate the Pd/Cr thermocouple junction area, and reference data of laser spot thermal effects are obtained. This work develops a stable, reliable and universal tool for quantitatively exploring the thermal effect of micron-sized lasers, and provides basic reference data for research on light-stimulated neuron excitement in the future.

Ultrathin Near-Infrared Light Activated Nano-Hotplate Catalyst.

A combined photothermal-catalytic system that contains a single active element, without using different entities for separate roles (catalytic vs photothermal), is designed here for efficient catalytic reactions. Herein, ultrathin (sub-6 nm) rectangular-like KNdF4 nanoplates consisting of 3-4 unit cell layers are prepared where the Nd3+ ions act as a Lewis acid catalyst. In addition, the nanoplates undergo light-to-heat conversion when irradiated with NIR light due to cross-relaxation and nonradiative relaxation processes from excited Nd3+ . The cyanosilylation of a series of ketones is performed using the nano-hotplate catalysts to give near quantitative yields of the cyanohydrin trimethylsilyl ethers. This is because of the high surface area-to-volume ratio of the thin nanoplates that provides a large number of surface Nd3+ catalytic sites for reaction. The reaction kinetics are enhanced by the photothermal effect, leading to the observed > 10-fold increase in product yields.

Biocompatible Polymer Nanocomposites Integrating Magnetic Polyoxomolybdates for Enhanced MRI and On-Site Activated Photothermal Properties.

This work reports the ionic composition of a PEGylated and chemically crosslinked polyethyleneimine with a gadolinium-coordinated polyoxomolybdate cluster, K17 [Gd(P2 Mo17 O61 )2 ], via electrostatic interaction. The prepared composites form nanoobjects with an average size of ≈27 nm at dried state and maintain structural stability in aqueous solution. While the biocompatibility on HeLa cells is demonstrated, the polymer-shielded multifunctional nanoplatform shows both the combined magnetic resonance imaging and redox-triggered photothermal conversion effect. As a contrast agent, the T1 -weighed relaxivity reaches up to 22.77 mm-1  s-1 . The photothermal conversion of the prepared composites can be aroused by yielding a broad near infrared (NIR) adsorption through on-site reduction of the glutathione that is enriched in the tumor environment. The high efficiency ≈61.0% under the irradiation of 808 nm NIR laser illustrates a distinct treatment capability according to cell counting Kit-8 assay while the obvious inhibition for the growth of tumor cells is observed.

Long-Range Distributed Solar Irradiance Sensing Using Optical Fibers.

Until recently, the amount of solar irradiance reaching the Earth surface was considered to be a steady value over the years. However, there is increasing observational evidence showing that this quantity undergoes substantial variations over time, which need to be addressed in different scenarios ranging from climate change to solar energy applications. With the growing interest in developing solar energy technology with enhanced efficiency and optimized management, the monitoring of solar irradiance at the ground level is now considered to be a fundamental input in the pursuit of that goal. Here, we propose the first fiber-based distributed sensor able of monitoring ground solar irradiance in real time, with meter scale spatial resolutions over distances of several tens of kilometers (up to 100 km). The technique is based on an optical fiber reflectometry technique (CP-ϕOTDR), which enables real time and long-range high-sensitivity bolometric measurements of solar radiance with a single optical fiber cable and a single interrogator unit. The method is explained and analyzed theoretically. A validation of the method is proposed using a solar simulator irradiating standard optical fibers, where we demonstrate the ability to detect and quantify solar irradiance with less than a 0.1 W/m2 resolution.

Supramolecular Photothermal Effects: A Promising Mechanism for Efficient Thermal Conversion.

Supramolecular assemblies have been very successful in regulating the photothermal conversion efficiency of organic photothermal materials in a simple and flexible way, compared with conventional molecular synthesis. In these assemblies, it is the inherent physiochemical mechanism that determines the photothermal conversion, rather than the assembly strategy. This Minireview summarizes supramolecular photothermal effects, which refer to the unique features of supramolecular chemistry for regulating the photothermal conversion efficiency. Emphasis is placed on the mechanisms of how self-assembly affects the photothermal performance. The supramolecular photothermal effects on various types of light-harvesting species are discussed in detail. The timely interpretation of supramolecular photothermal effects is promising for the future design of the photothermal materials with high efficiency, precision, and multiple functionalities for a wide array of applications.

