High-Density Dermal Matrix for Soft Tissue Augmentation Using a Matrix Tissue Graph Technique-A Comprehensive Multicenter Analysis of 20 Implants: A 1-Year Follow-Up Retrospective Study.

Background: In this multicenter case series analysis, the authors present successful instances of 20 single-screw-retained and implant-supported prosthetic rehabilitation samples. Methods: A high-density heterologous dermal matrix (Derma® Osteobiol by Tecnoss, Torino, Italy) was employed with a specific technique named the matrix tissue graft (MTG) in all these cases characterized by an inadequate initial supra-crestal tissue height (thin if 1 mm or medium if 2 mm) to enhance the peri-implant soft tissues both vertically and horizontally. Results: The implants were deemed successful in all cases, yielding a success proportion of 100% (one-sided 97.5% confidence interval = 83.2-100%). The buccal and lingual gains were, respectively, 2.2 ± 0.38 mm (range 1.7-3.22 mm) and 0.83 ± 0.33 mm (range 0.1-1.5 mm). These measurements were calculated as the maximum distance between two superimposed .stl file models (derived from two different IOS devices) scanned before implant placement and 1 year after dermal matrix healing. Conclusions: An outstanding vertical and horizontal gain was obtained using this heterologous derma matrix placed above the bone crest and surrounding the dental implants.

Combining antibiotic-loaded bone cement-based free vastus lateralis muscle-sparing flap with split-thickness skin grafts: A reliable strategy for reconstructing diabetic foot ulcers at non-weight-bearing areas.

Diabetic foot ulcers (DFUs) present significant challenges due to their associated amputation rates, mortality, treatment complexity and excessive costs. Our earlier work introduced a wound surgical integrated treatment (WSIT) for DFUs, yielding promising outcomes. This study focuses on a specific WSIT protocol employing antibiotic-loaded bone cement (ALBC) in the first Stage, and free vastus lateralis muscle-sparing (VLMS) flaps and split-thickness skin grafts (STSGs) in the second stage to repair non-weight-bearing DFUs. From July 2021 to July 2023, seven DFU patients (aged 47-71 years) underwent this treatment. Demographic data, hospital stay and repair surgery times were collected. Histological and immunohistochemical analyses assessed angiogenesis, collagen deposition and inflammation. SF-36 questionnaire measured pre- and postoperative quality of life. Preoperative ultrasound Doppler showed that the peak blood flow velocity of the recipient area artery was significantly >30 cm/s (38.6 ± 6.8 cm/s) in all patients. Muscle flap sizes varied from 8 × 3.5 × 1 to 18 × 6 × 2 cm. The operation time of the repair surgery was 156.9 ± 15.08 minutes, and the hospital stay was 18.9 ± 3.3 days. Histological analysis proved that covering DFUs with ALBC induced membrane formation and increased collagen, neovascularization and M2 macrophages fraction while reducing M1 macrophages one. All grafts survived without amputation during a 7- to 24-month follow-up, during which SF-36 scores significantly improved. A combination of ALBC with free VLMS flaps and STSGs proved to be safe and effective for reconstructing non-weight-bearing DFUs. It rapidly controlled infection, enhanced life quality and foot function, and reduced hospitalization time. We advocate integrating this strategy into DFU treatment plans.

Exploring the potential of calcium-based biomaterials for bone regeneration in dentistry: a systematic review.

INTRODUCTION: Regenerative medicine emerged as a promising strategy for addressing bone defects, with several bone grafts currently being used, including autografts, allografts, xenografts and alloplasts. Calcium-based biomaterials (CaXs), a well-known class of synthetic materials, have demonstrated good biological properties and are being investigated for their potential to facilitate bone regeneration. This systematic review evaluates the current clinical applications of CaXs in dentistry for bone regeneration. EVIDENCE ACQUISITION: A comprehensive search was conducted to collect information about CaXs and their applications in the dental field over the last ten years. The search was limited to relevant articles published in peer-reviewed journals. EVIDENCE SYNTHESIS: A total of 72 articles were included in this scoping review, with eight studies related to periodontology, 63 in implantology and three in maxillofacial surgery respectively. The findings suggest that CaXs hold promise as an alternative intervention for minor bone regeneration in dentistry. CONCLUSIONS: Calcium-based biomaterials have shown potential as a viable option for bone regeneration in dentistry. Further research is warranted to fully understand their efficacy and safety in larger bone defects. CaXs represent an exciting avenue for researchers and clinicians to explore in their ongoing efforts to advance regenerative medicine.

