Occurrence of Cis-11,12-Methylene-Hexadecanoic Acid in the Red Alga Solieria pacifica (Yamada) Yoshida.

Fatty acids in marine algae have attracted the attention of natural chemists because of their biological activity. The fatty acid compositions of the Solieriaceae families (Rhodophyceae, Gaigartinales) provide interesting information that unusual cyclic fatty acids have been occasionally found. A survey was conducted to profile the characteristic fatty acid composition of the red alga Solieria pacifica (Yamada) Yoshida using gas chromatography-mass spectrometry (GC-MS), infrared spectroscopy (IR), and proton nuclear magnetic resonance spectroscopy (1H-NMR). In S. pacifica, two cyclopentyl fatty acids, 11-cyclopentylundecanoic acid (7.0%), and 13-cyclopentyltridecanoic acid (4.9%), and a cyclopropane fatty acid, cis-11,12-methylene-hexadecanoic acid (7.9%) contributed significantly to the overall fatty acid profile. In particular, this cyclopropane fatty acid has been primarily found in bacteria, rumen microorganisms or foods of animal origin, and has not previously been found in any other algae. In addition, this alga contains a significant amount of the monoenoic acid cis-11-hexadecenoic acid (9.0%). Therefore, cis-11,12-methylene-hexadecanoic acid in S. pacifica was likely produced by methylene addition to cis-11-hexadecenoic acid.

Trichilianones A-D, Novel Cyclopropane-Type Limonoids from Trichilia adolfi.

The fractionation of an ethanol extract of the bark of Trichilia adolfi yielded four novel limonoids (trichilinones A-D, 1-4), with five fused rings and related to the hortiolide-type limonoids. Starting with an ε-lactone, which is α,ß-unsaturated in trichilinones A and D (1 and 4), attached to a tetrahydrofuran ring that is connected to an unusual bicyclo [5.1.0] hexane system, joined with a cyclopentanone with a 3-furanyl substituent [(2-oxo)-furan-(5H)-3-yl in trichilinone D (4)], the four compounds isolated display a new 7/5/3/5/5 limonoid ring system. Their structures were established based on extensive analysis of NMR spectroscopic data. As the crude extract possessed anti-leishmanial properties, the compounds were assayed for cytotoxic and anti-parasitic activities in vitro in murine macrophages cells (Raw 264.7) and leishmania promastigotes (L. amazoniensis and L. braziliensis), respectively. The compounds showed moderate cytotoxicity (approximately 70 µg/mL), but are not responsible for the leishmanicidal effect of the extract.

Formation of a Thiol-Ene Addition Product of Asthma Medication Montelukast Caused by a Widespread Tin-Based Thermal Stabilizer.

We report the formation and characterization of two diastereomeric thiol-ene addition products of the asthma medication Montelukast within chewing tablets. Widespread tin-based thermal stabilizers dioctyltin bis(2-ethylhexyl thioglycolate) and monooctyltin tris(2-ethylhexyl thioglycolate), used in the manufacturing process of the medication's forming foil, were identified as the source of the thiol reactant, showing that these stabilizers may play a part in the degradation of Montelukast and APIs with functionalities similar to those of Montelukast, which should be considered during development of medication. The isolation and analysis of these impurities was performed by HPLC and UV-vis spectroscopy. HRMS and NMR data were collected to characterize and determine the structures of these compounds.

Effects of plant growth regulator application on the malting quality of barley.

