Assessing residential PM2.5 concentrations and infiltration factors with high spatiotemporal resolution using crowdsourced sensors.

Building conditions, outdoor climate, and human behavior influence residential concentrations of fine particulate matter (PM2.5). To study PM2.5 spatiotemporal variability in residences, we acquired paired indoor and outdoor PM2.5 measurements at 3,977 residences across the United States totaling >10,000 monitor-years of time-resolved data (10-min resolution) from the PurpleAir network. Time-series analysis and statistical modeling apportioned residential PM2.5 concentrations to outdoor sources (median residential contribution = 52% of total, coefficient of variation = 69%), episodic indoor emission events such as cooking (28%, CV = 210%) and persistent indoor sources (20%, CV = 112%). Residences in the temperate marine climate zone experienced higher infiltration factors, consistent with expectations for more time with open windows in milder climates. Likewise, for all climate zones, infiltration factors were highest in summer and lowest in winter, decreasing by approximately half in most climate zones. Large outdoor-indoor temperature differences were associated with lower infiltration factors, suggesting particle losses from active filtration occurred during heating and cooling. Absolute contributions from both outdoor and indoor sources increased during wildfire events. Infiltration factors decreased during periods of high outdoor PM2.5, such as during wildfires, reducing potential exposures from outdoor-origin particles but increasing potential exposures to indoor-origin particles. Time-of-day analysis reveals that episodic emission events are most frequent during mealtimes as well as on holidays (Thanksgiving and Christmas), indicating that cooking-related activities are a strong episodic emission source of indoor PM2.5 in monitored residences.

Formaldehyde Exposure Racial Disparities in Southeast Texas.

Formaldehyde (HCHO) exposures during a full year were calculated for different race/ethnicity groups living in Southeast Texas using a chemical transport model tagged to track nine emission categories. Petroleum and industrial emissions were the largest anthropogenic sources of HCHO exposure in Southeast Texas, accounting for 44% of the total HCHO population exposure. Approximately 50% of the HCHO exposures associated with petroleum and industrial sources were directly emitted (primary), while the other 50% formed in the atmosphere (secondary) from precursor emissions of reactive compounds such as ethylene and propylene. Biogenic emissions also formed secondary HCHO that accounted for 11% of the total population-weighted exposure across the study domain. Off-road equipment contributed 3.7% to total population-weighted exposure in Houston, while natural gas combustion contributed 5% in Beaumont. Mobile sources accounted for 3.7% of the total HCHO population exposure, with less than 10% secondary contribution. Exposure disparity patterns changed with the location. Hispanic and Latino residents were exposed to HCHO concentrations +1.75% above average in Houston due to petroleum and industrial sources and natural gas sources. Black and African American residents in Beaumont were exposed to HCHO concentrations +7% above average due to petroleum and industrial sources, off-road equipment, and food cooking. Asian residents in Beaumont were exposed to HCHO concentrations that were +2.5% above average due to HCHO associated with petroleum and industrial sources, off-road vehicles, and food cooking. White residents were exposed to below average HCHO concentrations in all domains because their homes were located further from primary HCHO emission sources. Given the unique features of the exposure disparities in each region, tailored solutions should be developed by local stakeholders. Potential options to consider in the development of those solutions include modifying processes to reduce emissions, installing control equipment to capture emissions, or increasing the distance between industrial sources and residential neighborhoods.

Increase in Agricultural-Derived NHx and Decrease in Coal Combustion-Derived NOx Result in Atmospheric Particulate N-NH4+ Surpassing N-NO3- in the South China Sea.

The atmospheric deposition of anthropogenic active nitrogen significantly influences marine primary productivity and contributes to eutrophication. The form of nitrogen deposition has been evolving annually, alongside changes in human activities. A disparity arises between observation results and simulation conclusions due to the limited field observation and research in the ocean. To address this gap, our study undertook three field cruises in the South China Sea in 2021, the largest marginal sea of China. The objective was to investigate the latest atmospheric particulate inorganic nitrogen deposition pattern and changes in nitrogen sources, employing nitrogen-stable isotopes of nitrate (δ15N-NO3-) and ammonia (δ15N-NH4+) linked to a mixing model. The findings reveal that the N-NH4+ deposition generally surpasses N-NO3- deposition, attributed to a decline in the level of NOx emission from coal combustion and an upswing in the level of NHx emission from agricultural sources. The disparity in deposition between N-NH4+ and N-NO3- intensifies from the coast to the offshore, establishing N-NH4+ as the primary contributor to oceanic nitrogen deposition, particularly in ocean background regions. Fertilizer (33 ± 21%) and livestock (20 ± 6%) emerge as the primary sources of N-NH4+. While coal combustion continues to be a significant contributor to marine atmospheric N-NO3-, its proportion has diminished to 22 (Northern Coast)-35% (background area) due to effective NOx emission controls by the countries surrounding the South China Sea, especially the Chinese Government. As coal combustion's contribution dwindles, the significance of vessel and marine biogenic emissions grows. The daytime higher atmospheric N-NO3- concentration and lower δ15N-NO3- compared with nighttime further underscore the substantial role of marine biogenic emissions.

