Data-Driven Living Spaces' Heating Dynamics Modeling in Smart Buildings using Machine Learning-Based Identification.

Modeling and control of the heating feature of living spaces remain challenging tasks because of the intrinsic nonlinear nature of the involved processes as well as the strong nonlinearity of the entailed dynamic parameters in those processes. Although nowadays, adaptive heating controllers represent a crucial need for smart building energy management systems (SBEMS) as well as an appealing perspective for their effectiveness in optimizing energy efficiency, unfortunately, the leakage of models competent in handling the complexity of real living spaces' heating processes means the control strategies implemented in most SBEMSs are still conventional. Within this context and by considering that the living space's occupation rate (i.e., by users or residents) may affect the model and the issued heating control strategy of the concerned living space, we have investigated the design and implementation of a data-driven machine learning-based identification of the building's living space dynamic heating conduct, taking into account the occupancy (by the residents) of the heated space. In fact, the proposed modeling strategy takes advantage, on the one hand, of the forecasting capacity of the time-series of the nonlinear autoregressive exogenous (NARX) model, and on the other hand, from the multi-layer perceptron's (MLP) learning and generalization skills. The proposed approach has been implemented and applied for modeling the dynamic heating conduct of a real five-floor building's living spaces located at Senart Campus of University Paris-Est Créteil (UPEC), taking into account their occupancy (by users of this public building). The obtained results assessing the accuracy and addictiveness of the investigated hybrid machine learning-based approach are reported and discussed.

Thermoneutral zone for laying hens based on environmental conditions, enthalpy and thermal comfort indexes.

Controlling environmental conditions inside laying hens facilities systems and their effects on physiology and performance is essential in defining management strategies to alleviate the adverse effects of thermal stress in laying hens. Thus, we estimated thermoneutral zones for laying hens exposed to different heat-challenging conditions based on environmental conditions, enthalpy, and thermal comfort indexes being evaluated out in four thermal environment-controlled wind tunnels equipped with heating and air moistening function, housed in an experimental room with an area of 31.92 m2. Clustering analysis and empirical models were used to estimate thermoneutral zones for laying hens based on environmental conditions, enthalpy and thermal comfort indexes, and compare them with data available in the literature through graphics. The thermoneutral zones characterizing homeostasis for laying hens based on respiration rate (RR) are as follows: from 25.9 to 29.9 °C for air dry-bulb temperature (tdb), from 67 to 75 for temperature-humidity index (THI), from 68 to 73 for black globe-humidity index (BGHI), from 45 to 56 kJ kg dry air-1 for enthalpy (H) and 441.7-465.6 W for radiant heat load (RHL). Comfort limits for physiological responses cloacal temperature (tclo), surface temperature (tsur) and RR found in this study are 39.4-39.9 °C, 26.5 to 29.9 °C and 30 to 67 mov. min-1, respectively. The number of repetitions and the use of mathematical modeling to be worked on, may directly impact the amplitude of each limit to be established for each variable of interest.

Identification of local thermal conditions for sleeping comfort improvement in neutral to cold indoor thermal environments.

The effect of the thermal environment on sleep quality has attracted considerable attention, as sleep forms one-third of human lifetime and the occupied space is largely constrained during sleep. With an increasing development of partial space regulation and task air conditioning systems and devices, thermal comfort demand concerning local thermal conditions has attracted more and more attention. In the present study, experiment was conducted and data mining technologies were performed to investigate correlations between local thermal conditions and whole body thermal comfort in sleeping state. The identification of local thermal condition included two steps: the first step was to clarify thermal sensation links between local and covered body, and the second step was to identify local thermal sensation inclination towards different thermal comfort levels. Thermal sensation correlations among local body parts and covered body were obtained. Back, face, and thigh were identified as three dominant linear-correlated local parts with weighting factors 0.488, 0.388, and 0.152, respectively; in addition, chest, arm, leg and foot were found as non-negligible local parts in the estimation of covered body thermal sensation. By dividing the sleeping human body into three parts as head, trunk and extremity, the proper local thermal sensations and their coupling relationships for whole body sleeping thermal comfort have been elaborated by three rules. The present study provides implications in sleeping thermal environment regulation in neutral to cold indoor conditions.

Comparing Forced-Air to Resistive-Polymer Warming for Perioperative Temperature Management: A Retrospective Study.

