Modeling and optimization of the coagulation/flocculation process in turbidity removal from water using poly aluminum chloride and rice starch as a natural coagulant aid.

The application of the coagulation/flocculation process is very important due to its simplicity in removing turbidity. Due to the disadvantages of using chemical coagulants in water and the lack of sufficient effect of natural materials alone in removing turbidity for proper performance, the simultaneous use of chemical and natural coagulants is the best way to reduce the harmful effects of chemical coagulants in water. In this study, the application of poly aluminum chloride (PAC) as a chemical coagulant and rice starch as a natural coagulant aid to remove turbidity from aqueous solutions was investigated. Effects of the above coagulants on the four main factors, coagulant dose (0-10 mg/L), coagulant adjuvant dose (0-0.1 mg/L), pH (5-9), turbidity (NTU 0-50), and each five levels were assessed using a central composite design (CCD). Under the optimized conditions, the maximum turbidity elimination efficiency was found to be 96.6%. The validity and adequacy of the proposed model (quadratic model) were confirmed by the corresponding statistics (i.e., F-value of 23.3, p-values of 0.0001, and lack of fit of 0.877 for the model, respectively, R2 = 0.88, R2adj. = 0.84, R2 pred = 0.79, AP = 22.04).

Novel cyclic thiourea derivatives of aminoalcohols at the presence of AlCl3 catalyst as potent α-glycosidase and α-amylase inhibitors: Synthesis, characterization, bioactivity investigation and molecular docking studies.

The article is devoted to the targeted synthesis and study of cyclic thiourea and their various new derivatives as new organic compounds containing polyfunctional group in the molecule. First time the reaction of the corresponding synthesized pyrimidinethione with 1,2-epoxy-3-chlorpropane at the presence of AlCl3 catalyst in 75-80% yield alkyl-1-(3-chloro-2-hydroxypropyl)-4-alkyl-6-phenyl-2-thioxo-1,2,5,6- tetrahydropyrimidine-5-carboxylates. In the next stage, new cyclic thiourea derivatives of aminoalcohols were synthesised from the reaction of chlorinated derivatives of pyrimidinethiones with single amines and their structures were investigated by spectroscopic methods. In this study, a series of novel compounds were tested towards some metabolic enzymes including α-glycosidase (α-Gly) and α-amylase (α-Amy) enzymes. Novel compounds showed Kis in ranging of 10.43 ± 0.94-111.37 ± 13.25 µM on α-glycosidase and IC50 values in ranging of 14.38-106.51 µM on α-amylase. The novel cyclic thiourea derivatives of aminoalcohols had effective inhibition profiles against all tested metabolic enzymes. Binding affinity and inhibition mechanism of the most active compounds were detected with in silico studies and have shown that 2-Hydroxypropyl and butan-1-aminium moieties play a key role for inhibition of the enzymes.

Process Development and Synthesis of Process-Related Impurities of an Efficient Scale-Up Preparation of 5,2'-Dibromo-2,4',5'-Trihydroxy Diphenylmethanone as a New Acute Pyelonephritis Candidate Drug.

Based on a foregoing gram-scale laboratory process, an efficient scale-up preparation process of 5,2'-dibromo-2,4',5'-trihydroxydiphenylmethanone (LM49-API), a new acute pyelonephritis candidate drug, was developed and validated aiming to reduce by-products and achieve better impurity profiles. Meanwhile, the polymorph of LM49-API and process-related impurities were also investigated. Ultimately, the optimal reaction conditions were verified by evaluating the impurity profiles and their formation during the synthesis. Six process-related impurities were synthesized and identified, being useful for the quality control of LM49-API. Its finalized preparation process was further validated at 329-410 g scale-up production in 53.4-57.1% overall yield with 99.95-99.98% high-performance liquid chromatography (HPLC) purity, and it is currently viable for commercial production. LM49-API-imC and LM49-API-imX were identified as the main single impurities in LM49-API, with the content controlled to be less than 0.03%.

Catechin Photolysis Suppression by Aluminum Chloride under Alkaline Conditions and Assessment with Liquid Chromatography-Mass Spectrometry.