Stable Carbon Isotope Signatures of Carbonaceous Aerosol Endmembers in the Tibetan Plateau.

Carbonaceous aerosols play an important role in radiative forcing in the remote and climate-sensitive Tibetan Plateau (TP). However, the sources of carbonaceous aerosols to the TP remain poorly defined, in part due to the lack of regionally relevant data about the sources of carbonaceous aerosols. To address this knowledge gap, we present the first comprehensive analysis of the δ13C signatures of carbonaceous aerosol endmembers local to the TP, encompassing total carbon, water-insoluble particle carbon, and elemental carbon originating from fossil fuel combustion, biomass combustion, and topsoil. The δ13C signatures of these local carbonaceous endmembers differ from components collected in other regions of the world. For instance, fossil fuel-derived aerosols from the TP were 13C-depleted relative to fossil fuel-derived aerosols reported in other regions, while biomass fuel-derived aerosols from the TP were 13C-enriched relative to biomass fuel-derived aerosols reported in other regions. The δ13C values of fine-particle topsoil in the TP were related to regional variations in vegetation type. These findings enhance our understanding of the unique features of carbonaceous aerosols in the TP and aid in accurate source apportionment and environmental assessments of carbonaceous aerosols in this climate-sensitive region.

The "Microplastome" - A Holistic Perspective to Capture the Real-World Ecology of Microplastics.

Microplastic pollution, an emerging pollution issue, has become a significant environmental concern globally due to its ubiquitous, persistent, complex, toxic, and ever-increasing nature. As a multifaceted and diverse suite of small plastic particles with different physicochemical properties and associated matters such as absorbed chemicals and microbes, future research on microplastics will need to comprehensively consider their multidimensional attributes. Here, we introduce a novel, conceptual framework of the "microplastome", defined as the entirety of various plastic particles (<5 mm), and their associated matters such as chemicals and microbes, found within a sample and its overall environmental and toxicological impacts. As a novel concept, this paper aims to emphasize and call for a collective quantification and characterization of microplastics and for a more holistic understanding regarding the differences, connections, and effects of microplastics in different biotic and abiotic ecosystem compartments. Deriving from this lens, we present our insights and prospective trajectories for characterization, risk assessment, and source apportionment of microplastics. We hope this new paradigm can guide and propel microplastic research toward a more holistic era and contribute to an informed strategy for combating this globally important environmental pollution issue.

Significant Increase in Ammonia Emissions in China: Considering Nonagricultural Sectors Based on Isotopic Source Apportionment.

Isotopic source apportionment results revealed that nonagricultural sectors are significant sources of ammonia (NH3) emissions, particularly in urban areas. Unfortunately, nonagricultural sources have been substantially underrepresented in the current anthropogenic NH3 emission inventories (EIs). Here, we propose a novel approach to develop a gridded EI of nonagricultural NH3 in China for 2016 using a combination of isotopic source apportionment results and the emission ratios of carbon monoxide (CO) and NH3. We estimated that isotope-corrected nonagricultural NH3 emissions were 4370 Gg in China in 2016, accounting for an increase in the total NH3 emissions from 7 to 31%. As a result, compared to the original NH3 EI, the annual emissions of total NH3 increased by 35%. Thus, in comparison to the simulation driven by the original NH3 EI, the WRF-Chem model driven by the isotope-corrected NH3 EI has reduced the model biases in the surface concentrations and dry deposition flux of reduced nitrogen (NHx = gaseous NH3 + particulate NH4+) by 23 and 31%, respectively. This study may have wide-ranging implications for formulating targeted strategies for nonagricultural NH3 emissions controls, making it facilitate the achievement of simultaneously alleviating nitrogen deposition and atmospheric pollution in the future.