PURPOSE: Compare perioperative temperature management between forced-air warming (FAW) and resistive-polymer heating blankets (RHBs). DESIGN: A retrospective, quasi-experimental study. METHODS: Retrospective data analysis of nonspine orthopedic cases (N = 426) over a one-year period including FAW (n = 119) and RHBs (n = 307). FINDINGS: FAW was associated with a significantly higher final intraoperative temperature (P = .001, d = 0.46) than the RHB. The incidence of hypothermia was not found to be significantly different at the end (P = .102) or anytime throughout surgery (P = .270). Of all patients who started hypothermic, the FAW group had a lower incidence of hypothermia at the end of surgery (P = .023). CONCLUSIONS: FAW was associated with higher final temperatures and a greater number of normothermic patients than RHBs. However, no causal relationship between a warming device and hypothermia incidence should be assumed.

Comparison of the performance of battery-operated fluid warmers.

OBJECTIVES: Warming intravenous fluids is essential to prevent hypothermia in patients with trauma, especially when large volumes are administered. Prehospital and transport settings require fluid warmers to be small, energy efficient and independent of external power supply. We compared the warming properties and resistance to flow of currently available battery-operated fluid warmers. METHODS: Fluid warming was evaluated at 50, 100 and 200 mL/min at a constant input temperature of 20°C and 10°C using a cardiopulmonary bypass roller pump and cooler. Output temperature was continuously recorded. RESULTS: Performance of fluid warmers varied with flows and input temperatures. At an input temperature of 20°C and flow of 50 mL/min, the Buddy Lite, enFlow, Thermal Angel and Warrior warmed 3.4, 2.4, 1 and 3.6 L to over 35°C, respectively. However, at an input temperature of 10°C and flow of 200 mL/min, the Buddy Lite failed to warm, the enFlow warmed 3.3 L to 25.7°C, the Thermal Angel warmed 1.5 L to 20.9°C and the Warrior warmed 3.4 L to 34.4°C (p<0.0001). CONCLUSION: We found significant differences between the fluid warmers: the use of the Buddy Lite should be limited to moderate input temperature and low flow rates. The use of the Thermal Angel is limited to low volumes due to battery capacity and low output temperature at extreme conditions. The Warrior provides the best warming performance at high infusion rates, as well as low input temperatures, and was able to warm the largest volumes in these conditions.

Heating, ventilation and air conditioning (HVAC) system, microbial air contamination and surgical site infection in hip and knee arthroplasties: the GISIO-SItI Ischia study.

BACKGROUND: Recent studies have questioned the role of unidirectional airflow ventilation system in reducing surgical site infection (SSI) in prosthetic implant surgery. The aim of the ISChIA study ("Infezioni del Sito Chirurgico in Interventi di Artroprotesi" which means "Surgical site infections in arthroplasty surgery") was to evaluate, as a contribution to this debate, the association between heating, ventilation and air conditioning systems, microbial air contamination and surgical site infection in hip and knee arthroplasty. METHODS: The study was performed from March 2010 to February 2012 in 14 hospitals, for a total of 28 operating theatres: 16 were equipped with vertical unidirectional airflow ventilation (U-OTs), 6 with mixed airflow ventilation (M-OTs), 6 with turbulent airflow ventilation (T-OTs). Microbial air contamination in the operating theatre was evaluated by means of passive (Index of Microbial Air contamination, IMA) and active (Colony Forming Units per cubic metre, cfu/m3) sampling. SSI surveillance was carried out according to the Hospitals in Europe Link for Infection Control through Surveillance protocol. RESULTS: A total of 1,285 elective prosthesis procedures (61.1% hip and 38.9% knee) were included in the study. The results showed a wide variability of the air microbial contamination in operating theatres equipped with unidirectional airflow. The recommended values of ≤2 IMA and ≤10 cfu/m3 were exceeded, respectively, by 58.9% and 46.4% of samples from U-OTs and by 87.6% and 100% of samples from M-OTs. No significant difference was observed between SSI cumulative incidence in surgical procedures performed in U-OTs compared with those performed in T-OTs. A lower risk of SSI, even though not statistically significant, was shown in surgical procedures performed in U-OTs with a microbial air contamination within the recommended values (≤2 IMA and ≤10 cfu/m3) compared with those performed in U-OTs where these limits were exceeded, and compared with those performed in T-OTs with microbial air contamination within the recommended values for this type of OTs (≤25 IMA, ≤180 cfu/m3. CONCLUSION: ISChIA study did not show a protective effect of unidirectional airflow compared with turbulent airflow in arthroplasty surgery. However, the frequent exceeding of recommended air microbial contamination values in OTs equipped with unidirectional airflow, and the lower SSI risk in surgical procedures performed in compliant U-OTs compared with those performed in non-compliant U-OTs and with those performed in compliant T-OTs, suggest the need of further studies, which should consider air microbial contamination and other aspects of SSI prevention that may negate the potential benefits of the ventilation system; differences in intrinsic and extrinsic risk factors, medical treatment and surgical technique are also to be considered. Training interventions aimed at improving the behaviour of operators are essential.

