Wide Bandgap Polymer Donors Based on Succinimide-Substituted Thiophene for Nonfullerene Organic Solar Cells.

The advent of nonfullerene acceptors (NFAs) has greatly improved the photovoltaic performance of organic solar cells (OSCs). However, to compete with other solar cell technologies, there is a pressing need for accelerated research and development of improved NFAs as well as their compatible wide bandgap polymer donors. In this study, a novel electron-withdrawing building block, succinimide-substituted thiophene (TS), is utilized for the first time to synthesize three wide bandgap polymer donors: PBDT-TS-C5, PBDT-TSBT-C12, and PBDTF-TSBT-C16. These polymers exhibit complementary bandgaps for efficient sunlight harvesting and suitable frontier energy levels for exciton dissociation when paired with the extensively studied NFA, Y6. Among these donors, PBDTF-TSBT-C16 demonstrates the highest hole mobility and a relatively low highest occupied molecular orbital (HOMO) energy level, attributed to the incorporation of thiophene spacers and electron-withdrawing fluorine substituents. OSC devices based on the blend of PBDTF-TSBT-C16:Y6 achieve the highest power conversion efficiency of 13.21%, with a short circuit current density (Jsc) of 26.83 mA cm-2, an open circuit voltage (Voc) of 0.80 V, and a fill factor of 0.62. Notably, the Voc × Jsc product reaches 21.46 mW cm-2, demonstrating the potential of TS as an electron acceptor building block for the development of high-performance wide bandgap polymer donors in OSCs.

Dithieno[3,2-f:2',3'-h]quinoxaline-Based Photovoltaic-Thermoelectric Dual-Functional Energy-Harvesting Wide-Bandgap Polymer and its Backbone Isomer.

Both organic solar cells (OSCs) and organic thermoelectrics (OTEs) are promising energy-harvesting technologies for future renewable and sustainable energy sources. Among various material systems, organic conjugated polymers are an emerging material class for the active layers of both OSCs and OTEs. However, organic conjugated polymers showing both OSC and OTE properties are rarely reported because of the different requirements toward the OSCs and OTEs. In this study, the first simultaneous investigation of the OSC and OTE properties of a wide-bandgap polymer PBQx-TF and its backbone isomer iso-PBQx-TF are reported. All wide-bandgap polymers form face-on orientations in a thin-film state, but PBQx-TF has more of a crystalline character than iso-PBQx-TF, originating from the backbone isomeric structures of α,α '/ß,ß '-connection between two thiophene rings. Additionally, iso-PBQx-TF shows inactive OSC and poor OTE properties, probably because of the absorption mismatch and unfavorable molecular orientations. At the same time, PBQx-TF exhibits both decent OSC and OTE performances, indicating that it satisfies the requirements for both OSCs and OTEs. This study presents the OSC and OTE dual-functional energy-harvesting wide-bandgap polymer and the future research directions for hybrid energy-harvesting materials.

Revisiting the Classical Wide-Bandgap HOMO and Random Copolymers for Indoor Artificial Light Photovoltaics.

Organic indoor photovoltaics (IPVs) are attractive energy harvesting devices for low-power consumption electronic devices and the Internet of Things (IoTs) owing to their properties such as being lightweight, semitransparent, having multicoloring capability, and flexibility. It is important to match the absorption range of photoactive materials with the emission spectra of indoor light sources that have a visible range of 400-700 nm for IPVs to provide sustainable, high-power density. To this end, benzo[1,2-b:4,5-b']dithiophene-based homopolymer (PBDTT) is synthesized as a polymer donor, which is a classical material that has a wide bandgap with a deep highest occupied molecular orbitals (HOMO) level, and a series of random copolymers by incorporating thieno[3,4-c]pyrrole-4,6,-dione (TPD) as a weak electron acceptor unit in PBDTT. The composition of the TPD unit is varied to fine tune the absorption range of the polymers; the polymer containing 70% TPD (B30T70) perfectly covers the entire range of indoor lamps such as light-emitting diodes (LEDs) and fluorescent lamp (FL). Consequently, B30T70 shows a dramatic enhancement of the power conversion efficiency (PCE) from 1-sun (PCE: 6.0%) to the indoor environment (PCE: 18.3%) when fabricating organic IPVs by blending with PC71 BM. The simple, easy molecular design guidelines are suggested to develop photoactive materials for efficient organic IPVs.

