Observation of Strong Polarization Enhancement in Ferroelectric Tunnel Junctions.

Ferroelectric heterostructures, with capability of storing data at ultrahigh densities, could act as the platform for next-generation memories. The development of new device paradigms has been hampered by the long-standing notion of inevitable ferroelectricity suppression under reduced dimensions. Despite recent experimental observation of stable polarized states in ferroelectric ultrathin films, the out-of-plane polarization components in these films are strongly attenuated compared to thicker films, implying a degradation of device performance in electronic miniaturization processes. Here, in a model system of BiFeO3/La0.7Sr0.3MnO3, we report observation of a dramatic out-of-plane polarization enhancement that occurs with decreasing film thickness. Our electron microscopy analysis coupled with phase-field simulations reveals a polarization-enhancement mechanism that is dominated by the accumulation of oxygen vacancies at interfacial layers. The results shed light on the interplay between polarization and defects in nanoscale ferroelectrics and suggest a route to enhance functionality in oxide devices.

Local Enhancement of Polarization at PbTiO3/BiFeO3 Interfaces Mediated by Charge Transfer.

Ferroelectrics hold promise for sensors, transducers, and telecommunications. With the demand of electronic devices scaling down, they take the form of nanoscale films. However, the polarizations in ultrathin ferroelectric films are usually reduced dramatically due to the depolarization field caused by incomplete charge screening at interfaces, hampering the integrations of ferroelectrics into electric devices. Here, we design and fabricate a ferroelectric/multiferroic PbTiO3/BiFeO3 system, which exhibits discontinuities in both chemical valence and ferroelectric polarization across the interface. Aberration-corrected scanning transmission electron microscopic study reveals an 8% elongation of out-of-plane lattice spacing associated with 104%, 107%, and 39% increments of δTi, δO1, and δO2 in the PbTiO3 layer near the head-to-tail polarized interface, suggesting an over ∼70% enhancement of polarization compared with that of bulk PbTiO3. Besides that in PbTiO3, polarization in the BiFeO3 is also remarkably enhanced. Electron energy loss spectrum and X-ray photoelectron spectroscopy investigations demonstrate the oxygen vacancy accumulation as well as the transfer of Fe3+ to Fe2+ at the interface. On the basis of the polar catastrophe model, FeO2/PbO interface is determined. First-principles calculation manifests that the oxygen vacancy at the interface plays a predominate role in inducing the local polarization enhancement. We propose a charge transfer mechanism that leads to the remarkable polarization increment at the PbTiO3/BiFeO3 interface. This study may facilitate the development of nanoscale ferroelectric devices by tailing the coupling of charge and lattice in oxide heteroepitaxy.

Polarization enhancement technique for nuclear quadrupole resonance detection.

We demonstrate a dramatic increase in the signal-to-noise ratio (SNR) of a nuclear quadrupole resonance (NQR) signal by using a polarization enhancement technique. By first applying a static magnetic field to pre-polarize one spin subsystem of a material, and then allowing that net polarization to be transferred to the quadrupole subsystem, we increased the SNR of a sample of ammonium nitrate by one-order of magnitude.

Solid-State NMR Spectroscopy: Towards Structural Insights into Starch-Based Materials in the Food Industry.

Solid-state NMR is a nondestructive and noninvasive technique used to study the chemical structure and dynamics of starch-based materials and to bridge the gap between structure-function relationships and industrial applications. The study of crystallinity, chemical modification, product blending, molecular packing, amylose-amylopectin ratio, end chain motion, and solvent-matrix interactions is essential for tailoring starch product properties to various applications. This article aims to provide a comprehensive and critical review of research characterizing starch-based materials using solid-state NMR, and to briefly introduce the most advanced and promising NMR strategies and hardware designs used to overcome the sensitivity and resolution issues involved in structure-function relationships.

