Ionic-surfactant-mediated electro-dewetting for digital microfluidics.

The ability to manipulate droplets on a substrate using electric signals1-known as digital microfluidics-is used in optical2,3, biomedical4,5, thermal6 and electronic7 applications and has led to commercially available liquid lenses8 and diagnostics kits9,10. Such electrical actuation is mainly achieved by electrowetting, with droplets attracted towards and spreading on a conductive substrate in response to an applied voltage. To ensure strong and practical actuation, the substrate is covered with a dielectric layer and a hydrophobic topcoat for electrowetting-on-dielectric (EWOD)11-13; this increases the actuation voltage (to about 100 volts) and can compromise reliability owing to dielectric breakdown14, electric charging15 and biofouling16. Here we demonstrate droplet manipulation that uses electrical signals to induce the liquid to dewet, rather than wet, a hydrophilic conductive substrate without the need for added layers. In this electrodewetting mechanism, which is phenomenologically opposite to electrowetting, the liquid-substrate interaction is not controlled directly by electric field but instead by field-induced attachment and detachment of ionic surfactants to the substrate. We show that this actuation mechanism can perform all the basic fluidic operations of digital microfluidics using water on doped silicon wafers in air, with only ±2.5 volts of driving voltage, a few microamperes of current and about 0.015 times the critical micelle concentration of an ionic surfactant. The system can also handle common buffers and organic solvents, promising a simple and reliable microfluidic platform for a broad range of applications.

Ultrasensitive amplification-free detection of circulating miRNA via droplet-based processing of SERS tag-miRNA-magnetic nanoparticle sandwich nanocomplexes on a paper-based electrowetting-on-dielectric platform.

MicroRNAs (miRNAs) have emerged as a promising class of biomarkers for early detection of various cancers, including ovarian cancer. However, quantifying miRNAs in human blood samples is challenging owing to the issues of sensitivity and specificity. In this study, hsa-miR-200a-3p of the miR-200a sub-family, which is a biomarker of ovarian cancer, was used as the analyte to demonstrate the analytical capability of an integrated biosensing platform using an extremely sensitive surface-enhanced Raman scattering (SERS) nanotag-nanoaggregate-embedded beads (NAEBs), magnetic nanoparticles (MNPs), a pair of highly specific locked nucleic acid (LNA) probes, and a semi-automated paper-based electrowetting-on-dielectric (pEWOD) device to provide labor-less and thorough sample cleanup and recovery. A sandwich approach where NAEBs are modified by one LNA-1 probe and MNPs are modified by another LNA-2 probe was applied. Then, the target analyte miRNA-200a-3p was introduced to form a sandwich nanocomplex through hybridization with the pair of LNA probes. The pEWOD device was used to achieve short cleanup time and good recovery of the nanocomplex, bringing the total analysis time to less than 30 min. The detection limit of this approach can reach 0.26 fM through SERS detection. The versatility of this method without the need for RNA extraction from clinical samples is expected to have good potential in detecting other miRNAs.

Combining sensors and actuators with electrowetting-on-dielectric (EWOD): advanced digital microfluidic systems for biomedical applications.

The concept of digital microfluidics (DMF) enables highly flexible and precise droplet manipulation at a picoliter scale, making DMF a promising approach to realize integrated, miniaturized "lab-on-a-chip" (LOC) systems for research and clinical purposes. Owing to its simplicity and effectiveness, electrowetting-on-dielectric (EWOD) is one of the most commonly studied and applied effects to implement DMF. However, complex biomedical assays usually require more sophisticated sample handling and detection capabilities than basic EWOD manipulation. Alternatively, combined systems integrating EWOD actuators and other fluidic handling techniques are essential for bringing DMF into practical use. In this paper, we briefly review the main approaches for the integration/combination of EWOD with other microfluidic manipulation methods or additional external fields for specified biomedical applications. The form of integration ranges from independently operating sub-systems to fully coupled hybrid actuators. The corresponding biomedical applications of these works are also summarized to illustrate the significance of these innovative combination attempts.

Achromatic doublet electrowetting prism array for beam steering device in foveated display.

A foveated display is a technology that can solve the problem of insufficient angular resolution (relative to the human eye) for near-eye display. In a high-resolution foveated display, a beam steering element is required to track the human gaze. An electrowetting prism array is a transmissive non-mechanical beam steering device, that allows a light and compact optical system to be configured and a large aperture possible. However, the view is obstructed by the sidewall of the prism array. When the size of the cell prism is 7mm, the prism array has an 87% fill-factor. To push the fill-factor to 100%, the cell prisms were magnified using a lens array. Image processing was performed such that the image produced by the lens array was identical to the original. Beam steering by refraction is accompanied by chromatic dispersion, which causes chromatic aberration, making colors appear blurry. The refractive index condition to reduce chromatic dispersion was obtained using the doublet structure of the electrowetting prism. The chromatic dispersion was reduced by 70% on average.