Tea is rich in catechins and aluminum. In this study, the process of catechin photolysis was applied as a model for examining the effects of aluminum chloride (AlCl3) on the structural changes of catechin and the alteration of aluminum complexes under blue light irradiation (BLI) at pH 8 using liquid chromatography and mass spectrometry techniques. Additionally, the effects of anions on catechin upon the addition of AlCl3 and treatment with BLI were also studied. In this study, when 1 mM catechin was treated with BLI, a superoxide anion radical (O2•-) was generated in an air-saturated aqueous solution, in addition to forming a dimeric catechin (proanthocyanidin) via a photon-induced redox reaction. The relative percentage of catechin was found to be 59.0 and 95.7 for catechin treated with BLI and catechin upon the addition of 1 mM AlCl3 treated with BLI, respectively. It suggested that catechin treated with BLI could be suppressed by AlCl3, while AlCl3 did not form a complex with catechin in the photolytic system. However, under the same conditions, it was also found that the addition of AlCl3 inhibited the photolytic formation of O2•-, and reduced the generation of proanthocyanidin, suggesting that the disconnection of proanthocyanidin was achieved by AlCl3 acting as a catalyst under treatment with BLI. The influence of 1 mM fluoride (F-) and 1 mM oxalate (C2O42-) ions on the photolysis of 1 mM catechin upon the addition of 1 mM AlCl3 and treatment with BLI was found to be insignificant, implying that, during the photolysis of catechin, the Al species were either neutral or negatively charged and the aluminum species did not form a complex with anions in the photolytic system. Therefore, aluminum, which is an amphoteric species, has an inherent potential to stabilize the photolysis of catechin in an alkaline conditions, while suppressing the O2•- and proanthocyanidin generation via aluminum ion catalysis in the catechin/Al system under treatment with BLI.

Treatment of re-refining effluent from lubricating oils by combining electrocoagulation and coagulation-flocculation processes.

A combination of electrocoagulation and coagulation-flocculation processes was used for re-refining effluent from lubricating oils. The efficiency of the process was evaluated based on the chemical oxygen demand (COD), color, and turbidity of the refined effluent. Electrocoagulation (EC) and coagulation-flocculation parameters, such as the initial pH (3.00, 4.41, and 9.00), and current density (4, 9, and 16 A/m2), and the use of aluminum polychloride coagulant and superfloc A300 flocculant were studied. EC performed at pH 9, with a current density of 16 A/m2 and 7 V, resulted in removal efficiencies of 85.14%, 99.81%, and 99.85%, for COD, color, and turbidity, respectively. The removal efficiencies increased to 96%, 99.87%, and 99.94% for COD, color, and turbidity, respectively, by the further coagulation-flocculation treatment in the presence of 13.8 mg/L aluminum polychloride coagulant and 80 mg/L Superfloc A300 flocculant.

Evolution of Interactions in the Protein Solution As Induced by Mono and Multivalent Ions.

The evolution of interactions in the bovine serum albumin (BSA) protein solution on addition of mono and multivalent (di, tri and tetra) counterions has been studied using small-angle neutron scattering (SANS), dynamic light scattering (DLS) and ζ-potential measurements. It is found that in the presence of mono and divalent counterions, protein behavior can be well explained by DLVO theory, combining the contributions of screened Coulomb repulsion with the van der Waals attraction. The addition of mono or divalent salts in protein solution reduces the repulsive barrier and hence the overall interaction becomes attractive, but the system remains in one-phase for the entire concentration range of the salts, added in the system. However, contrary to DLVO theory, the protein solution undergoes a reentrant phase transition from one-phase to a two-phase system and then back to the one-phase system in the presence of tri and tetravalent counterions. The results show that tri and tetravalent (unlike mono and divalent) counterions induce short-range attraction between the protein molecules, leading to the transformation from one-phase to two-phase system. The two-phase is characterized by the fractal structure of protein aggregates. The excess condensation of these higher-valent counterions in the double layer around the BSA causes the reversal of charge of the protein molecules resulting into reentrant of the one-phase, at higher salt concentrations. The complete phase behavior with mono and multivalent ions has been explained in terms of the interplay of electrostatic repulsion and ion-induced short-range attraction between the protein molecules.

Topical Aluminum Chloride and Monsel's Solution Block Toluidine Blue Staining in Mohs Frozen Sections: Mechanism and Solution.