BACKGROUND: Lodging can negatively affect yield and quality of barley grain. Synthetic plant growth regulators (PGRs) reduce lodging by producing shorter, thicker, and stronger stems. However, the impact of applying PGRs on malting performance of barley is not known. The objective of this work was to assess the effect of application of three PGRs (ethephon, chlormequat chloride, and trinexapac-ethyl) in combination with different seeding rates on the malting quality of barley grown in several locations and years in western Canada. RESULTS: The kernel weight in PGR-treated barley was reduced by 1.7% to 6.5% compared with the nontreated grain. Application of PGRs had no effect on the concentration of proteins and germination energy. Seeding rates significantly affected kernel weight, protein content, and germination index (GI), but no interactions between PGRs and seeding rates were observed. The smaller kernels of ethephon- and trinexapac-treated barley showed good hydration and grain modification during malting, as indicated by high levels of starch-converting enzymes, high Kolbach indices, and low levels of wort ß-glucans. Overall, the fine extract of malt from PGR-treated barley was slightly lower than that of the control malt; however, the extract reduction was statistically significant only for chlormequat- and trinexapac-treated barley. CONCLUSIONS: The application of PGRs had significant effects on kernel plumpness and kernel weight, but the effects of PGR application on the malting quality were generally small and insignificant. The decision of PGRs application on malting barley needs to be considered in combination with potential benefits of PGRs in mitigating lodging and their effects on the agronomic performance of barley. © Her Majesty the Queen in Right of Canada 2019.

Localization of Cyclopropane Modifications in Bacterial Lipids via 213 nm Ultraviolet Photodissociation Mass Spectrometry.

Subtle structural features in bacterial lipids such as unsaturation elements can have vast biological implications. Cyclopropane rings have been correlated with tolerance to a number of adverse conditions in bacterial phospholipids. They have also been shown to play a major role in Mycobacterium tuberculosis ( M. tuberculosis or Mtb) pathogenesis as they occur in mycolic acids (MAs) in the mycobacterial cell. Traditional collisional activation methods allow elucidation of basic structural features of lipids but fail to reveal the presence and position of cyclopropane rings. Here, we employ 213 nm ultraviolet photodissociation mass spectrometry (UVPD-MS) for structural characterization of cyclopropane rings in bacterial phospholipids and MAs. Upon UVPD, dual cross-ring C-C cleavages on both sides of the cyclopropane ring are observed for cyclopropyl lipids, resulting in diagnostic pairs of fragment ions spaced 14 Da apart, thus enabling cyclopropane localization. These diagnostic pairs of ions corresponding to dual cross-ring cleavage are observed in both negative and positive ion modes and afford localization of multiple cyclopropane rings within a single lipid. This method was integrated with liquid chromatography (LC) for LC/UVPD-MS analysis of cyclopropyl glycerophospholipids in Escherichia coli ( E. coli) and for analysis of MAs in Mycobacterium bovis ( M. bovis) and M. tuberculosis lipid extracts.

Raman spectroscopy as a tool for tracking cyclopropane fatty acids in genetically engineered Saccharomyces cerevisiae.

Cyclopropane fatty acids (CFAs) are a group of lipids with unique physical and chemical properties between those of saturated and monounsaturated fatty acids. The distinctive physicochemical characteristics of CFAs (e.g. oxidative stability, self-polymerization at high temperatures, etc.) results from the presence of a cyclopropane ring within their structure making them highly useful in industrial applications. CFAs are present in several species of plants and bacteria and are typically detected with standard lipid profiling techniques, such as gas or liquid chromatography. In this work we investigated several strains of S. cerevisiae, genetically modified to introduce the production of CFAs, in comparison to control strain using confocal Raman spectroscopy (CRS). The aim of our work was to demonstrate the potential of CRS not only to detect changes introduced due to the CFAs presence, but also to track CFAs within the cells. We present for the first time Raman and IR spectra of CFA standard (cis-9,10-methyleneoctadecanoic acid), completed with quantum chemical calculations and band assignment. We identified marker bands of CFA (e.g. 2992, 1222, 942 cm-1) attributed to the vibrations of the cyclopropyl ring. Furthermore, we analysed lipid bodies (LBs) from modified and control yeast using CRS imaging and identified multiple changes in size, number and composition of LBs from engineered strains. We observed a significant reduction in the degree of unsaturation of LBs using the ratio of bands located at 1660 cm-1 (ν(C[double bond, length as m-dash]C)) and 1448 cm-1 (δ(CH2)) in the modified cell lines. In addition, we were able to detect the presence of CFAs in LBs, using the established marker bands. CRS shows tremendous potential as technique to identify CFAs in lipid bodies providing a new way to track lipid production in genetically modified single yeast cells.