DC electric field-driven heartbeat phenomenon of gallium-based liquid metal on a floating electrode.

The heart beating phenomenon of room temperature liquid metal (LM) mercury has attracted much attention in the past years, but its research and application are limited because of the low vapor pressure and high toxicity. Here, a fundamental scientific finding is reported that the non-toxic eutectic gallium indium (EGaIn) alloy droplets beat periodically at a certain frequency based on a floating electrode under the stimulation of the direct current (DC) field. The essential characteristics of heart beating are the displacement and the projected area change of the LM droplet. The mechanism of this phenomenon is the self-regulation of interfacial tension caused by chemical oxidation, chemical corrosion, and continuous electrowetting. In this article, a series of experiments are also carried out to examine the effects of different factors on the heartbeat, such as voltage, the volume of the droplet, the droplet immersion depth, the electrolyte solution concentration, the distance of electrodes, and the type of floating electrode. Finally, the heartbeat state and application boundary of the LM droplet under different conditions are summarized by imitating the human life process. The periodic changes of the LM droplet under an external DC electric field provide a new method to simulate the beating of the heart artificially, and can be applied to the research of organ chip fluid pumping in the future.

Pumping of electrolyte with mobile liquid metal droplets driven by continuous electrowetting: A full-scaled simulation study considering surface-coupled electrocapillary two-phase flow.

With the excellent merits of both solid conductors and rheological fluids, liquid metal (LM) provides new opportunities to serve as flexible building blocks of miniaturized electronic and fluidic devices. The phenomenon of continuous electrowetting (CEW) has been long utilized for actuating LM contents in buffer medium, wherein an externally imposed voltage difference is responsible of manipulating the interfacial tension of deformable LM droplets. CEW effectively lowers the surface tension at the LM/electrolyte interface by driving bipolar counterions to the surface of conducting droplet. Since surface tension coefficient relies sensitively on the local voltage drop across the induced double layer, an electric-analogy Marangoni effect occurs even under a rather weak electric field in the presence of a surface gradient of the interfacial tension. CEW of LM routinely induces unidirectional pumping of electrolyte in the direction of applied electric field, with LM droplet translating oppositely within the device channel. Although this subject has received great attention from the microfluidic society in the past decade, previous reports concerned either the individual delivery of the suspension medium or the transport of LM droplet. Starting from this point, we offer herein a fully coupled physical description of two-phase flow dynamics occurring in CEW. The proposed simulation model successfully incorporates the synergy of the interfacial electrokinetic momentum transfer, surface tension on a curved surface, contact angle at the three-phase contact line as well as the gravity force density. The spatial-temporal motion of the contact interface is traced instantly with a moving mesh approach. By direct numerical simulation, the importance of the direct-current bias, additional alternating-current forcing, droplet size, initial ion adsorption in the process of CEW is addressed. Additionally, it is discovered that increasing the number of LM droplet is more cost-effective than enhancing the volume of a single drop in terms of achieving an improvement of the resulted electrocapillary pump performance, while the translational speed of the discrete droplet carrier does not make an observable change in response to a variation in the drop number. These results prove invaluable in terms of an elaborate design of smart on-chip electrokinetic frameworks embedding flexible LM contents in modern micro-total-analytical systems.

Evaluation of the Electrowetting Effect on the Interfacial Mechanics between Human Corneocytes and Nanoasperities.

A large subset of haptic surfaces employs electroadhesion to modulate both adhesion and friction at a sliding finger interface. The current theory of electroadhesion assumes that the applied electric field pulls the skin into stronger contact, increasing friction by increasing the real contact area, yet it is unknown what role environmental moisture plays in the effect. This paper uses atomic force microscopy (AFM)to determine the effect of humidity on the adhesion and friction between the single nanoscale asperity and individual human finger corneocytes. An analytical model of the total effective load of the AFM tip is developed to explain the humidity-voltage dependence of nanoscale adhesion and friction at contacting asperities. The results show that the electrowetting effect at the interface at high humidity accounts for 35% of the adhesive force but less than 8% of the total friction, implying that the electrowetting effect can be enhanced by optimizing surface topography to promote the formation and rupture of liquid menisci.

