Hybrid of sodium polytungstate polyoxometalate supported by the green substrate for photocatalytic degradation of auramine-O dye.

Nowadays, textile industries have severely polluted the ecosystem and water sources via disposal of highly thermo- and photo-stable dyes within the ecology that require practical strategies to remove them from nature. In studies, the photocatalytic disinfection technique has been shown to have widespread applications in indoor air, environmental health, detection, biological, biomedical, laboratory hospital, pharmaceutical food industry, plant safety, waste water, effluents disposal, and drinking water disinfection. Herein, the sodium polytungstate (SPT) polyoxometalate (POM) was synthesized through a multi-step production procedure and hence modified via employing a green protocol by using tartaric acid, glutamic acid, and kombucha solvent toward efficient and total complete removal of the highly toxic, stable, and carcinogenic auramine-O (AO) dye from aqueous media. In this regard, developed materials were well-characterized, and their photocatalysis performance for photodegradation of AO dye was examined. Achieved results showed that the optimum absorption conditions were achieved at pH of 5.0, 15 mg/L of AO concentration, 0.04 g of photocatalyst dosage, and 110 min irradiation time, where SPT and modified SPT via green protocol showed full desirability (desirability function (DF) index of 1) along with 71.75 and 100% removal percentage, respectively. Obtained results justified the superior photocatalytic role of the SPT POM and its derived nanocluster that can be used for the complete removal of highly stable dyes from aqueous media till reaching the drinking water standard.

Bioactive Graphene Quantum Dots Based Polymer Composite for Biomedical Applications.

Today, nanomedicine seeks to develop new polymer composites to overcome current problems in diagnosing and treating common diseases, especially cancer. To achieve this goal, research on polymer composites has expanded so that, in recent years, interdisciplinary collaborations between scientists have been expanding day by day. The synthesis and applications of bioactive GQD-based polymer composites have been investigated in medicine and biomedicine. Bioactive GQD-based polymer composites have a special role as drug delivery carriers. Bioactive GQDs are one of the newcomers to the list of carbon-based nanomaterials. In addition, the antibacterial and anti-diabetic potentials of bioactive GQDs are already known. Due to their highly specific surface properties, π-π aggregation, and hydrophobic interactions, bioactive GQD-based polymer composites have a high drug loading capacity, and, in case of proper correction, can be used as an excellent option for the release of anticancer drugs, gene carriers, biosensors, bioimaging, antibacterial applications, cell culture, and tissue engineering. In this paper, we summarize recent advances in using bioactive GQD-based polymer composites in drug delivery, gene delivery, thermal therapy, thermodynamic therapy, bioimaging, tissue engineering, bioactive GQD synthesis, and GQD green resuscitation, in addition to examining GQD-based polymer composites.

Shape-controlled synthesis of zinc nanostructures mediating macromolecules for biomedical applications.

Zinc nanostructures (ZnONSs) have attracted much attention due to their morphological, physicochemical, and electrical properties, which were entailed for various biomedical applications such as cancer and diabetes treatment, anti-inflammatory activity, drug delivery. ZnONS play an important role in inducing cellular apoptosis, triggering excess reactive oxygen species (ROS) production, and releasing zinc ions due to their inherent nature and specific shape. Therefore, several new synthetic organometallic method has been developed to prepare ZnO crystalline nanostructures with controlled size and shape. Zinc oxide nanostructures' crystal size and shape can be controlled by simply changing the physical synthesis condition such as microwave irradiation time, reaction temperature, and TEA concentration at reflux. Physicochemical properties which are determined by the shape and size of ZnO nanostructures, directly affect their biological applications. These nanostructures can decompose the cell membrane and accumulate in the cytoplasm, which leads to apoptosis or cell death. In this study, we reviewed the various synthesis methods which affect the nano shapes of zinc particles, and physicochemical properties of zinc nanostructures that determined the shape of zinc nanomaterials. Also, we mentioned some macromolecules that controlled their physicochemical properties in a green and biological approaches. In addition, we present the recent progress of ZnONSs in the biomedical fields, which will help centralize biomedical fields and assist their future research development.

