Adaptive cooling strategy via human hair: High optothermal conversion efficiency of solar radiation into thermal dissipation.

Natural species have developed complex nanostructures in a hierarchical pattern to control the absorption, reflection, or transmission of desired solar and infrared wavelengths. This bio-inspired structure is a promising method to manipulating solar energy and thermal management. In particular, human hair is used in this article to highlight the optothermal properties of bio-inspired structures. This study investigated how melanin, an effective solar absorber, and the structural morphology of aligned domains of keratin polymer chains, leading to a significant increase in solar path length, which effectively scatter and absorb solar radiation across the hair structure, as well as enhance thermal ramifications from solar absorption by fitting its radiative wavelength to atmospheric transmittance for high-yield radiative cooling with realistic human body thermal emission.

Human scalp hair as a thermoregulatory adaptation.

Humans are unique among mammals in having a functionally naked body with a hair-covered scalp. Scalp hair is exceptionally variable across populations within Homo sapiens. Neither the function of human scalp hair nor the consequences of variation in its morphology have been studied within an evolutionary framework. A thermoregulatory role for human scalp hair has been previously suggested. Here, we present experimental evidence on the potential evolutionary function of human scalp hair and variation in its morphology. Using a thermal manikin and human hair wigs at different wind speeds in a temperature and humidity-controlled environment, with and without simulated solar radiation, we collected data on the convective, radiative, and evaporative heat fluxes to and from the scalp in relation to properties of a range of hair morphologies, as well as a naked scalp. We find evidence for a significant reduction in solar radiation influx to the scalp in the presence of hair. Maximal evaporative heat loss potential from the scalp is reduced by the presence of hair, but the amount of sweat required on the scalp to balance the incoming solar heat (i.e., zero heat gain) is reduced in the presence of hair. Particularly, we find that hair that is more tightly curled offers increased protection against heat gain from solar radiation.

Predicted wind and solar energy expansion has minimal overlap with multiple conservation priorities across global regions.

Protected areas and renewable energy generation are critical tools to combat biodiversity loss and climate change, respectively. Over the coming decades, expansion of the protected area network to meet conservation objectives will be occurring alongside rapid deployment of renewable energy infrastructure to meet climate targets, driving potential conflict for a finite land resource. Renewable energy infrastructure can have negative effects on wildlife, and co-occurrence may mean emissions targets are met at the expense of conservation objectives. Here, we assess current and projected overlaps of wind and solar photovoltaic installations and important conservation areas across nine global regions using spatially explicit wind and solar data and methods for predicting future renewable expansion. We show similar levels of co-occurrence as previous studies but demonstrate that once area is accounted for, previous concerns about overlaps in the Northern Hemisphere may be largely unfounded, although they are high in some biodiverse countries (e.g., Brazil). Future projections of overlap between the two land uses presented here are generally dependent on priority threshold and region and suggest the risk of future conflict can be low. We use the best available data on protected area degradation to corroborate this level of risk. Together, our findings indicate that while conflicts between renewables and protected areas inevitably do occur, renewables represent an important option for decarbonization of the energy sector that would not significantly affect area-based conservation targets if deployed with appropriate policy and regulatory controls.

Scenarios for modeling solar radiation modification.

Making informed future decisions about solar radiation modification (SRM; also known as solar geoengineering)-approaches such as stratospheric aerosol injection (SAI) that would cool the climate by reflecting sunlight-requires projections of the climate response and associated human and ecosystem impacts. These projections, in turn, will rely on simulations with global climate models. As with climate-change projections, these simulations need to adequately span a range of possible futures, describing different choices, such as start date and temperature target, as well as risks, such as termination or interruptions. SRM modeling simulations to date typically consider only a single scenario, often with some unrealistic or arbitrarily chosen elements (such as starting deployment in 2020), and have often been chosen based on scientific rather than policy-relevant considerations (e.g., choosing quite substantial cooling specifically to achieve a bigger response). This limits the ability to compare risks both between SRM and non-SRM scenarios and between different SRM scenarios. To address this gap, we begin by outlining some general considerations on scenario design for SRM. We then describe a specific set of scenarios to capture a range of possible policy choices and uncertainties and present corresponding SAI simulations intended for broad community use.

