A portable smartphone detection of ctDNA using MnB2 nanozyme and paper-based analytical device.

The development of point-of-care testing (POCT) for circulating tumor DNA (ctDNA) is meaningful for the non-invasive cancers screening and diagnosis, particularly in resource-limited settings. The microfluidic paper-based analytical device (µPAD) provides an ideal platform, its application in ctDNA assays remains underexplored. In this work, a multifunctional µPAD was manufactured, which can enhance the efficiency and reduce the cost of ctDNA sensing. Additionally, a smartphone-based application analysis was fabricated for convenient, portable detection and colorimetric signal readout. Moreover, the novel oxidase-like MnB2 nanozyme was introduced in the sandwiches sensing strategy, utilizing its catalytic properties to effectively generate a colorimetric signal. The use of MnB2 nanozyme in sensing application is relatively novel, and its catalytic performance and mechanism was thoroughly evaluated via experiment and density functional theory (DFT) calculations. After optimizing the detection conditions, the proposed biosensor exhibited satisfactory results. Furthermore, the method was successfully used to detect ctDNA in tumor cell lysates and peripheral blood samples from tumor-bearing mice. The results were consistent with standard qPCR method, affirming the reliability of our POCT analysis device in ctDNA detection. Thus, this work not only provides a paper-based POCT device and intelligent analysis tool for portable cancers diagnosis, but it also paves a new application path for MnB2 nanozyme in the sensing filed.

Label-free fluorescent sensor for sensitive detection of ctDNA based on water stabilized CsPbBr3 nanosheet.

The detection of circulating tumor DNA (ctDNA), as a practical liquid biopsy technique, was of great significance for the study of cancer diagnosis and prognosis. However, reported methods for detection ctDNA still have some limitations, such as tedious process and high cost. In this study, CsPbBr3 nanosheet (CsPbBr3 NS) with high water stability was prepared by etching, and its fluorescence intensity could be stably stored for 1 year. The Ti3C2Tx possessed high quenching efficiency for CsPbBr3 NS and the HOMO-LUMO orbital study revealed that the PET mechanism was responsible for fluorescence quenching. And the Ti3C2Tx showed stronger affinity towards single-stranded DNA (ssDNA), as compared with double-stranded DNA (dsDNA). The probe ssDNA could be adsorbed on the surface of Ti3C2Tx through π-π stacking. After the targets were recognized by probe ssDNA to form dsDNA, its affinity with Ti3C2Tx decreased and the active site of Ti3C2Tx recovered, causing a high quenching efficiency on CsPbBr3 NS. Based on this, a label-free fluorescent biosensor was designed for the sensitive detection of ctDNA (EGFR 19 Dels for non-small cell lung cancer, NSCLC). Under the optimal experimental conditions, this biosensor exhibited a detection limit of 180 fM and a linear range of 50 pM-350 pM with amplification of magnetic beads through strand displacement reaction. In addition, this sensor was applied to the detection of ctDNA in serum samples and cells lysates. This method for ctDNA detection was expected to have great potential for biomarker detection in the field of liquid biopsy.

A label-free fluorescent sensor for rapid and sensitive detection of ctDNA based on fluorescent PDA nanoparticles.

Technological advances in the detection of circulating tumor DNA (ctDNA) have made new options available for diagnosis, classification, biological studies, and treatment selection. However, effective and practical methods for analyzing this emerging class of biomarkers are still lacking. In this work, a fluorescent biosensor was designed for the label-free detection of ctDNA (EGFR 19 del for non-small cell lung cancer, NSCLC). The biosensor was based on the fact that MnO2 nanosheets (MnO2 NSs) have stronger affinity towards single-stranded DNA (ssDNA), as compared with double-stranded DNA (dsDNA). As a high-performance nanoenzyme, MnO2 NSs could oxidize dopamine (DA) into fluorescent polydopamine nanoparticles (FL-PDA NPs), which could be used as a fluorescence signal. The probe ssDNA could be adsorbed on the surface of MnO2 NSs through π-π stacking, and the active site would be masked, causing a lower fluorescence. After the targets were recognized by probe ssDNA to form dsDNA, its affinity for MnO2 NSs decreased and the active site recovered, causing a restored fluorescence. It was verified that Mn ions, •OH radicals and electron transfer were the important factors in the catalytic oxidation of DA. Under the optimal experimental conditions, this biosensor exhibited a detection limit of 380 pM and a linear range of 25-125 nM, providing reliable readout in a short time (45 min). This sensor exhibited outstanding specificity, stability and reproducibility. In addition, this sensor was applied to the detection of ctDNA in serum samples and cell lysates. It is demonstrated that FL-PDA NPs can be used as a fluorescence signal for easy, rapid and label-free detection of ctDNA without any other amplification strategies, and the proposed strategy has great potential for biomarker detection in the field of liquid biopsy.

