Evaluation in pig of an intestinal administration device for oral peptide delivery.

The bioavailability of peptides co-delivered with permeation enhancers following oral administration remains low and highly variable. Two factors that may contribute to this are the dilution of the permeation enhancer in the intestinal fluid, as well as spreading of the released permeation enhancer and peptide in the lumen by intestinal motility. In this work we evaluated an Intestinal Administration Device (IAD) designed to reduce the luminal dilution of drug and permeation enhancer, and to minimize movement of the dosage form in the intestinal lumen. To achieve this, the IAD utilizes an expanding design that holds immediate release mini tablets and places these in contact with the intestinal epithelium, where unidirectional drug release can occur. The expanding conformation limits movement of the IAD in the intestinal tract, thereby enabling drug release at a single focal point in the intestine. A pig model was selected to study the ability of the IAD to promote intestinal absorption of the peptide MEDI7219 formulated together with the permeation enhancer sodium caprate. We compared the IAD to intestinally administered enteric coated capsules and an intestinally administered solution. The IAD restricted movement of the immediate release tablets in the small intestine and histological evaluation of the mucosa indicated that high concentrations of sodium caprate were achieved. Despite significant effect of the permeation enhancer on the integrity of the intestinal epithelium, the bioavailability of MEDI7219 was of the same order of magnitude as that achieved with the solution and enteric coated capsule formulations (2.5-3.8%). The variability in plasma concentrations of MEDI7219 were however lower when delivered using the IAD as compared to the solution and enteric coated capsule formulations. This suggests that dosage forms that can limit intestinal dilution and control the position of drug release can be a way to reduce the absorptive variability of peptides delivered with permeation enhancers but do not offer significant benefits in terms of increasing bioavailability.

Manipulations and age-appropriateness of oral medications in pediatric oncology patients in Sweden: Need for personalized dosage forms.

Due to the lack of age-appropriate formulations for children, healthcare professionals and caregivers frequently manipulate dosage forms to facilitate oral administration and obtain the required dose. In this study, we investigated drug manipulation and age-appropriateness of oral medications for pediatric oncology patients with the aim of identifying the therapeutic needs for personalized dosage forms. An observational study at a pediatric oncology ward, combined with analysis of the age-appropriateness of the oral medications, was performed. Nurses frequently manipulated solid dosage forms to administer them via enteral feeding tubes. Of the active pharmaceutical ingredients (APIs) assessed for age-appropriateness, 74% (29 of 39) were identified to need personalization, either because of lack of child-friendly dosage form, suitable dosage strength, or both. Most APIs, due to limited solubility, were sensitive to formulation changes, such as drug manipulation. This study demonstrates problems and therapeutic needs regarding oral dosage forms in treatment of children with cancer. Expertise in formulation design, new manufacturing technologies, and patient-centered information are needed to address age-appropriate formulations for children.

Utilizing Laser Activation of Photothermal Plasmonic Nanoparticles to Induce On-Demand Drug Amorphization inside a Tablet.

Poor aqueous drug solubility represents a major challenge in oral drug delivery. A novel approach to overcome this challenge is drug amorphization inside a tablet, that is, on-demand drug amorphization. The amorphous form is a thermodynamically instable, disordered solid-state with increased dissolution rate and solubility compared to its crystalline counterpart. During on-demand drug amorphization, the drug molecularly disperses into a polymer to form an amorphous solid at elevated temperatures inside a tablet. This study investigates, for the first time, the utilization of photothermal plasmonic nanoparticles for on-demand drug amorphization as a new pharmaceutical application. For this, near-IR photothermal plasmonic nanoparticles were tableted together with a crystalline drug (celecoxib) and a polymer (polyvinylpyrrolidone). The tablets were subjected to a near-IR laser at different intensities and durations to study the rate of drug amorphization under each condition. During laser irradiation, the plasmonic nanoparticles homogeneously heated the tablet. The temperature was directly related to the rate and degree of amorphization. Exposure times as low as 180 s at 1.12 W cm-2 laser intensity with only 0.25 wt % plasmonic nanoparticles and up to 50 wt % drug load resulted in complete drug amorphization. Therefore, near-IR photothermal plasmonic nanoparticles are promising excipients for on-demand drug amorphization with laser irradiation.

In Vitro and In Vivo Evaluation of 3D Printed Capsules with Pressure Triggered Release Mechanism for Oral Peptide Delivery.