Influence of Alkyl Substitution Position on Wide-Bandgap Polymers in High-Efficiency Nonfullerene Polymer Solar Cells.

Two wide-bandgap (WBG) conjugated polymers (PBPD-p and PBPD-m) based on phenyl-substituted benzodithiophene (BDT) with the different substitution position of the alkyl side chain and benzodithiophene-4,8-dione (BDD) units are designed and synthesized to investigate the influence of alkyl substitution position on the photovoltaic performance of polymers in polymer solar cells (PSCs). The thermogravimetric analysis, absorption spectroscopy, molecular energy level, X-ray diffraction, charge transport and photovoltaic performance of the polymers are systematically studied. Compared with PBPD-p, PBPD-m exhibits a slight blue-shift but a deeper highest occupied molecular orbital (HOMO) energy level, a tighter alkyl chain packing and a higher hole mobility. The PBPD-m-based PSCs blended with acceptor IT-4F shows a higher power conversion efficiency (PCE) of 11.95% with a high open-circuit voltage (Voc ) of 0.88 V, a short-circuit current density (Jsc ) of 19.76 mA cm-2 and a fill factor (FF) of 68.7% when compared with the PCE of 6.97% with a Voc of 0.81 V, a Jsc of 15.97 mA cm-2 and an FF of 53.9% for PBPD-p. These results suggest that it is a feasible and effective strategy to optimize photovoltaic properties of WBG polymers by changing the substitution position of alkyl side chain in PSCs.

Chain Engineering of Benzodifuran-Based Wide-Bandgap Polymers for Efficient Non-Fullerene Polymer Solar Cells.

Two novel benzo[1,2-b:4,5-b' ]difuran (BDF)-based wide-bandgap polymers, PBDFT-FBz and PBDFF-FBz, featuring a difluorobenzotriazole (FBz) acceptor unit, are designed and synthesized. The first attempt through main-chain engineering to alter thiophene units to furan units in the main chain of PBDFT-FBz, and further side-chain engineering eliminate the 2-ethylthiophenyl side chains of PBDFT-FBz by 2-ethylfuryl side chains to generate the "all-furan" polymer PBDFF-FBz. By taking the benefit of the oxygen atom in furan, both PBDFT-FBz and PBDFF-FBz exhibit lower HOMO energy levels and enhanced polymer chain interactions compared to their benzo[1,2-b:4,5-b' ]dithiophene (BDT)-based counterparts. As a result, while applying both polymers in non-fullerene polymer solar cells with non-fullerene acceptor m-ITIC, both devices exhibit highly promising photovoltaic performance. The power conversion efficiency (PCE) in the PBDFT-FBz device reaches 7.57% with increased open circuit voltage (Voc ) and fill factor (FF) compared to the PCE of 5.98% in its BDT counterpart (J52). A further increased PCE is obtained (8.79%) in the PBDFF-FBz:m-ITIC device, which shows ≈47% enhancement in device performance compared to that of J52. The large increase in photovoltaic performance is attributed to the lower-lying HOMO energy levels and better chain interactions in these BDF-based polymers.

High-Performance Nonfullerene Polymer Solar Cells Based on a Wide-Bandgap Polymer without Extra Treatment.