Conductive metal-organic framework based label-free electrochemical detection of circulating tumor DNA.

An ultrasensitive electrochemical biosensor was designed for the rapid label-free detection of circulating tumor DNA (ctDNA, EGFR 19 Dels for non-small cell lung cancer, NSCLC). We linked the highly conjugated tricatecholate, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) with Ni(II) ions into the two-dimensional porous conductive metal-organic frameworks (MOFs), which is termed Ni-catecholates (Ni-CAT). Then, the AuNPs/Ni-catecholates/carbon black/polarized pencil graphite electrode (AuNPs/Ni-CAT/CB/PPGE) was obtained by electrodeposition of AuNPs on the surface of PPGE modified with Ni-CAT/CB composite materials. The AuNPs/Ni-CAT/CB/PPGE were used for label-less detection of ctDNA, with a total detection time of only 30 min. Under optimal detection conditions, the AuNPs/Ni-CAT/CB/PPGE sensor exhibited excellent detection performance with good linear response to ctDNA over a wide concentration range and the detection limit down to the femtomolar level. The sensor was applied to the determination of ctDNA in serum samples with high sensitivity. This simple, efficient, and expeditious method has practical value in liquid biopsy of ctDNA and has potential for development in early detection, treatment, and prognosis of tumors. Herein, an ultrasensitive electrochemical biosensor was designed for the rapid label-free detection of ctDNA (EGFR 19 Dels for non-small cell lung cancer, NSCLC). We linked the highly conjugated tricatecholate, 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) with Ni(II) ions into the two-dimensional porous conductive metal-organic frameworks (MOFs), which is termed as Ni-catecholates (Ni-CAT). Then, the AuNPs/Ni-catecholates/carbon black/polarized pencil graphite electrode (AuNPs/Ni-CAT/CB/PPGE) was obtained by electrodeposition of AuNPs on the surface of PPGE modified with Ni-CAT/CB composite materials. The AuNPs/Ni-CAT/CB/PPGEs were used for label-less detection of ctDNA, with a total detection time of only 30 min. Under optimal detection conditions, the AuNPs/Ni-CAT/CB/PPGE sensor exhibited excellent detection performance with good linear response to ctDNA in the concentration range of 1 × 10-15 M to 1 × 10-6 M and with a detection limit as low as 0.32 fM. The sensor was applied for determination of ctDNA in serum samples and gave high sensitivity. This simple, efficient and expeditious method has practical value in liquid biopsy of ctDNA and has potential for development in early detection, treatment and prognosis of tumors.

Novel nitrogen-doped carbon dots for "turn-on" sensing of ATP based on aggregation induced emission enhancement effect.

In this work, a nitrogen-doped carbon dots (CDs) was successfully synthesized by hydrothermal synthesis of polyethylenimine (PEI) and citric acid. The as-prepared CDs suffered from aggregation-caused quenching (ACQ) with a high concentration, but after adding adenosine triphosphate (ATP), the CDs aggregated. The generation of aggregates caused the rotation of the surface groups on CDs and reduced the non-radiation decay. The QY of CDs in water was 9.25 %, and increased to 16.60 % and 63.38% in the addition of 100 and 1000 µM ATP. And then, the enhancement of the radiation rate led to the aggregation induced enhancement effect (AIEE). Moreover, we also found that the proportion of precursors for CDs synthesis was a key factor in the occurrence of AIEE. Therefore, such CDs would be excellent candidates as fluorescent probes for the label-free detection of ATP. Our proposed method exhibited simple and easy preparation of nanoprobe, quick response (3 min), wide range of linear rage (1-2000 µM) and eco-friendly. In addition, the method performed successfully as a "turn-on" sensor for detection of ATP in the tablet with a recovery of 100.1~106.9% and RSD below 3.5%.

An Ultrasensitive Electrochemical DNA Biosensor Based on Carboxylated Multi-walled Carbon Nanotube/Molybdenum Disulfide Composites for KRAS Gene Detection.