Differentiable detection of ethanol/methanol in biological fluids using prompt graphene-based electrochemical nanosensor coupled with catalytic complex of nickel oxide/8-hydroxyquinoline.

Serious health hazards of volatile organic compounds such as methanol and ethanol for living species and their adverse effects on the environment raised a global requirement for developing a portable, precise, and sensitive detection platform capable of simultaneous and differentiable detection of alcohols in aquatic biological and non-biological fluids. Each year, methanol toxicity causes serious healthcare problems and leads to high mortalities in developing countries. Hence, designing and developing a practical nanosensor for diagnostic applications and environmental monitoring is crucial. Herein, we have addressed this demand by fabricating a portable, ultra-sensitive, and precise nanosensor capable of simultaneous and differentiable detection of methanol and ethanol in any aquatic specimen in about 1 min. The nanosensor is composed of the integrated graphene oxide (GO) flakes with the catalytic complex of NiOx and 8-hydroxyquinoline (8HQ) capable of identification of methanol and ethanol with an analytical sensitivity/detection limit of 30.66 µA(µmol/mL)-1.cm-2/6.87 nmol mL-1 and 118.99 µA(µmol/mL)-1.cm-2/1.80 nmol mL-1 using voltammetric assays between the linear range of 0.014-0.01 µmol mL-1 and 0.83-0.58 µmol mL-1, respectively. The outcome of the assessments exhibited the favorable capability of the prepared nanosensor for precise/prompt detection of alcohols in blood specimens and showed an ideal correlation with the outcome of the gold standard.

Graphene-Based Femtogram-Level Sensitive Molecularly Imprinted Polymer of SARS-CoV-2.

Rapid distribution of viral-induced diseases and weaknesses of common diagnostic platforms for accurate and sensitive identification of infected people raises an urgent demand for the design and fabrication of biosensors capable of early detection of viral biomarkers with high specificity. Accordingly, molecularly imprinted polymers (MIPs) as artificial antibodies prove to be an ideal preliminary detection platform for specific identification of target templates, with superior sensitivity and detection limit (DL). MIPs detect the target template with the "lock and key" mechanism, the same as natural monoclonal antibodies, and present ideal stability at ambient temperature, which improves their practicality for real applications. Herein, a 2D MIP platform consisting of decorated graphene oxide with the interconnected complex of polypyrrole-boronic acid is developed that can detect the trace of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antigen in aquatic biological samples with ultrahigh sensitivity/specificity with DL of 0.326 and 11.32 fg mL-1 using voltammetric and amperometric assays, respectively. Additionally, the developed MIP shows remarkable stability, selectivity, and accuracy toward detecting the target template, which paves the way for developing ultraspecific and prompt screening diagnostic configurations capable of detecting the antigen in 1 min or 20 s using voltammetric or amperometric techniques.

Bioinorganic Synthesis of Polyrhodanine Stabilized Fe3O4/Graphene Oxide in Microbial Supernatant Media for Anticancer and Antibacterial Applications.

Polyrhodanines have been broadly utilized in diverse fields due to their attractive features. The effect of polyrhodanine- (PR-) based materials on human cells can be considered a controversial matter, while many contradictions exist. In this study, we focused on the synthesis of polyrhodanine/Fe3O4 modified by graphene oxide and the effect of kombucha (Ko) supernatant on results. The general structure of synthetic compounds was determined in detail through Fourier-transform infrared spectroscopy (FT-IR). Also, obtained compounds were morphologically, magnetically, and chemically characterized using scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM), energy dispersive X-ray (EDX) analysis. The antibacterial effects of all synthesized nanomaterials were done according to CLSI against four infamous pathogens. Also, the cytotoxic effects of the synthesized compounds on the human liver cancer cell line (Hep-G2) were assessed by MTT assay. Our results showed that Go/Fe has the highest average inhibitory effect against Escherichia coli and Pseudomonas aeruginosa, and this compound possesses the least antimicrobial effect on Staphylococcus aureus. Considering the viability percent of cells in the PR/GO/Fe3O4 compound and comparing it with GO/Fe3O4, it can be understood that the toxic effects of polyrhodanine can diminish the metabolic activity of cells at higher concentrations (mostly more than 50 µg/mL), and PR/Fe3O4/Ko exhibited some promotive effects on cell growth, which enhanced the viability percent to more than 100%. Similarly, the cell viability percent of PR/GO/Fe3O4/KO compared to PR/GO/Fe3O4 is much higher, which can be attributed to the presence of kombucha in the compound. Consequently, based on the results, it can be concluded that this novel polyrhodanine-based nanocompound can act as drug carriers due to their low toxic effects and may open a new window on the antibacterial agents.