Conjugated Molecules Based Multi-Component Artificial Photosynthesis System for Producing Multi-Objective Products.

The development of artificial photosynthesis systems that mimics natural photosynthesis can help address the issue of energy scarcity by efficiently utilizing solar energy. Here, it presents liposomes-based artificial photosynthetic nanocapsules (PSNC) integrating photocatalytic, chemical catalytic, and biocatalytic systems through one-pot method. The PSNC contains 5,10,15,20-tetra(4-pyridyl) cobalt-porphyrin, tridipyridyl-ruthenium nitrate, oligo-pphenyl-ethylene-rhodium complex, and creatine kinase, efficiently generating oxygen, nicotinamide adenine dinucleotide (NADH), and adenosine triphosphate with remarkable enhancements of 231%, 30%, and 86%, compared with that of molecules mixing in aqueous solution. Additionally, the versatile PSNC enables simulation of light-independent reactions, achieving a controllable output of various target products. The regenerated NADH within PSNC further facilitates alcohol dehydrogenase, yielding methanol with a notable efficiency improvement of 37%. This work introduces a promising platform for sustainable solar energy conversion and the simultaneous synthesis of multiple valuable products in an ingenious and straightforward way.

Environmental plastics in the context of UV radiation, climate change, and the Montreal Protocol.

There are close links between solar UV radiation, climate change, and plastic pollution. UV-driven weathering is a key process leading to the degradation of plastics in the environment but also the formation of potentially harmful plastic fragments such as micro- and nanoplastic particles. Estimates of the environmental persistence of plastic pollution, and the formation of fragments, will need to take in account plastic dispersal around the globe, as well as projected UV radiation levels and climate change factors.

Harnessing the sun's power: Hybrid photosynthesis might become a key technology to address the energy crisis and food security challenges: Hybrid photosynthesis might become a key technology to address the energy crisis and food security challenges.

Research on artificial photosynthesis has made considerable progress recently by combining natural and man-made systems for higher efficiency of solar energy conversion.

Exploratory study on the body distribution of skin color, pigmentation and, degree of tan in Central European Caucasian Women.

It is well known that skin color varies by body site and with season. However, little quantitative data on the topography of skin color and pigmentation are available. Therefore, exploratory cutaneous colorimetric measurements in 20 in central European Caucasian women aged 20 to 60 years have been made at 18 body sites. Tri-stimulus L*a*b*-values, hue, and chroma are considered to describe skin color. Based on the "Individual Typology Angle", the "Degree of Tan" was introduced to quantify the difference between constitutive and facultative pigmentation. Measurements were done in late winter and early summer to estimate potential changes by solar ultraviolet radiation. These measurements made evident that skin color obviously differs across the body in late winter. Even nearby body sites can be recognized as differently colored. A remaining degree of tan was found at permanent and intermittent exposed body sites. The remaining tan was not most pronounced at the permanently exposed sites but on the intermediate ones like the shoulder. In early summer, the degree of tan has most developed at the hands, arms, and instep, followed by the face. This study showed that besides basic differences between body sites in winter, accumulation, and degradation of tan also vary between body sites.

Development of dye-sensitized solar cells using pigment extracts produced by Talaromyces atroroseus GH2.