Sensitivity Validation of EWOD Devices for Diagnosis of Early Mortality Syndrome (EMS) in Shrimp Using Colorimetric LAMP-XO Technique.

Electrowetting-on-dielectric (EWOD) is a microfluidic technology used for manipulating liquid droplets at microliter to nanoliter scale. EWOD has the ability to facilitate the accurate manipulation of liquid droplets, i.e., transporting, dispensing, splitting, and mixing. In this work, EWOD fabrication with suitable and affordable materials is proposed for creating EWOD lab-on-a-chip platforms. The EWOD platforms are applied for the diagnosis of early mortality syndrome (EMS) in shrimp by utilizing the colorimetric loop-mediated isothermal amplification method with pH-sensitive xylenol orange (LAMP-XO) diagnosis technique. The qualitative sensitivity is observed by comparing the limit of detection (LOD) while performing the LAMP-XO diagnosis test on the proposed lab-on-a-chip EWOD platform, alongside standard LAMP laboratory tests. The comparison results confirm the reliability of EMS diagnosis on the EWOD platform with qualitative sensitivity for detecting the EMS DNA plasmid concentration at 102 copies in a similar manner to the common LAMP diagnosis tests.

Electrowetting-Mediated Transport to Produce Electrochemical Transistor Action in Nanopore Electrode Arrays.

Understanding water behavior in confined volumes is important in applications ranging from water purification to healthcare devices. Especially relevant are wetting and dewetting phenomena which can be switched by external stimuli, such as light and electric fields. Here, these behaviors are exploited for electrochemical processing by voltage-directed ion transport in nanochannels contained within nanopore arrays in which each nanopore presents three electrodes. The top and middle electrodes (TE and ME) are in direct contact with the nanopore volume, but the bottom electrode (BE) is buried beneath a 70 nm silicon nitride (SiNx ) insulating layer. Electrochemical transistor operation is realized when small, defect-mediated channels are opened in the SiNx . These defect channels exhibit voltage-driven wetting that mediates the mass transport of redox species to/from the BE. When BE is held at a potential maintaining the defect channels in the wetted state, setting the potential of ME at either positive or negative overpotential results in strong electrochemical rectification with rectification factors up to 440. By directing the voltage-induced electrowetting of defect channels, these three-electrode nanopore structures can achieve precise gating and ion/molecule separation, and, as such, may be useful for applications such as water purification and drug delivery.

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World.

Electrowetting on dielectric-based digital microfluidic platforms (EWOD-DMF) have a potential to impact point-of-care diagnostics. Conventionally, EWOD-DMF platforms are manufactured in cleanrooms by expert technicians using costly and time consuming micro-nanofabrication processes such as optical lithography, depositions and etching. However, such high-end microfabrication facilities are extremely challenging to establish in resource-poor and low-income countries, due to their high capital investment and operating costs. This makes the fabrication of EWOD-DMF platforms extremely challenging in low-income countries, where such platforms are most needed for many applications such as point-of-care testing applications. To address this challenge, we present a low-cost and simple fabrication procedure for EWOD-DMF electrode arrays, which can be performed anywhere with a commercial office inkjet printer without the need of expensive cleanroom facilities. We demonstrate the utility of our platform to move and mix droplets of different reagents and physiologically conductive buffers, thereby showing its capability to potentially perform a variety of biochemical assays. By combining our low-cost, inkjet-printed EWOD-DMF platform with smartphone imaging technology and a compact control system for droplet manipulation, we also demonstrate a portable and hand-held device which can be programmed to potentially perform a variety of biochemical assays.

Determination of Aqueous Two-Phase System Binodals and Tie-Lines by Electrowetting-on-Dielectric Droplet Manipulation.

Handling the aqueous two-phase systems (ATPSs) formed by liquid-liquid phase separation (LLPS) relies on the accurate construction of binodal curves and tie-lines, which delineate the polymer concentrations required for phase separation and depict the properties of the resulting phases, respectively. Various techniques to determine the binodal curves and tie-lines of ATPSs exist, but most rely on manually pipetting relatively large volumes of fluids in a slow and tedious manner. We describe a method to determine ATPS binodals and tie-lines that overcomes these disadvantages: microscale droplet manipulation by electrowetting-on-dielectric (EWOD). EWOD enables automated handling of droplets in an optically transparent platform that allows for in situ droplet observation. Separated phases are clearly visible, and the volumes of each phase are readily determined. Additionally, in considering the molecular crowding present in living cells, this work examines the role of a macromolecule in prompting LLPS. These results show that EWOD-driven droplet manipulation effectively interrogates the phase dynamics of ATPSs and macromolecular crowding in LLPS.

