Imprinted ß-ketoenamine-linked covalent organic frameworks as dispersive sorbents for the fluorometric determination of timolol.

Timolol accompanied the formation of fluorescent ß-ketoenamine-linked covalent organic frameworks (COFs) via the Sc(Tof)3-catalyzed condensation of derivated carbaldehyde and hydrazide in a 1,4-dioxane/mesitylene porogen to construct timolol-imprinted COFs (TICOFs). With high imprinting factors, the synthesis-optimized TICOFs were characterized by fluorescence, UV-Vis spectrometry, X-ray diffraction, N2 adsorption/desorption analyses, scanning electron microscopy, and FTIR spectrometry. The TICOF fluorescence measured at 390 nm/510 nm is dynamically quenched by timolol and was thus utilized to quantify timolol in a linear range of 25-500 nM with a LOD of 8 nM. The TICOF recovered 99.4% of 0.5% timolol maleate in a commercial eye drop (RSD = 1.1%, n = 5). In addition, TICOF was used as a dispersive sorbent to recover 95% of 2.0 nM timolol from 20 mg of TICOF in 25 mL phosphate buffer. Dilution factors of 25 and 75 were the maximum tolerated proportions of the urine and serum matrix spiked with 2.0 nM timolol to reach recoveries of 92.4% and 90.3%, respectively.

Molecular interaction of some cardiovascular drugs with human serum albumin at physiological-like conditions: A new approach.

In the present study, the interaction of human serum albumin (HSA) with some cardiovascular drugs (CARs) under physiological conditions was investigated via the fluorescence spectroscopic and Fourier transform infrared spectroscopy. The CAR included Captopril, Timolol, Propranolol, Atenolol, and Amiodarone. Cardiovascular drugs can effectively quench the endogenous fluorescence of HSA by static quenching mechanism. The fluorescence quenching of HSA is mainly caused by complex formation of HSA with CAR. The binding reaction of CAR with HSA can be concluded that hydrophobic and electrostatic interactions are the main binding forces in the CAR-HSA system. The results showed that CAR strongly quenched the intrinsic fluorescence of HSA through a static quenching procedure, and nonradiation energy transfer happened within molecules. Fourier transform infrared spectroscopy absorption studies showed that the secondary structure was changed according to the interaction of HSA and CAR. The binding reaction of CAR with HSA can be concluded that hydrophobic and electrostatic interactions are the main binding forces in the CAR-HSA system. The results obtained herein will be of biological significance in pharmacology and clinical medicines.

Development of Timolol-Loaded Galactosylated Chitosan Nanoparticles and Evaluation of Their Potential for Ocular Drug Delivery.

This study was conducted to develop timolol maleate (TM)-loaded galactosylated chitosan (GC) nanoparticles (NPs) (TM-GC-NPs) followed by optimization via a four-level and three-factor Box-Behnken statistical experimental design. The optimized nanoparticles showed a particle size of 213.3 ± 6.83 nm with entrapment efficiency of 38.58 ± 1.31% and drug loading of 17.72 ± 0.28%. The NPs were characterized with respect to zeta potential, pH, surface morphology, and differential scanning calorimetry (DSC). The determination of the oil-water partition coefficient demonstrated that the TM-GC-NPs had a high liposolubility at pH 6 as compared to timolol-loaded chitosan nanoparticles (TM-CS-NPs) and commercial TM eye drops. The in vitro release study indicated that TM-GC-NPs had a sustained release effect compared with the commercial TM eye drops. Ocular tolerance was studied by the hen's egg chorioallantoic membrane (HET-CAM) assay and the formulation was non-irritant and could be used for ophthalmic drug delivery. The in vitro transcorneal permeation study and confocal microscopy showed enhanced penetration, and retention in the cornea was achieved with TM-GC-NPs compared with the TM-CS-NPs and TM eye drops. Preocular retention study indicated that the retention of TM-GC-NPs was significantly longer than that of TM eye drops. The in vivo pharmacodynamic study suggested TM-GC-NPs had a better intraocular pressure (IOP) lowering efficacy and a prolonged working time compared to commercial TM eye drops (P ≤ 0.05). The optimized TM-GC-NPs could be prepared successfully promising their use as an ocular delivery system.

