Two pathways to understanding electron transfer in reaction centers from photosynthetic bacteria: A comparison of Rhodobacter sphaeroides and Rhodobacter capsulatus mutants.

The rates, yields, mechanisms and directionality of electron transfer (ET) are explored in twelve pairs of Rhodobacter (R.) sphaeroides and R. capsulatus mutant RCs designed to defeat ET from the excited primary donor (P*) to the A-side cofactors and re-direct ET to the normally inactive mirror-image B-side cofactors. In general, the R. sphaeroides variants have larger P+HB- yields (up to ∼90%) than their R. capsulatus analogs (up to ∼60%), where HB is the B-side bacteriopheophytin. Substitution of Tyr for Phe at L-polypeptide position L181 near BB primarily increases the contribution of fast P* â†’ P+BB- â†’ P+HB- two-step ET, where BB is the "bridging" B-side bacteriochlorophyll. The second step (∼6-8 ps) is slower than the first (∼3-4 ps), unlike A-side two-step ET (P* â†’ P+BA- â†’ P+HA-) where the second step (∼1 ps) is faster than the first (∼3-4 ps) in the native RC. Substitutions near HB, at L185 (Leu, Trp or Arg) and at M-polypeptide site M133/131 (Thr, Val or Glu), strongly affect the contribution of slower (20-50 ps) P* â†’ P+HB- one-step superexchange ET. Both ET mechanisms are effective in directing electrons "the wrong way" to HB and both compete with internal conversion of P* to the ground state (∼200 ps) and ET to the A-side cofactors. Collectively, the work demonstrates cooperative amino-acid control of rates, yields and mechanisms of ET in bacterial RCs and how A- vs. B-side charge separation can be tuned in both species.

High Yield of B-Side Electron Transfer at 77 K in the Photosynthetic Reaction Center Protein from Rhodobacter sphaeroides.

The primary electron transfer (ET) processes at 295 and 77 K are compared for the Rhodobacter sphaeroides reaction center (RC) pigment-protein complex from 13 mutants including a wild-type control. The engineered RCs bear mutations in the L and M polypeptides that largely inhibit ET from the excited state P* of the primary electron donor (P, a bacteriochlorophyll dimer) to the normally photoactive A-side cofactors and enhance ET to the C2-symmetry related, and normally photoinactive, B-side cofactors. P* decay is multiexponential at both temperatures and modeled as arising from subpopulations that differ in contributions of two-step ET (e.g., P* → P+BB- → P+HB-), one-step superexchange ET (e.g., P* → P+HB-), and P* → ground state. [HB and BB are monomeric bacteriopheophytin and bacteriochlorophyll, respectively.] The relative abundances of the subpopulations and the inherent rate constants of the P* decay routes vary with temperature. Regardless, ET to produce P+HB- is generally faster at 77 K than at 295 K by about a factor of 2. A key finding is that the yield of P+HB-, which ranges from ∼5% to ∼90% among the mutant RCs, is essentially the same at 77 K as at 295 K in each case. Overall, the results show that ET from P* to the B-side cofactors in these mutants does not require thermal activation and involves combinations of ET mechanisms analogous to those operative on the A side in the native RC.

Consequences of saturation mutagenesis of the protein ligand to the B-side monomeric bacteriochlorophyll in reaction centers from Rhodobacter capsulatus.

In bacterial reaction centers (RCs), photon-induced initial charge separation uses an A-side bacteriochlorophyll (BChl, BA) and bacteriopheophytin (BPh, HA), while the near-mirror image B-side BB and HB cofactors are inactive. Two new sets of Rhodobacter capsulatus RC mutants were designed, both bearing substitution of all amino acids for the native histidine M180 (M-polypeptide residue 180) ligand to the core Mg ion of BB. Residues are identified that largely result in retention of a BChl in the BB site (Asp, Ser, Pro, Gln, Asn, Gly, Cys, Lys, and Thr), ones that largely harbor the Mg-free BPh in the BB site (Leu and Ile), and ones for which isolated RCs are comprised of a substantial mixture of these two RC types (Ala, Glu, Val, Met and, in one set, Arg). No protein was isolated when M180 is Trp, Tyr, Phe, or (in one set) Arg. These findings are corroborated by ground state spectra, pigment extractions, ultrafast transient absorption studies, and the yields of B-side transmembrane charge separation. The changes in coordination chemistries did not reveal an RC with sufficiently precise poising of the redox properties of the BB-site cofactor to result in a high yield of B-side electron transfer to HB. Insights are gleaned into the amino acid properties that support BChl in the BB site and into the widely observed multi-exponential decay of the excited state of the primary electron donor. The results also have direct implications for tuning free energies of the charge-separated intermediates in RCs and mimetic systems.