BACKGROUND: A diminished-staining artifact is observed in some Mohs frozen sections that are stained in toluidine blue (T-blue). Such an artifact, not yet described in the literature, may interfere with a Mohs surgeon's accurate reading. The authors hypothesize that topical hemostatic agents, aluminum chloride, and Monsel's solution are the causative factors. OBJECTIVE: To evaluate the aforementioned topical hemostatic agents as a potential cause of the nonstaining artifact, to propose the mechanism associated with this phenomenon, and to develop a method to prevent or rectify the problem. MATERIALS AND METHODS: Leftover Mohs frozen sections and specimens were treated with aluminum chloride or Monsel's solution and processed with routine Mohs histology. RESULTS: Nonstaining artifact is reproduced in aluminum chloride or Monsel's solution-treated ex vivo skin specimens. The authors found that ethylenediaminetetraacetic acid (EDTA), a chelating agent, can reverse the staining blockage. Such a finding suggests that aluminum or ferric cations bind to tissue and subsequently inhibit T-blue from interacting with the tissue. Direct binding of ferric cations to the tissue section is demonstrated with Prussian blue iron staining. CONCLUSION: By rinsing Mohs frozen sections in an EDTA solution before T-blue staining, the authors could prevent hemostatic agent-induced nonstaining. Applying an EDTA wash and restaining the slides can correct the same artifact.

Centella asiatica Protects d-Galactose/AlCl3 Mediated Alzheimer's Disease-Like Rats via PP2A/GSK-3ß Signaling Pathway in Their Hippocampus.

Alzheimer's disease (AD) is a progressive neurodegenerative disorder more prevalent among the elderly population. AD is characterised clinically by a progressive decline in cognitive functions and pathologically by the presence of neurofibrillary tangles (NFTs), deposition of beta-amyloid (Aß) plaque and synaptic dysfunction in the brain. Centella asiatica (CA) is a valuable herb being used widely in African, Ayurvedic, and Chinese traditional medicine to reverse cognitive impairment and to enhance cognitive functions. This study aimed to evaluate the effectiveness of CA in preventing d-galactose/aluminium chloride (d-gal/AlCl3) induced AD-like pathologies and the underlying mechanisms of action were further investigated for the first time. Results showed that co-administration of CA to d-gal/AlCl3 induced AD-like rat models significantly increased the levels of protein phosphatase 2 (PP2A) and decreased the levels of glycogen synthase kinase-3 beta (GSK-3ß). It was further observed that, CA increased the expression of mRNA of Bcl-2, while there was minimal effect on the expression of caspase 3 mRNA. The results also showed that, CA prevented morphological aberrations in the connus ammonis 3 (CA 3) sub-region of the rat's hippocampus. The results clearly demonstrated for the first time that CA could alleviate d-gal/AlCl3 induced AD-like pathologies in rats via inhibition of hyperphosphorylated tau (P-tau) bio-synthetic proteins, anti-apoptosis and maintenance of cytoarchitecture.

Innovative wearable solutions: Semi-releasing ion-conductive lignin hydrogel sensors for enhanced practicability.

The severe negative effects of impurities adhering to the external surface of wearable devices can significantly influence the signal transmission, performance, and lifespan of hydrogel sensors. Herein, we developed an ion-conducting hydrogel sensor with a strong adhesive side and a non-adhesive side, similar to a "semi-releasing material." This hydrogel, formulated using deep eutectic solvents obtained from choline chloride and acrylic acid, contained lignin. This versatile material, exhibiting properties similar to semi-releasing materials, was treated with an AlCl3 solution on one side. Additionally, the hydrogel was successfully used as a highly adhesive strain sensor for real-time monitoring of various human activity signals. Moreover, the hydrogel demonstrated excellent environmental tolerance and conductivity. Lignin extracted from wood flour endowed the hydrogel sensor with excellent adhesion energy (up to 427.1 J/m2) and UV resistance. Treatment of hydrogels with AlCl3 completely eliminated their adhesiveness, thereby enhancing fracture elongation and tensile strength. This improvement can be attributed to the absence of carboxyl groups and the formation of a metal-phenolic network. The implementation of this convenient and efficient strategy provides a more feasible approach to address challenges related to impurity adhesion and signal transmission in flexible wearable devices.