Accuracy of Computer-Guided Implantology with Pilot Drill Surgical Guide: Retrospective 3D Radiologic Investigation in Partially Edentulous Patients.

Background and Objectives: Implant placement with static navigation enables the reaching of a correct position of implants from an anatomical and prosthetic point of view. Different approaches of static navigation are described in the scientific literature, and the pilot-guided approach is one of the least investigated. The aim of the present study is the evaluation of the accuracy of implant insertion using a pilot drill template. Materials and Methods: Fifteen partially edentulous patients, requiring an implant rehabilitation of at least one implant, were enrolled. Pre- and post-operative low-dose CTs were acquired to measure the differences between final positions of implants and virtually planned ones. Three linear discrepancies (coronal, apical, and depth), two angular ones (bucco-lingual and mesio-distal), and the imprecision area were evaluated. Correlations between accuracy and rehabilitated jaws, sectors, and implant length and diameters were also analyzed. Results: Forty implants were inserted in fifteen patients using pilot drill templates. Mean coronal deviation was 1.08 mm, mean apical deviation was 1.77 mm, mean depth deviation was -0.48 mm, mean bucco-lingual angular deviation was 4.75°, and mean mesio-distal one was 5.22°. The accuracy was statistically influenced only by the rehabilitated jaw for coronal discrepancy and sectors and implant diameter for bucco-lingual angular deviations. Conclusions: The pilot drill template could represent a predictable solution to obtain a correct implant placement. Nonetheless, a safety margin of at least 2 mm should be respected during implant planning to prevent damages to anatomical structures. Therefore, the tool is helpful in order to prosthetically drive the implants; still, great attention must be paid in fully relying on this procedure when approaching dangerous structures such as nerves and vessels.

Custom Bone Regeneration (CBR): An Alternative Method of Bone Augmentation-A Case Series Study.

We performed this clinical study in order to evaluate the reliability of the Guided Bone Regeneration (GBR) surgical technique through the use of customized CAD CAM titanium meshes (Yxoss CBR® Reoss) in order to show an alternative method of bone augmentation. MATERIALS AND METHODS: Nine patients presenting 10 bone defects were referred to solve oral dysfunction due to edentulous atrophic ridges. Guided bone regeneration was performed with titanium meshes combined with autogenous bone grafting and heterologous bovine bone mineral grafting, and exclusively a "poncho technique" soft tissue approach for all the cases. After a mean 9 months of graft healing (range 6-12 months), titanium meshes were removed, and implant surgery was subsequently performed. The results we obtained were positive in terms of volumetric increases in height, length and thickness of the atrophic ridges without biological complications detectable before implant surgery. RESULTS: Out of nine, one site met titanium mesh exposure: however, in all 10 sites a three-dimensional volumetric bone implementation was obtained. The statistical results were estimated by uploading and superimposing cbct scans before and after CBR surgery for each patient, so it was possible evaluate the maximum linear vertical and horizontal bone gain through dedicated Cad Cam software (Exocad GmbH®). The average horizontal gain was 6.37 ± 2.17 mm (range 2.78-9.12 mm) and vertical gain was 5.95 ± 2.06 mm (range 2.68-9.02 mm). A total of 18 implants were placed into the grafted sites with a 100% survival rate (clearly they are relative percentages to be compared to the short time elapsed). CONCLUSIONS: The results we obtained in this study suggest that this CBR procedure (Yxoss® by Reoss) is reliable and safe for bone regeneration to allow implant-prosthetic restoration in horizontal, vertical and combined bone defects. The soft tissue management is diriment: all the cases were managed with a "poncho" flap approach to decrease exposure complication.

Persistent Idiopathic Facial Pain (PIFP) in Patients Referred to a Multidisciplinary Centre in Italy: A Retrospective Observational Study.

