3D-printed polycaprolactone scaffolds coated with beta tricalcium phosphate for bone regeneration.

BACKGROUND/PURPOSE: 3D-printing technology is an important tool for the bone tissue engineering (BTE). The aim of this study was to investigate the interaction of polycaprolactone (PCL) scaffolds and modified mesh PCL coated with beta TCP (PCL/ß-TCP) scaffolds with MG-63. METHODS: This study used the fused deposition modeling (FDM) technique with the 3D printing technique to fabricate the thermoplastic polymer and composite scaffolds. Scaffold structure and coating quality were observed under a scanning electron microscope (SEM). MG-63 cells were injected and attached to the mesh-manufactured PCL scaffolds. The biocompatibility of mesh structured PCL and PCL/ß-TCP scaffolds could be examined by measuring the viability of MG-63 cells of MTT assay. Bone cell differentiation was evaluated ALP activity by mineralization assay. RESULTS: The results showed that both mesh PCL scaffolds and PCL/ß-TCP scaffolds were non-toxic to the cells. The ALP activities of cells in PCL/ß-TCP scaffolds groups were significant differences and better than PCL groups in all groups at all experimental dates. The mineralization process was time-dependent, and significantly higher mineralization of osteosarcoma cells was observed on PCL/ß-TCP scaffolds at experimental dates. CONCLUSION: We concluded that both meshes structured PCL and PCL/ß-TCP scaffolds could promote the MG-63 cell growth, and PCL/ß-TCP was better than the PCL scaffolds for the outcome of MG63 cell differentiation and mineralization.

Action of econazole on Ca2+ levels and cytotoxicity in OC2 human oral cancer cells.

Background/purpose: Econazole is an antifungal drug. Antifungal activity of econazole against non-dermatophyte molds was reported. Econazole inhibited Ca2+ channels and stimulated cytotoxicity in lymphoma and leukemia cells. Ca2+ cations are crucial second envoy that triggers various processes. This research was aimed to investigate action of econazole on Ca2+ levels and cytotoxicity in OC2 human oral cancer cells. Materials and methods: Cytosolic Ca2+ levels ([Ca2+]i) were detected employing fura-2 as a probe in a RF-5301PC spectrofluorophotometer (Shimadzu). Cytotoxicity was determined using 4-[3-[4-lodophenyl]-2-4(4-nitrophenyl)-2H-5-tetrazolio-1,3-benzene disulfonate] (WST-1) to detect fluorescence changes. Results: Econazole at 10-50 µmol/L provoked [Ca2+]i raises. Forty % of 50 µml//L econazole-induced signal was diminished when external Ca2+ was eliminated. The Ca2+ influx provoked by econazole was suppressed by different degrees by store-induced Ca2+ influx suppressors SKF96365 and nifedipine; GF109203X (a protein C [PKC] inhibitor); an extracellular signaling pathway (ERK) 1/2 blocker PD98059, and phospholipase A2 suppressor aristolochic acid, but was enhanced by phorbol 12-myristate 13 acetate (PMA; a PKC activator) by 18%. Without external Ca2+, econazole-caused [Ca2+]i raises were abolished by thapsigargin. In contrast, econazole partially suppressed the [Ca2+]i raises caused by thapsigargin. U73122 fell short to change econazole-caused [Ca2+]i responses. Econazole (10-70 µmol/L) elicited cytotoxicity in a dose-dependent fashion. Blockade of 50 µmol/L econazole-induced [Ca2+] rises with BAPTA/AM enhanced econazole-induced cytotoxicity by 72%. Conclusion: Econazole evoked [Ca2+]i raises and provoked cytotoxicity in a concentration-dependent manner in OC2 human oral cancer cells. In Ca2+-containing solution, BAPTA/AM enhanced 50 µmol/L econozole-induced cytotoxicity.

Efficacy of polyacrylate silver salt/polyvinylpyrrolidone-based liquid oral gel in management of concurrence chemoradiotherapy-induced oral mucositis.