In this study a 3D printed capsule designed to break from the physiological pressures in the antropyloric region was evaluated for its ability to deliver the synthetic octapeptide octreotide in beagle dogs when co-formulated with the permeation enhancer sodium caprate. The pressure sensitive capsules were compared to traditional enteric coated hard gelatin capsules and enteric coated tablets. Paracetamol, which is completely absorbed in dogs, was included in the formulations and used as an absorption marker to give information about the in vivo performance of the dosage forms. The pressure sensitive capsules released drug in 50% of the dogs. In the cases where drug was released, there was no difference in octreotide bioavailability or Cmax compared to the enteric coated dosage forms. When comparing all dosage forms, a correlation was seen between paracetamol Cmax and octreotide bioavailability, suggesting that a high drug release rate may be beneficial for peptide absorption when delivered together with sodium caprate.

Insights into Dissolution and Solution Chemistry of Multidrug Formulations of Antihypertensive Drugs.

Using fixed dose combinations of drugs instead of administering drugs separately can be beneficial for both patients and the health care system, but the current understanding of how multidrug formulations work at the molecular level is still in its infancy. Here, we explore dissolution, solubility, and supersaturation of various drug combinations in amorphous formulations. The effect of chemical structural similarity on combination behavior was investigated by using structurally related compounds of both drugs. The effect of polymer type on solution behavior was also evaluated using chemically diverse polymers. Indapamide (IPM) concentration decreased when combined with felodipine (FDN) or its analogues, which occurred even when the IPM solution was undersaturated. The extent of solubility decrease of FDN was less than that of IPM from the dissolution of an equimolar formulation of the drugs. No significant solubility decrease was observed for FDN at low contents of IPM which was also observed for other dihydropyridines, whereas FDN decreases at high contents of IPM. This was explained by the complex nature of the colloidal precipitates of the combinations which impacts the chemical potential of the drugs in solution at different levels. The maximum achievable concentration of FDN and IPM during dissolution of the polyvinylpyrrolidone-based amorphous solid dispersion was higher than the value measured with the hydroxypropyl methylcellulose acetate succinate-based formulation. This emphasizes the significance of molecular properties and chemical diversity of drugs and polymers on solution chemistry and solubility profiles. These findings may apply to drugs administered as a single dosage form or in separate dosage forms and hence need to be well controlled to assure effective treatments and patient safety.

Model-Informed Drug Development in Pulmonary Delivery: Semimechanistic Pharmacokinetic-Pharmacodynamic Modeling for Evaluation of Treatments against Chronic Pseudomonas aeruginosa Lung Infections.

Antibiotic resistance is a major public health threat worldwide, and among others, about 80% of cystic fibrosis patients have chronic Pseudomonas aeruginosa (PA) lung infection resistant to many current antibiotics. Novel treatment strategies are therefore urgently needed. For lung infections, direct delivery of treatments to the site of action in the airway can achieve a higher local concentration with minimal systemic exposure and hence avoid risks of unwanted systemic adverse effects. Previously, a rat preclinical disease model for PA chronic lung infections has been reported. However, the role of this disease model in the development of new treatment has not been thoroughly evaluated. In this study, tobramycin (TOB) was used as a model antibiotic to evaluate the application of this preclinical disease model for PA treatments. The obtained data were used for pharmacokinetic-pharmacodynamic (PKPD) modeling. Plasma samples following pulmonary delivery of TOB via different dosing methods as well as growth and efficacy data from the chronic lung infection disease model following TOB treatments were collected for analysis and modeling. The developed PKPD model incorporates a semimechanistic description on biofilm development in chronic infections to allow the evaluation of drug action on bacteria in different states (i.e., planktonic, biofilm, and latent) and describes the available data from the efficacy study. The PKPD model can be used to support the application of the preclinical lung infection disease model by providing a quantitative description of the drug exposure-response relationship and a mechanistic platform to integrate all available PK and PKPD data with predictive capacity. With the support of appropriate experimental designs, the model can be further extended for other applications to, for instance, study the transition of bacteria between states and describe drug actions on biofilms.

The Permeation of Acamprosate Is Predominantly Caused by Paracellular Diffusion across Caco-2 Cell Monolayers: A Paracellular Modeling Approach.