Minimum indoor temperature threshold recommendations for English homes in winter - A systematic review.

OBJECTIVES: To identify and assess the available evidence on the impacts of cold indoor temperature thresholds on human health and make evidence-based recommendations for English homes. STUDY DESIGN: Systematic literature review. METHODS: A systematic search of peer-reviewed published literature from the UK and countries with similar climates, and grading of the evidence using the National Institute of Health (NIH) framework was followed by a discussion with experts and formulation of recommendations. RESULTS: Twenty papers were included. Studies were included if they were conducted outside England but were from countries considered to have similar climates. Studies included two small randomised controlled trials, two cohort studies and one case control study; other studies were cross-sectional, largely laboratory-based studies. Health effects in the general population start to occur at around 18 °C. Effects in older people are more profound than in younger adults. Older people are less able to perceive low temperatures. DISCUSSION: Although evidence was limited, a strong argument for setting thresholds remains. The effects observed on the general population and the effects on those more vulnerable makes a case for a recommended minimum temperature for all. Health messages should be clear and simple, allowing informed choices to be made. A threshold of 18 °C was considered the evidence based and practical minimum temperature at which a home should be kept during winter in England. CONCLUSION: There is limited evidence available on minimum temperature thresholds for homes. However a recommendation of at least 18 °C for the whole population with nuancing of messages for those more vulnerable to the effects of cold can be made from the results of the retrieved studies. RECOMMENDATION: Heating homes to at least 18 °C (65 °F) in winter poses minimal risk to the health of a sedentary person, wearing suitable clothing.

[Amendments to the Drinking Water Ordinance: Legionellae in Hot Water Systems - Data from the Public Health Authority Frankfurt am Main, Germany]. / Änderungen der Trinkwasserverordnung: Legionellen in Großanlagen - Erfahrungen aus dem Gesundheitsamt Frankfurt am Main.

BACKGROUND: The first and second amendment to the Drinking Water Ordinance came in to force in the years 2011 and 2012 causing additional tasks and responsibilities for operators of commercial large-scale systems, usually hot water systems in large residential buildings, and for the local health authorities. This article describes the experiences of the health authority in Frankfurt/Main with these new regulations. Some of the revisions in the first amendment of the ordinance (TrinkwV 2001 (2011)) were omitted in the second revision (TrinkwV 2001 (2012)) such as the obligation to notify for large-scale systems. Furthermore, the intervals between the obligatory inspections were extended from 1 to 3 years and merely exceedances of the legal limits were to be notified in contrast to the previous obligation to notify all values. RESULTS: On the basis of the TrinkwV 2001 (2011) a large additional staff requirement had been estimated (13/21 positions). After the TrinkwV 2001 (2012) the tasks can be accomplished by less than 2 employees. While the notification obligation was still in force, the health authority received 4,461 notifications of large-scale systems, since then a further 477 have been notified. Of a total of 1,335 initial analyses, 794 (60%) exceeded the technical action value and in 113 properties with values exceeding 10,000/100 ml a usage restriction was necessary. CONCLUSIONS: Due to the suspension of the notification obligation to report any result of the analyses performed the assessment of the reports on large-scale systems has become difficult. An appropriate assessment of the implementation of the regulation is not possible, since the total number of large-scale systems is not known and a failure to report may result from a measured value below the technical action value as well as from a not inspected system. The large number of usage restrictions is an indication for the necessity to inspect and if required to treat and restore the system.

Housing improvements for health and associated socio-economic outcomes.