Achieving Ultrahigh Energy-Storage Density with Excellent Thermal Stability in Sr0.7Bi0.2TiO3-Based Relaxors via Polarization Behavior Modulation.

Dielectric capacitors possessing the inherent superiorities of high power density and ultrafast charge-discharge speed make their utilization in energy-storage devices extremely propitious, although the relatively low recoverable energy-storage density (Wrec) may impede their applications. In this work, unlike the mainstream approach of destroying long-range ferroelectric/antiferroelectric order and inducing relaxor properties to achieve a high Wrec value, we have selected end members with a high polarization gene to promote the polarization behavior of the typical relaxor Sr0.7Bi0.2TiO3. Therefore, an ultrahigh Wrec ∼ 8 J/cm3 and a superior efficiency (η) ∼ 91% are accomplished in the 0.98[0.56(Sr0.7Bi0.2)TiO3-0.44(Bi0.5Na0.5)TiO3]-0.02 Bi(Mg0.5Ti0.5)O3 sample. The achieved Wrec value is record high in Sr0.7Bi0.2TiO3-based systems as far as we know. The polarization-enhancement behavior can be explained by the phase field simulation results, phase content variance in X-ray diffraction Rietveld refinement, hardening trend in Raman spectroscopy, domain morphology, and local symmetry in transmission electron microscope analysis. Meanwhile, the ceramic possesses excellent thermal stability (ΔWrec < 12.7% and Δη < 10.4%, -50-200 °C), frequency (ΔWrec < 2.69% and Δη < 2.06%, 0.5-500 Hz), and fatigue-resistant stability (ΔWrec < 0.08% and Δη < 0.2%, up to 1 × 105 cycles). Accordingly, this work proposes a design idea to tailor the polarization behavior and energy-storage properties of typical relaxors.

Solid State NMR Spectroscopy a Valuable Technique for Structural Insights of Advanced Thin Film Materials: A Review.

Solid-state NMR has proven to be a versatile technique for studying the chemical structure, 3D structure and dynamics of all sorts of chemical compounds. In nanotechnology and particularly in thin films, the study of chemical modification, molecular packing, end chain motion, distance determination and solvent-matrix interactions is essential for controlling the final product properties and applications. Despite its atomic-level research capabilities and recent technical advancements, solid-state NMR is still lacking behind other spectroscopic techniques in the field of thin films due to the underestimation of NMR capabilities, availability, great variety of nuclei and pulse sequences, lack of sensitivity for quadrupole nuclei and time-consuming experiments. This article will comprehensively and critically review the work done by solid-state NMR on different types of thin films and the most advanced NMR strategies, which are beyond conventional, and the hardware design used to overcome the technical issues in thin-film research.

Perspectives on high-field and solid-state NMR methods of quadrupole nuclei.

High magnetic field can dramatically increase the spectral resolution and sensitivity of quadrupole nuclei S > 1/2 by the reduction of the second-order quadrupole broadening. A brief overview and outlook on spectral acquisition, the importance of high magnetic field, inter-nuclei distance measurement, various 2D separation and correlation methods of quadrupole nuclei are presented. The complications and consequences of spin dynamics under rf irradiation for the (2S + 1) level system and level-crossing with the satellite transition frequencies under magic-angle spinning are discussed. There is a scaling down of (S + 1/2) to the efficiency of many experiments in comparison with a spin-1/2 due to the fact that only two central transition spin states out of the (2S + 1) levels contribute to polarization transfer and spin correlation.

Multiple strains and polar states in PbZr0.52Ti0.48O3/PbTiO3 superlattices revealed by aberration-corrected HAADF-STEM imaging.