Presence of cyclopropane fatty acids in foods and estimation of dietary intake in the Italian population.

Cyclopropane fatty acids (CPFAs) are the most abundant cyclic fatty acids in microorganisms with unknown role(s) regarding their dietary relevance and biological effects in humans. This work was aimed to draw up a list of CPFAs-containing foods for estimating their dietary intake in the Italian population to provide a basis for evaluating their nutritional relevance and potential health-related effects. The CPFAs content of more than 500 food items was investigated and a preliminary dietary intake was assessed (12.0 ± 6.0 mg/day), based on the data reported by the Italian National Food Consumption Survey INRAN-SCAI 2005-06. CPFAs should be considered of dietary relevance in view of their potential physiological activity in humans and their presence in significant amounts in dairy products, as Grana Padano cheese (9.0-30.0 mg/100 g), and in bovine meat (0.7-4.0 mg/100 g). Future studies should elucidate whether this uncommon class of fatty acids has a biological role in human health.

Influence of static magnetic field exposure on fatty acid composition in Salmonella Hadar.

We have been interested, in this work, to investigate the effect of the exposure to static magnetic field at 200 mT (SMF) on the fatty acid (FA) composition of Salmonella enterica subsp Enterica serovar Hadar isolate 287: effects on the proportion of saturated and unsaturated fatty acids (SFAs, UFAs), cyclopropane fatty acids (CFAs) and hydroxy fatty acids after exposure to the static magnetic field at 200 mT (SMF). Analysis with Gas Chromatography-Mass Spectrometry (GC-MS) of total lipid showed that the proportion of the most fatty acids was clearly affected. The comparison of UFAs/SFAs ratio in exposed bacteria and controls showed a diminution after 3 and 6 h of exposure. This ration reached a balance after 9 h of treatment with SMF. So we can conclude that S. Hadar tries to adapt to magnetic stress by changing the proportions of SFAs and UFAs over time to maintain an equilibrium after 9 h of exposure, thus to maintain the inner membranes fluidity. Also, a decrease in the proportion of hydroxy FAs was observed after 6 h but an increase of this proportion after 9 h of exposure. Concerning CFAs, its proportion raised after 6 h of exposure to the SMF but it decreased after 9 h of exposure. These results are strongly correlated with those of cfa (cyclopropane fatty acid synthase) gene expression which showed a decrease of its expression after 9 h of exposure.

Gas chromatography/negative chemical ionization mass spectrometry of transfluthrin in rat plasma and brain.

RATIONALE: Transfluthrin is a relatively non-toxic rapid-acting synthetic pyrethroid insecticide. It is widely used in household and hygiene products. A sensitive and accurate bioanalytical method is required for quantification of its concentration in plasma and its potential target organ, the brain for studies to assess its health effects and toxicokinetics in mammals. METHODS: The samples were prepared by liquid-liquid extraction. Gas chromatography mass spectrometry (GC/MS) analysis was performed for the determination of transfluthrin in biological samples with an overall method run time of 15 min. Transfluthrin was quantified using selected-ion monitoring (SIM) in the negative chemical ionization (NCI) mode. Chromatographic separation was achieved using a Zebron® ZB5-MS GC column operating with 1 mL/min constant flow helium. Cis-Permethrin was used as the internal standard. RESULTS: The method was validated to be precise and accurate within the linear range of 1.0-400.0 ng/mL in plasma and 4.0-400.0 ng/mL in brain homogenate, based on a 100 µL sample volume for both matrices. This method was applied to samples following administration of a 10 mg/kg oral dose to male adult rats. The plasma concentrations were observed to be 11.70 ± 5.69 ng/mL and brain concentrations 12.09 ± 3.15 ng/g when measured 2 h post-dose. CONCLUSIONS: A rapid GC/NCI-MS method was demonstrated to be sensitive, specific, precise and accurate for the quantification of transfluthrin in rat plasma and brain. The optimized method was successfully used to quantify the rat plasma and brain concentrations of transfluthrin 2 h after the oral dosing of Sprague-Dawley rats.