BACKGROUND: The well established links between poor housing and poor health indicate that housing improvement may be an important mechanism through which public investment can lead to health improvement. Intervention studies which have assessed the health impacts of housing improvements are an important data resource to test assumptions about the potential for health improvement. Evaluations may not detect long term health impacts due to limited follow-up periods. Impacts on socio-economic determinants of health may be a valuable proxy indication of the potential for longer term health impacts. OBJECTIVES: To assess the health and social impacts on residents following improvements to the physical fabric of housing. SEARCH METHODS: Twenty seven academic and grey literature bibliographic databases were searched for housing intervention studies from 1887 to July 2012 (ASSIA; Avery Index; CAB Abstracts; The Campbell Library; CINAHL; The Cochrane Library; COPAC; DH-DATA: Health Admin; EMBASE; Geobase; Global Health; IBSS; ICONDA; MEDLINE; MEDLINE In-Process & Other Non-Indexed Citations; NTIS; PAIS; PLANEX; PsycINFO; RIBA; SCIE; Sociological Abstracts; Social Science Citations Index; Science Citations Index expanded; SIGLE; SPECTR). Twelve Scandinavian grey literature and policy databases (Libris; SveMed+; Libris uppsök; DIVA; Artikelsök; NORART; DEFF; AKF; DSI; SBI; Statens Institut for Folkesundhed; Social.dk) and 23 relevant websites were searched. In addition, a request to topic experts was issued for details of relevant studies. Searches were not restricted by language or publication status. SELECTION CRITERIA: Studies which assessed change in any health outcome following housing improvement were included. This included experimental studies and uncontrolled studies. Cross-sectional studies were excluded as correlations are not able to shed light on changes in outcomes. Studies reporting only socio-economic outcomes or indirect measures of health, such as health service use, were excluded. All housing improvements which involved a physical improvement to the fabric of the house were included. Excluded interventions were improvements to mobile homes; modifications for mobility or medical reasons; air quality; lead removal; radon exposure reduction; allergen reduction or removal; and furniture or equipment. Where an improvement included one of these in addition to an included intervention the study was included in the review. Studies were not excluded on the basis of date, location, or language. DATA COLLECTION AND ANALYSIS: Studies were independently screened and critically appraised by two review authors. Study quality was assessed using the risk of bias tool and the Hamilton tool to accommodate non-experimental and uncontrolled studies. Health and socio-economic impact data were extracted by one review author and checked by a second review author. Studies were grouped according to broad intervention categories, date, and context before synthesis. Where possible, standardized effect estimates were calculated and statistically pooled. Where meta-analysis was not appropriate the data were tabulated and synthesized narratively following a cross-study examination of reported impacts and study characteristics. Qualitative data were summarized using a logic model to map reported impacts and links to health impacts; quantitative data were incorporated into the model. MAIN RESULTS: Thirty-nine studies which reported quantitative or qualitative data, or both, were included in the review. Thirty-three quantitative studies were identified. This included five randomised controlled trials (RCTs) and 10 non-experimental studies of warmth improvements, 12 non-experimental studies of rehousing or retrofitting, three non-experimental studies of provision of basic improvements in low or mIddle Income countries (LMIC), and three non-experimental historical studies of rehousing from slums. Fourteen quantitative studies (42.4%) were assessed to be poor quality and were not included in the synthesis. Twelve studies reporting qualitative data were identified. These were studies of warmth improvements (n = 7) and rehousing (n = 5). Three qualitative studies were excluded from the synthesis due to lack of clarity of methods. Six of the included qualitative studies also reported quantitative data which was included in the review.Very little quantitative synthesis was possible as the data were not amenable to meta-analysis. This was largely due to extreme heterogeneity both methodologically as well as because of variations in the intervention, samples, context, and outcome; these variations remained even following grouping of interventions and outcomes. In addition, few studies reported data that were amenable to calculation of standardized effect sizes. The data were synthesised narratively.Data from studies of warmth and energy efficiency interventions suggested that improvements in general health, respiratory health, and mental health are possible. Studies which targeted those with inadequate warmth and existing chronic respiratory disease were most likely to report health improvement. Impacts following housing-led neighbourhood renewal were less clear; these interventions targeted areas rather than individual households in most need. Two poorer quality LMIC studies reported unclear or small health improvements. One better quality study of rehousing from slums (pre-1960) reported some improvement in mental health. There were few reports of adverse health impacts following housing improvement. A small number of studies gathered data on social and socio-economic impacts associated with housing improvement. Warmth improvements were associated with increased usable space, increased privacy, and improved social relationships; absences from work or school due to illness were also reduced.Very few studies reported differential impacts relevant to equity issues, and what data were reported were not amenable to synthesis. AUTHORS' CONCLUSIONS: Housing investment which improves thermal comfort in the home can lead to health improvements, especially where the improvements are targeted at those with inadequate warmth and those with chronic respiratory disease. The health impacts of programmes which deliver improvements across areas and do not target according to levels of individual need were less clear, but reported impacts at an area level may conceal health improvements for those with the greatest potential to benefit. Best available evidence indicates that housing which is an appropriate size for the householders and is affordable to heat is linked to improved health and may promote improved social relationships within and beyond the household. In addition, there is some suggestion that provision of adequate, affordable warmth may reduce absences from school or work.While many of the interventions were targeted at low income groups, a near absence of reporting differential impacts prevented analysis of the potential for housing improvement to impact on social and economic inequalities.