Nonfullerene polymer solar cells (PSCs) are developed based on a fluorinated thienyl-based wide-bandgap (WBG) polymer PBBF as the electron donor and nonfullerene small molecule IDIC as the electron acceptor. PBBF exhibits a strong absorption in the range of 300-605 nm with a wide optical bandgap of 2.05 eV, which is complementary with that of IDIC. Meanwhile, it possesses a deeper highest occupied molecular orbital energy level of  -5.52 eV and a higher hole mobility of 7.3 × 10-4  cm2 V-1  s-1 compared to the nonfluorinated polymer PBDTT. The PSCs based on PBBF:IDIC without extra treatment show a power conversion efficiency (PCE) of 8.5% with a V oc of 0.95 V, a J sc of 15.3 mA cm-2 , and an FF of 58.8%, which is much higher than that of the devices based on PBDTT:IDIC (a PCE of 5.3% with a V oc of 0.88 V, a J sc of 13.7 mA cm-2 , and an FF of 43.9%). These results indicate that PBBF is a promising WBG polymer donor material for the photovoltaic applications in nonfullerene PSCs.

A New Polymer Donor Enables Binary All-Polymer Organic Photovoltaic Cells with 18% Efficiency and Excellent Mechanical Robustness.

The development of polymerized small-molecule acceptors has boosted the power conversion efficiencies (PCEs) of all-polymer organic photovoltaic (OPV) cells to 17%. However, the polymer donors suitable for all-polymer OPV cells are still lacking, restricting the further improvement of their PCEs. Herein, a new polymer donor named PQM-Cl is designed and its photovoltaic performance is explored. The negative electrostatic potential and low average local ionization energy distribution of the PQM-Cl surface enable efficient charge generation and transfer process. When blending with a well-used polymer acceptor, PY-IT, the PQM-Cl-based devices deliver an impressive PCE of 18.0% with a superior fill factor of 80.7%, both of which are the highest values for all-polymer OPV cells. The relevant measurements demonstrate that PQM-Cl-based films possess excellent mechanical and flexible properties. As such, PQM-Cl-based flexible photovoltaic cells are fabricated and an excellent PCE of 16.5% with high mechanical stability is displayed. These results demonstrate that PQM-Cl is a potential candidate for all-polymer OPV cells and provide insights into the design of polymer donors for high-efficient all-polymer OPV cells.

Fine Tuning Alkyl Substituents on Dithienoquinoxaline-Based Wide-Bandgap Polymer Donors for Organic Photovoltaics.

The molecular design of wide-bandgap conjugated polymer donors (WB-CPDs) is a promising strategy for tuning the bulk heterojunction blend film morphologies to achieve high-performance organic photovoltaic (OPV) devices. Herein, we synthesize two WB-CPDs, namely, PBQ-H and PBQ-M, with and without methyl groups on the fused-dithieno[3,2-f:2',3'-h]quinoxaline (DTQx) moiety. We systematically investigate their structure-property relationship and OPV performances. The AFM and 2D grazing-incidence wide-angle X-ray scattering (GIWAXS) studies reveal that the PBQ-H:BO-4Cl BHJ blend shows strengthened aggregation behavior and stronger π-π stacking on face-on orientation compared with the PBQ-M:BO-4Cl BHJ blend, enhancing the phase separation, charge transport, and fill factor (FF). Blend film absorption spectra, however, show that the PBQ-H:BO-4Cl BHJ blend exhibits a lower absorption coefficient than that of the PBQ-M:BO-4Cl BHJ blend, which decreases the short-circuit current density (JSC). As a consequence, the optimized PBQ-H:BO-4Cl BHJ blend delivers a higher power conversion efficiency (PCE) of 12.88% with a JSC of 23.97 mA/cm2, an open-circuit voltage (VOC) of 0.86 V, and an FF of 62.46%, compared with the PBQ-M:BO-4Cl BHJ blend (PCE of 11.81% with a JSC of 24.78 mA/cm2, a VOC of 0.85 V, and an FF of 56.11%). Overall, this work demonstrates that alkyl group substitution on the DTQx moiety on the basis of WB-CPDs is critical for controlling the film morphology and thus obtaining high OPV performances.

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light-Emitting Functions in One Device.