Determination of temperature distribution in tissue for interstitial cancer photothermal therapy.

BACKGROUND: Temperature increase in tumour tissue during photothermal therapy (PTT) is a significant factor in determining the outcomes of the treatment. Therefore, controlling and optimising temperature distribution in target tissue is crucial for PTT. In this study, we developed a unique ex vivo device to study the temperature distribution during PTT to be used as a guide for the desired photothermal effects for cancer treatment. METHODS: Bovine liver tissue buried inside agarose gel served as a phantom tumour surrounded by normal tissue. A thermostatic incubator was used to simulate tissue environment in live animals. The temperature distributions were measured by thermocouples with needle probes at different locations inside the target tissue, during laser irradiation using an 805-nm laser. RESULTS: The results obtained using the ex vivo device were verified by comparing the tissue temperature directly measured in animal tumours irradiated under the same conditions. With this model, the spatial distribution of temperature in target tissue can be monitored in real time. A two-dimensional temperature distribution in target tissue allows us to establish the correlations among laser parameters, temperature distribution and tumour size. In addition, the optimal temperature range for tumour destruction and immunological stimulation was determined using metastatic rat mammary tumour model. CONCLUSION: The device and method developed in this study can provide guidance for choosing the appropriate treatment parameters for optimal photothermal effects, particularly when combined with immunotherapy, for cancer treatment.

Targeted-gene silencing of BRAF to interrupt BRAF/MEK/ERK pathway synergized photothermal therapeutics for melanoma using a novel FA-GNR-siBRAF nanosystem.

Melanoma is significantly associated with mutant BRAF gene, a suitable target for siRNA-based anti-melanoma therapy. However, a tumor-specific delivery system is a major hurdle for clinical applications. Here, we developed a novel nano-carrier, FA-GNR-siBRAF for safe topical application, which consists of folic acid (FA) as the tumor-targeting moiety, golden nanorods (GNR) providing photothermal capability to kill tumor cells under laser irradiation, and siRNA specifically silencing BRAF (siBRAF). The in vitro and in vivo results revealed that FA-GNR-siBRAF displayed high transfection rates, and subsequently induced remarkable gene knockdown of BRAF, resulting in suppression of melanoma growth due to the interruption of the MEK/ERK pathway. Combinatorial photothermal effects and BRAF knockdown by FA-GNR-siBRAF effectively killed tumor cells through apoptosis, with enhanced efficiency than individual treatments. Therefore, the FA-GNR-siBRAF simultaneously induced BRAF gene silencing and photothermal effects which achieved synergistic efficacy in the treatment of melanoma, paving a new path for developing clinical treatment methods for melanoma.

Gold Nanoparticles as a Photothermal Agent in Cancer Therapy: The Thermal Ablation Characteristic Length.

In cancer therapy, the thermal ablation of diseased cells by embedded nanoparticles is one of the known therapies. It is based on the absorption of the energy of the illuminating laser by nanoparticles. The resulting heating of nanoparticles kills the cell where these photothermal agents are embedded. One of the main constraints of this therapy is preserving the surrounding healthy cells. Therefore, two parameters are of interest. The first one is the thermal ablation characteristic length, which corresponds to an action distance around the nanoparticles for which the temperature exceeds the ablation threshold. This critical geometric parameter is related to the expected conservation of the body temperature in the surroundings of the diseased cell. The second parameter is the temperature that should be reached to achieve active thermal agents. The temperature depends on the power of the illuminating laser, on the size of nanoparticles and on their physical properties. The purpose of this paper is to propose behavior laws under the constraints of both the body temperature at the boundary of the cell to preserve surrounding cells and an acceptable range of temperature in the target cell. The behavior laws are deduced from the finite element method, which is able to model aggregates of nanoparticles. We deduce sensitivities to the laser power and to the particle size. We show that the tuning of the temperature elevation and of the distance of action of a single nanoparticle is not significantly affected by variations of the particle size and of the laser power. Aggregates of nanoparticles are much more efficient, but represent a potential risk to the surrounding cells. Fortunately, by tuning the laser power, the thermal ablation characteristic length can be controlled.