Measuring hygiene and health perfomance of buildings: a multidimensional approach.

This paper proposes an innovative and transparent methodology to support the "ASL Milano" (Local Health Agency) in the hygiene and health evaluation of construction projects, in order to highlight their positive and negative performance beyond the requirements imposed by the current laws and regulations regarding buildings' hygiene performance, which are too old and therefore unsuitable to ascertain the real quality of indoor environments. The compliance with laws or regulations, mostly out of date, and the assessment of performance involving only a part of the current emerging needs and problems, in fact, should be considered as a necessary, although not a sufficient step, to ensure high quality indoors. Consequently, it is necessary to identify and test an assessment tool which could provide an effective and flexible support for the development of hygiene and health statements regarding projects at building scale (new construction, conversion of the existing, rehabilitation, extension, change of use, etc). The assessment tool suggested by this paper is tailored for the metropolitan area of the city of Milan, but its evaluation framework could be developed and applied to other contexts.

Exposure of the human body to professional and domestic induction cooktops compared to the basic restrictions.

We investigated whether domestic and professional induction cooktops comply with the basic restrictions defined by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). Based on magnetic field measurements, a generic numerical model of an induction cooktop was derived in order to model user exposure. The current density induced in the user was simulated for various models and distances. We also determined the exposure of the fetus and of young children. While most measured cooktops comply with the public exposure limits at the distance specified by the International Electrotechnical Commission (standard IEC 62233), the majority exceeds them at closer distances, some of them even the occupational limits. The maximum current density in the tissue of the user significantly exceeds the basic restrictions for the general public, reaching the occupational level. The exposure of the brains of young children reaches the order of magnitude of the limits for the general public. For a generic worst-case cooktop compliant with the measurement standards, the current density exceeds the 1998 ICNIRP basic restrictions by up to 24 dB or a factor of 16. The brain tissue of young children can be overexposed by 6 dB or a factor of 2. The exposure of the tissue of the central nervous system of the fetus can exceed the limits for the general public if the mother is exposed at occupational levels. This demonstrates that the methodology for testing induction cooktops according to IEC 62233 contradicts the basic restrictions. This evaluation will be extended considering

Foot-pad dermatitis and experimentally induced coccidiosis in young turkeys fed a diet without anticoccidia.

Foot-pad dermatitis (FPD) is a widespread challenge to turkey production. This study aimed at evaluating the effects of using floor heating and exposure to litter with critical moisture content (35%) under experimental infection with Eimeria. adenoeides on the severity of FPD in turkeys. Two trials were done; in each trial, 4 groups of 2-wk-old female turkeys were reared over 4 wk. At the start of the experiment (d 14), each bird had normal foot pads. All birds were fed ad libitum on identical pelleted diets without any anticoccidial additive. The first 2 groups were kept on dry wood shavings with or without floor heating; the other 2 groups were housed on wet wood shavings of 35% moisture with or without floor heating. Two birds in each of the 4 groups were experimentally infected with E. adenoeides via crop intubation (~50,000 oocysts/bird). Foot pads were assessed weekly for external scoring and at d 42 of life for histopathological scoring. The number of oocysts eliminated via excreta was determined. In both trials, using floor heating resulted in significantly decreased FPD scores (2.06 ± 0.735; 1.47 ± 0.734, trials 1 and 2, respectively) compared with groups housed without floor heating (3.88 ± 0.812; 2.73 ± 1.25, trials 1 and 2, respectively). Birds continuously exposed to wet litter (35% moisture) showed significantly increased FPD scores (3.41 ± 1.23; 2.69 ± 1.34, trials 1 and 2, respectively) compared with the group not exposed to wet litter (2.53 ± 1.00; 1.53 ± 0.683, trials 1 and 2, respectively). The coccidial infection in both trials resulted in markedly lowered DM contents of excreta (14.8 and 15.1%, trials 1 and 2, respectively) and litter (58.0 and 57.6%, trials 1 and 2, respectively) in the groups exposed to wet litter without using floor heating. In both trials, using floor heating resulted in the highest mean DM content of litter (85.1 and 85.0%, trials 1 and 2, respectively) and the highest BW (2,693 and 2,559 g, trials 1 and 2, respectively). The results suggest that induced diarrhea caused by coccidial infection led to poor litter quality, and hence, increased the severity of FPD, which can be overcome by using floor heating.