Deformability properties of timolol-loaded transfersomes based on the extrusion mechanism. Statistical optimization of the process.

The purpose of this work was to analyze the deformability properties of different timolol maleate (TM)-loaded transfersomes by extrusion. This was performed because elastic liposomes may contribute to the elevation of amount and rate of drug permeation through the corneal membrane. This paper describes the optimization of a transfersome formulation by use of Taguchi orthogonal experimental design and two different statistical analysis approaches were utilized. The amount of cholesterol (F1), the amount of edge-activator (F2), the distribution of the drug into the vesicle (F3), the addition of stearylamine (F4) and the type of edge-activator (F5) were selected as causal factors. The deformability index, the phosphorous recovery, the vesicle size, the polydispersity index, the zeta potential and percentage of drug entrapped were fixed as the dependent variables and these responses were evaluated for each formulation. Two different statistical analysis approaches were applied. The better statistical approach was determined by comparing their prediction errors, where regression analysis provided better optimized responses than marginal means. From the study, an optimized formulation of TM-loaded transfersomes was prepared and obtained for the proposed ophthalmic delivery for the treatment of open angle glaucoma. It was found that the lipid to surfactant ratio and type of surfactant are the main key factors for determining the flexibility of the bilayer of transfersomes. From in vitro permeation studies, we can conclude that TM-loaded transfersomes may enhance the corneal transmittance and improve the bioavailability of conventional TM delivery.

Physicochemical stability of a new topical timolol 0.5% gel formulation for the treatment of infant hemangioma.

Infant hemangioma (IH) is the most common tumor in infants, which affects 5-10% of white children. It is a tumor of vascular origin that appears in the first months of life. The indication for the treatment of the IH is not approved in the datasheet of the product, however it has been used in the infant hemangioma by topical administration as an alternative to oral propranolol, avoiding the main problems of the oral route (bradycardia and hypotension). The objective of this work is to study the physical and chemical (HPLC stability indicating method) stability of a 0.5% timolol gel for topical application during 60 days (considering the stability limit as 90% of initial concentration of timolol maleate). The gel was prepared with a polyacrylic acid derivative and the physical stability of the system was studied by visual control, rheological and mechanical characterization. The studied formulation guarantees the correct dose administering and stability after 60 days stored at 25 ± 2 °C and light protected (tube of aluminum). We have developed an easy topical gel for the treatment of infant hemangioma with physical and chemical stability higher than those provided by the majority of hospitals.

Colorimetric Concurrent Determination of Ultra-Trace Amounts of Pilocarpine and Timolol as Anti-Glaucoma Drugs in Binary Mixtures Using a Multivariate Calibration Approach Based on the Aggregation of Gold Nanoparticles.

BACKGROUND: To study the ultra-trace simultaneous determination of drugs, the colorimetric method in combination with chemometrics can be used. OBJECTIVE: In this study, a simple, rapid, and sensitive UV-Vis spectrophotometric method using gold nanoparticles (AuNPs) was introduced for the simultaneous determination of ultra-trace amounts of pilocarpine (PIL) and timolol (TIM) in binary mixtures and biological samples. METHODS: AuNPs interacted with components and the aggregation mode of NPs occurred, and, finally, the color change of the solution (red to gray) was observed with the naked eye without the most modern and expensive instruments. The characterization of AuNPs was evaluated by transmission electron microscopy (TEM) and dynamic light scattering (DLS). RESULTS: The validation of the colorimetric way was studied in the concentration range of 100-800 and 100-600 µg/L with good linearity equal to 0.9772 and 0.9891 for PIL and TIM, respectively. The limit of detection (LOD) was found to be 165.00 and 92.40 µg/L, where the limit of quantitation (LOQ) was 500.00 and 280.00 µg/L for PIL and TIM, respectively. The effect of some factors such as interaction time, the concentration of components, and the volume of buffer on absorbance was investigated. Partial least squares (PLS) as an efficient multivariate calibration method was combined with colorimetry for the simultaneous determination of PIL and TIM in binary mixtures. The optimum number of latent variables was selected by k-fold cross-validation based on minimum mean square error prediction (MSEP), and the number of components equal to 1 with MSEP of 1.085 and 0.763 was considered for PIL and TIM, respectively. The mean recovery was obtained at 100.20 and 101.55% for PIL and TIM, respectively. CONCLUSIONS: The colorimetric method can be introduced as a proper option for the simultaneous determination of components in pharmaceutical formulations and other samples. HIGHLIGHTS: A colorimetric method using AuNPs was proposed. The PLS method was coupled with a colorimetric method for the ultra-trace simultaneous estimation of PIL and TIM in binary mixtures. Ultra-trace amounts of PIL and TIM were also determined in biological samples. The proposed method is simple, fast, and less expensive than chromatography methods.