BACKGROUND/PURPOSE: Acute oral mucositis (OM) is a painful complication of concurrent chemoradiotherapy (CCRT). This severe adverse symptom may impact on patient's quality of life, lead to malnutrition. Thus, finding more effective methods in OM management is very important. The purpose of this study is to evaluate the efficacy of polyacrylate silver salt/Polyvinylpyrrolidone-based liquid oral gel (named as polyacrylate silver salt oral gel) in improving the symptomatic relief of CCRT-induced oral mucositis and oral dysfunction in neck and head cancer patients. METHODS: In this study, 24 oral cancer patients underwent CCRT and having OM grade 2 or higher were randomly assigned into the test group and the control group. Both groups followed Multinational Association of Supportive Care in Cancer and International Society of Oral Oncology (MASCC/ISOO) clinical practice guidelines for the management of mucositis, but adding rinsing with 15 g oral gel right after oral hygiene treaded the test group. Clinical OM and oral function were assessed weekly for 4 consecutive weeks till 5-10 days after the completion of radiotherapy. For evaluation, Common Terminology Criteria for Adverse Events (CTCAE) v3.0 was used for collecting the data of OM grade. RESULTS: The results showed that polyacrylate silver salt oral gel had better effect for relieving the oral mucositis. There were statistically significant differences in OM grades (1.59 vs. 2.8, p < 0.0001) between the test group and the control group. CONCLUSION: Our clinical studies demonstrated that polyacrylate silver salt oral gel is an effective interventional option in terms of rapid mucositis healing.

Comparison of periodontal health of primary teeth restored with zirconia and stainless steel crowns: A systemic review and meta-analysis.

BACKGROUND/PURPOSE: In children, the use of stainless steel crowns to treat caries has a high success rate. However, due to the unnatural color of stainless steel crowns, it still needs to modify crown types. The present meta-analysis study aims to explore the previous articles on the comparison of stainless steel crowns and zirconia crowns. METHODS: The systematic search of studies on the comparison of zirconia crowns and stainless steel crowns for primary teeth was mainly in PubMed and Cochrane database. The standardized mean differences (SMDs) of gingival health between zirconia crowns and stainless steel crowns comprised the primary outcome, and the SMDs of plaque index compared two crown treatments was treated as the secondary outcome. RESULTS: The meta-analysis extracted 187 papers from various databases and collected five randomized controlled trials, four comparisons on deciduous molars and one comparison on deciduous incisors. 160 children were included, ranging in age from 3-9 years old. The quantitative analysis showed a significantly lower gingival index of zirconia crowns in the primary molar group and the primary incisor group. The plaque index between two crown treatments groups was -4.51, indicating less accumulation of plaque on zirconia crown. However, the heterogeneity of included trials still need to be considered. CONCLUSION: Zirconia crowns for deciduous teeth had its advantages for gingival health. Although stainless steel crowns were more likely to have plaque deposition and gingival inflammation, zirconia crowns relatively caused the opposite tooth wearing and chipping. Therefore, the comprehensive consideration is important to choose deciduous tooth crown.

Challenge Tooth Regeneration in Adult Dogs with Dental Pulp Stem Cells on 3D-Printed Hydroxyapatite/Polylactic Acid Scaffolds.

Tooth regeneration is an important issue. The purpose of this study was to explore the feasibility of using adult dental pulp stem cells on polylactic acid scaffolds for tooth regeneration. Three teeth were extracted from each side of the lower jaws of two adult dogs. In the experimental group, dental pulp stem cells were isolated and seeded in the 3D-printed hydroxyapatite/polylactic acid (HA/PLA) scaffolds for transplantation into left lower jaw of each dog. The right-side jaw of each dog was transplanted with cell-free scaffolds as the control group. Polychrome sequentially labeling was performed for observation of mineralization. Dental cone beam computed tomography (CBCT) irradiation was used for assessment. Nine months after surgery, dogs were euthanized, and the lower jaws of dogs were sectioned and fixed for histological observation with hematoxylin and eosin staining. The results showed that the degree of mineralization in the experimental group with cells seeded in the scaffolds was significantly higher than that of the control group transplanted with cell-free scaffolds. However, the HA/PLA scaffolds were not completely absorbed in both groups. It is concluded that dental pulp stem cells are important for the mineralization of tooth regeneration. A more rapid absorbable material was required for scaffold design for tooth regeneration.