Dissolving-co-catalytic strategy for the preparation of flexible and wet-stable cellulose membrane towards biodegradable packaging.

In the realization of the goal of circular economy, cellulose as one of sustainable biomass resources, have attracted much attention because of their abundant sources, biodegradability and renewability. However, the mechanical and waterproof performance of cellulose-based materials are usually not satisfying, which limits their high-value utilization. In this study, cellulose membrane with high-performance from the aspects of mechanical properties, water-resistance ability, oxygen barrier capacity and biodegradability, was prepared from bleached hardwood pulp (HBKP) in a AlCl3/ZnCl2/H2O solution. The AlCl3/ZnCl2/H2O acted as both solvent and catalyst to dissolve cellulose and facilitate the chemical crosslinking of epichlorohydrin (EPI) with cellulose, thus improved the overall performance of the obtained cellulose membrane. The addition sequence, amount and crosslinking time of EPI during chemical crosslinking had important effects on the properties of the membranes. When 7 wt% EPI was crosslinked for 24 h, the tensile stress reached 133 MPa and the strain reached 17 %. Moreover, the membrane had excellent oxygen insulation down to (1.1 ± 0.31) × 10-4 cm3/m2·d·Pa, and good water-resistance ability, no obvious swelling behavior after 450 days of immersion in distilled water. Furthermore, the membrane could be degraded by microorganisms in about 20 days. This cellulose-based membrane offers a sustainable and biodegradable packaging material.

Ultra-strong hydroxypropyl cellulose/polyvinyl alcohol composite hydrogel by combination of triple-network and mechanical training.

To develop the hydrogels with high mechanical strength and excellent conductivity is always a challenging topic. In this study, the ultra-strong hydroxypropyl cellulose (HPC)/polyvinyl alcohol (PVA) composite hydrogels were prepared by combination of the triple-network and mechanical training. The proposed composite hydrogels were achieved by physically crosslinking HPC with PVA to form the first crosslinking network, in which the HPC fibers could decrease the crosslinking density of PVA matrix and generate a lot of water-rich porous area. Then, 2-hydroxyethyl acrylate (HEA), acrylamide (AM) and aluminium chloride diffused into the first network to fabricate the chemical crosslinking network and ionically cross-linked domains. The formation of triple-network enhanced the mechanical strength and toughness to 1.87 MPa and 339.09 kJ/m3, respectively. Especially, the crystalline domains of PVA chains could improve the hydrogel's fatigue resistance, and the orderly arrangement of the crystalline domains achieved through mechanical training process could further enhance the mechanical strength. The mechanical strength of pre-stretched composite hydrogel was increased up to 2.8 MPa. The composite hydrogels exhibit great applications in sensors, human-machine interactions, and wearable devices.

Peganum harmala enhanced GLP-1 and restored insulin signaling to alleviate AlCl3-induced Alzheimer-like pathology model.

Peganum harmala (P. harmala) is a folk medicinal herb used in the Sinai Peninsula (Egypt) as a remedy for central disorders. The main constituents, harmine and harmaline, have displayed therapeutic efficacy against Alzheimer's disease (AD); however, the P. harmala potential on sensitizing central insulin to combat AD remains to be clarified. An AD-like rat model was induced by aluminum chloride (AlCl3; 50 mg/kg/day for six consecutive weeks; i.p), whereas a methanolic standardized P. harmala seed extract (187.5 mg/kg; p.o) was given to AD rats starting 2 weeks post AlCl3 exposure. Two additional groups of rats were administered either the vehicle to serve as the normal control or the vehicle + P. harmala seed extract to serve as the P. harmala control group. P. harmala enhanced cognition appraised by Y-maze and Morris water maze tests and improved histopathological structures altered by AlCl3. Additionally, it heightened the hippocampal contents of glucagon-like peptide (GLP)-1 and insulin, but abated insulin receptor substrate-1 phosphorylation at serine 307 (pS307-IRS-1). Besides, P. harmala increased phosphorylated Akt at serine 473 (pS473-Akt) and glucose transporter type (GLUT)4. The extract also curtailed the hippocampal content of beta amyloid (Aß)42, glycogen synthase (GSK)-3ß and phosphorylated tau. It also enhanced Nrf2, while reduced lipid peroxides and replenished glutathione. In conclusion, combating insulin resistance by P. harmala is a novel machinery in attenuating the insidious progression of AD by enhancing both insulin and GLP-1 trajectories in the hippocampus favoring GLUT4 production.