Fate and transport of furrow-applied granular tefluthrin and seed-coated clothianidin insecticides: Comparison of field-scale observations and model estimates.

The transport of agricultural insecticides to water bodies may create risk of exposure to non-target organisms. Similarly, widespread use of furrow-applied and seed-coated insecticides may increase risk of exposure, yet accessible exposure models are not easily adapted for furrow application, and only a few examples of model validation of furrow-applied insecticides exist using actual field data. The goal of the current project was to apply an exposure model, the Pesticide in Water Calculator (PWC), to estimate the concentrations of two in-furrow insecticides applied to maize: the granular pyrethroid, tefluthrin, and the seed-coated neonicotinoid, clothianidin. The concentrations of tefluthrin and clothianidin in surface runoff water, sampled from a field in central Illinois (USA), were compared to the PWC modeled pesticide concentrations in surface runoff. The tefluthrin concentrations were used to optimize the application method in the PWC, and the addition of particulate matter and guttation droplets improved the models prediction of clothianidin concentrations. Next, the tefluthrin and clothianidin concentrations were calculated for a standard farm pond using both the optimized application method and the application methods provided in PWC. Estimated concentrations in a standard farm pond varied by a factor of 100 for tefluthrin and 50 for clothianidin depending on the application method used. The addition of guttation droplets and particulate matter to the model increased the annual clothianidin concentration in a standard farm pond by a factor of 1.5, which suggested that these transport routes should also be considered when assessing neonicotinoid exposure.

Monitoring phosphodiesterase-4 inhibitors using liquid chromatography/(tandem) mass spectrometry in sports drug testing.

RATIONALE: The recent discovery of resveratrol's capability to inhibit cAMP-specific phosphodiesterases (PDEs) and, as a consequence, to enhance particularly the activity of Sirt1 in animal models has reinforced the interest of preventive doping research organizations, especially in PDE4 inhibitors. Among these, the archetypical PDE4-inhibitor rolipram significantly increased the number of mitochondria in laboratory rodents, which further demonstrated a performance increase in a treadmill-test (time-to-exhaustion) of approximately 40%. Besides rolipram, a variety of new PDE4-inhibiting substances including cilomilast, roflumilast, and numerous additional new drug entities were described, with roflumilast being the first-in-class having received clinical approval for the treatment of chronic obstructive pulmonary disease (COPD). Due to the availability of these substances, and the fact that a misuse of such compounds in sport cannot be excluded, it deems relevant to probe for the prevalence of these compounds in sports drug testing programs. METHODS: Known urinary phase-I metabolites of rolipram, roflumilast, and cilomilast were generated by in vitro incubations employing human liver microsomal preparations. The metabolites obtained were studied by liquid chromatography with high-resolution/high-accuracy tandem mass spectrometry (LC/MS/MS) and the reference product ion mass spectra of established and most relevant metabolites were utilized to provide the information necessary for comprehensive doping controls. The analytical procedure was based on conventional routine doping control assays employing enzymatic hydrolysis followed by liquid-liquid extraction and subsequent LC/MS/MS measurement. RESULTS: Structures of diagnostic product ions and dissociation pathways of target analytes were elucidated, providing the information required for implementation into an existing test method for routine sports drug testing. The established method allowed for detection limits for the intact drugs of 1-5 ng/mL, and further assay characteristics (intraday precision 1.5-13.7%, interday precision 7.3-18.6%, recovery 20-100%, ion suppression/enhancement, and specificity) were determined. In addition, proof-of-concept analyses concerning roflumilast were conducted with a urine sample obtained from a COPD patient under roflumilast treatment.

Innovation of novel 'Tab in Tab' system for release modulation of milnacipran HCl: optimization, formulation and in vitro investigations.