Developing a novel cholesterol-based nanocarrier with high transfection efficiency and serum compatibility for gene therapy.

BACKGROUND/PURPOSE: Primary cells are sensitive to culture conditions, which can be more difficult to get efficient transfection. The purpose of this study is to develop a serum-compatible cholesterol-based nanocarrier for delivering therapeutic nucleic acids into cells efficiently for future clinical gene therapy. METHODS: A novel cationic 3-ß-[N-(2-guanidinoethyl)carbamoyl]-cholesterol (GEC-Chol) was mixed with cholesterol and superparamagnetic iron oxide (SPIO) nanoparticles to form GCC-Fe3O4 nanocarrier. Transfection efficiency and cytotoxicity in serum and non-serum conditions were evaluated. Florescent-labeled oligonucleotides (ODNs) were transfected as indicators. Fluorescent microscopy, confocal microscopy, and flow cytometry analysis were used for evaluations. Besides, we also delivered functional antisense c-myc ODNs as surrogates for specific gene manipulation in vitro. RESULTS: Results indicated that GCC-Fe3O4 nanocarrier could have size down to less than 135 nm, which structure was highly stable and consistent over time. It also showed great transfection efficiency and low cytotoxicity in both serum and non-serum conditions. Our results demonstrated that GCC-Fe3O4 nanocarrier had exceeded 90% transfection efficiency, which was much better than common commercialized transfection reagents under same conditions. Such nanocarrier not only worked well in cell lines, but also ideal for gene delivery in primary cells. CONCLUSION: With high transfection efficiency and serum compatibility, this novel biocompatible cholesterol-based nanocarrier provides an ideal platform especially for RNAi-based gene manipulation. It also opens a wide range of biomedical applications for in vivo cell tracking and gene therapeutics for clinical usage.

Far-infrared ray radiation promotes neurite outgrowth of neuron-like PC12 cells through AKT1 signaling.

BACKGROUND/PURPOSE: Far-infrared (FIR) therapy is a safe and noninvasive source for medical applications. Animal study has shown the effects of FIR in promoting nerve repair. However, the cellular mechanism is not well known. Nerve growth factor (NGF) treated neuron-like PC12 cells for neurite outgrowth have been widely employed as the in vitro model for neural regeneration. METHODS: In this study, we tried to evaluate the potential of FIR in promoting neurite outgrowth and related mechanism by using NGF-treated neuron-like PC12 cells as a cellular model. We found that FIR could promote neurites outgrowth of neuron-like PC12 cells at earlier culture period. RESULTS: The neurite outgrowth-enhancing effect of FIR irradiation was more obvious when lower NGF concentration (1 ng/ml and 10 ng/ml) was added into the medium. We also found that FIR had no thermal effects on culture medium. The effects of FIR in promoting neurite outgrowth were dose dependent, and higher power density of FIR provided more effects for improving neurite outgrowth. The mechanism of FIR in promoting neurite outgrowth was through AKT1 pathway. CONCLUSION: The effects of FIR irradiation on promoting neurite outgrowth and neural regeneration of NGF-treated neuron-like PC12 cells are dose dependent and through activation of AKT1 phosphorylation. This study provided important information for understanding the cellular mechanism of FIR in promoting neurite outgrowth and possible neural regeneration for further clinical applications.

Curcumin inhibits TGF-ß1-induced connective tissue growth factor expression through the interruption of Smad2 signaling in human gingival fibroblasts.