Quality by design steered approach for co-encapsulation of timolol maleate and dorzolamide hydrochloride in injectable liposomes.

Glaucoma is caused by high intraocular pressure, which can causes blindness. Combinations of timolol and dorzolamide are used for its treatment with a requirement of multiple dosing with dosing being twice or four times a day. Conventional eye drops have poor pre-corneal retention and is thus less available for action. This study utilizes principles of Quality by Design for formulation of injectable liposomes coloaded with timolol maleate and dorzolamide HCl, which overcomes limitations of conventional eye drops. For implementation of Quality by Design principles a systematic approach involving defining Quality Target Product Profile, identification of Critical Quality Attributes, mapping Critical Quality Attributes to Critical Process Parameters and Critical Material Attributes, Failure Mode and Effect Analysis based risk assessment, Taguchi screening, and 32 full factorial Design of Experiments design were utilized. A robust model for formulation of coloaded liposomes was successfully developed. Design of Experiments approach allowed to obtain optimized batch having particle size of 116.1 nm, encapsulation efficiency of dorzolamide HCl of 72.12 % and encapsulation efficiency of timolol maleate of 71.94 %. In-vitro drug release showed a sustained release for 4 days. The prepared formulation was in the desired osmolarity range. Biosafety was proved using histopathological characterization. In-vivo studies for assessing the Intra Ocular Pressure reduction showed that there was no significant difference in Intra Ocular Pressure reduction between prepared liposomes and marketed formulation but were superior than marketed formulation because of less fluctuations in Intra Ocular Pressure. Prepared coloaded injectable liposomes lays the foundation for further research in the area and can be translated from to bench side for commercial clinical use.

In situ forming hydrogels based on modified gellan gum/chitosan for ocular drug delivery of timolol maleate.

In situ forming hydrogels are suitable candidates for increasing drug residence time in ocular drug delivery. In this study, gellan gum (GG) was oxidized to form aldehyde groups and in situ gelling hydrogels were synthesized based on a Schiff-base reaction between oxidized GG (OGG) and chitosan (CS) in the presence of ß-glycerophosphate. The effect of OGG and CS concentration on the physical and chemical properties of the resulting hydrogels was investigated. The FT-IR spectroscopy confirmed the chemical modification of OGG as well as the functional groups of the prepared hydrogels. The scanning electron microscope (SEM) revealed the highly porous structure of hydrogels. The obtained hydrogels indicated a high swelling degree and degradability. Also, the rheological studies demonstrated self-healing behavior, shear thinning, thixotropy, and mucoadhesion properties for the developed hydrogels. The results of in vitro and ex vivo studies showed that the timolol-loaded hydrogel with a higher amount of OGG has a higher release rate. Moreover, the MTT cytotoxicity test on bone marrow mesenchymal stem cells (BMSCs) confirmed that developed hydrogels are not toxic. The obtained results revealed that the developed hydrogels can be a desirable choice for the ocular drug delivery of timolol in the treatment of glaucoma.

Chitosan nanoparticles laden contact lenses for enzyme-triggered controlled delivery of timolol maleate: A promising strategy for managing glaucoma.