Synergistic effect of photobiomodulation and phthalocyanine photosensitizer on fibroblast signaling responses in an in vitro three-dimensional microenvironment.

Photobiomodulation (PBM) is a promising medical treatment modality in the area of photodynamic therapy (PDT). In this study, we investigated the effect of combined therapy in a 3D microenvironment using aluminum chloride phthalocyanines (AlClPc) as the photosensitizing agent. Normal human fibroblast-containing collagen biomatrix was prepared and treated with an oil-in-water (o/a) AlClPc-loaded nanoemulsion (from 0.5 to 3.0 µM) and irradiated at a range of fluences (from 0.1 to 3.0 J/cm2) using a continuous-wave light-emitting diode (LED) irradiation system (660 nm). PBM at 1.2 J/cm2 and AlClPc/NE at 0.5 µM modified the fibroblast signaling response under 3D conditions, promoting collagen synthesis, ROS production, MMP-9 secretion, proliferation of the actin network, and facile myofibroblastic differentiation. PBM alone (at 1.2 J/cm2 and 0.3 J/cm2) had no significant effect on any of these parameters. The combined therapy affected myofibroblastic differentiation, inflammatory response, and extracellular matrix pliability, and should thus be examined further in subsequent studies considering that no side effects of PBM have been reported. Even though significant progress has been made in the field of phototherapy in recent years, it is necessary to further elucidate the detailed mechanisms underlying its effects already shown in 2D conditions to increase the acceptance of this beneficial and non-invasive therapeutic approach.

Facile synthesis and application of cellulosic coagulant from banana peels in cadmium-spiked water.

Cellulosic coagulant with low crystallinity and surface charge of -19.2 mV were extracted from wet banana peels (WBE) using kitchen-blending method. Functionalization with ferric chloride and aluminium chloride yielded higher surface charge of -23.8 mV (mWBE). Both WBE and mWBE coagulants were used to target cadmium ions from aqueous solution. Coagulants and the floccules (WBEA and mWBEA) were characterized by XRD, FT-IR, zeta sizer nano series, and SEM/EDs. The amount of cadmium ion coagulated was determined using ICP-OES. The FTIR analysis revealed the functional groups involved in the coordination and subsequent removal of the metals ions around 1634 cm-1, ascribed to the C = O vibrational band of carbonyl group. Microscopic analysis revealed that the mWBE is porous and exhibited microfibers with rod-like morphology. The effects of parameters such as the initial concentration, coagulant dosage and solution pH were investigated. Coagulation results showed that 10 mg of WBE and mWBE could remove about 80% and 90% of the Cd2+ ions respectively. However; the difference in the performance of both materials does not justify the essence of surface modification. Therefore, WBE is considered more efficient and environmentally friendly. Notwithstanding, the performance of these coagulants in real environmental samples will confirm their robustness.

Bromelain from Ananas comosus stem attenuates oxidative toxicity and testicular dysfunction caused by aluminum in rats.

BACKGROUND: Aluminum (Al) has been reported to induce testicular injury via oxidative stress. Ananas comosus stem extract is an inexpensive byproduct waste rich in bromelain which is a group of sulfur-containing enzymes known for its biological activities and medicinal applications. So, the current investigation aims to evaluate the efficacy of bromelain in counteracting oxidative injury and testicular dysfunction stimulated by aluminum in rats. METHODS: Male adult Wistar rats were divided into four groups. The first group used as control, however, the second and third groups were received bromelain (250 mg/kg) and AlCl3 (34 mg/Kg, 1/25 LD50), and the fourth group supplemented with bromelain one hour before AlCl3 intoxication, respectively. Bromelain was administered daily while AlCl3 was given every other day by oral gavages for one month. RESULTS: Al intoxicated animals revealed an elevation in lipid peroxidation (TBARS and H2O2) level and lactate dehydrogenase (LDH) activity. However, reduced glutathione (GSH) and protein contents, antioxidant enzymes (SOD, CAT, GPx, GR, GST), phosphatases (ALP, AcP) and aminotransferases (AST, ALT) activities were significantly reduced. Additionally, considerable amendments in hormonal levels (testosterone, luteinizing and follicle-stimulating hormone) and sperm characteristics were spotted. Further, histological variations in the testes section were detected and this supports the biochemical observations. Otherwise, rats supplemented with bromelain alone diminished TBARS and H2O2 and augmented mostly other parameters. Furthermore, supplementation with bromelain before Al intoxication in rats exhibited worthy betterment in oxidative stress markers, hormones, and sperm quality compared to Al treated group. CONCLUSION: In conclusion, bromelain had a powerful protective role against Al-induced testicular dysfunction so, it represents a novel approach in metal toxicity processing.