BACKGROUND/PURPOSE: Many fibrotic processes are associated with an increased level of transforming growth factor-ß1 (TGF-ß1). TGF-ß1 can increase synthesis of matrix proteins and enhance secretion of protease inhibitors, resulting in matrix accumulation. Connective tissue growth factor (CTGF) is a downstream profibrotic effector of TGF-ß1 and is associated with the fibrosis in several human organs. Curcumin has been applied to reduce matrix accumulation in fibrotic diseases. This study was aimed to evaluate whether curcumin could suppress TGF-ß1-induced CTGF expression and its related signaling pathway involving in this inhibitory action in primary human gingival fibroblasts. METHODS: The differences in CTGF expression among three types of gingival overgrowth and normal gingival tissues were assessed by immunohistochemistry. Gingival fibroblast viability in cultured media with different concentrations of curcumin was studied by MTT assay. The effect of curcumin on TGF-ß1-induced CTGF expression in primary human gingival fibroblasts was examined by immunoblotting. Moreover, the proteins involved in TGF-ß1 signaling pathways including TGF-ß1 receptors and Smad2 were also analyzed by immunoblotting. RESULTS: CTGF was highly expressed in fibroblasts, epithelial cells and some of endothelial cells, smooth muscle cells, and inflammatory cells in phenytoin-induced gingival overgrowth tissues rather than in those of hereditary and inflammatory gingival overgrowth tissues. Moreover, CTGF expression in the epithelial and connective tissue layers was higher in phenytoin-induced gingival overgrowth tissues than in normal gingival tissues. Curcumin was nontoxic and could reduce TGF-ß1-induced CTGF expression by attenuating the phosphorylation and nuclear translocation of Smad2. CONCLUSION: Curcumin can suppress TGF-ß1-induced CTGF expression through the interruption of Smad2 signaling.

Citrus polyphenol for oral wound healing in oral ulcers and periodontal diseases.

BACKGROUND/PURPOSE: Various polyphenolic compounds from plants have been confirmed to have different pharmaceutical functions. The purpose of this study was to evaluate citrus polyphenol (CP) for dental applications. A medium with CP was developed to improve oral wound healing. The CP could be used as a supplemental compound in mouthwash for periodontal diseases. METHOD: In this study, the metabolic activity and cell toxicity of CP (1%, 0.1%, and 0.01%) for fibroblasts were investigated by MTT and lactate dehydrogenase assays (n = 6). The effect of CP on motility of fibroblast was also evaluated via a wound healing model. RESULTS: The growth of Hs68 cells on TCPS was greatly increased in the presence of 0.01% CP. In addition, the significant difference (p<0.01) of cell toxicity of fibroblast was observed after 6 days in 0.01% CP medium. Using the wound healing model, it was also found that CP could enhance the migratory ability of fibroblasts. CONCLUSION: The results confirm the feasibility of CP be a supplemental compound in mouthwash for treatment of periodontal diseases in dental application to improve wound healing in the mouth.

Inhibition of growth and migration of oral and cervical cancer cells by citrus polyphenol.

BACKGROUND/PURPOSE: It has been confirmed that polyphenolic compounds present in food have various pharmaceutical functions. The purpose of this study was to evaluate citrus polyphenol (CP) for dental applications. The culture medium with CP was developed to inhibit the proliferation of oral cancer cells. CP could be used as a supplemental compound for topical application for oral cancer patients. METHODS: In this study, the metabolic activity and cell toxicity of CP (at concentrations of 1%, 0.1%, and 0.01%) for oral and cervical cancer cells were investigated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and lactate dehydrogenase assays (n = 6). Furthermore, the effects of CP on motilities of oral and cervical cancer cells were also evaluated using a scratch assay model. RESULTS: We found that the growth of Ca9-22 and HeLa cells on tissue culture polystyrene was greatly inhibited when 1% CP was added to the medium. In addition, significant differences (p < 0.01) in cytotoxicities of oral and cervical cancer cells were observed after 6 days in the culture medium to which 1% CP was added. Furthermore, using a scratch assay model to evaluate the migratory abilities of oral and cervical cancer cells, it was also found that CP could inhibit the migratory abilities of cancer cells. CONCLUSION: The results confirmed the feasibility of the topical application of CP as a supplemental compound for inhibition of cancer cell proliferation and migration.

Novel microinjector for carrying bone substitutes for bone regeneration in periodontal diseases.