Tuning multiple strain and polar states of ferroelectrics by using strain engineering is an essential approach for designing multifunctional electric devices such as multiple state memories. However, integrating multiple strain states is still a challenge, and in addition, revealing such strains and the resultant polar behaviors on the atomic level remains difficult. In this work we prepare PbZr0.52Ti0.48O3/PbTiO3 (PZT/PTO) superlattices on SrRuO3-buffered SrTiO3(001) substrates. Aberration-corrected high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) reveals that the superlattice is coherent in both c (out-of-plane polar direction) and a (in-plane polar direction) domains. We find that the strain states of both PZT and PTO in c and a domains are variant, leading to four special strain states. For example, the tetragonality for PTO in c and a domains is 1.061 and 1.045, respectively. In contrast, PZT in c domains displays a tetragonality as giant as 1.107, which corresponds to 110 µC cm-2 spontaneous polarization, much larger than the bulk PZT; while PZT in a domains exhibits 1.010 tetragonality with about 70 µC cm-2 polarization. This study reveals a practical way to integrate multiple strain states and enhanced polarizations in ferroelectric films, which could be used as multifunctional electric elements.

Giant Polarization Sustainability in Ultrathin Ferroelectric Films Stabilized by Charge Transfer.

Ferroelectricity is generally deteriorated or even vanishes when the ferroelectric films are downsized to unit cell scale. To maintain and enhance the polarization in nanoscale ferroelectrics are of scientific and technological importance. Here, giant polarization sustainability is reported in a series of ultrathin PbTiO3 films scaled down to three unit cells grown on NdGaO3 (110) substrates with La0.7 Sr0.3 MnO3 as bottom electrodes. Atomic mappings via aberration-corrected scanning transmission electron microscopy demonstrate the robust ferroelectricity for the sub-10 nm thick film. For the 1.2 nm thick film, the polarization reaches ≈50 µC cm-2 . The 2 nm thick film possesses a polarization as high as the bulk value. The films ranging from 10 to 35 nm display a giant elongation of out-of-plane lattice parameter, which corresponds to a polarization of 100 µC cm-2 , 20% larger than that of the bulk PbTiO3 . The giant enhancement of polarization in the present films is proposed to result from the charge transfer at the La0.7 Sr0.3 MnO3 /PbTiO3 interface, as supported by the anomalous decrease of Mn valence measured from X-ray photoelectron spectroscopy. These results reveal the significant role of charge transfer at interfaces in improving large polarizations in ultrathin ferroelectrics and are meaningful for the development of future electronic devices.

SPIDYAN, a MATLAB library for simulating pulse EPR experiments with arbitrary waveform excitation.

Frequency-swept chirp pulses, created with arbitrary waveform generators (AWGs), can achieve inversion over a range of several hundreds of MHz. Such passage pulses provide defined flip angles and increase sensitivity. The fact that spectra are not excited at once, but single transitions are passed one after another, can cause new effects in established pulse EPR sequences. We developed a MATLAB library for simulation of pulse EPR, which is especially suited for modeling spin dynamics in ultra-wideband (UWB) EPR experiments, but can also be used for other experiments and NMR. At present the command line controlled SPin DYnamics ANalysis (SPIDYAN) package supports one-spin and two-spin systems with arbitrary spin quantum numbers. By providing the program with appropriate spin operators and Hamiltonian matrices any spin system is accessible, with limits set only by available memory and computation time. Any pulse sequence using rectangular and linearly or variable-rate frequency-swept chirp pulses, including phase cycling can be quickly created. To keep track of spin evolution the user can choose from a vast variety of detection operators, including transition selective operators. If relaxation effects can be neglected, the program solves the Liouville-von Neumann equation and propagates spin density matrices. In the other cases SPIDYAN uses the quantum mechanical master equation and Liouvillians for propagation. In order to consider the resonator response function, which on the scale of UWB excitation limits bandwidth, the program includes a simple RLC circuit model. Another subroutine can compute waveforms that, for a given resonator, maintain a constant critical adiabaticity factor over the excitation band. Computational efficiency is enhanced by precomputing propagator lookup tables for the whole set of AWG output levels. The features of the software library are discussed and demonstrated with spin-echo and population transfer simulations.