Engineering of B800 bacteriochlorophyll binding site specificity in the Rhodobacter sphaeroides LH2 antenna.

The light-harvesting 2 complex (LH2) of the purple phototrophic bacterium Rhodobacter sphaeroides is a highly efficient, light-harvesting antenna that allows growth under a wide-range of light intensities. In order to expand the spectral range of this antenna complex, we first used a series of competition assays to measure the capacity of the non-native pigments 3-acetyl chlorophyll (Chl) a, Chl d, Chl f or bacteriochlorophyll (BChl) b to replace native BChl a in the B800 binding site of LH2. We then adjusted the B800 site and systematically assessed the binding of non-native pigments. We find that Arg-10 of the LH2 ß polypeptide plays a crucial role in binding specificity, by providing a hydrogen-bond to the 3-acetyl group of native and non-native pigments. Reconstituted LH2 complexes harbouring the series of (B)Chls were examined by transient absorption and steady-state fluorescence spectroscopies. Although slowed 10-fold to ~6 ps, energy transfer from Chl a to B850 BChl a remained highly efficient. We measured faster energy-transfer time constants for Chl d (3.5 ps) and Chl f (2.7 ps), which have red-shifted absorption maxima compared to Chl a. BChl b, red-shifted from the native BChl a, gave extremely rapid (≤0.1 ps) transfer. These results show that modified LH2 complexes, combined with engineered (B)Chl biosynthesis pathways in vivo, have potential for retaining high efficiency whilst acquiring increased spectral range.

Optimizing multi-step B-side charge separation in photosynthetic reaction centers from Rhodobacter capsulatus.

Using high-throughput methods for mutagenesis, protein isolation and charge-separation functionality, we have assayed 40 Rhodobacter capsulatus reaction center (RC) mutants for their P(+)QB(-) yield (P is a dimer of bacteriochlorophylls and Q is a ubiquinone) as produced using the normally inactive B-side cofactors BB and HB (where B is a bacteriochlorophyll and H is a bacteriopheophytin). Two sets of mutants explore all possible residues at M131 (M polypeptide, native residue Val near HB) in tandem with either a fixed His or a fixed Asn at L181 (L polypeptide, native residue Phe near BB). A third set of mutants explores all possible residues at L181 with a fixed Glu at M131 that can form a hydrogen bond to HB. For each set of mutants, the results of a rapid millisecond screening assay that probes the yield of P(+)QB(-) are compared among that set and to the other mutants reported here or previously. For a subset of eight mutants, the rate constants and yields of the individual B-side electron transfer processes are determined via transient absorption measurements spanning 100 fs to 50 µs. The resulting ranking of mutants for their yield of P(+)QB(-) from ultrafast experiments is in good agreement with that obtained from the millisecond screening assay, further validating the efficient, high-throughput screen for B-side transmembrane charge separation. Results from mutants that individually show progress toward optimization of P(+)HB(-)→P(+)QB(-) electron transfer or initial P*→P(+)HB(-) conversion highlight unmet challenges of optimizing both processes simultaneously.

Amphiphilic, hydrophilic, or hydrophobic synthetic bacteriochlorins in biohybrid light-harvesting architectures: consideration of molecular designs.