To improve drug bioavailability, eye drops can be replaced by drug-eluting contact lenses. However, issues of drug leaching from lenses during manufacture and storage, and sterilization, currently limit their commercial application. To address the issues, stimuli-(lysozyme)-sensitive chitosan nanoparticles were developed to provide controlled ocular drug delivery. Nanoparticles were prepared by ionic gelation and characterized by TEM, X-ray diffraction, DSC, and FTIR. In the flux study, conventional-soaked contact lenses (SM-TM-CL) showed high-burst release, while with direct drug-only laden contact lenses (DL-TM-CL) the drug was lost during extraction and sterilization, as well as having poor swelling and optical properties. The nanoparticle-laden contact lenses (TM-Cht-NPs) showed controlled release of timolol for 120 h in the presence of lysozyme, with acceptable opto-physical properties. In the shelf-life study, the TM-Cht-NPs contact lenses showed no leaching or alteration in the drug release pattern. In animal studies, the TM-NPs-CL lenses gave a high drug concentration in rabbit tear fluid (mean = 11.01 µg/mL for 56 h) and helped maintain a low intraocular pressure for 120 h. In conclusion, the chitosan nanoparticle-laden contact lenses demonstrated the potential application to treat glaucoma with acceptable opto-physical properties and addressed the issues of drug-leaching during sterilization and storage.

Evaluation of skin permeation of ß-blockers for topical drug delivery.

PURPOSE: ß-Blockers have recently become the main form of treatment of infantile hemangiomas. Due to the potential systemic adverse effects of ß-blockers, topical skin treatment of the drugs is preferred. However, the effect and mechanism of dosage form pH upon skin permeation of these weak bases is not well understood. To develop an effective topical skin delivery system for the ß-blockers, the present study evaluated skin permeation of ß-blockers propranolol, betaxolol, timolol, and atenolol. METHODS: Experiments were performed in side-by-side diffusion cells with human epidermal membrane (HEM) in vitro to determine the effect of donor solution pH upon the permeation of the ß-blockers across HEM. RESULTS: The apparent permeability coefficients of HEM for the ß-blockers increased with their lipophilicity, suggesting the HEM lipoidal pathway as the main permeation mechanism of the ß-blockers. The pH in the donor solution was a major factor influencing HEM permeation for the ß-blockers with a 2- to 4-fold increase in the permeability coefficient per pH unit increase. This permeability versus pH relationship was found to deviate from theoretical predictions, possibly due to the effective stratum corneum pH being different from the pH in the donor solution. CONCLUSIONS: The present results suggest the possibility of topical treatment of hemangioma using ß-blockers.

Timolol-loaded ethosomes for ophthalmic delivery: Reduction of high intraocular pressure in vivo.

The beta-adrenoceptor blocker timolol maleate (TML) is a commonly used pharmaceutical agent for the management of glaucoma. Conventional eye drops have limitations due to biological or pharmaceutical factors. Therefore, TML-loaded ethosomes have been designed to mitigate these restrictions and give a viable solution for reducing elevated intraocular pressure (IOP). The ethosomes were prepared using the thin film hydration method. Integrating the Box-Behnken experimental strategy, the optimal formulation was identified. The physicochemical characterization studies were performed on the optimal formulation. Then, in vitro release and ex vivo permeation studies were conducted. The irritation assessment was also carried out with Hen's Egg Test-Chorioallantoic Membrane model (HET-CAM), and in vivo evaluation of the IOP lowering effect was also performed on rats. The physicochemical characterization studies demonstrated that the components of the formulation were compatible with each other. The particle size, zeta potential, and encapsulation efficiency (EE%) were found as 88.23 ± 1.25 nm, -28.7 ± 2.03 mV, and 89.73 ± 0.42 %, respectively. The in vitro drug release mechanism was found as Korsmeyer-Peppas kinetics (R2 = 0.9923). The HET-CAM findings verified the formulation's eligibility for biological applications. The IOP measurements revealed no statistical difference (p > 0.05) between the once-a-day application of the optimal formulation and the three-times-a-day application of the conventional eye drop. A similar pharmacological response was observed at lowered application frequencies. Therefore, it was concluded that the novel TML-loaded ethosomes could be a safe and efficient alternative for glaucoma treatment.

Development of mucoadhesive Timolol loaded chitosan-nanocomposite to treat glaucoma.