BACKGROUND/PURPOSE: Traditionally, guide bone regeneration (GBR) was a widely used method for repairing bone lost from periodontal disease. There were some disadvantages associated with the GBR method, such as the need for a stable barrier membrane and a new creative cavity during the surgical process. To address these disadvantages, the purpose of this study was to evaluate a novel microinjector developed for dental applications. The microinjector was designed to carry bone graft substitutes to restore bone defects for bone regeneration in periodontal diseases. The device would be used to replace the GBR method. METHODS: In this study, the injected force and ejected volume of substitutes (including air, water, and ethanol) were defined by Hooke's law (n = 3). The optimal particle size of bone graft substitutes was determined by measuring the recycle ratio of bone graft substitutes from the microinjector (n = 3). Furthermore, a novel agarose gel model was used to evaluate the feasibility of the microinjector. RESULTS: The current study found that the injected force was less than 0.4 N for obtaining the ejected volume of approximately 2 mL, and when the particle size of tricalcium phosphate (TCP) was smaller than 0.5 mm, 80% TCP could be ejected from the microinjector. Furthermore, by using an agarose model to simulate the periodontal soft tissue, it was also found that bone graft substitutes could be easily injected into the gel. CONCLUSION: The results confirmed the feasibility of this novel microinjector for dental applications to carry bone graft substitutes for the restoration of bone defects of periodontal disease.

Glycoprotein B7-H3 overexpression and aberrant glycosylation in oral cancer and immune response.

The incidence and mortality rate of oral cancer continue to rise, partly due to the lack of effective early diagnosis and increasing environmental exposure to cancer-causing agents. To identify new markers for oral cancer, we used a sialylation probe to investigate the glycoproteins differentially expressed on oral cancer cells. Of the glycoproteins identified, B7 Homolog 3 (B7-H3) was significantly overexpressed in oral squamous cell carcinoma (OSCC), and its overexpression correlated with larger tumor size, advanced clinical stage, and low survival rate in OSCC patients. In addition, knockdown of B7-H3 suppressed tumor cell proliferation, and restoration of B7-H3 expression enhanced tumor growth. It was also found that the N-glycans of B7-H3 from Ca9-22 oral cancer cells contain the terminal α-galactose and are more diverse with higher fucosylation and better interaction with DC-SIGN [DC-specific intercellular adhesion molecule-3 (ICAM-3)-grabbing nonintegrin] and Langerin on immune cells than that from normal cells, suggesting that the glycans on B7-H3 may also play an important role in the disease.

Imaging Endogenous Bilirubins with Two-Photon Fluorescence of Bilirubin Dimers.

On the basis of an infrared femtosecond Cr:forsterite laser, we developed a semiquantitative method to analyze the microscopic distribution of bilirubins. Using 1230 nm femtosecond pulses, we selectively excited the two-photon red fluorescence of bilirubin dimers around 660 nm. Autofluorescences from other endogenous fluorophores were greatly suppressed. Using this distinct fluorescence measure, we found that poorly differentiated hepatocellular carcinoma (HCC) tissues on average showed 3.7 times lower concentration of bilirubins than the corresponding nontumor parts. The corresponding fluorescence lifetime measurements indicated that HCC tissues exhibited a longer lifetime (500 ps) than that of nontumor parts (300 ps). Similarly, oral cancer cell lines had longer lifetimes (>330 ps) than those of nontumor ones (250 ps). We anticipate the developed methods of bilirubin molecular imaging to be useful in diagnosing cancers or studying the dynamics of bilirubin metabolisms in live cells.

Microarray analysis of gene expression of bone marrow stem cells cocultured with salivary acinar cells.