The identification of more efficient, clean, secure, and competitive energy supply is necessary to align with the needs of sustainable devices. For this reason, a study for developing innovative dye-sensitized solar cells (DSSCs) based on microbial pigments is reported starting from Talaromyces atroroseus GH2. The fungus was cultivated by fermentation and the extracellular pigment extract was characterized by HPLC-DAD-ESI-MS analyses. The most abundant compound among the 22 azaphilone-type pigments identified was represented by PP-O. The device's behavior was investigated in relation to electrolyte and pH for verifying the stability on time and the photovoltaic performance. Devices obtained were characterized by UV-vis measurements to verify the absorbance intensity and transmittance percentage. Moreover, photovoltaic parameters through photo-electrochemical measurements (I-V curves) and impedance characteristics by Electrochemical Impedance Spectroscopy (EIS) were determined. The best microbial device showed a short-circuit current density (Jsc) of 0.69 mA/cm2, an open-circuit photo-voltage (Voc) of 0.27 V and a Fill Factor (FF) of 0.60. Furthermore, the power conversion efficiency (PCE) of the device was 0.11%. Thus, the present study demonstrated the potential of microbial origin pigments for developing DSSCs.

Electrogenic performance and carbon sequestration potential of biophotovoltaics.

Biophotovoltaics (BPV) is a clean and sustainable solar energy generation technology that operates by utilizing photosynthetic autotrophic microorganisms to capture light energy and generate electricity. However, a major challenge faced by BPV systems is the relatively low electron transfer efficiency from the photosystem to the extracellular electrode, which limits its electrical output. Additionally, the transfer mechanisms of photosynthetic microorganism metabolites in the entire system are still not fully clear. In response to this, this article briefly introduces the basic BPV principles, reviews its development history, and summarizes measures to optimize its electrogenic efficiency. Furthermore, recent studies have found that constructing photosynthetic-electrogenic microbial consortia can achieve high power density and stability in BPV systems. Therefore, the article discusses the potential application of constructing photosynthetic-electrogenic microbial aggregates in BPV systems. Since photosynthetic-electrogenic microbial communities can also exist in natural ecosystems, their potential contribution to the carbon cycle is worth further attention.

Emerging Chalcogenide Thin Films for Solar Energy Harvesting Devices.

Chalcogenide semiconductors offer excellent optoelectronic properties for their use in solar cells, exemplified by the commercialization of Cu(In,Ga)Se2- and CdTe-based photovoltaic technologies. Recently, several other chalcogenides have emerged as promising photoabsorbers for energy harvesting through the conversion of solar energy to electricity and fuels. The goal of this review is to summarize the development of emerging binary (Sb2X3, GeX, SnX), ternary (Cu2SnX3, Cu2GeX3, CuSbX2, AgBiX2), and quaternary (Cu2ZnSnX4, Ag2ZnSnX4, Cu2CdSnX4, Cu2ZnGeX4, Cu2BaSnX4) chalcogenides (X denotes S/Se), focusing especially on the comparative analysis of their optoelectronic performance metrics, electronic band structure, and point defect characteristics. The performance limiting factors of these photoabsorbers are discussed, together with suggestions for further improvement. Several relatively unexplored classes of chalcogenide compounds (such as chalcogenide perovskites, bichalcogenides, etc.) are highlighted, based on promising early reports on their optoelectronic properties. Finally, pathways for practical applications of emerging chalcogenides in solar energy harvesting are discussed against the backdrop of a market dominated by Si-based solar cells.

Configurable Organic Charge Carriers toward Stable Perovskite Photovoltaics.

Due to their solution processability and unique photoelectric characteristics, perovskite solar cells (PSCs) have shown considerable promise in the area of renewable energy. Although their power conversion efficiency (PCE) has risen from 3.8% to 25.7% in only a few years, their short lifetime and high material prices continue to be key roadblocks to commercial viability. Charge transporting materials (CTMs), such as hole/electron transporting materials, are critical components in PSCs because they not only govern hole or electron extraction and transporting from the perovskite layer to the electrodes but also protect the perovskite from direct contact with the ambient environment. CTMs are split into two types: inorganic CTMs (ICTMs) and organic CTMs (OCTMs). Because of their inexpensive prices, well-adjusted energy levels, and low temperature solution-processed features, OCTMs have been more frequently explored and employed than ICTMs. Various forms of OCTMs with more straightforward synthetic pathways and better performance have been thoroughly researched. Recent achievements in the development of OCTMs will be discussed and evaluated on a molecular level in this study, which will include a systematic categorization of OCTMs based on molecular functionalization techniques. In order to achieve highly efficient and stable PSCs, we will present insights on the structure-property relationship in the design of OCTMs as well as device stability. We hope that this analysis will serve as a comprehensive reference to molecular design guidelines for various types of OCTMs, spurring greater research toward designing highly efficient and OCTMs for stable PSCs.