BACKGROUND: Persistent Idiopathic Facial Pain (PIFP), previously named Atypical Facial Pain (AFP) is a poorly understood condition, often diagnosed after several inconclusive investigations. The aim of this retrospective study was to evaluate the demographic and clinical characteristics of patients with PIFP referred to a Facial Pain Center. METHODS: Between May 2011 and September 2014, data on 41 PIFP patients were analyzed regarding temporal, topographical and descriptive pain features, including onset, localization, pain descriptors and intensity. Pharmacological pain treatments were also registered. Finally, the presence and type of previous minor oro-surgery procedures in the painful area were investigated. RESULTS: Demographic and clinical characterization were similar to PIFP patients reported in literature. The presence of previous minor oro-surgery procedures in the painful area was reported in most of these patients, in particular endodontic treatments and tooth extractions. CONCLUSIONS: This retrospective analysis showed a high prevalence of minor oro-surgery procedures in our population, while its role in PIFP pathophysiology remains unknown. A new classification of PIFP built around the main discriminant factor of presence of these procedures in the painful area could be considered while available data were still insufficient to define specific diagnostic criteria.

Digital Customized Titanium Mesh for Bone Regeneration of Vertical, Horizontal and Combined Defects: A Case Series.

Background and Objective: Guided bone regeneration allows new bone formation in anatomical sites showing defects preventing implant rehabilitation. Material and Methods: The present case series reported the outcomes of five patients treated with customized titanium meshes manufactured with a digital workflow for achieving bone regeneration at future implant sites. A significant gain in both width and thickness was achieved for all patients. Results: From a radiographic point of view (CBTC), satisfactory results were reached both in horizontal and vertical defects. An average horizontal gain of 3.6 ± 0.8 mm and a vertical gain of 5.2 ± 1.1 mm. Conclusions: The findings from this study suggest that customized titanium meshes represent a valid method to pursue guided bone regeneration in horizontal, vertical or combined defects. Particular attention must be paid by the surgeon in the packaging of the flap according to a correct method called the "poncho" technique in order to reduce the most frequent complication that is the exposure of the mesh even if a partial exposure of one mesh does not compromise the final outcome of both the reconstruction and the healing of the implants.

Short-term "in vivo" study on cellular DNA damage induced by acrylic Andresen activator in oral mucosa cells.

OBJECTIVES: To analyse through comet assay and micronucleus test the viability and DNA damage occurred in buccal mucosa epithelial cells after a short-term exposure to Andresen activator resin monomers. SETTING AND SAMPLE POPULATION: Test group consisting of 26 subjects was treated with Andresen activator; 16 subjects who had never undergone orthodontic treatment were enrolled in the control group. MATERIAL & METHODS: Buccal mucosa samples were collected before treatment and after 7, 15, 30, 60 and 90 days. The analyses performed on the cells included the following: cellular viability, comet assay and micronucleus test. Mean ± SD were calculated for cellular viability, tail moment, tail intensity, tail length, micronuclei, binuclear and bud cells. Significance (P < 0.05) was evaluated with Dunnett's test. RESULTS: Cellular viability did not change during observational time, and its trend was similar to the controls. Tail moment and tail intensity significantly increased after 30 and 60 days, respectively, whereas tail length remained unchanged over time in the test group; the same parameters did not change in the control group. In the test group, micronuclei, binuclear and bud cells significantly increased after 30, 60 and 90 days, respectively. CONCLUSION: The resin monomers of the Andresen activator cause genotoxic effects detectable through comet assay and micronucleus test, but they do not produce clear cytotoxic effects after a 90 days exposure.

Clinical Success of Dental Implants Placed in Posterior Mandible Augmented With Interpositional Block Graft: 3-Year Results From a Prospective Cohort Clinical Study.