BACKGROUND/PURPOSE: Our previous work has demonstrated that rat bone marrow stem cells (BMSCs) can transdifferentiate into α-amylase-producing cells after coculture with rat submandibular gland acinar cells. These transdifferentiated cells may be used for regeneration of damaged salivary gland. The purpose of this study was to investigate the global gene expression of rat BMSCs cocultured with rat submandibular gland acinar cells and the factors inducing this transdifferentiation. METHODS: Rat BMSCs were indirectly cocultured with rat submandibular gland acinar cells by using the double chamber system for 5 and 10 days. The global gene expression of BMSCs during transdifferentiation into acinar cells was investigated by microarray analysis. RESULTS: A total of 45,018 probes were used and 41,012 genes were detected. After coculture for 5 days, 1409 genes were upregulated more than twofold and 1417 genes were downregulated more than twofold (p<0.005). Moreover, after coculture for 10 days, 1356 genes were upregulated more than twofold and 1231 genes were downregulated more than twofold (p<0.005). Bone morphogenetic protein (BMP)-6 was one of the top-ranked upregulated genes. The hub genes were interleukin-6 and CCAAT/enhancer-binding protein ß (CEBPB) in the early and late response gene groups, respectively. CONCLUSION: This is believed to be the first study on the global gene expression of rat BMSCs cocultured with rat acinar cells. Many genes related to the function of salivary acinar cells such as those responsible for the production of α-amylase protein were upregulated and many genes related to the differentiation of BMSCs into adipocytes and osteoblasts were downregulated. In addition, BMP-6 gene was found to be highly upregulated. We proposed that three target genes, BMP-6, interleukin-6 and CEBPB, play important roles in the transdifferentiation of BMSCs into acinar cells, and are worthy of further investigation.

Low pressure radio-frequency oxygen plasma induced oxidation of titanium--surface characteristics and biological effects.

OBJECTIVE: This research was designed to investigate the effects of low pressure radio-frequency (RF) oxygen plasma treatment (OPT) on the surface of commercially pure titanium (CP-Ti) and Ti6Al4V. Surface topography, elemental composition, water contact angle, cell viability, and cell morphology were surveyed to evaluate the biocompatibility of titanium samples with different lengths of OP treating time. MATERIALS AND METHODS: CP-Ti and Ti6Al4V discs were both classified into 4 groups: untreated, treated with OP generated by using oxygen (99.98%) for 5, 10, and 30 min, respectively. After OPT on CP-Ti and Ti6Al4V samples, scanning probe microscopy, X-ray photoelectron spectrometry (XPS), and contact angle tests were conducted to determine the surface topography, elemental composition and hydrophilicity, respectively. The change of surface morphology was further studied using sputtered titanium on silicon wafers. 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay and F-actin immunofluorescence stain were performed to investigate the viability and spreading behavior of cultivated MG-63 cells on the samples. RESULTS: The surface roughness was most prominent after 5 min OPT in both CP-Ti and Ti6Al4V, and the surface morphology of sputtered Ti sharpened after the 5 min treatment. From the XPS results, the intensity of Ti(°), Ti(2+), and Ti(3+) of the samples' surface decreased indicating the oxidation of titanium after OPT. The water contact angles of both CP-Ti and Ti6Al4V were increased after 5 min OPT. The results of MTT assay demonstrated MG-63 cells proliferated best on the 5 min OP treated titanium sample. The F-actin immunofluorescence stain revealed the cultivated cell number of 5 min treated CP-Ti/Ti6Al4V was greater than other groups and most of the cultivated cells were spindle-shaped. CONCLUSIONS: Low pressure RF oxygen plasma modified both the composition and the morphology of titanium samples' surface. The CP-Ti/Ti6Al4V treated with 5 min OPT displayed the roughest surface, sharpest surface profile and best biocompatibility.

Biphenyl liquid crystalline epoxy resin as a low-shrinkage resin-based dental restorative nanocomposite.