In drug development, estimating fraction absorbed (Fa) in man for permeability-limited compounds is important but challenging. To model Fa of such compounds from apparent permeabilities (Papp) across filter-grown Caco-2 cell monolayers, it is central to elucidate the intestinal permeation mechanism(s) of the compound. The present study aims to refine a computational permeability model to investigate the relative contribution of paracellular and transcellular routes to the Papp across Caco-2 monolayers of the permeability-limited compound acamprosate having a bioavailability of ∼11%. The Papp values of acamprosate and of several paracellular marker molecules were measured. These Papp values were used to refine system-specific parameters of the Caco-2 monolayers, that is, paracellular pore radius, pore capacity, and potential drop. The refined parameters were subsequently used as an input in modeling the permeability (Pmodeled) of the tested compounds using mathematical models collected from two published permeability models. The experimental data show that acamprosate Papp across Caco-2 monolayers is low and similar in both transport directions. The obtained acamprosate Papp, 1.56 ± 0.28 × 10-7 cm·s-1, is similar to the Papp of molecular markers for paracellular permeability, namely, mannitol (2.72 ± 0.24 × 10-7 cm·s-1), lucifer yellow (1.80 ± 0.35 × 10-7 cm·s-1), and fluorescein (2.10 ± 0.28 × 10-7 cm·s-1), and lower than that of atenolol (7.32 ± 0.60 × 10-7 cm·s-1; mean ± SEM, n = 3-6), while the end-point amount of acamprosate internalized by the cell monolayer, Qmonolayer, was lower than that of mannitol. Acamprosate did not influence the barrier function of the monolayers since it altered neither the Papp of the three paracellular markers nor the transepithelial electrical resistance (TEER) of the cell monolayer. The Pmodeled for all the paracellular markers and acamprosate was dominated by the Ppara component and matched the experimentally obtained Papp. Furthermore, acamprosate did not inhibit the uptake of probe substrates for solute carriers PEPT1, TAUT, PAT1, EAAT1, B0,+AT/rBAT, OATP2B1, and ASBT expressed in Caco-2 cells. Thus, the Pmodeled estimated well Ppara, and the paracellular route appears to be the predominant mechanism for acamprosate Papp across Caco-2 monolayers, while the alternative transcellular routes, mediated by passive diffusion or carriers, are suggested to only play insignificant roles.

Model-Based Drug Development in Pulmonary Delivery: Pharmacokinetic Analysis of Novel Drug Candidates for Treatment of Pseudomonas aeruginosa Lung Infection.

Antibiotic resistance is a major public health threat worldwide. In particular, about 80% of cystic fibrosis patients have chronic Pseudomonas aeruginosa (PA) lung infection resistant to many current antibiotics. We are therefore developing a novel class of antivirulence agents, quorum sensing inhibitors (QSIs), which inhibit biofilm formation and sensitize PA to antibiotic treatments. For respiratory conditions, targeted delivery to the lung could achieve higher local concentrations with reduced risk of adverse systemic events. In this study, we report the pharmacokinetics of 3 prototype QSIs after pulmonary delivery, and the simultaneous analysis of the drug concentration-time profiles from bronchoalveolar lavage, lung homogenate and plasma samples, using a pharmacometric modeling approach. In addition to facilitating the direct comparison and selection of drug candidates, the developed model was used for dosing simulation studies to predict in vivo exposure following different dosing scenarios. The results show that systemic clearance has limited impact on local drug exposure in the lung after pulmonary delivery. Therefore, we suggest that novel QSIs designed for pulmonary delivery as targeted treatments for respiratory conditions should ideally have a long residence time in the lung for local efficacy with rapid clearance after systemic absorption for reduced risk of systemic adverse events.

Mechanism-based selection of stabilization strategy for amorphous formulations: Insights into crystallization pathways.