Recent Progress in Chemical Composition, Production, and Pharmaceutical Effects of Kombucha Beverage: A Complementary and Alternative Medicine.

Kombucha is a valuable traditional natural tea that contains beneficial compounds like organic acids, minerals, different vitamins, proteins, polyphenols, and several anions. Kombucha possesses anticancer, antioxidant, antimicrobial, and antifungal activity as well as hepatoprotective effects. Considering the unique properties of Kombucha, several investigations have already been conducted on its nutritional properties. In this review, an effort has been devoted to pool recent literature on the biomedical application of Kombucha under the objectives, including the chemical composition of Kombucha and industrial production, and highlight different properties of Kombucha. Finally, we explain its adverse effects and prospect. This review is an active, in-depth, and inclusive report about Kombucha and its health benefits.

Rapid ultrasound-assisted microextraction of atorvastatin in the sample of blood plasma by nickel metal organic modified with alumina nanoparticles.

In the present work, nickel-1,4-benzenedioxyacetic acid was synthesized as a rod-like metal organic material and then modified with alumina nanoparticles to synthesize nickel metal organic modified-Al2 O3 nanoparticles. The material was found as an efficient sorbent for the enrichment of atorvastatin in human blood plasma. After the extraction of the sample of plasma by ultrasound-assisted dispersive solid phase extraction, high performance liquid chromatography-ultraviolet was used to determine the quantitatively pre-concentrated interest analyte. The conditions for optimum extraction were achieved by the optimization of the volume of eluent, dosage of the sorbent, and time of sonication. Solution pH of 7.0, 250 µL of ethanol, 45 mg of the sorbent, and 10 min of sonication time were the conditions for extracting the atorvastatin maximum recovery of higher than 97.0%. By using desirability function for the optimization of the process, the present method showed a response that was linear ranging from 0.2 to 800 ng/mL with regression coefficient of 0.999 in the plasma of human blood with a satisfactory detection limit of 0.05 ng/mL, while the precision of interday for the current method was found to be <5%. It can be concluded that dispersive solid phase extraction method is effective for the extraction of atorvastatin from human plasma samples (97.4-102%) due to its easy operation, simplicity, repeatability, and reliability.

Picomolar-level detection of mercury within non-biological/biological aqueous media using ultra-sensitive polyaniline-Fe3O4-silver diethyldithiocarbamate nanostructure.

Mercury as the 3rd most toxic, non-biodegradable, and carcinogenic pollutant can adversely affect the ecosystem and health of living species through its bioaccumulation within the nature that can affect the top consumer in the food chain; therefore, it is vital to sense/remove Hg2+ within/from aqueous media using practical approaches. To address this matter, we modified the glassy carbon electrode (GCE) with ultra-sensitive, interconnected, sulfurized, and porous nanostructure consisted of polyaniline-Fe3O4-silver diethyldithiocarbamate (PANi-F-S) to enhance the sensitivity, selectivity, and limit of detection (LOD) of the sensor. Obtained results showed that at optimum conditions (i.e., pH value of 7, deposition potential of - 0.8 V, and accumulation time of 120 s), for Hg2+ concentration ranging from 0.4 to 60 nM, the modified electrode showing linear relative coefficient of 0.9983, LOD of 0.051 nM, LOQ of 0.14 nM, and sensitivity of 1618.86 µA µM-1 cm-2 highlights superior sensitivity of the developed platform until picomolar level. Additionally, the modified electrode showed ideal repeatability, stability, reproducibility, and selectivity (by considering Zn2+, Cd2+ Pb2+, Cu2+, Ni2+, and Co2+ as metal interferences) and recovered more than 99% of the Hg2+ ions within non-biological (mineral, tap, and industrial waters) and biological (blood plasma sample) fluids. Graphical abstract.