Liquid Combination with High Refractive Index Contrast and Fast Scanning Speeds for Electrowetting Adaptive Optics.

Electrowetting adaptive optical devices are versatile, with applications ranging from microscopy to remote sensing. The choice of liquids in these devices governs its tuning range, temporal response, and wavelength of operation. We characterized a liquid system, consisting of 1-phenyl-1-cyclohexene and deionized water, using both lens and prism devices. The liquids have a large contact angle tuning range, from 173 to 60°. Measured maximum scanning angle was realized at ±13.7° in a two-electrode prism, with simulation predictions of ±18.2°. The liquid's switching time to reach 90° contact angle from rest, in a 4 mm diameter device, was measured at 100 ms. Steady-state scanning with a two-electrode prism showed linear and consistent scan angles of ±4.8° for a 20 V differential between the two electrodes, whereas beam scanning using the liquid system achieved ±1.74° at 500 Hz for a voltage differential of 80 V.

Digital Microfluidic Cell Culture.

Digital microfluidics (DMF) is a droplet-based liquid-handling technology that has recently become popular for cell culture and analysis. In DMF, picoliter- to microliter-sized droplets are manipulated on a planar surface using electric fields, thus enabling software-reconfigurable operations on individual droplets, such as move, merge, split, and dispense from reservoirs. Using this technique, multistep cell-based processes can be carried out using simple and compact instrumentation, making DMF an attractive platform for eventual integration into routine biology workflows. In this review, we summarize the state-of-the-art in DMF cell culture, and describe design considerations, types of DMF cell culture, and cell-based applications of DMF.

Versatile Miniature Tunable Liquid Lenses Using Transparent Graphene Electrodes.

This paper presents, for the first time, versatile and low-cost miniature liquid lenses with graphene as electrodes. Tunable focal length is achieved by changing the droplet curvature using electrowetting on dielectric (EWOD). Ionic liquid and KCl solution are utilized as lens liquid on the top of a flexible Teflon-coated PDMS/parylene membrane. Transparent and flexible, graphene allows transmission of visible light as well as large deformation of the polymer membrane to achieve requirements for different lens designs and to increase the field of view without damaging of electrodes. The tunable range for the focal length is between 3 and 7 mm for a droplet with a volume of 3 µL. The visualization of bone marrow dendritic cells is demonstrated by the liquid lens system with a high resolution (456 lp/mm).

Two-phase microfluidic flow modeling in an electrowetting display microwell.

Digital microfluidics provides precise control of a single microdroplet, producing more opportunities for bio-molecule studies, chemical reaction and optofluidics applications. By manipulating the surface of droplets, light can be focused, scattered, or reflected toward different positions. We build a model of electro-responsive optical microfluidic system, operated based on the electrowetting mechanism, which can split or push droplets moving within a microwell. The initial close state and operated open state in a single microwell displays the color of a dye oil droplet and the substrate, respectively, represented as the dark and bright pixel in the display board. Our results indicate that the microdroplets interface could be successfully deformed and moved towards different directions within a short period of time.

Miniaturized fiber-coupled confocal fluorescence microscope with an electrowetting variable focus lens using no moving parts.

We report a miniature, lightweight fiber-coupled confocal fluorescence microscope that incorporates an electrowetting variable focus lens to provide axial scanning for full three-dimensional (3D) imaging. Lateral scanning is accomplished by coupling our device to a laser-scanning confocal microscope through a coherent imaging fiber-bundle. The optical components of the device are combined in a custom 3D-printed adapter with an assembled weight of <2 g that can be mounted onto the head of a mouse. Confocal sectioning provides an axial resolution of ∼12 µm and an axial scan range of ∼80 µm. The lateral field-of-view is 300 µm, and the lateral resolution is 1.8 µm. We determined these parameters by imaging fixed sections of mouse neuronal tissue labeled with green fluorescent protein (GFP) and fluorescent bead samples in agarose gel. To demonstrate viability for imaging intact tissue, we resolved multiple optical sections of ex vivo mouse olfactory nerve fibers expressing yellow fluorescent protein (YFP).

Direct in situ measurement of specific capacitance, monolayer tension, and bilayer tension in a droplet interface bilayer.