PURPOSE: The purpose of the present cohort study was to investigate the 3-year efficacy and clinical performance of implant-supported rehabilitations in posterior mandibles augmented with the sandwich osteotomy technique. MATERIALS AND METHODS: Twenty-three partially edentulous patients who developed atrophy of the posterior mandible (residual ridge height, 3 to 7 mm) were treated (32 surgical sites) with vertical bone augmentation using interpositional equine cancellous bone blocks and porcine corticocancellous bone particulate. All implants were placed 4 months after augmentation and were loaded with fixed dental prostheses. One side per patient was selected and followed for 3 years, and the patient was the unit of analysis. Linear radiographic vertical bone gain and peri-implant marginal bone loss were assessed; secondary outcomes-complication rates after surgery, prosthesis and implant failure rates, width of keratinized mucosa, and patient satisfaction-were evaluated. RESULTS: All patients reported postoperative paresthesia that resolved over a period of 2 months after the augmentation procedure. The mean vertical bone gain was 5.6 mm after 4 months. Ninety-one dental implants were positioned into the augmented areas. The global 3-year survival rate was 95.5%. The mean peri-implant marginal bone loss around implants was 1.06 ± 0.37 mm 3 years after loading, whereas the width of keratinized mucosa had an overall increase of 0.39 ± 0.36 mm. CONCLUSION: The results of the present 3-year study suggested high success rates for implants placed in areas augmented with the osteotomy sandwich technique. This surgical approach could be helpful in the presence of a low residual vertical height in the posterior mandible before implant placement.

Syndromes associated with dental agenesis.

INTRODUCTION: Dental agenesis is the congenital absence of a variable number of teeth due to the lack of formation of the corresponding tooth germ. The aim of this work was to investigate the syndromic conditions characterized by dental agenesis. EVIDENCE ACQUISITION: Based on the research conducted through the OMIM® (Online Mendelian Inheritance in Man) and PubMed online databases, more than ninety syndromes associated with severe or moderate agenesis have been found. EVIDENCE SYNTHESIS: The main clinical features of these syndromes are described, especially those concerning the stomatognathic apparatus, referring to the most recent literature. Among these syndromes there are three clinical conditions associated with dental agenesis that are common for the clinician: Down Syndrome, ectodermal dysplasia and labio-palatal cleft. CONCLUSIONS: It must be kept in mind that the success of the treatment of these patients is based on the compliance of the patient as well as on the collaboration among specialists.

Variations of the profile of the nose of the upper lip.

BACKGROUND: The aim of this study is to analyze the path needed to achieve a good aesthetic and functional result in patients treated with orthognathic surgery. METHODS: Seventy-three patients with only III class malocclusion were treated with sagittal split ramus osteotomy and with Le Fort I in only one piece. Through the analysis of anatomical cephalometric tracings, changes in the skeletal base, upper incisor and nose's shape were evaluated. The statistical analysis measurements were calculated for each length and for each angle at T0 (preoperative value) and at T1 (postoperative value). RESULTS: A significant statistical correlation was found mainly between forward movement of the upper maxilla and the outline of the nose, the nasal projection, and the naso-labial angle (NLA). The upper incisor in movements of verticality and inclination did not show any significant correlations with modifications of the NLA. CONCLUSIONS: A significant correlation can be seen between the forward movements of the upper maxilla with the outline of the nose, the nasal projection and the Naso-Labial Angle.

Alveolar splitting with Piezosurgery®, bone bank grafts and NobelActive implants as an alternative to major bone grafting for maxillary reconstruction.