Biohybrid light-harvesting architectures can be constructed that employ native-like bacterial photosynthetic antenna peptides as a scaffold to which synthetic chromophores are attached to augment overall spectral coverage. Synthetic bacteriochlorins are attractive to enhance capture of solar radiation in the photon-rich near-infrared spectral region. The effect of the polarity of the bacteriochlorin substituents on the antenna self-assembly process was explored by the preparation of a bacteriochlorin-peptide conjugate using a synthetic amphiphilic bacteriochlorin (B1) to complement prior studies using hydrophilic (B2, four carboxylic acids) or hydrophobic (B3) bacteriochlorins. The amphiphilic bioconjugatable bacteriochlorin B1 with a polar ammonium-terminated tail was synthesized by sequential Pd-mediated reactions of a 3,13-dibromo-5-methoxybacteriochlorin. Each bacteriochlorin bears a maleimido-terminated tether for attachment to a cysteine-containing analog of the Rhodobacter sphaeroides antenna ß-peptide to give conjugates ß-B1, ß-B2, and ß-B3. Given the hydrophobic nature of the ß-peptide, the polarity of B1 and B2 facilitated purification of the respective conjugate compared to the hydrophobic B3. Bacteriochlorophyll a (BChl a) associates with each conjugate in aqueous micellar media to form a dyad containing two ß-peptides, two covalently attached synthetic bacteriochlorins, and a datively bonded BChl-a pair, albeit to a limited extent for ß-B2. The reversible assembly/disassembly of dyad (ß-B2/BChl)2 was examined in aqueous detergent (octyl glucoside) solution by temperature variation (15-35 °C). The energy-transfer efficiency from the synthetic bacteriochlorin to the BChl-a dimer was found to be 0.85 for (ß-B1/BChl)2, 0.40 for (ß-B2/BChl)2, and 0.85 for (ß-B3/BChl)2. Thus, in terms of handling, assembly and energy-transfer efficiency taken together, the amphiphilic design examined herein is more attractive than the prior hydrophilic or hydrophobic designs.

Versatile design of biohybrid light-harvesting architectures to tune location, density, and spectral coverage of attached synthetic chromophores for enhanced energy capture.

Biohybrid antennas built upon chromophore-polypeptide conjugates show promise for the design of efficient light-capturing modules for specific purposes. Three new designs, each of which employs analogs of the ß-polypeptide from Rhodobacter sphaeroides, have been investigated. In the first design, amino acids at seven different positions on the polypeptide were individually substituted with cysteine, to which a synthetic chromophore (bacteriochlorin or Oregon Green) was covalently attached. The polypeptide positions are at -2, -6, -10, -14, -17, -21, and -34 relative to the 0-position of the histidine that coordinates bacteriochlorophyll a (BChl a). All chromophore-polypeptides readily formed LH1-type complexes upon combination with the α-polypeptide and BChl a. Efficient energy transfer occurs from the attached chromophore to the circular array of 875 nm absorbing BChl a molecules (denoted B875). In the second design, use of two attachment sites (positions -10 and -21) on the polypeptide affords (1) double the density of chromophores per polypeptide and (2) a highly efficient energy-transfer relay from the chromophore at -21 to that at -10 and on to B875. In the third design, three spectrally distinct bacteriochlorin-polypeptides were prepared (each attached to cysteine at the -14 position) and combined in an ~1:1:1 mixture to form a heterogeneous mixture of LH1-type complexes with increased solar coverage and nearly quantitative energy transfer from each bacteriochlorin to B875. Collectively, the results illustrate the great latitude of the biohybrid approach for the design of diverse light-harvesting systems.

Biohybrid photosynthetic antenna complexes for enhanced light-harvesting.