We developed a step-by-step experimental protocol using differential scanning calorimetry (DSC), dynamic vapour sorption (DVS), polarized light microscopy (PLM) and a small-scale dissolution apparatus (µDISS Profiler) to investigate the mechanism (solid-to-solid or solution-mediated) by which crystallization of amorphous drugs occurs upon dissolution. This protocol then guided how to stabilize the amorphous formulation. Indapamide, metolazone, glibenclamide and glipizide were selected as model drugs and HPMC (Pharmacoat 606) and PVP (K30) as stabilizing polymers. Spray-dried amorphous indapamide, metolazone and glibenclamide crystallized via solution-mediated nucleation while glipizide suffered from solid-to-solid crystallization. The addition of 0.001%-0.01% (w/v) HPMC into the dissolution medium successfully prevented the crystallization of supersaturated solutions of indapamide and metolazone whereas it only reduced the crystallization rate for glibenclamide. Amorphous solid dispersion (ASD) formulation of glipizide and PVP K30, at a ratio of 50:50% (w/w) reduced but did not completely eliminate the solid-to-solid crystallization of glipizide even though the overall dissolution rate was enhanced both in the absence and presence of HPMC. Raman spectroscopy indicated the formation of a glipizide polymorph in the dissolution medium with higher solubility than the stable polymorph. As a complementary technique, molecular dynamics (MD) simulations of indapamide and glibenclamide with HPMC was performed. It was revealed that hydrogen bonding patterns of the two drugs with HPMC differed significantly, suggesting that hydrogen bonding may play a role in the greater stabilizing effect on supersaturation of indapamide, compared to glibenclamide.

In vitro and in silico strategies to identify OATP1B1 inhibitors and predict clinical drug-drug interactions.

PURPOSE: To establish in vitro and in silico models that predict clinical drug-drug interactions (DDIs) with the OATP1B1 (SLCO1B1) transporter. METHODS: The inhibitory effect of 146 drugs and drug-like compounds on OATP1B1-mediated transport was studied in HEK293 cells. A computational model was developed to predict OATP1B1 inhibition. Concentration-dependent effects were investigated for six compounds; clinical DDIs were predicted by calculating change in exposure (i.e. R-values) in eight different ways. RESULTS: Sixty-five compounds were identified as OATP1B1 inhibitors at 20 µM. The computational model predicted the test set with 80% accuracy for inhibitors and 91% for non-inhibitors. In vitro-in vivo comparisons underscored the importance of using drugs with known clinical effects as references. Thus, reference drugs, cyclosporin A, gemfibrozil, and fenofibrate, provided an inhibition interval to which three antiviral drugs, atazanavir, lopinavir, and amprenavir, could be compared and their clinical DDIs with OATP1B1 classified. CONCLUSIONS: Twenty-two new OATP1B1 inhibitors were identified, a predictive OATP1B1 inhibition in silico model was developed, and successful predictions of clinical DDIs were obtained with OATP1B1.

Hepatitis C virus NS3 protease inhibitors: large, flexible molecules of peptide origin show satisfactory permeability across Caco-2 cells.

The purpose of this study was to investigate the intestinal absorption of tripeptide-based compounds intended for treatment of hepatitis C virus (HCV) infection. The intestinal permeability of 11 HCV NS3 protease inhibitors (Mw 687-841, ClogD(pH 7.4) 1.2-7.3 and 10-13 hydrogen bond donors/acceptors) was measured using Caco-2 cells. Each compound was investigated in the apical to basolateral (a-b) and basolateral to apical (b-a) direction at pH 7.4. For compounds displaying efflux the experiment was repeated in the presence of 1 microM GF120918 to investigate possible involvement of P-glycoprotein (Pgp; ABCB1). All compounds displayed intermediate to high permeability. Seven of them showed extensive efflux, with 31-114-fold higher permeability in the b-a direction than the a-b direction. Addition of the Pgp inhibitor GF120918 reduced the b-a transport rate for the effluxed compounds. However, for inhibitors with a C-terminal carboxylic acid and the acidic bioisosteres thereof the efflux was still significant. Hence, the negative charge resulted in efflux by other ABC-transporters than Pgp. From this study it can be concluded that small changes in the overall structure can lead to a large variation in permeability and efflux as shown by the inhibitors herein, properties that also may influence the resulting inhibition potency of the compounds when performing cell-based pharmacological assays.

Identification of novel specific and general inhibitors of the three major human ATP-binding cassette transporters P-gp, BCRP and MRP2 among registered drugs.