Epidemiology of unintentional carbon monoxide fatalities in the UK.

This study aims to describe the epidemiology of unintentional non-fire related CO fatalities in the UK and to relate this information to sources of CO. Data from the CO-Gas Safety Society (COGSS) database was analysed and compared with data from the English House Condition Survey (EHCS). There were 462 deaths from the COGSS database, from 1 January 1996 to 31 December 2007 inclusive. The relative risk for death due to non-gas vs gas fuels was 10.52 (95% CI 7.71-14.34). The main weakness of the study is the likely underascertainment of CO deaths in the database. However, this study has identified specific risk factors for CO-related deaths in the UK; the use of non-gas fuels has not previously been highlighted as a significant cause of CO poisoning, and the relative risk (although not the absolute risk) of CO-related fatalities from these fuels is substantial.

[Assessment of the hygienic and sanitary conditions of housing in a sample in Chieti (central Italy)]. / Analisi delle condizioni igienico-sanitarie di un campione di abitazioni del Comune di Chieti.

The study describes the housing conditions of 106 dwellings in the town of Chieti (Abruzzo region, central Italy), inspected by Local Health Authority, in the period between the 1st of January 2009 and the 28th of February 2011. In 59.4% of them lived Italians, while in the remaining 40.6% lived foreigners. 35.8% of the houses met minimum law requirements, 24.5% were anti-hygienic, 24.5% anti-hygienic and overcrowded, 13.2% overcrowded, 1.9% uninhabitable. The main issues were moisture and molds (52.8%). The second one was the inadequacy of floor area in relation with inhabitants (37.7%). Other problems were bedrooms (9.4%), baths (8.5%) and kitchens not complying minimum law requirements, but also not sufficient both ceiling hights (3.7%) and windows (2.8%) of rooms. Considering that human population in richest countries spend up to 90% of their lives in indoor environment, especially at home, the links between housing and health are really strong, and more must be done to improve general consideration of these themes both in general population and involved professionists (i.e. physicians, other health professionists, social workers, architects and engineers).

Forced-air warming does not worsen air quality in laminar flow operating rooms.

BACKGROUND: Warm air released by forced-air covers could theoretically disturb laminar airflow in operating rooms. We thus tested the hypothesis that laminar flow performance remains well within rigorous and objective standards during forced-air warming. METHODS: We evaluated air quality in 2 laminar flow operating rooms using a volunteer "patient" and heated manikin "surgeons." Reduction in tracer background particle counts near the site of a putative surgical incision was evaluated as specified by the rigorous DIN 1946-4:2008-12 standard. Results were confirmed using smoke as a visual tracer. RESULTS: Background tracer particle concentrations were reduced 4 to 5 log by the laminar flow system, and there were no statistically significant or clinically important differences with a forced-air blower set to off, ambient air, and high temperature. All values remained well within the requirements of the DIN 1946-4:2008-12 standard. Activation of a forced-air warming system did not create an upward draft or interfere with normal and effective function of the laminar flow process. CONCLUSIONS: Our results, based on quantitative performance testing methods, indicate that forced-air warming does not reduce operating room air quality during laminar flow ventilation. Because there is no decrement in laminar flow performance, forced-air warming remains an appropriate intraoperative warming method when laminar flow is used.