Non-Noble Plasmonic Metal-Based Photocatalysts.

Solar-to-chemical energy conversion via heterogeneous photocatalysis is one of the sustainable approaches to tackle the growing environmental and energy challenges. Among various promising photocatalytic materials, plasmonic-driven photocatalysts feature prominent solar-driven surface plasmon resonance (SPR). Non-noble plasmonic metals (NNPMs)-based photocatalysts have been identified as a unique alternative to noble metal-based ones due to their advantages like earth-abundance, cost-effectiveness, and large-scale application capability. This review comprehensively summarizes the most recent advances in the synthesis, characterization, and properties of NNPMs-based photocatalysts. After introducing the fundamental principles of SPR, the attributes and functionalities of NNPMs in governing surface/interfacial photocatalytic processes are presented. Next, the utilization of NNPMs-based photocatalytic materials for the removal of pollutants, water splitting, CO2 reduction, and organic transformations is discussed. The review concludes with current challenges and perspectives in advancing the NNPMs-based photocatalysts, which are timely and important to plasmon-based photocatalysis, a truly interdisciplinary field across materials science, chemistry, and physics.

Molecular-Modified Photocathodes for Applications in Artificial Photosynthesis and Solar-to-Fuel Technologies.

Nature offers inspiration for developing technologies that integrate the capture, conversion, and storage of solar energy. In this review article, we highlight principles of natural photosynthesis and artificial photosynthesis, drawing comparisons between solar energy transduction in biology and emerging solar-to-fuel technologies. Key features of the biological approach include use of earth-abundant elements and molecular interfaces for driving photoinduced charge separation reactions that power chemical transformations at global scales. For the artificial systems described in this review, emphasis is placed on advancements involving hybrid photocathodes that power fuel-forming reactions using molecular catalysts interfaced with visible-light-absorbing semiconductors.

Red Phosphorus: An Up-and-Coming Photocatalyst on the Horizon for Sustainable Energy Development and Environmental Remediation.

Photocatalysis is a perennial solution that promises to resolve deep-rooted challenges related to environmental pollution and energy deficit through harvesting the inexhaustible and renewable solar energy. To date, a cornucopia of photocatalytic materials has been investigated with the research wave presently steered by the development of novel, affordable, and effective metal-free semiconductors with fascinating physicochemical and semiconducting characteristics. Coincidentally, the recently emerged red phosphorus (RP) semiconductor finds itself fitting perfectly into this category ascribed to its earth abundant, low-cost, and metal-free nature. More notably, the renowned red allotrope of the phosphorus family is spectacularly bestowed with strengthened optical absorption features, propitious electronic band configuration, and ease of functionalization and modification as well as high stability. Comprehensively detailing RP's roles and implications in photocatalysis, this review article will first include information on different RP allotropes and their chemical structures, followed by the meticulous scrutiny of their physicochemical and semiconducting properties such as electronic band structure, optical absorption features, and charge carrier dynamics. Besides that, state-of-the-art synthesis strategies for developing various RP allotropes and RP-based photocatalytic systems will also be outlined. In addition, modification or functionalization of RP with other semiconductors for promoting effective photocatalytic applications will be discussed to assess its versatility and feasibility as a high-performing photocatalytic system. Lastly, the challenges facing RP photocatalysts and future research directions will be included to propel the feasible development of RP-based systems with considerably augmented photocatalytic efficiency. This review article aspires to facilitate the rational development of multifunctional RP-based photocatalytic systems by widening the cognizance of rational engineering as well as to fine-tune the electronic, optical, and charge carrier properties of RP.