Exploring the intriguing bifunctional nature of organic semiconductors and investigating the feasibility of fabricating bifunctional devices are of great significance in realizing various applications with one device. Here, the design of a new wide-bandgap polymer named PBQx-TCl (optical bandgap of 2.05 eV) is reported, and its applications in photovoltaic and light-emitting devices are studied. By fabricating devices with nonfullerene acceptors BTA3 and BTP-eC9, it is shown that the devices exhibit a high power conversion efficiency (PCE) of 18.0% under air mass 1.5G illumination conditions and an outstanding PCE of 28.5% for a 1 cm2 device and 26.0% for a 10 cm2 device under illumination from a 1000 lux light-emitting diode. In addition, the PBQx-TCl:BTA3-based device also demonstrates a moderate organic light-emitting diode performance with an electroluminescence external quantum efficiency approaching 0.2% and a broad emission range of 630-1000 nm. These results suggest that the polymer PBQx-TCl-based devices exhibit outstanding photovoltaic performance and potential light-emitting functions.

Single-Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy.

A new strategy of platinum(II) complexation is developed to regulate the crystallinity and molecular packing of polynitrogen heterocyclic polymers, optimize the morphology of the active blends, and improve the efficiency of the resulting nonfullerene polymer solar cells (NF-PSCs). The newly designed s-tetrazine (s-TZ)-containing copolymer of PSFTZ (4,8-bis(5-((2-butyloctyl)thio)-4-fluorothiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene-alt-3,6-bis(4-octylthiophen-2-yl)-1,2,4,5-tetrazine) has a strong aggregation property, which results in serious phase separation and large domains when blending with Y6 ((2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″:4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile)), and produces a power-conversion efficiency (PCE) of 13.03%. By adding small amount of Pt(Ph)2 (DMSO)2 (Ph, phenyl and DMSO, dimethyl sulfoxide), platinum(II) complexation would occur between Pt(Ph)2 (DMSO)2 and PSFTZ. The bulky benzene ring on the platinum(II) complex increases the steric hindrance along the polymer main chain, inhibits the polymer aggregation strength, regulates the phase separation, optimizes the morphology, and thus improves the efficiency to 16.35% in the resulting devices. 16.35% is the highest efficiency for single-junction PSCs reported so far.

Influence of Bridging Groups on the Photovoltaic Properties of Wide-Bandgap Poly(BDTT- alt-BDD)s.

To further advance polymer solar cells requires the fast evolution of π-conjugated materials as well as a better understanding of their structure-property relationships. Herein, we present three copolymers (PT1, PT2, PT3) made through tuning π-bridges (without any group, thiophene, and 3-hexylthieno[3,2- b]thiophene) between electron-rich (D: BDTT) and -deficient (A: BDD) units. The comparative studies reveal the unique correlation that the tune of π-bridge on the polymeric backbone governs the solid stacking and photovoltaic properties of resultant poly(BDTT- alt-BDD)s, which provide an effective way to deliver new and efficient polymer with feasible processability. That is, polymers with either twist zigzag backbone (PT1) or with linear coplanar backbone (PT2) result in inferior photovoltaic performance upon simple solution casting. Among them, PT3 with extended zigzag backbone and planar segments exhibits suitable processability and retains good efficiency in nonfullerene solar cells through a single-solvent cast without involving tedious treatments. This work illustrates that the tuning of the D-π-A polymer backbone facilitates efficient materials with feasible processability, promising for scale-up fabrication.

Wide-Bandgap Benzodithiophene-Benzothiadiazole Copolymers for Highly Efficient Multijunction Polymer Solar Cells.

Novel wide-bandgap semiconducting polymers are designed and synthesized for multijunction polymer solar cell (PSC) applications. In single-junction PSCs, BDT-FBT-2T exhibits efficiencies exceeding 6.5% for active layer thicknesses between 90 and 250 nm, with the highest efficiency of 7.7% at 100 and 250 nm. This enables tandem PSCs to be created with an efficiency of 8.9%.