Aluminum and aluminum oxide nanomaterials uptake after oral exposure - a comparative study.

The knowledge about a potential in vivo uptake and subsequent toxicological effects of aluminum (Al), especially in the nanoparticulate form, is still limited. This paper focuses on a three day oral gavage study with three different Al species in Sprague Dawley rats. The Al amount was investigated in major organs in order to determine the oral bioavailability and distribution. Al-containing nanoparticles (NMs composed of Al0 and aluminum oxide (Al2O3)) were administered at three different concentrations and soluble aluminum chloride (AlCl3·6H2O) was used as a reference control at one concentration. A microwave assisted acid digestion approach followed by inductively coupled plasma mass spectrometry (ICP-MS) analysis was developed to analyse the Al burden of individual organs. Special attention was paid on how the sample matrix affected the calibration procedure. After 3 days exposure, AlCl3·6H2O treated animals showed high Al levels in liver and intestine, while upon treatment with Al0 NMs significant amounts of Al were detected only in the latter. In contrast, following Al2O3 NMs treatment, Al was detected in all investigated organs with particular high concentrations in the spleen. A rapid absorption and systemic distribution of all three Al forms tested were found after 3-day oral exposure. The identified differences between Al0 and Al2O3 NMs point out that both, particle shape and surface composition could be key factors for Al biodistribution and accumulation.

Impact of Al-based coagulants on the formation of aerobic granules: Comparison between poly aluminum chloride (PAC) and aluminum sulfate (AS).

As widely used Al-based coagulants, poly aluminum chloride (PAC) and aluminum sulfate (AS) were adopted in a short term at the start-up stage (from 10th to 16th) to enhance the formation of aerobic granules, and their effects on aerobic granulation were elucidated. The results suggested that both PAC and AS facilitated the granulation by improving the physicochemical properties of sludge. The reactor performance in pollutant removal was also enhanced. Specifically, in terms of extracellular polymeric substances (EPS), PAC dosing mainly stimulated the production of loosely bound EPS (LB-EPS), whereas more tightly bound EPS (TB-EPS) were secreted with the presence of AS. Based on the elemental analysis, polymeric Al hydrolyzed from PAC mainly worked on the exterior of microbial aggregates, and thus the attached aluminum in granules was gradually eliminated by ion exchange and hydraulic shear force. In contrast, the aluminum species in AS hydrolyzed into monomeric and oligomeric Al, and thus could diffuse into the interior of microbial aggregates and eventually created an "Al-core" in the granules. Overall, the present study describes the AGS formation with Al-based coagulants and the mechanisms of PAC- and AS-enhanced aerobic granulation.

Mechanism of the hybrid ozonation-coagulation (HOC) process: Comparison of preformed Al13 polymer and in situ formed Al species.

Because of the influence of hydrolysed species from Al-based coagulants on coagulation performance, the performance and mechanism of the developed hybrid ozonation-coagulation (HOC) process using AlCl3·6H2O and preformed Al13 as coagulants were investigated in this study, in which ozonation and coagulation occurred simultaneously within a single unit. It was found that the HOC process exhibited higher organic matter removal performance compared with coagulation and the pre-ozonation-coagulation process. It was found that the high ibuprofen (IBP) removal efficiency in the HOC process was mainly attributed to OH oxidation promoted by in situ formed hydrolysed aluminium species from AlCl3·6H2O and preformed Al13. Furthermore, the surface hydroxyl groups were determined to be the active reaction sites for the HOC process. Due to the higher proportion of surface hydroxyl groups for Al13, the HOC process with preformed Al13 as coagulants (Al13-HOC) exhibited a higher removal performance than that with AlCl3·6H2O as the coagulant (AlCl3-HOC). It was revealed that most of the generated O2- in the Al13-HOC was adsorbed on the surface of Al13 at different pH values, while a considerably lower proportion of adsorbed O2- was observed on the surface of in situ formed Al species from AlCl3·6H2O. Nevertheless, low proportions of adsorbed OH were found on the surfaces of both preformed Al13 and in situ formed Al species, indicating that the OH oxidation for the removal of organic pollutants occurred primarily in the aqueous phase.