Timolol Maleate is an aqueous soluble ß-blocker antiglaucoma drug used to suppress intraocular pressure. Several commercially available ocular formulations are not effective in delivering to the target site due to their water-soluble property and low mucoadhesiveness. Hence, there is a requirement for a highly mucoadhesive drug-loaded nanocomposite to suppress intraocular pressure with enhanced bioavailability. Herein, we have prepared a mucoadhesive Timolol-loaded graphene quantum dot-chitosan-nanocomposite to treat glaucoma in response to lysozyme, secreted in the tear fluid. The as-prepared nanocomposite has been characterized through high resolution-transmission electron microscopic, X-ray photoelectron spectroscopic, X-ray diffraction, and Fourier transform infrared spectral studies. The nanocomposite showed 93.74 % encapsulation efficiency with a loading capacity of 7.73 %. Further, 89.26 %, 95.62 %, and 99.29 % of drug release were observed from the nanocomposite in the presence of 1, 1.5, and 2 mg/mL of lysozyme. The mucoadhesion property has been confirmed by the increment in the particle size, fluorescence spectral variations, and Fourier transform infrared spectroscopic studies in the presence of mucin nanoparticles of size 291 nm. Interestingly, mucoadhesion has been demonstrated by pointing to the quenching in the luminescence of mucin. Further, in vitro biocompatibility assay on human corneal epithelial cells showed ≥80 % cell viability. Hence, this study offers the utilization of naturally secreting enzymes for drug delivery applications instead of uncontrolled pH and temperature-triggered releases.

Development and Validation of Facile RP-HPLC Method for Simultaneous Determination of Timolol Maleate, Moxifloxacin Hydrochloride, Diclofenac Sodium and Dexamethasone in Plasma, Aqueous Humor and Pharmaceutical Products.

The present study aimed to develop a validated RP-HPLC method for the simultaneous determination of timolol maleate (TM), moxifloxacin hydrochloride (MOXI), diclofenac sodium (DS) and dexamethasone (DEXA) in human plasma, bovine aqueous humor and pharmaceutical preparations. The chromatographic separation was studied using the C18 column. The chromatographic conditions, such as composition, pH, the flow rate of mobile phase, the temperature of column, wavelength of absorption and injection volume of the sample, were studied. The method was validated to confirm specificity, linearity and accuracy in accordance with an International Conference on Harmonization guidelines. The optimum conditions for separation included mobile phase 0.05 M monobasic phosphate buffer: acetonitrile (65:35 v/v), pH of buffer adjusted to 6.2 and the flow rate of 1 mL/minute. The optimum temperature of the column was found to be 35°C, absorption wavelength 265 nm and injection volume 50 µL. The baseline separation of all four drugs with good sensitivity, resolution, and a less than 15 min run time was achieved. The retention time of TM, MOXI, DS and DEXA were 4.3,5.7,9.9 and 13.5 minutes respectively. The limit of detection (LOD) values were 6.2, 4.8, 0.8 and 1.2 ng/mL for TM, MOXI, DS and DEXA, respectively, whereas their respective limit of quantification (LOQ) values was: were 42.6, 26.8, 5.6 and 6.2 ng/mL. The coefficient of variation for intra-day and inter-day were in the range of 0.32-1.57 and 1.29-3.07%, respectively. The method was found to be sensitive, precise and accurate in human plasma and bovine aqueous humor and can be applied for the quantification of these compounds in plasma, aqueous humor and pharmaceuticals.

The extended ocular hypotensive effect of positive liposomal cholesterol bound timolol maleate in glaucomatous rabbits.