Integration of silicon nanostructures for health and energy applications using MACE: a cost-effective process.

Silicon in its nanoscale range offers a versatile scope in biomedical, photovoltaic, and solar cell applications. Due to its compatibility in integration with complex molecules owing to changes in charge density of as-fabricated Silicon Nanostructures (SiNSs) to realize label-free and real-time detection of certain biological and chemical species with certain biomolecules, it can be exploited as an indicator for ultra-sensitive and cost-effective biosensing applications in disease diagnosis. The morphological changes of SiNSs modified receptors (PNA, DNA, etc) have huge future scope in optimized sensitivity (due to conductance variations of SiNSs) of target biomolecules in health care applications. Further, due to the unique optical and electrical properties of SiNSs realized using the chemical etching technique, they can be used as an indicator for photovoltaic and solar cell applications. In this work, emphasis is given on different critical parameters that control the fabrication morphologies of SiNSs using metal-assisted chemical etching technique (MACE) and its corresponding fabrication mechanisms focusing on numerous applications in energy storage and health care domains. The evolution of MACE as a low-cost, easy process control, reproducibility, and convenient fabrication mechanism makes it a highly reliable-process friendly technique employed in photovoltaic, energy storage, and biomedical fields. Analysis of the experimental fabrication to obtain high aspect ratio SiNSs was carried out using iMAGEJ software to understand the role of surface-to-volume ratio in effective bacterial interfacing. Also, the role of silicon nanomaterials has been discussed as effective anti-bacterial surfaces due to the presence of silver investigated in the post-fabrication energy dispersive x-ray spectroscopy analysis using MACE.

Solar-Powered Direct Air Capture: Techno-Economic and Environmental Assessment.

Direct air capture (DAC) of CO2 has gained attention as a sustainable carbon source. One of the most promising technologies currently available is liquid solvent DAC (L-DAC), but the significant fraction of fossil CO2 in the output stream hinders its utilization in carbon-neutral fuels and chemicals. Fossil CO2 is generated and captured during the combustion of fuels to calcine carbonates, which is difficult to decarbonize due to the high temperatures required. Solar thermal energy can provide green high-temperature heat, but it flourishes in arid regions where environmental conditions are typically unfavorable for L-DAC. This study proposes a solar-powered L-DAC approach and develops a model to assess the influence of the location and plant capacity on capture costs. The performed life cycle assessment enables the comparison of technologies based on net CO2 removal, demonstrating that solar-powered L-DAC is not only more environmentally friendly but also more cost-effective than conventional L-DAC.

Mechanistic and Kinetic Consideration of the Photochemically Generated Oxidative Organic Radicals in Dissolved Black Carbon Solutions under Simulated Solar Irradiation.

The photochemically generated oxidative organic radicals (POORs) in dissolved black carbon (DBC) was investigated and compared with that in dissolved organic matter (DOM). POORs generated in DBC solutions exhibited higher one-electron reduction potential values (1.38-1.56 V) than those in DOM solutions (1.22-1.38 V). We found that the photogeneration of POORs from DBC is enhanced with dissolved oxygen (DO) increasing, while the inhibition of POORs is observed in reference to DOM solution. The behavior of the one-electron reducing species (DBC•-/DOM•-) was employed to explain this phenomenon. The experimental results revealed that the DO concentration had a greater effect on DBC•- than on DOM•-. Low DO levels led to a substantial increase in the steady-state concentration of DBC•-, which quenched the POORs via back-electron reactions. Moreover, the contribution of POORs to the degradation of 19 emerging organic contaminants (EOCs) in sunlight-exposed DBC and DOM solutions was estimated. The findings indicate that POORs play an important role in the photodegradation of EOCs previously known to react with triplets, especially in DBC solutions. Compared to DOM solutions, POOR exhibits a lower but considerable contribution to EOC attenuation. This study enhances the understanding of pollutant fate in aquatic environments by highlighting the role of DBC in photochemical pollutant degradation and providing insights into pollutant transformation mechanisms involving POORs.