Tire Wear Chemicals in the Urban Atmosphere: Significant Contributions of Tire Wear Particles to PM2.5.

Tire wear particles (TWPs) containing tire wear chemicals (TWCs) are of global concern due to their large emissions and potential toxicity. However, TWP contributions to urban fine particles are poorly understood. Here, 72 paired gas-phase and PM2.5 samples were collected in the urban air of the Pearl River Delta, China. The concentrations of 54 compounds were determined, and 28 TWCs were detected with total concentrations of 3130-317,000 pg/m3. Most p-phenylenediamines (PPDs) were unstable in solvent, likely leading to their low detection rates. The TWCs were mainly (73 ± 26%) in the gas phase. 2-OH-benzothiazole contributed 82 ± 21% of the gas-phase TWCs and benzothiazole-2-sulfonic acid contributed 74 ± 18% of the TWCs in PM2.5. Guangzhou and Foshan were "hotspots" for atmospheric TWCs. Most TWC concentrations significantly correlated with the road length nearby. More particulate TWCs were observed than model predictions, probably due to the impacts of nonexchangeable portion and sampling artifacts. Source apportionment combined with characteristic molecular markers indicated that TWPs contributed 13 ± 7% of urban PM2.5. Our study demonstrates that TWPs are important contributors to urban air pollution that could pose risks to humans. There is an urgent need to develop strategies to decrease TWP emissions, along with broader urban air quality improvement strategies.

Dominant Contribution of Non-dust Primary Emissions and Secondary Processes to Dissolved Aerosol Iron.

Solubility largely determines the impacts of aerosol Fe on marine ecosystems and human health. Currently, modeling studies have large uncertainties in aerosol Fe solubility due to inadequate understanding of the sources of dissolved Fe. This work investigated seasonal variations of Fe solubility in coarse and fine aerosols in Qingdao, a coastal city in the Northwest Pacific, and utilized a receptor model for source apportionment of total and dissolved aerosol Fe. Desert dust was found to be the main source of total Fe, contributing 65 and 81% annually to total Fe in coarse and fine particles, respectively; in contrast, dissolved aerosol Fe originated primarily from combustion, industrial, and secondary sources. The annual average contributions to dissolved Fe in coarse and fine particles were 68 and 47% for the secondary source and 32 and 33% for the combustion source, respectively. Aerosol Fe solubility was found to be highest in summer and lowest in spring, showing seasonal patterns similar to those of aerosol acidity. Increase in Fe solubility in atmospheric particles, when compared to desert dust, was mainly caused by secondary processing and combustion emission, and the effect of secondary processes was dictated by aerosol acidity and liquid water content.

Large Seasonal Variation in Nitrogen Isotopic Abundances of Ammonia Volatilized from a Cropland Ecosystem and Implications for Regional NH3 Source Partitioning.

Ammonia (NH3) volatilization from agricultural lands is a main source of atmospheric reduced nitrogen species (NHx). Accurately quantifying its contribution to regional atmospheric NHx deposition is critical for controlling regional air nitrogen pollution. The stable nitrogen isotope composition (expressed by δ15N) is a promising indicator to trace atmospheric NHx sources, presupposing a reliable nitrogen isotopic signature of NH3 emission sources. To obtain more specific seasonal δ15N values of soil NH3 volatilization for reliable regional seasonal NH3 source partitioning, we utilized an active dynamic sampling technique to measure the δ15N-NH3 values volatilized from maize cropping land in northeast China. These values varied from -38.0 to -0.2‰, with a significantly lower rate-weighted value observed in the early period (May-June, -30.5 ± 6.7‰) as compared with the late period (July-October, -8.5 ± 4.3‰). Seasonal δ15N-NH3 variations were related to the main NH3 production pathway, degree of soil ammonium consumption, and soil environment. Bayesian isotope mixing model analysis revealed that without considering the seasonal δ15N variation in soil-volatilized NH3 could result in an overestimate by up to absolute 38% for agricultural volatile NH3 to regional atmospheric bulk ammonium deposition during July-October, further demonstrating that it is essential to distinguish seasonal δ15N profile of agricultural volatile NH3 in regional source apportionment.

Application of Nontarget High-Resolution Mass Spectrometry Fingerprints for Qualitative and Quantitative Source Apportionment: A Real Case Study.