In this paper, an ultrasensitive electrochemical biosensor based on carboxylated multi-walled carbon nanotube/molybdenum disulfide composites (MWCNTs-COOH/MoS2) for the detection of KRAS gene is described. An easy, low-cost method, named one-step hydrothermal, was used for the synthesize of MWCNTs-COOH/MoS2 nanocomposites, and scanning electronic microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were used for characterizing the prepared composites. Furthermore, cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were employed for an electrochemical performance study of this biosensor. Under optimal conditions, the detection limit of target DNA achieved down to 3 fM (S/N = 3) with high sensitivity; the linear range with the logarithm of the concentrations of target DNA varied from 1.0 × 10-14 to 1.0 × 10-7 M. Finally, the practicality of our proposed sensor was verified by a determination of the KRAS gene in human serum samples with good accuracy and high precision due to the excellent conductivity and large active surface area of the MWCNTs-COOH/MoS2 nanocomposites. This proposed biosensor thus provides a practical method for the rapid and sensitive analysis of gene detection.

A sandwich-type electrochemical immunoassay for ultrasensitive detection of non-small cell lung cancer biomarker CYFRA21-1.

Many studies confirm that the aberrant expression of Cytokeratin 19 fragment 21-1 (CYFRA21-1) is highly correlated with non-small cell lung cancer (NSCLC), especially for squamous cell carcinoma. Herein, we report a sandwich-type electrochemical immunosensor based on signal amplification strategy of multiple nanocomposites to test CYFRA21-1 selectively and sensitively. The proposed immunosensor fabricated by three-dimensional graphene (3D-G), chitosan (CS) and glutaraldehyde (GA) composite on the glass carbon electrode (GCE) with a large surface area is prepared to immobilize primary antibodies (Ab1) and provide excellent conductivity. To further amplify the electrochemical signal, the trace tag on the foundation of gold nanoparticles (AuNPs) is coated with amino-functionalized carbon nanotube (MWCNT-NH2) nanocomposite through thionine linking, which provides more amino groups to capture more horseradish peroxidase-labeled antibodies (HPR-Ab2) and enhances the conductivity. Under optimal conditions, the developed immunosensor exhibits excellent analytical performance for the determination of CYFRA21-1 with a wide linear range from 0.1 to 150ng·mL-1 and a low detection limit (LOD) of 43pg·mL-1. Furthermore, satisfactory results are obtained for the determination of CYFRA21-1 in real clinical serum samples, indicating the potential of the immunoassay to be applied in clinical analysis.

A sensitive label-free electrochemical immunosensor for detection of cytokeratin 19 fragment antigen 21-1 based on 3D graphene with gold nanopaticle modified electrode.

Previous studies have confirmed that cytokeratin 19 fragment antigen 21-1 (CYFRA 21-1) serves as a powerful biomarker in non-small cell lung cancer (NSCLC). Herein, we report for the first time a label-free electrochemical immunosensor for sensitive and selective detection of tumor marker CYFRA21-1. In this work, three-dimensional graphene @ gold nanoparticles (3D-G@Au) nanocomposite was modified on the glassy carbon electrode (GCE) surface to enhance the conductivity of immunosensor. The anti-CYFRA21-1 captured and fixed on the modified GCE through the cross-linking of chitosan (CS), glutaraldehyde (GA) and anti-CYFRA21-1. The differential pulse voltammetry (DPV) peak current change due to the specific interaction between anti-CYFRA21-1 and CYFRA21-1 on the modified electrode surface was utilized to detect CYFRA21-1. Under optimized conditions, the proposed electrochemical immunosensor was employed to detect CYFRA21-1 and exhibited a wide linear range of 0.25-800ngmL-1 and low detection limit of 100pgmL-1 (S/N = 3). Moreover, the recovery rates of serum samples were in the range from 95.2% to 108.7% and the developed immunosensor also shows a good correlation (less than 6.6%) with enzyme-linked immunosorbent assay (ELISA) in the detection of clinical serum samples. Therefore, it is expected that the proposed immunosensor based on a 3D-G@Au has great potential in clinical medical diagnosis of CYFRA21-1.

An electrochemical DNA biosensor based on nitrogen-doped graphene/Au nanoparticles for human multidrug resistance gene detection.

Multidrug resistance (MDR) has become a major obstacle to the adequate treatment of cancer patients; thus, there is an urgent need for exploring new strategies for early diagnosis of MDR in clinic. Here, we report a novel electrochemical biosensor based on nitrogen-doped graphene nanosheets functionalized with Au nanoparticles (N-G/Au) for sensitive and selective DNA detection. The highly conductive nanocomposite layer was characterized by using scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. DNA with thiol groups at the 5' end was immobilized on the N-G/Au surface via the strong Au-S bond. Differential pulse voltammetry was applied to monitor the target DNA hybridization event using methylene blue as an electrochemical indicator. Under optimal conditions, the biosensor could detect target DNA down to 3.12×10(-15)M with a linear range from 1.0×10(-14) to 1.0×10(-7)M, showing high sensitivity. Further, the sensing strategy was successfully used for detecting MDR1 DNA in real clinical samples. These results will aid in developing a new portable detection system for MDR that will allow effective diagnosis in the early stages of related cancer.