Increased intraocular pressure (IOP) is a significant risk factor for the development of glaucoma. Timolol maleate is a beta-adrenergic receptor blocking agent and it is used for the treatment of glaucoma in order to reduce the elevated IOP that is characteristic of this eye disease. Systemic toxicity from topical timolol occurs more frequently than local toxicity and can affect the pulmonary, cardiac and central nervous systems. The objective of the present study, therefore, was to formulate multilamellar vesicles (MLVs) liposomal preparations of timolol maleate using their advantage of being less toxic compared with non-liposome-based drugs to be applied topically and to evaluate the in vivo performance of the prepared liposomes to extend the time of reduced IOP of glaucomatous rabbit's eye measured using a standard Shiotz tonometer. The encapsulation efficiency of MLVs was measured using a spectrophotometric technique. Differential scanning calorimetry (DSC) was used to monitor the effects of timolol maleate in the absence and presence of cholesterol on liposome thermal behaviour. Positively charged MLVs of timolol in the presence of a lower amount of cholesterol (DPPC(7):Chol(2):Timolol(2):SA(1) molar ratio) were found to be superior compared with other formulations in extending the ocular hypotensive effect approximately for 1 week (160 h) which encourages its physiological effectiveness. The increase of the cholesterol molar ratio in the prepared liposomal formulations serves to decrease the permeability of the lipid bilayer that is manifested by a low rate of drug release, an increased percentage of entrapment efficiency and a consequently lower bioavailability.

1H and 13C NMR characteristics of ß-blockers.

The ß-blockers are important drugs and decades of clinical experience proved their high medical status. However, to the best of our knowledge, there is no complete assignment of (1)H and (13)C NMR resonances of popular representatives: acebutolol, alpenolol, pindolol, timolol and propranolol and the published NMR data on carvedilol and atenolol are incorrect. Therefore, (1)H and (13)C NMR spectroscopy was applied for the characterization of a series of ß-adrenolytics: carvedilol (1), pindolol (2), alprenolol (3), acebutolol (4), atenolol (5), propranolol (6) and timolol (7). Two-dimensional NMR experiments (COSY, HMQC, HMBC, NOESY) allowed the unequivocal assignment of (1)H and (13)C spectra for solution (DMSO-d(6) ). Salts and bases can be easily distinguished based on (13)C chemical shifts which are within 65.0-65.5 ppm (OC2) and 46.9-47.0 (NC3) for hydrochlorides and larger, ca. 68.4 ppm (OC2) and 50.3-52.6 (NC3) for bases. NMR data of 1-7 should be included in pharmacopoeias.

Separation of amino alcohols using divalent dipeptides as counter ions in aqueous CE.

Divalent dipeptides have been introduced as counter ions in aqueous CZE. The dipeptides form ion pairs with amino alcohols in the BGE and facilitate the separation of amino alcohols. High concentrations of dipeptide caused reversed effective mobility for the analytes. The net charge of the dipeptide can be controlled using a buffer or a strong base, and regulates the interaction between the dipeptide and the amino alcohol. A stronger interaction and higher selectivity of amino alcohols was observed when the dipeptides were used as divalent counter ions, than in monovalent or uncharged form. Association constants for ion pairs between divalent dipeptides and amino alcohols can be used to enhance selectivity for amino alcohols in CZE. No chiral separation of amino alcohols was observed when using the dipeptides as ion-pairing chiral selectors in aqueous BGE, but addition of methanol to the BGE promoted enantioselectivity.

A specific cholesterol binding site is established by the 2.8 A structure of the human beta2-adrenergic receptor.

The role of cholesterol in eukaryotic membrane protein function has been attributed primarily to an influence on membrane fluidity and curvature. We present the 2.8 A resolution crystal structure of a thermally stabilized human beta(2)-adrenergic receptor bound to cholesterol and the partial inverse agonist timolol. The receptors pack as monomers in an antiparallel association with two distinct cholesterol molecules bound per receptor, but not in the packing interface, thereby indicating a structurally relevant cholesterol-binding site between helices I, II, III, and IV. Thermal stability analysis using isothermal denaturation confirms that a cholesterol analog significantly enhances the stability of the receptor. A consensus motif is defined that predicts cholesterol binding for 44% of human class A receptors, suggesting that specific sterol binding is important to the structure and stability of other G protein-coupled receptors, and that this site may provide a target for therapeutic discovery.

Rheo-dissolution: A new platform for the simultaneous measurement of rheology and drug release.