High-resolution mass spectrometry (HRMS) provides extensive chemical data, facilitating the differentiation and quantification of contaminants of emerging concerns (CECs) in aquatic environments. This study utilizes liquid chromatography-HRMS for source apportionment in Chebei Stream, an urban water stream in Guangzhou, South China. Initially, 254 features were identified as potential CECs by the nontarget screening (NTS) method. We then established 1689, 1317, and 15,759 source-specific HRMS fingerprints for three distinct sources, the mainstream (C3), the tributary (T2), and the rain runoff (R1), qualitatively assessing the contribution from each source downstream. Subsequently, 32, 55, and 3142 quantitative fingerprints were isolated for sites C3, T2, and R1, respectively, employing dilution curve screening for source attribution. The final contribution estimates downstream from sites C3, T2, and R1 span 32-96, 12-23, and 8-23%, respectively. Cumulative contributions from these sources accurately mirrored actual conditions, fluctuating between 103 and 114% across C6 to C8 sites. Yet, with further tributary integration, the overall source contribution dipped to 52%. The findings from this research present a pioneering instance of applying HRMS fingerprints for qualitative and quantitative source tracking in real-world scenarios, which empowers the development of more effective strategies for environmental protection.

Nationwide Investigation on Organophosphate Flame Retardants in Tea from China: Migration from Packaging Materials and Implications for Global Risk Assessment.

In this study, we measured 15 common organophosphate flame retardants (OPFRs) in six categories of tea samples across China. OPFRs were found in all the tea samples, with the total concentrations of OPFRs (∑OPFRs) at 3.44-432 ng/g [geometric mean (GM): 17.6 ng/g]. Triphenyl phosphate (TPhP) was the dominant OPFR, accounting for 39.0-76.2% of ∑OPFRs across all tea categories. The potential factors influencing the residual OPFRs in tea were thoroughly examined, including the agricultural environment, fermentation, and packaging of teas. Tea packaging materials (TPMs) were then identified as the primary sources of OPFRs in teas. The migration test revealed that OPFRs with lower molecular weights and log Kow values exhibited a higher propensity for facilitating the migration of OPFRs from TPMs to teas. The estimated daily intakes of OPFRs from teas were relatively higher for the general populations in Mauritania, Gambia, Togo, Morocco, and Senegal (3.18-9.79 ng/kg bw/day) than China (3.12 ng/kg bw/day). The health risks arising from OPFRs in Chinese teas were minor. This study established a baseline concentration and demonstrated the contamination sources of OPFRs in Chinese tea for the first time, with an emphasis on enhancing the hygiene standards for TPMs.

Atmospheric Mercury Concentrations and Isotopic Compositions Impacted by Typical Anthropogenic Mercury Emissions Sources.

Coal-fired power plants (CFPPs) and cement plants (CPs) are important anthropogenic mercury (Hg) emission sources. Mercury speciation profiles in flue gas are different among these sources, leading to significant variations in local atmospheric Hg deposition. To quantify the impacts of Hg emissions from CFPPs and CPs on local-scale atmospheric Hg deposition, this study determined concentrations and isotopes of ambient gaseous elemental mercury (GEM), particulate-bound mercury (PBM), and precipitation total Hg (THg) at multiple locations with different distances away from a CFPP and a CP. Higher concentrations of GEM and precipitation THg in the CFPP area in summer were caused by higher Hg emission from the CFPP, resulting from higher electricity demand. Higher concentrations of GEM, PBM, and precipitation THg in the CP area in winter compared to those in summer were related to the higher output of cement. Atmospheric Hg concentration peaked near the CFPP and CP and decreased with distance from the plants. Elevated GEM concentration in the CFPP area was due to flue gas Hg0 emissions, and high PBM and precipitation Hg concentrations in the CP area were attributed to divalent Hg emissions. It was estimated that Hg emissions from the CFPP contributed 58.3 ± 20.9 and 52.3 ± 25.9% to local GEM and PBM, respectively, and those from the CP contributed 47.0 ± 16.7 and 60.0 ± 25.9% to local GEM and PBM, respectively. This study demonstrates that speciated Hg from anthropogenic emissions posed distinct impacts on the local atmospheric Hg cycle, indicating that Hg speciation profiles from these sources should be considered for evaluating the effectiveness of emission reduction policies. This study also highlights the Hg isotope as a useful tool for monitoring environmental Hg emissions.