A Rewritable, Reprogrammable, Dual Light-Responsive Polymer Actuator.

We report on the fabrication of a rewritable and reprogrammable dual-photoresponsive liquid crystalline-based actuator containing an azomerocyanine dye that can be locally converted into the hydroxyazopyridinium form by acid treatment. Each dye absorbs at a different wavelength giving access to programmable actuators, the folding of which can be controlled by using different colors of light. The acidic patterning is reversible and allows the erasing and rewriting of patterns in the polymer film, giving access to reusable, adjustable soft actuators.

Superfast Near-Infrared Light-Driven Polymer Multilayer Rockets.

A gold nanoshell-functionalized polymer multilayer nanorocket performs self-propulsion upon the irradiation with NIR light in the absence of chemical fuel. Theoretical simulations reveal that the NIR light-triggered self-thermophoresis drives the propulsion of the nanorocket. The nanorocket also displays -efficient NIR light-triggered propulsion in -biofluids and thus holds considerable promise for various potential biomedical applications.

Single-Layered MoS2-PEI-PEG Nanocomposite-Mediated Gene Delivery Controlled by Photo and Redox Stimuli.

Stimuli-responsive gene delivery systems maximize therapeutic efficacy by controlling the cytosolic conveyance and rate of effective gene release. We present herein a hybrid nanocomposite composed of a 2D nanomaterial, MoS2, modified by attaching two polymers (polyethylenimine (PEI) and polyethylenglycol (PEG)) via disulfide bonds. This MoS2-PEI-PEG nanocomposite interacts with DNA by electrostatic interaction, and accordingly forms a nanosized complex with high stability. Photothermal conversion of MoS2 nanosheet is employed in order to induce photothermally triggered endosomal escape upon the near infrared light irradiation. After endosomal escape, polymers are detached from the MoS2 nanosheet by the intracellular reducing agent, glutathione (GSH), resulting in effective gene release from the nanocomposite. This sequential process initiated by external and internal stimuli remarkably enhances gene delivery efficiency by effective endosomal escape and gene release without severe cytotoxicity. Our rationally designed MoS2 nanocomposite provides a spatiotemporally controllable platform to deliver genetic material into cells.

Evidence of the Disassembly of α-Cyclodextrin-octylamine Inclusion Compounds Conjugated to Gold Nanoparticles via Thermal and Photothermal Effects.

Cyclodextrin (CD) molecules form inclusion compounds (ICs), generating dimers that are capable of encapsulating molecules derived from long-chain hydrocarbons. The aim of this study is to evaluate the structural changes experienced by ICs in solution with increasing temperatures. For this, a nuclear magnetic resonance (¹H-NMR) titration was performed to determinate the stoichiometric α-cyclodextrin (α-CD):octylamine (OA) 2:1 and binding constant (k = 2.16 M-2) of ICs. Solution samples of α-CD-OA ICs conjugated with gold nanoparticles (AuNPs) were prepared, and ¹H-NMR spectra at different temperatures were recorded. Comparatively, ¹H-NMR spectra of the sample irradiated with a laser with tunable wavelengths, with plasmons of conjugated AuNPs, were recorded. In this work, we present evidence of the disassembly of ICs conjugated with AuNPs. Thermal studies demonstrated that, at 114 °C, there are reversible rearrangements of the host and guests in the ICs in a solid state. Migration movements of the guest molecules from the CD cavity were monitored via temperature-dependent ¹H-NMR, and were verified comparing the chemical shifts of octylamine dissolved in deuterated dimethylsulfoxide (DMSO-d6) with the OA molecule included in α-CD dissolved in the same solvent. It was observed that, at 117 °C, OA exited the α-CD cavity. CD IC dimer disassembly was also observed when the sample was irradiated with green laser light.