BACKGROUND: Piezosurgery® represents a novel alternative technique. The Piezosurgery® is well tolerated and permits a large number of applications in described literature. The principle of Piezosurgery® consists into inducing micro-vibrations to a metallic insert with a particular custom. The aim of this article is to study and to evaluate the use of NobelActive implants in combination with piezosurgical split-crest technique in severe atrophy of the upper maxilla. This approach allows avoiding the use of onlay grafts, due to rise the trasversal width of the crestal bone, which could have more complications and uncertain prognosis. This technique allows reducing timing of implant insertion because it is not necessary to wait for the graft to heal. METHODS: Ten patients (age 45-58) are selected, presenting from class 4 to 5 by Cawood and Howell of jaws. Those underwent piezosurgical split-crest technique and simultaneous implants surgery and bone grafts. Preoperative X-ray evaluation included standard X-panoramic and CT Dental-scan. Standard chemoprophylaxis was administered to each patient. The piezosurgical split-crest procedure was combined with tissue bank fresh frozen chips and double-layer collagen membrane to improve the thickness of alveolar bone and simultaneous implant surgery. Every patient received simultaneously from 3 to 6 implants which diameter was 4.3 mm and length 10-11.5 mm. Healing abutments have been applied at 5 months from the first procedure. RESULTS: Patients were clinically monitored, and marginal bone changes were calculated using periapical radiographs, which were taken with O-ring technique at placement and upon subsequent appointments and a 1-mm measurement grid for marginal bone remodeling, again at baseline and thereafter 3 months within loading. Cumulative implant survival was 97.8% (N.=45). Mean marginal bone resorption (SD) was 1.19 (1.01) mm for the early loading group after 1 year. The use of NobelActive implants seem to reduce peak stress in both cortical and trabecular bone. CONCLUSIONS: The use of NobelActive implants was revealed ideal in patients presenting jaw atrophy. The tapered designs show an ability to dissipate the interfacial stresses of bone, therefore improving the stability and the osteointegration if used in association to split crest made with piezosurgical device.

Odontogenic Orofacial Infections.

Acute dental abscess is a frequent and sometimes underestimated disease of the oral cavity. The acute dental abscess usually occurs secondary to caries, trauma, or failed endodontic treatment. After the intact pulp chamber is opened, colonization of the root canals takes place with a variable set of anaerobic bacteria, which colonize the walls of the necrotic root canals forming a specialized mixed anaerobic biofilm. Asymptomatic necrosis is common. However, abscess formation occurs when these bacteria and their toxic products breach into the periapical tissues through the apical foramen and induce acute inflammation and pus formation. The main signs and symptoms of the acute dental abscess (often referred to as a periapical abscess or infection) are pain, swelling, erythema, and suppuration usually localized to the affected tooth, even if the abscess can eventually spread causing a severe odontogenic infection which is characterized by local and systemic involvement culminating in sepsis syndrome. The vast majority of dental abscesses respond to antibiotic treatment, however, in some patients surgical management of the infection may be indicated. In the present work, a retrospective analysis of the patients with dental orofacial infections referred to the Unit of Dentistry and Maxillofacial Surgery of the University of Verona from 1991 to 2011 has been performed.

Rehabilitation of a complex midfacial defect by means of a zygoma-implant-supported prosthesis and nasal epithesis: a novel technique.

PURPOSE: Several authors have described zygoma implants as a reliable surgical option to rehabilitate severe maxillary defects in case of extreme atrophy or oncological resections. The aim of this study is to report a new technical approach to the rehabilitation of a complex oronasal defect by means of a zygoma-implant-supported full-arch dental prosthesis combined with a nasal epithesis. PATIENTS AND METHODS: The patient presented with a subtotal bilateral maxillectomy and total rhinectomy defect because of a squamous cell carcinoma of the nose. No reconstructive surgery was performed because of the high risk of recurrence; moreover, the patient refused any secondary procedure. After surgery, the patient presented a wide palatal defect associated to the absence of the nasal pyramid. Zygoma-retained prostheses are well documented, and they offer good anchorage in rehabilitating wide defects after oncological surgery and a good chance for patients to improve their quality of life. We hereby describe two prosthetic devices rehabilitating two iatrogenic defects by means of a single intraoral implant-supported bar extending throughout the oronasal communication, thus offering nasal epithesis anchorage. RESULTS: At 1-year follow-up after functional prosthetic loading, no implant failure has been reported. Clinical and radiological follow-up showed no sign of nasal infection or peri-implantitis. The patient reported a sensitive improvement of his quality of life. CONCLUSIONS: Simultaneous oral and nasal rehabilitation of complex oronasal defects with zygoma-implant-supported dental prosthesis and nasal epithesis represents a reliable surgical technique. According to this clinical report, the above-mentioned technique seems to be a valuable treatment option as it is safe, reliable and easy to handle for both surgeon and patient.

Relationship Between Primary Stability and Crestal Bone Loss of Implants Placed with High Insertion Torque: A 3-Year Prospective Study.