The study was aimed toward development of modified release oral drug delivery system for highly water soluble drug, Milnacipran HCl (MH). Novel Tablet in Tablet system (TITs) comprising immediate and extended release dose of MH in different parts was fabricated. The outer shell was composed of admixture of MH, lactose and novel herbal disintegrant obtained from seeds of Lepidium sativum. In the inner core, MH was matrixed with blend of hydrophilic (Benecel®) and hydrophobic (Compritol®) polymers. 3² full factorial design and an artificial neuron network (ANN) were employed for correlating effect of independent variables on dependent variables. The TITs were characterized for pharmacopoeial specifications, in vitro drug release, SEM, drug release kinetics and FTIR study. The release pattern of MH from batch A10 containing 25.17% w/w Benecel® and 8.21% w/w of Compritol® exhibited drug release pattern close proximal to the ideal theoretical profile (t(50%) = 5.92 h, t(75%) = 11.9 h, t(90%) = 18.11 h). The phenomenon of drug release was further explained by concept of percolation and the role of Benecel® and Compritol® in drug release retardation was studied. The normalized error obtained from ANN was less, compared with the multiple regression analysis, and exhibits the higher accuracy in prediction. The results of short-term stability study revealed stable chataracteristics of TITs. SEM study of TITs at different dissolution time points confirmed both diffusion and erosion mechanisms to be operative during drug release from the batch A10. Novel TITs can be a succesful once a day delivery system for highly water soluble drugs.

Identification of novel polyfluoroalkyl substances in surface water runoff from a chemical stockpile fire.

In 2018, over 30,000 L of fluorine-free firefighting foam was used to extinguish an industrial warehouse fire of uncharacterized chemical and industrial waste. Contaminated firewater and runoff were discharged to an adjacent freshwater creek in Melbourne, Australia. In this study, we applied nontarget analysis using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QToF-MS) to 15 surface water samples to investigate the presence of legacy, novel and emerging per-and polyfluoroalkyl substances (PFAS). We identified six novel and emerging fluorotelomer-based fluorosurfactants in the Australian environment for the first time, including: fluorotelomer sulfonamido betaines (FTABs or FTSA-PrB), fluorotelomer thioether amido sulfonic acids (FTSASs), and fluorotelomer sulfonyl amido sulfonic acids (FTSAS-So). Legacy PFAS including C6-C8 perfluoroalkyl sulfonic acids, C4-C10 perfluoroalkyl carboxylic acids, and perfluoro-4-ethylcyclohexanesulfonate were also detected in surface water. Of note, we report the first environmental detection of ethyl 2-ethenyl-2-fluoro-1-(trifluoromethyl) cyclopropane-1-carboxylate. Analysis of several Class B certified fluorine-free foam formulations allowed for use in Australia revealed that there was no detectable PFAS. Patterns in the homologue profiles of fluorotelomers detected in surface water are consistent with environments impacted by fluorinated aqueous film-forming foams. These results provide strong evidence that firewater runoff of stockpiled fluorinated firefighting foam was the dominant source of detectable PFAS to the surrounding environment.

Regioselective and stereoselective cyclizations of cyclohexadienones tethered to active methylene groups.

The cyclization of 2,5-cyclohexadienones tethered to activated methylene groups was studied. The substitution around the cyclohexadienone ring serves to regioselectively direct these cyclizations based primarily on electronic effects. In the case of brominated substrates, these reactions proceed to give highly unusual electron-deficient tricyclic cyclopropanes. By using a Cinchona alkaloid-based phase-transfer catalyst, prochiral cyclohexadienones can be desymmetrized with moderate stereoselectivity.

Enhancement of phenol degradation by soil bioaugmentation with Pseudomonas sp. JS150.