Rice straw biochar modified by aluminum chloride enhances the dewatering of the sludge from municipal sewage treatment plant.

Enhancement of the dewatering of the sludge by using rice straw biochar (RSB) modified by aluminum chloride (AlCl3) was investigated, and the possible enhancing mechanisms were discussed. Results showed that the settled volume after 30 min (SV30%), specific resistance to filtration (SRF), moisture content (MC) and capillary suction time (CST) of the sludge were decreased and the net sludge solids yield (YN) was increased by the increasing raw or modified RSB, which indicated a higher sludge dewaterability. When the dosage of the modified RSB was adjusted to 0.3 g(RSB)/g(dry sludge), SV30%, SRF, MC and CST were decreased to 79.8%, 1.2 × 1012 m/kg, 81.4% and 38 s, respectively, YN was increased to 19.4 kg/(m2·h). Furthermore, performance of the modified RSB in the dewatering of the sludge was significantly better than that of the raw RSB. For the enhancing mechanisms, charge neutralization occurred when the modified RSB (loaded with positively charged aluminum species on its surface) was dosed into the sludge system, thus destroying the stable sludge colloidal system, thus far easier to congregate the sludge particles, which enhanced the dewatering of the sludge. Another main enhancing mechanism was that after conditioned by the modified RSB, certain skeleton structures were formed in sludge cake to make water pass through easily by decreasing the extracellular polymeric substances (EPS) of the sludge. We found that the effectiveness of using the modified RSB to enhance the dewatering of the sludge is substantial and promising.

Impact of mineral ions on the release of starch and gel forming capacity of potato flakes in relation to water dynamics and oil uptake during the production of snacks made thereof.

Potato flakes (PFs) are made by boiling, mashing and subsequent drying of steam peeled potatoes. Their cold-water swelling starch readily develops viscosity upon hydration. That potato starch amylopectin (AP) contains esterified phosphate groups results in rapid swelling and high viscosity of PF suspensions. This study is the first report on the impact of sodium, calcium and aluminum chloride on (i) the physicochemical properties of PFs and (ii) the water dynamics in relation to oil uptake in the production of deep-fried crisps made thereof. Adding 125 µmol cation/g PF dry matter (dm) of these salts to PF suspensions (8.0% dm) in a Rapid Visco Analyzer (RVA) decreased the peak viscosities by 5% (sodium chloride) and 20% (calcium or aluminum chloride). While monovalent cations shield the negative charges of the phosphate monoesters on the starch chains, divalent and trivalent cations bridge phosphate groups of adjacent AP molecules and thereby reduce swelling even further. Moreover, the latter ions result in up to 20% higher RVA cold paste viscosity readings even if they do not affect amylose (AM) aggregation. They thus enhance the gelation of PFs by AP bridging. For producing deep-fried crisps, PFs, emulsifier and maltodextrin were hydrated, mixed, sheeted into dough, and deep-fried. Including the above dosage of calcium ions in its recipe increased the specific strength of the dough sheet by about 15%. Time domain proton nuclear magnetic resonance analysis of dough sheets showed that these ions increase the rigidity of the starchy gel network while AM crystallization remains largely unaffected. This is evidence that ionic cross-linking of AP directly strengthens the dough sheet. Moreover, the calcium ions lowered the lipid content of the deep-fried crisps by about 5% due to stronger interaction of starch polymers with water. Ionic cross-linking of AP thus improves the gel forming capacity of PFs and strengthens the starchy gel network during manufacturing of potato-based snacks resulting in crisps with a significantly lower lipid content.