Biohybrid antenna systems have been constructed that contain synthetic chromophores attached to 31mer analogues of the bacterial photosynthetic core light-harvesting (LH1) ß-polypeptide. The peptides are engineered with a Cys site for bioconjugation with maleimide-terminated chromophores, which include synthetic bacteriochlorins (BC1, BC2) with strong near-infrared absorption and commercial dyes Oregon green (OGR) and rhodamine red (RR) with strong absorption in the blue-green to yellow-orange regions. The peptides place the Cys 14 (or 6) residues before a native His site that binds bacteriochlorophyll a (BChl-a) and, like the native LH proteins, have high helical content as probed by single-reflection IR spectroscopy. The His residue associates with BChl-a as in the native LH1 ß-polypeptide to form dimeric ßß-subunit complexes [31mer(-14Cys)X/BChl](2), where X is one of the synthetic chromophores. The native-like BChl-a dimer has Q(y) absorption at 820 nm and serves as the acceptor for energy from light absorbed by the appended synthetic chromophore. The energy-transfer characteristics of biohybrid complexes have been characterized by steady-state and time-resolved fluorescence and absorption measurements. The quantum yields of energy transfer from a synthetic chromophore located 14 residues from the BChl-coordinating His site are as follows: OGR (0.30) < RR (0.60) < BC2 (0.90). Oligomeric assemblies of the subunit complexes [31mer(-14Cys)X/BChl](n) are accompanied by a bathochromic shift of the Q(y) absorption of the BChl-a oligomer as far as the 850-nm position found in cyclic native photosynthetic LH2 complexes. Room-temperature stabilized oligomeric biohybrids have energy-transfer quantum yields comparable to those of the dimeric subunit complexes as follows: OGR (0.20) < RR (0.80) < BC1 (0.90). Thus, the new biohybrid antennas retain the energy-transfer and self-assembly characteristics of the native antenna complexes, offer enhanced coverage of the solar spectrum, and illustrate a versatile paradigm for the construction of artificial LH systems.

Synthesis and photophysical characterization of stable indium bacteriochlorins.

Bacteriochlorins have wide potential in photochemistry because of their strong absorption of near-infrared light, yet metallobacteriochlorins traditionally have been accessed with difficulty. Established acid-catalysis conditions [BF(3)·OEt(2) in CH(3)CN or TMSOTf/2,6-di-tert-butylpyridine in CH(2)Cl(2)] for the self-condensation of dihydrodipyrrin-acetals (bearing a geminal dimethyl group in the pyrroline ring) afford stable free base bacteriochlorins. Here, InBr(3) in CH(3)CN at room temperature was found to give directly the corresponding indium bacteriochlorin. Application of the new acid catalysis conditions has afforded four indium bacteriochlorins bearing aryl, alkyl/ester, or no substituents at the ß-pyrrolic positions. The indium bacteriochlorins exhibit (i) a long-wavelength absorption band in the 741-782 nm range, which is shifted bathochromically by 22-32 nm versus the analogous free base species, (ii) fluorescence quantum yields (0.011-0.026) and average singlet lifetime (270 ps) diminished by an order of magnitude versus that (0.13-0.25; 4.0 ns) for the free base analogues, and (iii) higher average yield (0.9 versus 0.5) yet shorter average lifetime (30 vs 105 µs) of the lowest triplet excited state compared to the free base compounds. The differences in the excited-state properties of the indium chelates versus free base bacteriochlorins derive primarily from a 30-fold greater rate constant for S(1) → T(1) intersystem crossing, which stems from the heavy-atom effect on spin-orbit coupling. The trends in optical properties of the indium bacteriochlorins versus free base analogues, and the effects of 5-OMe versus 5-H substituents, correlate well with frontier molecular-orbital energies and energy gaps derived from density functional theory calculations. Collectively the synthesis, photophysical properties, and electronic characteristics of the indium bacteriochlorins and free base analogues reported herein should aid in the further design of such chromophores for diverse applications.

Kinetics and energetics of electron transfer in reaction centers of the photosynthetic bacterium Roseiflexus castenholzii.

The kinetics and thermodynamics of the photochemical reactions of the purified reaction center (RC)-cytochrome (Cyt) complex from the chlorosome-lacking, filamentous anoxygenic phototroph, Roseiflexus castenholzii are presented. The RC consists of L- and M-polypeptides containing three bacteriochlorophyll (BChl), three bacteriopheophytin (BPh) and two quinones (Q(A) and Q(B)), and the Cyt is a tetraheme subunit. Two of the BChls form a dimer P that is the primary electron donor. At 285K, the lifetimes of the excited singlet state, P*, and the charge-separated state P(+)H(A)(-) (where H(A) is the photoactive BPh) were found to be 3.2±0.3 ps and 200±20 ps, respectively. Overall charge separation P*→→ P(+)Q(A)(-) occurred with ≥90% yield at 285K. At 77K, the P* lifetime was somewhat shorter and the P(+)H(A)(-) lifetime was essentially unchanged. Poteniometric titrations gave a P(865)/P(865)(+) midpoint potential of +390mV vs. SHE. For the tetraheme Cyt two distinct midpoint potentials of +85 and +265mV were measured, likely reflecting a pair of low-potential hemes and a pair of high-potential hemes, respectively. The time course of electron transfer from reduced Cyt to P(+) suggests an arrangement where the highest potential heme is not located immediately adjacent to P. Comparisons of these and other properties of isolated Roseiflexus castenholzii RCs to those from its close relative Chloroflexus aurantiacus and to RCs from the purple bacteria are made.