PURPOSE: To study the inhibition patterns of the three major human ABC transporters P-gp (ABCB1), BCRP (ABCG2) and MRP2 (ABCC2), using a dataset of 122 structurally diverse drugs. METHODS: Inhibition was investigated in cellular and vesicular systems over-expressing single transporters. Computational models discriminating either single or general inhibitors from non-inhibitors were developed using multivariate statistics. RESULTS: Specific (n = 23) and overlapping (n = 19) inhibitors of the three ABC transporters were identified. GF120918 and Ko143 were verified to specifically inhibit P-gp/BCRP and BCRP in defined concentration intervals, whereas the MRP inhibitor MK571 was revealed to inhibit all three transporters within one log unit of concentration. Virtual docking experiments showed that MK571 binds to the ATP catalytic site, which could contribute to its multi-specific inhibition profile. A computational model predicting general ABC inhibition correctly classified 80% of both ABC transporter inhibitors and non-inhibitors in an external test set. CONCLUSIONS: The inhibitor specificities of P-gp, BCRP and MRP2 were shown to be highly overlapping. General ABC inhibitors were more lipophilic and aromatic than specific inhibitors and non-inhibitors. The identified specific inhibitors can be used to delineate transport processes in complex experimental systems, whereas the multi-specific inhibitors are useful in primary ABC transporter screening in drug discovery settings.

Structural requirements for drug inhibition of the liver specific human organic cation transport protein 1.

The liver-specific organic cation transport protein (OCT1; SLC22A1) transports several cationic drugs including the antidiabetic drug metformin and the anticancer agents oxaliplatin and imatinib. In this study, we explored the chemical space of registered oral drugs with the aim of studying the inhibition pattern of OCT1 and of developing predictive computational models of OCT1 inhibition. In total, 191 structurally diverse compounds were examined in HEK293-OCT1 cells. The assay identified 47 novel inhibitors and confirmed 15 previously known inhibitors. The enrichment of OCT1 inhibitors was seen in several drug classes including antidepressants. High lipophilicity and a positive net charge were found to be the key physicochemical properties for OCT1 inhibition, whereas a high molecular dipole moment and many hydrogen bonds were negatively correlated to OCT1 inhibition. The data were used to generate OPLS-DA models for OCT1 inhibitors; the final model correctly predicted 82% of the inhibitors and 88% of the noninhibitors of the test set.

Prediction and identification of drug interactions with the human ATP-binding cassette transporter multidrug-resistance associated protein 2 (MRP2; ABCC2).

The chemical space of registered oral drugs was explored for inhibitors of the human multidrug-resistance associated protein 2 (MRP2; ABCC2), using a data set of 191 structurally diverse drugs and drug-like compounds. The data set included a new reference set of 75 compounds, for studies of hepatic drug interactions with transport proteins, CYP enzymes, and compounds associated with liver toxicity. The inhibition of MRP2-mediated transport of estradiol-17beta-D-glucuronide was studied in inverted membrane vesicles from Sf9 cells overexpressing human MRP2. A total of 27 previously unknown MRP2 inhibitors were identified, and the results indicate an overlapping but narrower inhibitor space for MRP2 compared with the two other major ABC efflux transporters P-gp (ABCB1) and BCRP (ABCG2). In addition, 13 compounds were shown to stimulate the transport of estradiol-17beta-D-glucuronide. The experimental results were used to develop a computational model able to discriminate inhibitors from noninhibitors according to their molecular structure, resulting in a predictive power of 86% for the training set and 72% for the test set. The inhibitors were in general larger and more lipophilic and presented a higher aromaticity than the noninhibitors. The developed computational model is applicable in an early stage of the drug discovery process and is proposed as a tool for prediction of MRP2-mediated hepatic drug interactions and toxicity.

A global drug inhibition pattern for the human ATP-binding cassette transporter breast cancer resistance protein (ABCG2).

In this article, we explore the entire structural space of registered drugs to obtain a global model for the inhibition of the drug efflux transporter breast cancer resistance protein (BCRP; ABCG2). For this purpose, the inhibitory effect of 123 structurally diverse drugs and drug-like compounds on mitoxantrone efflux was studied in Saos-2 cells transfected with human wild-type (Arg482) BCRP. The search for BCRP inhibitors throughout the drug-like chemical space resulted in the identification of 29 previously unknown inhibitors. The frequency of BCRP inhibition was 3 times higher for compounds reported to interact with other ATP-binding cassette (ABC) transporters than for compounds without reported ABC transporter affinity. An easily interpreted computational model capable of discriminating inhibitors from noninhibitors using only two molecular descriptors, octanol-water partition coefficient at pH 7.4 and molecular polarizability, was constructed. The discriminating power of this two-descriptor model was 93% for the training set and 79% for the test set, respectively. The results were supported by a global pharmacophore model and are in agreement with a two-step mechanism for the inhibition of BCRP, where both the drug's capacity to insert into the cell membrane and to interact with the inhibitory binding site of the transporter are important.