Fossil and Nonfossil Sources of Winter Organic Aerosols in the Regional Background Atmosphere of China.

Carbonaceous aerosols (CA) from anthropogenic emissions have been significantly reduced in urban China in recent years. However, the relative contributions of fossil and nonfossil sources to CA in rural and background regions of China remain unclear. In this study, the sources of different carbonaceous fractions in fine aerosols (PM2.5) from five background sites of the China Meteorological Administration Atmosphere Watch Network during the winter of 2019 and 2020 were quantified using radiocarbon (14C) and organic markers. The results showed that nonfossil sources contributed 44-69% to total carbon at these five background sites. Fossil fuel combustion was the predominant source of elemental carbon at all sites (73 ± 12%). Nonfossil sources dominated organic carbon (OC) in these background regions (61 ± 13%), with biomass burning or biogenic-derived secondary organic carbon (SOC) as the most important contributors. However, the relative fossil fuel source to OC in China (39 ± 13%) still exceeds those at other regional/background sites in Asia, Europe, and the USA. SOC dominated the fossil fuel-derived OC, highlighting the impact of regional transport from anthropogenic sources on background aerosol levels. It is therefore imperative to develop and implement aerosol reduction policies and technologies tailored to both the anthropogenic and biogenic emissions to mitigate the environmental and health risks of aerosol pollution across China.

Different "nongrain" activities affect the accumulation of heavy metals and their source-oriented health risks on cultivated lands.

"Nongrain" production on cultivated land is one of the primary environmental issues in China. Different "nongrain" activities may introduce different pollution sources to the local environment, leading to variations in heavy metal contents in soil, which can profoundly impact national food security. In this study, three typical "nongrain" regions (Nanxun (NX), Xiaoshan (XS) and Lin'an (LA)) with intensive aquaculture, tea planting and flower (seedling) growth on cultivated land around the Hangzhou metropolitan area were selected to address the spatial heterogeneity of accumulation levels, sources and source-oriented health risks of heavy metals in soil. The results showed that Hg was the main pollutant in NX and XS, while Cd and As were the major contaminants in LA. Aquiculture and sericultural industries (37.43%), natural sources (23.59%) and industrial activities (38.99%) were the major sources in NX; atmospheric deposition (37.73%), flower and seedling planting (23.49%) and metal-related industries (35.16%) were the major sources in XS; and atmospheric deposition (28.06%), excessive application of fertilizers and pesticides during tea planting (43.47%) and natural sources (28.47%) were the major sources in LA. The major risk population, area, exposure route and hazardous elements were children, LA, ingestion and As and Cr, respectively. From the perspective of source-based health risk assessment, in addition to natural sources that are difficult to intervene in, industrial activities, especially leather and wood process industries, metal-related industries and excessive fertilizer and pesticide application during tea planting contributed the most to the total health risk, which explained 67%, 41% and 42%, respectively, of the total risk in NX, XS and LA. High health risks are present in sources with heavy loadings of hazardous heavy metals (As and Cr); thus, to protect human health, the corresponding high-risk anthropogenic pollution sources in different "nongrain" areas need to be controlled.

Occurrence characteristics, environmental trend, and source analysis of polycyclic aromatic hydrocarbons in the water environment of industrial zones.

The middle reaches of the Yellow River are rich in energy resources, with the Kuye River, a first-class river in this region, serving as a vital hub for the coal chemical industry within China. This study investigated the occurrence patterns, environmental trends, and ecological risks associated with polycyclic aromatic hydrocarbons (PAHs) in the Kuye River Basin, offering insights into the environmental dynamics of regions. The findings indicated that the river sediments primarily contained PAHs with medium to high-molecular weights, exhibiting levels ranging from 402.92 ng/g dw to 16,783.72 ng/g dw, while water bodies predominantly featured PAHs with low to medium molecular weights, ranging from 299.34 ng/L to 10,930.9 ng/L. The source analysis of PAHs indicated that industrial and traffic exhaust emissions were the primary contributors to PAHs in the Kuye basin, with sediments serving as a secondary release source based on fugacity fraction. The content of PAHs in sediment correlated closely with the environmental factors, and the PAHs inventory of the basin was 19.97 tons. The increased overall PAH concentration in the basin posed significant ecological and public health concerns, necessitating urgent attention.