Stable synthetic cationic bacteriochlorins as selective antimicrobial photosensitizers.

Photodynamic inactivation is a rapidly developing antimicrobial treatment that employs a nontoxic photoactivatable dye or photosensitizer in combination with harmless visible light to generate reactive oxygen species that are toxic to cells. Tetrapyrroles (e.g., porphyrins, chlorins, bacteriochlorins) are a class of photosensitizers that exhibit promising characteristics to serve as broad-spectrum antimicrobials. In order to bind to and efficiently penetrate into all classes of microbial cells, tetrapyrroles should have structures that contain (i) one or more cationic charge(s) or (ii) a basic group. In this report, we investigate the use of new stable synthetic bacteriochlorins that have a strong absorption band in the range 720 to 740 nm, which is in the near-infrared spectral region. Four bacteriochlorins with 2, 4, or 6 quaternized ammonium groups or 2 basic amine groups were compared for light-mediated killing against a gram-positive bacterium (Staphylococcus aureus), a gram-negative bacterium (Escherichia coli), and a dimorphic fungal yeast (Candida albicans). Selectivity was assessed by determining phototoxicity against human HeLa cancer cells under the same conditions. All four compounds were highly active (6 logs of killing at 1 microM or less) against S. aureus and showed selectivity for bacteria over human cells. Increasing the cationic charge increased activity against E. coli. Only the compound with basic groups was highly active against C. albicans. Supporting photochemical and theoretical characterization studies indicate that (i) the four bacteriochlorins have comparable photophysical features in homogeneous solution and (ii) the anticipated redox characteristics do not correlate with cell-killing ability. These results support the interpretation that the disparate biological activities observed stem from cellular binding and localization effects rather than intrinsic electronic properties. These findings further establish cationic bacteriochlorins as extremely active and selective near-infrared activated antimicrobial photosensitizers, and the results provide fundamental information on structure-activity relationships for antimicrobial photosensitizers.

In vitro photodynamic therapy and quantitative structure-activity relationship studies with stable synthetic near-infrared-absorbing bacteriochlorin photosensitizers.

Photodynamic therapy (PDT) is a rapidly developing approach to treating cancer that combines harmless visible and near-infrared light with a nontoxic photoactivatable dye, which upon encounter with molecular oxygen generates the reactive oxygen species that are toxic to cancer cells. Bacteriochlorins are tetrapyrrole compounds with two reduced pyrrole rings in the macrocycle. These molecules are characterized by strong absorption features from 700 to >800 nm, which enable deep penetration into tissue. This report describes testing of 12 new stable synthetic bacteriochlorins for PDT activity. The 12 compounds possess a variety of peripheral substituents and are very potent in killing cancer cells in vitro after illumination. Quantitative structure-activity relationships were derived, and subcellular localization was determined. The most active compounds have both low dark toxicity and high phototoxicity. This combination together with near-infrared absorption gives these bacteriochlorins great potential as photosensitizers for treatment of cancer.

Stable synthetic bacteriochlorins overcome the resistance of melanoma to photodynamic therapy.