[Physiological and hygienic rationale for the duration of exposure to the heating environment and comfortable thermal conditions during a workshift].

The strain in different functional systems of human body maintaining thermal homeostasis that develops during work under heating conditions results in impaired working capacity and efficiency and may be harmful to health. One of the most efficacious measures is the reduction of exposure to the adverse conditions and its rational alternation with rest in the comfortable environment. Based on the mathematical and statistical analysis of the results of multiple-factor experiments, we derived a multiple regression equation describing the quantitative dependence of the integral index of human body thermal regime on the totality of factors responsible for thermal strain. The equation permits to determine the heat content in the human body formed by exothermal and endothermal strain, to estimate the contribution of each individual factor, and to predict the risk of overheating in order to take measures for reducing the thermal strain. Recommendations are proposed on the duration of thermal exposure during a workshift depending on the overheating risk level and on the optimal relationship between the duration of staying in the heating microclimate and the duration of the rest (work) in the comfortable environment.

Seasonal mapping of NICU temperature.

PURPOSE: To create a thermal map of ambient air, radiant, and evaporative temperatures and humidity throughout the NICU nursery by season across a calendar year. SUBJECTS: Each cubicle of the 32-bed NICU, distributed across 5 rooms, in a level III nursery was measured. METHODS: Temperatures were recorded at a consistent time on one day during January, April, July, and October. MAIN OUTCOME MEASURES: An electronic monitor (QUESTemp degrees 34; Quest Technologies, Oconomowoc, Wisconsin) was used to measure dry bulb, wet bulb, and globe thermometer temperatures. RESULTS: Analysis of variance revealed statistically significant (P < .000) differences in season, room, and season by room interaction. Room ambient air temperatures differed by less than 2 degrees F across season. Radiant temperature paralleled air temperature. Humidity, the predominant difference across season, produced evaporative temperatures considerably lower than room air temperature, and the gradient between mean nursery dry bulb temperature and wet bulb temperature was 9.3 degrees F in summer and 16.8 degrees F in winter. CONCLUSIONS: The thermal map revealed seasonal thermal differences, particularly in humidity level and evaporative temperature. Room temperature alone does not reflect the total thermal environment. Recommendations include periodic assessment of nurseries along with air, evaporative, and radiant temperatures as well as humidity to fully appreciate the impact of the thermal environment on infants.

The associations between thermal variety and health: Implications for space heating energy use.

Fossil fuels dominate domestic heating in temperate climates. In the EU, domestic space heating accounts for around 20% of final energy demand. Reducing domestic demand temperatures would reduce energy demand. However, cold exposure has been shown to be associated with adverse health conditions. Using an observational dataset of 77,762 UK Biobank participants, we examine the standard deviation of experienced temperature (named here thermal variety) measured by a wrist worn activity and temperature monitor. After controlling for covariates such as age, activity level and obesity, we show that thermal variety is 0.15°C 95% CI [0.07-0.23] higher for participants whose health satisfaction was 'extremely happy' compared to 'extremely unhappy'. Higher thermal variety is also associated with a lower risk of having morbidities related to excess winter deaths. We argue that significant CO2 savings would be made by increasing thermal variety and reducing domestic demand temperatures in the healthiest homes. However, great care is needed to avoid secondary health impacts due to mould and damp. Vulnerable households should receive increased attention.

Back to Normal: An Old Physics Route to Reduce SARS-CoV-2 Transmission in Indoor Spaces.

We advocate the widespread use of UV-C light as a short-term, easily deployable, and affordable way to limit virus spread in the current SARS-CoV-2 pandemic. Radical social distancing with the associated shutdown of schools, restaurants, sport clubs, workplaces, and traveling has been shown to be effective in reducing virus spread, but its economic and social costs are unsustainable in the medium term. Simple measures like frequent handwashing, facial masks, and other physical barriers are being commonly adopted to prevent virus transmission. However, their efficacy may be limited, particularly in shared indoor spaces, where, in addition to airborne transmission, elements with small surface areas such as elevator buttons, door handles, and handrails are frequently used and can also mediate transmission. We argue that additional measures are necessary to reduce virus transmission when people resume attending schools and jobs that require proximity or some degree of physical contact. Among the available alternatives, UV-C light satisfies the requirements of rapid, widespread, and economically viable deployment. Its implementation is only limited by current production capacities, an increase of which requires swift intervention by industry and authorities.