Polycyclic aromatic hydrocarbons (PAHs) in blood serum of adults living in high and low-traffic volume areas in Malaysia: A comparative cross-sectional study.

Ambient polycyclic aromatic hydrocarbons (PAHs) originate predominantly from fuel combustion of motor vehicles and have the potential to affect human health. However, there is insufficient knowledge regarding serum PAHs health risks among the Malaysian population. This study aims to compare PAH concentrations, distributions, correlations, and health risks in 202 blood serum samples drawn from residents living in high-traffic volume areas (Kuala Lumpur) and low-traffic volume areas (Hulu Langat) in Malaysia. Solid phase extraction and gas chromatography-mass spectrometry (GC-MS) were employed to extract and analyze blood serum samples. Questionnaires were distributed to obtain sociodemographic and contributing factors of serum PAHs. The mean total PAHs concentration in serum of the Kuala Lumpur group was 54.44 ng g-1 lipids, double the Hulu Langat group's concentration (25.7 ng g-1 lipids). Indeno(1,2,3-cd)pyrene (IcP) and acenaphthene (ACP) feature the most and least abundant compounds in both study groups. The mean concentrations of IcP and ACP in the Kuala Lumpur and Hulu Langat groups were 26.8 vs 12.68 and 0.27 vs 0.14 ng g-1 lipids, respectively. High-molecular-weight PAHs (HMW-PAHs) composed 85% of serum total PAHs in both groups. Significant correlations were found (i) between the individual serum PAH congeners (p < 0.01) and (ii) between serum PAHs and total lipids (p < 0.01). According to the questionnaire data, high traffic volume and outdoor hobbies were the only contributory factors that confirmed significant relationships with serum PAHs (p < 0.001). Health risk assessment was computed using benzo(a)pyrene (BaP) equivalent (BaPeq) and demonstrated that the Kuala Lumpur group has twofold greater carcinogenic risk than the Hulu Langat group (16.11 vs 7.76 ng g-1 lipids). Our study reveals that traffic volumes notably impact serum PAH levels and general health among the Malaysian population.

Identification of toxic metal contamination in surface sediments of the Xiaoqing River under a long-term perspective (1996-2020): Risks, sources and driving factors.

The contamination of sediments by toxic metals poses a significant threat to both river ecosystems and human health. In this study, the geo-accumulation index (Igeo), biotoxicity evaluation method, and potential ecological risk index (RI) were employed to analyze the contamination level, biotoxicity risk, and potential ecological risk of toxic metals in surface sediments of the Xiaoqing River. To identify toxic metal sources, Spearman correlation and principal component analysis with multiple linear regression analysis (PCA-MLR) were employed. Additionally, redundancy analysis (RDA) was utilized to investigate potential driving factors affecting toxic metal accumulation in sediments. The results revealed that the levels of the five investigated metals (Cr, Pb, As, Hg, and Cd) showed constant fluctuations during the period 1996-2020. The midstream was found to be more polluted than the upstream and downstream. In the research area, Hg was identified as the primary contaminant with high levels of contamination, posing a biotoxicity risk and potential ecological risk. Pollution sources were identified for two periods: A (1996-2010) and B (2011-2020), with industrial, agricultural, traffic, and natural sources being the main contributors. During period A, industrial sources accounted for the highest proportion (40.8%), followed by agricultural sources (36.6%), and geological natural sources (22.6%). During period B, agricultural sources accounted for the highest proportion (42%), followed by industrial and traffic sources (32.4%), and geological natural sources (25.6%). The distribution of toxic metals in the basin was significantly influenced by water pH, sediment organic matter, population density, and per capita GDP. The study results provide fundamental data for preventing pollution and managing water resources contaminated with toxic metals in the sediments of the Xiaoqing River in Jinan. Additionally, it serves as a reference for analyzing related ecological and environmental issues in the basin.

Distribution, source apportionment, and ecological risk assessment of soil antibiotic resistance genes in urban green spaces.