Superior X-ray Radiation Shielding Effectiveness of Biocompatible Polyaniline Reinforced with Hybrid Graphene Oxide-Iron Tungsten Nitride Flakes.

X-ray radiation is a harmful carcinogenic electromagnetic source that can adversely affect the health of living species and deteriorate the DNA of cells, thus it's vital to protect vulnerable sources from them. To address this flaw, the conductive polymeric structure of polyaniline (PANi) was reinforced with diverse filler loadings (i.e., 25 wt % and 50 wt %) of hybrid graphene oxide-iron tungsten nitride (ITN) flakes toward attenuation of X-ray beams and inhabitation of microorganisms' growth. Primary characterizations confirmed the successful decoration of graphene oxide (GO) with interconnected and highly dense structure of iron tungsten nitride with a density of about 24.21 g.cm⁻3 and reinforcement of PANi with GO-ITN. Additionally, the outcome of evaluations showed the superior performance of developed shields, where a shield with 1.2 mm thickness containing 50 wt % GO-ITN showed 131.73 % increase in the electrical conductivity (compared with neat PANi) along with 78.07%, 57.12%, and 44.99% decrease in the amplitude of the total irradiated X-ray waves at 30, 40, and 60 kVp tube voltages, respectively, compared with control X-ray dosage. More importantly, the developed shields not only showed non-toxic nature and improved the viability of cells, but also completely removed the selected microorganisms at a concentration of 1000 µg.mL-1.

Data on cytotoxic and antibacterial activity of synthesized Fe3O4 nanoparticles using Malva sylvestris.

The biosynthesis of materials using medicinal plants can be a low-cost and eco-friendly approach due to their extraordinary properties. Herein, we reported a facile synthesis of Fe3O4 nanoparticles using Malva sylvestris. The surface morphology, functional groups, and elemental analysis were done to characterize the synthesized nanoparticles. The cytotoxicity performance of the synthesized nanoparticles was analyzed by exposing nanoparticles to MCF-7 and Hep-G2 cancer cell lines through MTT colorimetric assay and the IC50 value was defined as 100 µg/mL and 200 µg/mL, respectively. The antibacterial performance of synthesized nanoparticles against four different bacterial strains including Staphylococcus aureus, Corynebacterium, Pseudomonas aeruginosa, and Klebsiella pneumoniae were assessed through microdilution broth method. The synthesized Fe3O4 nanoparticles using Malva sylvestris demonstrated higher antibacterial effects against Gram-positive strains with MIC values of 62.5 µg/mL and 125 µg/mL which increase the inhibitory percentage to more than 90%.

A facile and selective approach for enrichment of l-cysteine in human plasma sample based on zinc organic polymer: Optimization by response surface methodology.

In this research, a facile and selective method was described to extract l-cysteine (l-Cys), an essential α-amino acid for anti-ageing playing an important role in human health, from human blood plasma sample. The importance of this research was the mild and time-consuming synthesis of zinc organic polymer (Zn-MOP) as an adsorbent and evaluation of its ability for efficient enrichment of l-Cys by ultrasound-assisted dispersive micro solid-phase extraction (UA-DMSPE) method. The structure of Zn-MOP was investigated by FT-IR, XRD and SEM. Analysis of variance (ANOVA) was applied for the experimental data to reach the best optimum conditions. The quantification of l-Cys was carried out by high performance liquid chromatography with UV detection set at λ=230nm. The calibration graph showed reasonable linear responses towards l-Cys concentrations in the range of 4.0-1000µg/L (r2=0.999) with low limit of detection (0.76µg/L, S/N=3) and RSD≤2.18 (n=3). The results revealed the applicability and high performance of this novel strategy in detecting trace l-Cys by Zn-MOP in complicated matrices.