Low-shrinkage resin-based photocurable liquid crystalline epoxy nanocomposite has been investigated with regard to its application as a dental restoration material. The nanocomposite consists of an organic matrix and an inorganic reinforcing filler. The organic matrix is made of liquid crystalline biphenyl epoxy resin (BP), an epoxy resin consisting of cyclohexylmethyl-3,4-epoxycyclohexanecarboxylate (ECH), the photoinitiator 4-octylphenyl phenyliodonium hexafluoroantimonate and the photosensitizer champhorquinone. The inorganic filler is silica nanoparticles (∼70-100 nm). The nanoparticles were modified by an epoxy silane of γ-glycidoxypropyltrimethoxysilane to be compatible with the organic matrix and to chemically bond with the organic matrix after photo curing. By incorporating the BP liquid crystalline (LC) epoxy resin into conventional ECH epoxy resin, the nanocomposite has improved hardness, flexural modulus, water absorption and coefficient of thermal expansion. Although the incorporation of silica filler may dilute the reinforcing effect of crystalline BP, a high silica filler content (∼42 vol.%) was found to increase the physical and chemical properties of the nanocomposite due to the formation of unique microstructures. The microstructure of nanoparticle embedded layers was observed in the nanocomposite using scanning and transmission electron microscopy. This unique microstructure indicates that the crystalline BP and nanoparticles support each other and result in outstanding mechanical properties. The crystalline BP in the LC epoxy resin-based nanocomposite was partially melted during exothermic photopolymerization, and the resin expanded via an order-to-disorder transition. Thus, the post-gelation shrinkage of the LC epoxy resin-based nanocomposite is greatly reduced, ∼50.6% less than in commercialized methacrylate resin-based composites. This LC epoxy nanocomposite demonstrates good physical and chemical properties and good biocompatibility, comparable to commercialized composites. The results indicate that this novel LC nanocomposite is worthy of development and has potential for further applications in clinical dentistry.

Bone marrow combined with dental bud cells promotes tooth regeneration in miniature pig model.

Growth factors and morphogens secreted by bone marrow mesenchymal stem cells (BMSCs) of bone marrow fluid may promote tooth regeneration. Accordingly, a tissue engineering approach was utilized to develop an economical strategy for obtaining the growth factors and morphogens from BMSCs. Unerupted second molar tooth buds harvested from miniature pigs were cultured in vitro to obtain dental bud cells (DBCs). Bone marrow fluid, which contains BMSCs, was collected from the porcine mandible before operation. DBCs suspended in bone marrow fluid were seeded into a gelatin/chondoitin-6-sulfate/hyaluronan tri-copolymer scaffold (GCHT scaffold). The DBCs/bone marrow fluid/GCHT scaffold was autografted into the original alveolar sockets of the pigs. Radiographic and histological examinations were applied to identify the structure of regenerated tooth at 40 weeks postimplantation. The present results showed that one pig developed a complete tooth with crown, root, pulp, enamel, dentin, odontoblast, cementum, blood vessel, and periodontal ligament in indiscriminate shape. Three animals had an unerupted tooth that expressed dentin matrix protein-1, vascular endothelial growth factor, and osteopontin; and two other pigs also had dental-like structure with dentin tubules. This study reveals that DBCs adding bone marrow fluid and a suitable scaffold can promote the tooth regeneration in autogenic cell transplantation.

Interactive effects of mechanical stretching and extracellular matrix proteins on initiating osteogenic differentiation of human mesenchymal stem cells.

Human mesenchymal stem cells (hMSCs) are characterized by their abilities to differentiate into different lineages, including osteoblasts. Besides soluble factors, mechanical strain and extracellular matrix (ECM) proteins play important roles in osteogenic differentiation of hMSCs. However, interactions between them are still not fully understood. The purpose of this study was to investigate the combined effects of insoluble chemical and mechanical factors (ECM proteins vs. cyclic stretching) in driving hMSCs into osteogenic differentiation. To avoid the influence from osteogenic supplements, hMSCs were cultured in regular medium and subjected to cyclic mechanical stretching using a Flexcell Tension system (3% elongation at 0.1 Hz) when they were grown on substrates coated with various ECM proteins (collagen I (Col I), vitronectin (VN), fibronectin (FN), and laminin (LN)). Using alkaline phosphatase (ALP) activity and mineralized matrix deposition as respective indicators of the early and late stages of osteogenesis, we report herein that all of the ECM proteins tested supported hMSC differentiation into osteogenic phenotypes in the absence of osteogenic supplements. Moreover, cyclic mechanical stretching activated the phosphorylation of focal adhesion kinase (FAK), upregulated the transcription and phosphorylation of core-binding factor alpha-1 (Cbfa1), and subsequently increased ALP activity and mineralized matrix deposition. Among the ECM proteins tested, FN and LN exhibited greater effects of supporting stretching-induced osteogenic differentiation than did Col I and VN. The ability of ECM proteins and mechanical stretching to regulate osteogenesis in hMSCs can be exploited in bone tissue engineering via approximate matrix design or application of mechanical stimulation.