PURPOSE: Concerns have been expressed about the possibility of high insertion torque (IT) causing necrosis, impaired osseointegration, and crestal bone loss over time. The present study investigated the relationship between primary stability and implant success, including early and late maintenance of crestal bone levels. MATERIALS AND METHODS: Implants were placed in patients at three study centers. Every effort was made to achieve the highest possible primary stability, which was measured with IT and implant stability quotient (ISQ). The IT and ISQ at insertion and reopening (3 to 4 months), as well as bone levels at several points in time, were recorded. The correlations between IT, ISQ, and immediate and 3-year crestal bone loss were investigated through linear regression analyses. RESULTS: Average IT was 76.1 ± 20.8 Ncm, while the average ISQ score was 80.4 ± 8.4. The implant success rate at 36 months was 98.6%. The crestal bone loss around most implants (41.0%) ranged from 0.05 to 0.5 mm. None of the osseointegrated implants had crestal bone loss greater than 2.5 mm. The linear regression analysis showed no correlation among early or 3-year crestal bone loss and IT, ISQ at surgery, and ISQ at reopening. CONCLUSION: The implants studied avoided any negative effects deriving from the high IT values (≥ 50 Ncm) applied during 3 years of follow-up.

Extraordinary sneeze: Spontaneous transmaxillary-transnasal discharge of a migrated dental implant.

This case report describes an extraordinary case of the spontaneous transmaxillary-transnasal discharge of a dental implant, which occurred during a sneeze. The patient was complained of symptoms of acute sinusitis. She underwent a computed tomography scan that revealed a dental implant dislocated in the maxillary sinus. Medical treatment based on antibiotics and mucolytics was administered to the patient in order to prepare her for endoscopic endonasal surgery. The implant was spontaneously discharged two days after during a sneeze. Mucociliary clearance in combination with a local osteolytic inflammatory process and mucolytics therapy are the likely causes of this unusual discharge.

A New Radiologic Protocol and a New Occlusal Radiographic Index for Computer-Guided Implant Surgery.

A minimum interarch space of 40 mm along the planned direction of the implant is physically mandatory to allow computer-guided implant placement with the NobelGuide technique. The aim of this paper was to describe a novel radiologic protocol and a new occlusal radiographic index that give the clinician the possibility of identifying patients with limited interarch space. Three patients undergoing NobelGuide treatment of the edentulous upper jaw were selected as candidates for this study. In the first patient, the radiographic occlusal index was built using an addition silicone material to occupy the space between the 2 arches forced into the maximum opening position. In the other 2 patients different silicone materials were used and 2 interpositional wedges were placed in between 2 silicone bites to ensure maximum mouth opening. In the first patient, the bite made with addition silicone alone resulted in distinct noise on computer tomography since the patient was not forced to achieve his maximum opening position. In the second patient the mandibular addition silicone was still quite visible, while in the third patient the condensation silicone was invisible and the quality of the image was excellent with the possibility of measuring maximum opening position and virtually predicting interference with the opposite arch. The new radiological occlusal index made with condensation silicone (Sandwich Index) proved to be effective in reproducing the maxillary forced maximum opening position during the initial planning phase, preventing errors in the inclusion or exclusion of patients suitable for NobelGuide treatment.

Surgical Treatment of Oroantral Communications.