AIMS: To test whether bioaugmentation with genetically modified Pseudomonas sp. JS150 strain could be used to enhance phenol degradation in contaminated soils. METHODS AND RESULTS: The efficiency of phenol removal, content of humic carbon, survival of inoculant, number of total culturable autochthonous bacteria and changes in fatty acid methyl esters (FAME) profiling obtained directly from soils were examined. Bioaugmentation significantly accelerated phenol biodegradation rate in tested soils. Phenol applied at the highest concentration (5.0 mg g(-1) soil) was completely degraded in clay soil (FC) within 65 days, whereas in sand soil (FS) within 72 days. In comparison, phenol biodegradation proceeded for 68 and 96 days in nonbioaugmented FC and FS soils, respectively. The content of humic carbon remained at the same level at the beginning and the end of incubation time in all soil treatments. The number of introduced bacteria (2.50 × 10(9) g(-1) soil) markedly decreased during the first 4 or 8 days depending on contamination level and type of soil; however, inoculant survived over the experimental period of time. Analysis of FAME patterns indicated that changes in the percentages of cyclopropane fatty acids 17:0 cy and 19:0 cyω10c and branched fatty acids might be useful markers for monitoring the progress of phenol removal from soil. CONCLUSIONS: It was confirmed that soil bioaugmentation with Pseudomonas sp. JS150 significantly enhanced soil activity towards phenol degradation. Cyclopropane and branched fatty acids were sensitive probes for degree of phenol utilization. SIGNIFICANCE AND IMPACT OF THE STUDY: In future, genetically modified Pseudomonas sp. JS150 strain could be of use in the bioaugmentation of phenol-contaminated areas.

Chemical diversity in the essential oil of Indian valerian (Valeriana jatamansi Jones).

To explore the diversity in the essential oil yield and composition of Valeriana jatamansi Jones (syn. V. wallichii DC) growing wild in Uttarakhand (Western Himalaya), 17 populations were collected from different locations and grown under similar conditions. Comparative results showed considerable variations in the essential oil yield and composition. The essential oil yield varied from 0.21 to 0.46% in the fresh roots and rhizomes of different populations of V. jatamansi. Analysis of the essential oils by GC (RI) and GC/MS and the subsequent classification by principal component analysis (PCA) resulted in six clusters with significant variations in their terpenoid composition. Major components in the essential oils of the different populations were patchouli alcohol (1; 13.4-66.7%), α-bulnesene (3; <0.05-23.5%), α-guaiene (4; 0.2-13.3%), guaiol (5; <0.05-12.2%), seychellene (6; 0.2-9.9%) viridiflorol (<0.05-7.3%), and ß-gurjunene (7; 0.0-7.1%). V. jatamansi populations with contents of 1 higher than 60% may be utilized commercially in perfumery.

Electrochemical Behavior and Square-Wave Stripping Voltammetric Determination of Roflumilast in Pharmaceutical Dosage Forms.

BACKGROUND: Bronchial asthma and chronic obstructive pulmonary disease (COPD) are among the most common chronic diseases. Roflumilast is a novel, potent, selective, and long-acting phosphodiesterase 4 (PDE-4) inhibitor for the treatment of bronchial asthma and COPD. It has anti-inflammatory effects, and it has been shown to reduce exacerbations and improve pulmonary function in patients with COPD. Although there have been some other analytical methodologies reported for the determination of roflumilast in pharmaceutical dosage forms, there has not yet been any electrochemical methodology proposed for determination of this unique active pharmaceutical ingredient in its dosage forms. OBJECTIVE: The aim of this study was to develop an easily applied, selective, sensitive, accurate, and precise square-wave stripping voltammetric (SWSV) method for the determination of roflumilast in its pharmaceutical dosage forms. In addition, the electrochemical behavior of roflumilast was investigated. METHODS: The proposed method was based on electrochemical reduction of roflumilast at a hanging mercury drop electrode (HMDE) in 0.1 M K2HPO4 and 0.1 M Na2B4O7 (1:1, v/v) buffer at pH 5.0. Two reduction peaks were observed at -1150 mV and -1260 mV with 30 s of accumulation time and -850 mV of accumulation potential time versus Ag/AgCl reference electrode. RESULTS: The highest peak current values with the best peak definition were observed at a frequency of 50 Hz, scan increment of 5 mV, and pulse amplitude 25 mV. The proposed method was validated by evaluating validation parameters such as linearity, sensitivity, repeatability, accuracy, precision, selectivity, recovery, robustness, and ruggedness. A good linear correlation (r=0.9948) was obtained between the electrochemical response of roflumilast and its concentration in the range of 0.74-3.05 µg mL-1 under the optimum conditions. The obtained accuracy results were between 2.04% and -2.04% while the relative standard deviation of the results was at least 2.78% for intraday and inter-day studies. The mean recovery for the real applications was 100.63% ± 0.52. The electrochemical behavior of roflumilast was investigated by cyclic voltammetry. The cyclic voltammogram of roflumilast exhibited two peaks and the reduction reaction was reversible. CONCLUSION: This developed and validated SWSV method was applied successfully for the determination of roflumilast in tablet dosage form (Daxas®) to assess active roflumilast content. Since high- -performance liquid chromatography is a dominant technique in industry for quality control of active pharmaceutical ingredients, the finding in the present study demonstrated that square-wave stripping voltammetry could be easily utilized in routine applications to determine roflumilast content in its dosage forms.

