Direct Thermal Growth of Gold Nanopearls on 3D Interweaved Hydrophobic Fibers as Ultrasensitive Portable SERS Substrates for Clinical Applications.

Surface-enhanced Raman spectroscopy (SERS)-based biosensors have attracted much attention for their label-free detection, ultrahigh sensitivity, and unique molecular fingerprinting. In this study, a wafer-scale, ultrasensitive, highly uniform, paper-based, portable SERS detection platform featuring abundant and dense gold nanopearls with narrow gap distances, are prepared and deposited directly onto ultralow-surface-energy fluorosilane-modified cellulose fibers through simple thermal evaporation by delicately manipulating the atom diffusion behavior. The as-designed paper-based SERS substrate exhibits an extremely high Raman enhancement factor (3.9 × 1011 ), detectability at sub-femtomolar concentrations (single-molecule level) and great signal reproductivity (relative standard deviation: 3.97%), even when operated with a portable 785-nm Raman spectrometer. This system is used for fingerprinting identification of 12 diverse analytes, including clinical medicines (cefazolin, chloramphenicol, levetiracetam, nicotine), pesticides (thiram, paraquat, carbaryl, chlorpyrifos), environmental carcinogens (benzo[a]pyrene, benzo[g,h,i]perylene), and illegal drugs (methamphetamine, mephedrone). The lowest detection concentrations reach the sub-ppb level, highlighted by a low of 16.2 ppq for nicotine. This system appears suitable for clinical applications in, for example, i) therapeutic drug monitoring for individualized medication adjustment and ii) ultra-early diagnosis for pesticide intoxication. Accordingly, such scalable, portable and ultrasensitive fibrous SERS substrates open up new opportunities for practical on-site detection in biofluid analysis, point-of-care diagnostics and precision medicine.

Plasmonic nanoparticle-film calipers for rapid and ultrasensitive dimensional and refractometric detection.

In this study, we develop an ultrasensitive nanoparticle (NP)-film caliper that functions with high resolution (angstrom scale) in response to both the dimensions and refractive index of the spacer sandwiched between the NPs and the film. The anisotropy of the plasmonic gap mode in the NP-film caliper can be characterized readily using spectroscopic ellipsometry (SE) without the need for further optical modeling. To the best of our knowledge, this paper is the first to report the use of SE to study the plasmonic gap modes in NP-film calipers and to demonstrate that SE is a robust and convenient method for analyzing NP-film calipers. The high sensitivity of this system originates from the plasmonic gap mode in the NP-film caliper, induced by electromagnetic coupling between the NPs and the film. The refractometric sensitivity of this NP-film caliper reaches up to 314 nm per RIU, which is superior to those of other NP-based sensors. The NP-film caliper also provides high dimensional resolution, down to the angstrom scale. In this study, the shift in wavelength in response to the change in gap spacing is approximately 9 nm Å(-1). Taking advantage of the ultrasensitivity of this NP-film caliper, we develop a platform for discriminating among thiol-containing amino acids.

Low pressure radio-frequency oxygen plasma induced oxidation of titanium--surface characteristics and biological effects.

OBJECTIVE: This research was designed to investigate the effects of low pressure radio-frequency (RF) oxygen plasma treatment (OPT) on the surface of commercially pure titanium (CP-Ti) and Ti6Al4V. Surface topography, elemental composition, water contact angle, cell viability, and cell morphology were surveyed to evaluate the biocompatibility of titanium samples with different lengths of OP treating time. MATERIALS AND METHODS: CP-Ti and Ti6Al4V discs were both classified into 4 groups: untreated, treated with OP generated by using oxygen (99.98%) for 5, 10, and 30 min, respectively. After OPT on CP-Ti and Ti6Al4V samples, scanning probe microscopy, X-ray photoelectron spectrometry (XPS), and contact angle tests were conducted to determine the surface topography, elemental composition and hydrophilicity, respectively. The change of surface morphology was further studied using sputtered titanium on silicon wafers. 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay and F-actin immunofluorescence stain were performed to investigate the viability and spreading behavior of cultivated MG-63 cells on the samples. RESULTS: The surface roughness was most prominent after 5 min OPT in both CP-Ti and Ti6Al4V, and the surface morphology of sputtered Ti sharpened after the 5 min treatment. From the XPS results, the intensity of Ti(°), Ti(2+), and Ti(3+) of the samples' surface decreased indicating the oxidation of titanium after OPT. The water contact angles of both CP-Ti and Ti6Al4V were increased after 5 min OPT. The results of MTT assay demonstrated MG-63 cells proliferated best on the 5 min OP treated titanium sample. The F-actin immunofluorescence stain revealed the cultivated cell number of 5 min treated CP-Ti/Ti6Al4V was greater than other groups and most of the cultivated cells were spindle-shaped. CONCLUSIONS: Low pressure RF oxygen plasma modified both the composition and the morphology of titanium samples' surface. The CP-Ti/Ti6Al4V treated with 5 min OPT displayed the roughest surface, sharpest surface profile and best biocompatibility.

Eco-friendly plasmonic sensors: using the photothermal effect to prepare metal nanoparticle-containing test papers for highly sensitive colorimetric detection.

Convenient, rapid, and accurate detection of chemical and biomolecules would be a great benefit to medical, pharmaceutical, and environmental sciences. Many chemical and biosensors based on metal nanoparticles (NPs) have been developed. However, as a result of the inconvenience and complexity of most of the current preparation techniques, surface plasmon-based test papers are not as common as, for example, litmus paper, which finds daily use. In this paper, we propose a convenient and practical technique, based on the photothermal effect, to fabricate the plasmonic test paper. This technique is superior to other reported methods for its rapid fabrication time (a few seconds), large-area throughput, selectivity in the positioning of the NPs, and the capability of preparing NP arrays in high density on various paper substrates. In addition to their low cost, portability, flexibility, and biodegradability, plasmonic test paper can be burned after detecting contagious biomolecules, making them safe and eco-friendly.

Extended red light harvesting in a poly(3-hexylthiophene)/iron disulfide nanocrystal hybrid solar cell.

A polymer solar cell based on poly(3-hexylthiophene) (P3HT)/iron disulfide (FeS2) nanocrystal (NC) hybrid is presented. The FeS2 NCs of 10 nm in diameter were homogeneously blended with P3HT to form an active layer of a solar cell. An extended red light harvesting up to 900 nm resulting from the NCs in the device has been demonstrated, compared to a typical absorption edge of 650 nm of a pristine P3HT. The environmentally friendly and low-cost FeS2 NCs can be used as a promising candidate for an acceptor in the polymer solar cell device application with an enhanced photovoltaic response in the extended red light region.