BACKGROUND: Oroantral communication (OAC) can be defined as a pathologic space created between the maxillary sinus and the oral cavity.This communication and subsequent formation of a chronic oroantral fistula is a common complication often encountered by oral and maxillofacial surgeons.Although various techniques have been proposed in published studies, long-term successful closure of oroantral fistulas is still one of the most difficult problems confronting the surgeon working in the oral and maxillofacial region.The decision of which treatment modality to use is influenced by many factors, such as the amount and condition of tissue available for repair, the size and location of the defect, the presence of infection, the time to the diagnosis of the fistula. OBJECTIVE: To evaluate an alternative technique for the treatment of oro-antral fistula, using a combined therapeutic ear nose and throat/intraoral approach. METHODS: Twelve consecutive patients affected by complicated OAC were included in this study.The protocol consisted of: clinical, endoscopic, and radiological preoperative evaluation (panoramic tomogram and computed tomography); systemic antibiotic and steroid therapy for 2 weeks before surgery; one-stage surgical procedure consisting of Functional Endoscopic Sinus Surgery technique associated with the closure of the OAC by a titanium mesh and a mucoperiosteal flap; postoperative antibiotic and cortisone-based therapy.A titanium mesh was used to obtain an optimal support and stabilization of soft tissues.Follow-up consisted of weekly clinical evaluation during the first month, a clinical evaluation at 1, 3, 6, 12, 24 months and a nasal endoscopy at 3, 8, 24 weeks after surgery. A second surgical step took place to remove the mesh, after a period of healing, which went from 6 to 18 months. Samples were harvested from the surgical site after mesh removal for histological analysis. RESULTS: At 1 month follow-up, in 10 patients of 12, the Valsalva manoeuvre was negative, same result at the 3rd month follow-up, although in 11 of 12 patients. In 5 of 12 patients, the mesh was exposed. The histological analysis confirmed the formation of a pseudo-periosteum layer.One patient failed because the mesh lost its stability. The patient was operated again 8 months later and new mesh was fixed into place. CONCLUSION: The current study showed that one-stage, combined endoscopic and intraoral approach represents a feasible and minimally invasive procedure for the long-term effective treatment of chronic complicated OACs.The main advantage of the use of a titanium mesh to guide the regeneration is that it assures a predictable healing, mechanic scaffold, tissues stability and allows a possible following oral rehabilitation.

Gene Expression of Human Mesenchymal Stem Cells Cultured on Titanium Dental Implant Surfaces.

OBJECTIVE: The study shows how the influence of titanium surfaces on human mesenchymal stem cells differentiates toward osteocytes lineage and how, after growth, on machined titanium disk or etched titanium disk, changes, in gene expression for RUNX1, CTNNB1, SP7, and DLX5. METHODS: Genes were analyzed by means of quantitative real-time polimerase chain reaction. Osseo genic lineage differentiation was also tested by means of the catenin-ß1 immunofluorescence, induced osteoblasts, which represented the internal control. RESULTS: The RUNX1 and SP7 expressions in the induced osteoblasts prove to be different, compared with cells cultured on metallic supports. Moreover, the levels of expression of the runt-related transcription factor 1 and the osterix appeared more down-regulated in cells that grew on a machined titanium surface. In the present experimental model, mRNA expression of DLX5 and CTNNB1 in human mesenchymal stem cells, cultured on each of the titanium surfaces, showed no differences, compared with osteoblast-induced cells. The immunofluorescence scores, for protein expression of beta-catenin in human mesenchymal stem cell treated cells, illustrates significantly improved results with the etched surface. CONCLUSIONS: Present results suggested that different titanium surfaces might induce some differences in terms of gene expression. The only gene analyzed, which proved significant differences between the 2 titanium supports, was SP7; however, the other 3 genes indicating the existence of differences between the 2 titanium groups.

A piezo surgery with corticotomies and implant placement as part of a multidisciplinary approach to treat malocclusion disorder in an adult patient: clinical report.

This clinical report illustrates a multidisciplinary approach for the rehabilitation of a young adult patient affected by a bilateral edentulous space and an anterior deep bite. The patient required orthodontics and surgical corticotomy and implantology (both performed with a piezo device). A multidisciplinary planning approach, including orthodontics, oral and periodontic surgery, and restorative dentistry, has an important role in the final outcome of treatment. In fact a dental class I occlusion has been established only on the right side. The left side could not be restored to an ideal class I relationship due to the pontic prosthesis. The original collapsed right posterior occlusion was corrected. A stable posterior occlusion was established, and the balancing interference was eliminated. Centric relation and centric occlusion were established at the same vertical dimension of occlusion. The cephalometric analysis and clinical aspect at the end of treatment showed that the patient had improvements in overbite and overjet.Multidisciplinary management, including endodontic and restorative dentistry, periodontics, corticotomy-assisted orthodontics, implants, and prosthetics, was used for a young female patient with multiple missing teeth, anterior deep bite, and a malocclusion with cant of the occlusal plane. The interaction of interdisciplinary specialties and careful treatment planning were required. The patient also benefited esthetically from our effort.