Simultaneous spectrophotometric quantitative analysis of elbasvir and grazoprevir using assisted chemometric models.

Artificial neural networks and genetic algorithm artificial neural networks, chemometric assisted spectrophotometric models, were developed for the quantitative analysis of elbasvir and grazoprevir in their newly FDA approved pharmaceutical dosage form. The UV absorption spectra of elbasvir and grazoprevir show severe degree of overlap which caused difficulty for selecting certain spectrophotometric method with advantage of simultaneous quantitative analysis of the cited drugs. After extensive study and many experimental trials, artificial neural networks and genetic algorithm artificial neural networks were the suitable models for the quantitative analysis of studied drugs in their binary mixture. Experimental design and constructing the calibration and validation sets of the binary mixture were achieved to implement the proposed models. The models were optimized with the aid of five-levels, two factors experimental design. The designed models were successfully applied to the quantitative analysis of Zepatier® tablets. The results were statistically compared with another reported HPLC quantitative analytical method with no significant difference by applying Student t-test and variance ratio F-test.

Determination of 1-methylcyclopropene residues in vegetables and fruits based on iodine derivatives.

An innovative method was established for the determination of 1-methylcyclopropene (1-MCP) in vegetables and fruits. Due to its small molecular weight and low boiling point, it was difficult to obtain quantitative analysis for 1-MCP, especially at the residual level. In this work, based on its iodine derivatives, 1-MCP was derived to 1,2-diiodo-1-methylcyclopropane, which was much easier for trace and accurate chromatographic analysis. During the method validation, the method validation results were satisfactory in terms of linearity (4 ~ 400 µg/L, and R2 ≥ 0.959), matrix effect (-89% ~ -13%), accuracy (80 ~ 100%), sensitivity (limits of quantification, 5 µg/kg) and precision (relative standard deviations ≤ 19%), which was in accordance with the Chinese guidelines for the testing of pesticide residues in crops. Finally, the proposed analytical method was used to monitor the 1-MCP residue levels in commercially available samples, and all the values were below 5 µg/kg, which satisfied the EU or Japan MRLs of 1-MCP.

A Review of Different Analytical Techniques for Fexofenadine Hydrochloride and Montelukast Sodium in Different Matrices.

Fexofenadine hydrochloride is an antihistamine agent used for the treatment of allergic disorders like rhinitis. It is a second generation antihistamine. Montelukast sodium is an anti-asthmatic agent and leukotriene receptor antagonist used in the treatment of respiratory disorders. This article exemplifies the reported analytical methods like electrometric methods, ultraviolet spectroscopy, mass spectroscopy, thin layer chromatography, high performance liquid chromatography, high performance thin layer chromatography and tandem spectroscopy for determination of fexofenadine HCl and montelukast sodium in dosage form and in biological matrices. This review covers almost all the analytical methods for fexofenadine hydrochloride and montelukast sodium form 1968-2018 years. Complete analytical validation parameters reported are discussed in this review for both analytes. Among various analytical methods, HPLC and UV-visible spectrophotometry were found to be the most extensively used methods by the researchers.