Effects of cyclic mechanical stretching on the mRNA expression of tendon/ligament-related and osteoblast-specific genes in human mesenchymal stem cells.

The purpose of this study was to explore the influences of cyclic mechanical stretching on the mRNA expressions of tendon/ligament-related and osteoblast-specific marker genes in human MSCs seeded onto a collagen type I-coated surface. The stretch-induced mRNA expressions of mesenchymal stem cell protein (MSCP), matrix metalloproteinase-3 (MMP-3), and marker genes related to tendon/ligament cells (type I collagen, type III collagen, and tenascin-C) and those typical of osteoblasts (core binding factor alpha 1 (Cbfa1), alkaline phosphatase (ALP), and osteocalcin (OCN)) were analyzed by quantitative real-time PCR. The results revealed significant downregulation of MSCP and upregulation of MMP-3 genes in MSCs subjected to mechanical loading, regardless of the magnitude of the stretching (high or low). Moreover, the typical marker genes of the osteoblast lineage were upregulated by low-magnitude stretching, whereas tendon/ligament-related genes were upregulated by high-magnitude stretching for a long period. Cbfa1 and ALP were upregulated starting as early at 8 hr, followed by a downward trend and no significant change in expression at the other time points. The mRNA expressions of type I collagen, type III collagen, and tenascin-C significantly increased in MSCs subjected to 10% stretching for 48 hr, and this effect still existed after the stretched cells had rested for 48 hr. This study demonstrated the effect of cyclic mechanical stretching on differential transcription of marker genes related to different cell lineages. Low-magnitude stretching increased mRNA expressions of Cbfa1 and ALP and was possibly involved in the early osteoblastic differentiation of MSCs, whereas high-magnitude stretching upregulated the mRNA expressions of tendon/ligament-related genes.

Regeneration of dentin-pulp complex with cementum and periodontal ligament formation using dental bud cells in gelatin-chondroitin-hyaluronan tri-copolymer scaffold in swine.

The purpose of this study is to use a tissue engineering approach for tooth regeneration. The swine dental bud cells (DBCs) were isolated from the developing mandibular teeth, expanded in vitro, and cultured onto cylinder scaffold gelatin-chrondroitin-hyaluronan-tri-copolymer (GCHT). After culturing in vitro, the DBCs/GCHT scaffold was autografted back into the original alveolar socket. Hematoxylin and eosin (H&E) staining combined with immunohistochemical staining were applied for identification of regenerated tooth structure. After 36-week post-transplantation, tooth-like structures, including well-organized dentin-pulp complex, cementum, and periodontal ligament, were evident in situ in two of six experimental animals. The size of the tooth structure (1 x 0.5 x 0.5 cm(3) and 0.5 x 0.5 x 0.5 cm(3) size) appeared to be dictated by the size of the GCHT scaffold (1 x 1 x 1.5 cm(3)). The third swine was demonstrated with irregular dentin-bony like calcified tissue about 1 cm in diameter without organized tooth or periodontal ligament formation. The other three swine in the experimental group showed normal bone formation and no tooth regeneration in the transplantation sites. The successful rate of tooth regeneration from DBCs/GCHT scaffolds' was about 33.3%. In the control group, three swine's molar teeth buds were removed without DBCs/GCHT implantation, the other three swine received GCHT scaffold implants without DBCs. After evaluation, no regenerated tooth was found in the transplantation site of the control group. The current results using DBSs/GCHT scaffold autotransplantation suggest a technical breakthrough for tooth regeneration.