A novel device based on a fluorescent cross-responsive sensor array for detecting lung cancer related volatile organic compounds.

In this paper, a novel, simple, rapid, and low-cost detection device for lung cancer related Volatile Organic Compounds (VOCs) was constructed. For this task, a sensor array based on cross-responsive mechanism was designed. A special gas chamber was made to insure sensor array exposed to VOCs sufficiently and evenly, and FLUENT software was used to simulate the performance of the gas chamber. The data collection and processing system was used to detect fluorescent changes of the sensor arrays before and after reaction, and to extract unique patterns of the tested VOCs. Four selected VOCs, p-xylene, styrene, isoprene, and hexanal, were detected by the proposed device. Unsupervised pattern recognition methods, hierarchical cluster analysis and principal component analysis, were used to analyze data. The results showed that the methods could 100% discriminate the four VOCs. What is more, combined with artificial neural network, the correct rate of quantitative detection was up to 100%, and the device obtained responses at concentrations below 50 ppb. In conclusion, the proposed detection device showed excellent selectivity and discrimination ability for the VOCs related to lung cancer. Furthermore, our preliminary study demonstrated that the proposed detection device has brilliant potential application for early clinical diagnosis of lung cancer.

Synthesis of superparamagnetic iron oxide nanoparticles coated with a DDNP-carboxyl derivative for in vitro magnetic resonance imaging of Alzheimer's disease.

Superparamagnetic iron oxide nanoparticles (SPIONs) have been proposed for use in magnetic resonance imaging as versatile ultra-sensitive nanoprobes for Alzheimer's disease imaging. In this work, we synthetized an efficient contrast agent of Alzheimer's disease using 1,1-dicyano-2-[6-(dimethylamino)naphthalene-2-yl]propene (DDNP) carboxyl derivative to functionalize the surface of SPIONs. The DDNP-SPIONs are prepared by conjugating DDNP carboxyl derivative to oleic acid-treated SPIONs through ligand exchange. The structure, size distribution and magnetic property were identified by IR, TGA-DTA, XRD, TEM, Zetasizer Nano and VSM. TEM and Zetasizer Nano observations indicated that the DDNP-SPIONs are relatively mono-dispersed spherical distribution with an average size of 11.7nm. The DDNP-SPIONs were then further analyzed for their MRI relaxation properties using MR imaging and demonstrated high T2 relaxivity of 140.57s(-1)FemM(-1), and the vitro experiment that DDNP-SPIONs binding to ß-Amyloid aggregates were then investigated by fluorophotometry, the results showed that the combination had induced the fluorescence enhancement of the DDNP-SPIONs and displayed tremendous promise for use as a contrast agent of Alzheimer's disease in MRI.

Supramolecular Polypseudorotaxanes composed of star-shaped porphyrin-cored poly(epsilon-caprolactone) and alpha-cyclodextrin.

Star-shaped porphyrin-cored poly(epsilon-caprolactone) (SPPCL) was synthesized using a tetrahydroxyethyl-terminated porphyrin as a core initiator and stannous octoate as a catalyst in bulk at 120 degrees C. The molecular weight of as-synthesized polymer could be adjusted linearly by controlling the molar ratio of epsilon-caprolactone to porphyrin core initiator, and the molecular weight distribution was reasonably narrow. Supramolecular polypseudorotaxanes were prepared by inclusion complexation of SPPCL with alpha-cyclodextrin (alpha-CD) and thoroughly characterized by means of FT-IR, 1H NMR, 13C CP/MAS NMR, DSC, TGA, and WAXD. The results demonstrated that the porphyrin-cored polypseudorotaxanes formed through alpha-CD molecules threading onto the branch chains of star-shaped SPPCL polymers, and they had a channel-type crystalline structure. Meanwhile, the original crystallization of SPPCL polymers within the polypseudorotaxanes was completely suppressed in the alpha-CD cavities. Moreover, inclusion complexation between SPPCL and alpha-CD enhanced the thermal stability of both the guest SPPCL polymers and the host alpha-CD. Furthermore, both the SPPCL polymers and the polypseudorotaxanes showed similar fluorescent and UV-vis spectra compared with porphyrin core initiator. Consequently, this will not only provide potentially porphyrin-cored poly(epsilon-caprolactone) and its polypseudorotaxanes for photodynamic therapy but also improve the compatibility between poly(epsilon-caprolactone) and peptide drugs for drug delivery.