Thickness and tension are important physical parameters of model cell membranes. However, traditional methods to measure these quantities require multiple experiments using separate equipment. This work introduces a new multi-step procedure for directly accessing in situ multiple physical properties of droplet interface bilayers (DIB), including specific capacitance (related to thickness), lipid monolayer tension in the Plateau-Gibbs border, and bilayer tension. The procedure employs a combination of mechanical manipulation of bilayer area followed by electrowetting of the capacitive interface to examine the sensitivities of bilayer capacitance to area and contact angle to voltage, respectively. These data allow for determining the specific capacitance of the membrane and surface tension of the lipid monolayer, which are then used to compute bilayer thickness and tension, respectively. The use of DIBs affords accurate optical imaging of the connected droplets in addition to electrical measurements of bilayer capacitance, and it allows for reversibly varying bilayer area. After validating the accuracy of the technique with diphytanoyl phosphatidylcholine (DPhPC) DIBs in hexadecane, the method is applied herein to quantify separately the effects on membrane thickness and tension caused by varying the solvent in which the DIB is formed and introducing cholesterol into the bilayer. Because the technique relies only on capacitance measurements and optical images to determine both thickness and tension, this approach is specifically well-suited for studying the effects of peptides, biomolecules, natural and synthetic nanoparticles, and other species that accumulate within membranes without altering bilayer conductance.

A palm-size µNMR relaxometer using a digital microfluidic device and a semiconductor transceiver for chemical/biological diagnosis.

Herein, we describe a micro-nuclear magnetic resonance (µNMR) relaxometer miniaturized to palm-size and electronically automated for multi-step and multi-sample chemical/biological diagnosis. The co-integration of microfluidic and microelectronic technologies enables an association between the droplet managements and µNMR assays inside a portable sub-Tesla magnet (1.2 kg, 0.46 Tesla). Targets in unprocessed biological samples, captured by specific probe-decorated magnetic nanoparticles (NPs), can be sequentially quantified by their spin-spin relaxation time (T2) via multiplexed µNMR screening. Distinct droplet samples are operated by a digital microfluidic device that electronically manages the electrowetting-on-dielectric effects over an electrode array. Each electrode (3.5 × 3.5 mm(2)) is scanned with capacitive sensing to locate the distinct droplet samples in real time. A cross-domain-optimized butterfly-coil-input semiconductor transceiver transduces between magnetic and electrical signals to/from a sub-10 µL droplet sample for high-sensitivity µNMR screening. A temperature logger senses the ambient temperature (0 to 40 °C) and a backend processor calibrates the working frequency for the transmitter to precisely excite the protons. In our experiments, the µNMR relaxometer quantifies avidin using biotinylated Iron NPs (Φ: 30 nm, [Fe]: 0.5 mM) with a sensitivity of 0.2 µM. Auto-handling and identification of two targets (avidin and water) are demonstrated and completed within 2.2 min. This µNMR relaxometer holds promise for combinatorial chemical/biological diagnostic protocols using closed-loop electronic automation.

Micro-chemical synthesis of molecular probes on an electronic microfluidic device.

We have developed an all-electronic digital microfluidic device for microscale chemical synthesis in organic solvents, operated by electrowetting-on-dielectric (EWOD). As an example of the principles, we demonstrate the multistep synthesis of [(18)F]FDG, the most common radiotracer for positron emission tomography (PET), with high and reliable radio-fluorination efficiency of [(18)F]FTAG (88 ± 7%, n = 11) and quantitative hydrolysis to [(18)F]FDG (> 95%, n = 11). We furthermore show that batches of purified [(18)F]FDG can successfully be used for PET imaging in mice and that they pass typical quality control requirements for human use (including radiochemical purity, residual solvents, Kryptofix, chemical purity, and pH). We report statistical repeatability of the radiosynthesis rather than best-case results, demonstrating the robustness of the EWOD microfluidic platform. Exhibiting high compatibility with organic solvents and the ability to carry out sophisticated actuation and sensing of reaction droplets, EWOD is a unique platform for performing diverse microscale chemical syntheses in small volumes, including multistep processes with intermediate solvent-exchange steps.

Transitional Electrodes in Electrowetting-Based Droplet Dispensing.

Digital microfluidic systems based on electrowetting-on-dielectric technology, particularly valuable in producing and manipulating microdroplets steadily and consistently, have experienced notable advancements in recent years. In this paper, experimental characterizations reveal that simply adding one transitional electrode between the reservoir and the splitting electrode improves the volumetric consistency and reproducibility for droplet dispensing. The volumetric coefficient variation of the consecutively dispensed droplets from a non-refilling reservoir decreases by 1% after the addition of one transitional electrode, with no extra external apparatus. This work provides a straightforward yet effective approach to the improvement of digital microfluidic systems and micro total analysis systems.