Urban green spaces play a crucial role in cities by providing near-natural environments that greatly impacts the health of residents. However, these green spaces have recently been scrutinized as potential reservoirs of antibiotic resistance genes (ARGs), posing significant ecological risks. Despite this concern, our understanding of the distribution, sources, and ecological risks associated with ARGs remains limited. In this study, we investigated the spatial distribution of soil ARGs using spatial interpolation and auto-correlation analysis. To apportion the source of soil ARGs in urban green spaces of Tianjin, Geo-detector method (GDM) was employed. Furthermore, we evaluated the ecological risk posed by ARGs employing risk quotients (RQ). The results of our study showed a significantly higher abundance of Quinolone resistance genes in the soil of urban green spaces in Tianjin. These genes were mainly found in the northwest, central, and eastern regions of the city. Our investigation identified three main factors contributing to the presence of soil ARGs: antibiotic production, precipitation, livestock breeding, and hospital. The results of ecological risk in RQ value showed a high risk associated with Quinolone resistance genes, followed by Aminoglycoside, Tetracycline, Multidrug, MLSB, Beta Lactam, Sulfonamide, and Chloramphenicol. Mantel-test and correlation analysis revealed that the ecological risk of ARGs was greatly influenced by soil properties and heavy metals. This study provides a new perspective on source apportionment and the ecological risk assessment of soil ARGs in urban green spaces.

Health risk assessment of soil heavy metals in a typical mining town in north China based on Monte Carlo simulation coupled with Positive matrix factorization model.

The accumulation of heavy metals (HMs) in soil caused by mineral resource exploitation and its ancillary industrial processes poses a threat to ecology and public health. Effective risk control measures require a quantification of the impacts and contributions to health risks from individual sources of soil HMs. Based on high-density sampling, soil contamination risk indexes, positive matrix factorization (PMF) model, Monte Carlo simulation and human health risk analysis model were applied to investigate the risk of HMs in a typical mining town in North China. The results showed that As was the most dominant soil pollutant factor, Cd and Hg were the most dominant soil ecological risk factors, and Cr and Ni were the most dominant health risk factors in the study area. Overall, both pollution and ecological risks were at low levels, while there were still some higher hazard areas located in the central and south-central part of the region. According to the probabilistic health risk assessment (HRA), children suffered greater health risks than adults, with 21.63% of non-carcinogenic risks and 53.24% of carcinogenic risks exceeding the prescribed thresholds (HI > 1 and TCR>1E-4). The PMF model identified five potential sources: fuel combustion (FC), processing of building materials with limestone as raw materials (PBML), industry source (IS), iron ore mining combined with garbage (IOG), and agriculture source (AS). PBML is the primary source of soil HM contamination, as well as the major anthropogenic source of carcinogenic risk for all populations. Agricultural inputs associated with As are the major source of non-carcinogenic risk. This study offers a good example of probabilistic HRA using specific sources, which can provide a valuable reference for strategy establishment of pollution remediation and risk prevention and control.

Source apportionment of soil PTE in a northern industrial county using PMF model: Partitioning strategies and uncertainty analysis.

Positive matrix factorization (PMF) has commonly been applied for source apportionment of potentially toxic elements (PTE) in agricultural soil, however, spatial heterogeneity of PTE significantly undermines the accuracy and reliability of PMF results. In this study, a representative industrial-agricultural hub in North China (Xuanhua district, Zhangjiakou City) was selected as the research subject, multiple partition processing (PP) strategies and uncertainty analyses were integrated to advance the PMF modeling and associated algorithm mechanisms were comparatively discussed. Specifically, we adopted three methods to split the research area into several subzones according to industrial density (PP-1), population density (PP-2), and the ecological risk index (PP-3) respectively, to rectify the spatial bias phenomenon of PTE concentrations and to achieve a more interpretable result. Our results indicated that the obvious enrichment of Cd, Pb, and Zn was found in the agricultural soil, with Hg and Cd accounted for 83.49% of the overall potential ecological risk. Combining proper PP with PMF can significantly improve the modelling accuracy. Uncertainty analysis showed that interval ratios of tracer species (Cd, Pb, Hg, and Zn) calculated by PP-3 were consistently lower than that of PP-1 and PP-2, indicating that PP-3 coupled PMF can afford the optimal modeling results. It suggested that natural sources, fertilizers and pesticides, atmosphere deposition, mining, and smelting were recognized as the major contributor for the soil PTE contamination. The contribution of anthropogenic activities, specifically fertilizers and pesticides, and atmosphere deposition, increased by 1.64% and 5.91% compared to PMF results. These findings demonstrate that integration of proper partitioning processing into PMF can effectively improve the accuracy of the model even at the case of soil PTE contamination with high heterogeneity, offering support to subsequently implement directional control strategies.