There is great potential to improve drug delivery through the use of in-situ gelling delivery systems. Here we demonstrate a technique capable of measuring changes in rheology (gelation and/or dissolution) of in-situ gelling delivery systems on contact with physiological fluid, while simultaneously analysing drug release. An ocular in-situ gelling formulation (gellan and timolol maleate) and an in-situ gelling oral liquid (alginate and metronidazole) were used as exemplar formulations. The method allowed profiling of increasing gellan concentration resulting in a reduction of timolol maleate released into simulated lacrimal fluid. When alginate was used as an in-situ gelling oral formulation there was a rapid increase in G' on contact with simulated gastric fluid. When this was changed to simulated intestinal fluid, drug release rate increased rapidly, coinciding with alginate gel dissolution. This work highlights the potential of this technology as a tool in development and optimisation of these increasingly popular delivery systems.

Multiple drug delivery from the drug-implants-laden silicone contact lens: Addressing the issue of burst drug release.

A fixed combination of bimatoprost/timolol eye drop solution is used to manage the elevated intra-ocular pressure in glaucoma patients, including individuals whose condition is poorly controlled by monotherapy. Eye drop solutions are generally given in high dose, due to poor ocular bioavailability. The high ocular dose of bimatoprost and timolol lead to hyperaemia and systemic cardiac side effects respectively. Here, we introduce multiple implant-laden contact lenses (IM) to passively deliver timolol, bimatoprost and hyaluronic acid at therapeutically relevant doses without high burst release. The drug-loaded implants were individually implanted in the outer periphery of the silicone contact lenses. Atomic force microscopy showed the smooth surface of the implant contact lens, as the implants were inside the contact lens matrix. The implant lens (IM) showed major loss of drugs [timolol = 60.60%, bimatoprost = 61.75% and HA = 46.03%] during the monomer extraction and wet sterilization, while the option of dry radiation sterilization (IM-R lens) and hydration for 24 h prior to use showed relatively lower loss of drugs [timolol = 16.87%, bimatoprost = 47.95% and HA = 24.41%]. The in-vitro drugs release data of IM-R lens, showed sustained release for 72 h, with low burst release in comparison to the soaked (SM) and direct drug-laden contact lenses (DL). The in vivo drug release data in the rabbit tear fluid showed sustained release using IM-R lens in comparison to the SM lens and eye drop therapy. The burst release with the IM-R lens was many folds reduced, which could bypass the side effects associated with multiple eye drop therapy. The in vivo pharmacodynamic study in the rabbit model showed peak and valley profile with multiple eye drop therapy, while IM-R lens showed prolong reduction in intra ocular pressure (IOP) for 120 h. The study demonstrates the application of implantation technology to deliver multiple drug through contact lenses to treat glaucoma.

Synthesis and characterization of timolol maleate-loaded quaternized chitosan-based thermosensitive hydrogel: A transparent topical ocular delivery system for the treatment of glaucoma.

The chitosan-based thermosensitive hydrogel is one of the attractive in situ forming drug delivery systems that are suggested for ophthalmic applications. However, the use of this thermogel has been limited by non-transparency, relatively low solubility and prolonged gelation time. In this study, a convenient approach has been reported to develop transparent thermosensitive hydrogel with suitable cytocompatibility and gelation properties for glaucoma treatment. After obtaining the optimum quaternization conditions, the developed in-situ gelling formulation of quaternized chitosan was achieved by mixing sodium hydrogen carbonate with ß-glycerophosphate as a gelling agent. The formulation was a solution below or at room temperature and turned to a transparent hydrogel around ocular surface temperature within several minutes. The results of thermal and rheological evaluations demonstrated that adding sodium hydrogen carbonate has a synergic effect in enhancing the thermosensitivity of the hydrogel. Also, the prepared hydrogels based on quaternized chitosan presented obvious porous architectures, good swelling, and degradability. Hemolysis and cytotoxicity evaluations suggested that the developed hydrogels indicated good biocompatibility as a drug carrier. Finally, the in vitro release profile of timolol maleate as an anti-glaucoma model drug showed the initial burst release in the early hours and a steady linear release of drug from the hydrogel over 1 week. The obtained results confirmed that the developed hydrogel can be considered as an efficient drug delivery candidate for glaucoma therapy.