Cutaneous malignant melanoma remains a therapeutic challenge, and patients with advanced disease have limited survival. Photodynamic therapy (PDT) has been successfully used to treat many malignancies, and it may show promise as an antimelanoma modality. However, high melanin levels in melanomas can adversely affect PDT effectiveness. Herein the extent of melanin contribution to melanoma resistance to PDT was investigated in a set of melanoma cell lines that markedly differ in the levels of pigmentation; 3 new bacteriochlorins successfully overcame the resistance. Cell killing studies determined that bacteriochlorins are superior at (LD(50) approximately 0.1 microM) when compared with controls such as the FDA-approved Photofrin (LD(50) approximately 10 microM) and clinically tested LuTex (LD(50) approximately 1 microM). The melanin content affects PDT effectiveness, but the degree of reduction is significantly lower for bacteriochlorins than for Photofrin. Microscopy reveals that the least effective bacteriochlorin localizes predominantly in lysosomes, while the most effective one preferentially accumulates in mitochondria. Interestingly all bacteriochlorins accumulate in melanosomes, and subsequent illumination leads to melanosomal damage shown by electron microscopy. Fluorescent probes show that the most effective bacteriochlorin produces significantly higher levels of hydroxyl radicals, and this is consistent with the redox properties suggested by molecular-orbital calculations. The best in vitro performing bacteriochlorin was tested in vivo in a mouse melanoma model using spectrally resolved fluorescence imaging and provided significant survival advantage with 20% of cures (P<0.01).

Low-temperature studies of electron transfer to the M side of YFH reaction centers from Rhodobacter capsulatus.

There have been extensive experimental and theoretical studies of the temperature dependence of the rates of electron transfer between the cofactors associated primarily with the L polypeptide (or A branch) in the bacterial photosynthetic reaction center (RC). The focus of this paper is to gain further insight into the temperature dependence of rate of initial electron transfer to the parallel cofactor chain associated mainly with the M polypeptide (or B branch), which is inactive in the native RC. To this end, picosecond transient absorption measurements have been carried out on RCs of the YFH mutant of the photosynthetic bacterium Rhodobacter capsulatus at 77 K. In wild-type RCs, symmetry-related residues Phe M208 and Tyr L181 flank the primary electron donor (P) and are key to initial charge separation. In the YFH mutant these residues are swapped, i.e., are Tyr M208 and Phe L181. The third mutation in YFH changes Leu M212 to His and results in replacement of the L-side bacteriopheophytin (H(L)) with a bacteriochlorophyll denoted beta. Studies were carried out at 77 K for RCs in detergent-buffer/glycerol glasses utilizing either the detergent N-lauryl-N,N-dimethylamine N-oxide (LDAO) or Deriphat 160-C. In both media, excitation of P to its lowest singlet excited state (P*) elicits complex kinetic behavior that, in the simplest phenomenological description, involves two P* cofactor-protein populations: one that is capable of charge separation (active) and one that is not (inactive). The amplitudes of the components of the P* stimulated-emission kinetic profiles, and the amplitudes and time course of accompanying P-bleaching recovery, reveal that the two P* populations, active/inactive, are in 60/40 (LDAO) or 40/60 (Deriphat) proportion. In the nonphotoactive fraction, P* decays solely via return to the ground state with its inherent lifetime (i.e., lifetime in the absence of electron transfer) of 170 ps (LDAO) or 350 ps (Deriphat). In the photoactive fraction, P* has a lifetime of 4.5 ps (LDAO) or 13 ps (Deriphat) and decays by parallel electron transfer to H(M) (30%) and beta (70%) on the M and L branches, respectively. The rate constant for P* --> P(+)H(M)(-) electron transfer is (15 ps)(-1) (LDAO) or (43 ps)(-1) (Deriphat) at 77 K. These rate constants are about 2-fold greater than those determined at 295 K in the corresponding detergent/buffer solutions. These results combined with related findings from prior work show that the primary charge-separation events on both sides of the RC are basically activationless processes. In particular, in the functionally active P* population of YFH RCs, there is little or no apparent energy barrier (e.g., involving motions of the cofactors or protein or both) for electron transfer from P* to the either side of the RC. This conclusion holds irrespective of the precise description of the complex kinetic behavior that is observed. In addition to the observations on the temperature-dependent photochemistry, the 77 K transient absorption spectra in the near-infrared resolve a bacteriopheophytin anion band at 955 nm for wild-type RCs and, for the beta-containing mutants L(M212)H and YFH, a bacteriochlorophyll anion band at 1015 nm.

Resonance Raman characterization of Rhodobacter capsulatus reaction centers with lysine mutations near the accessory bacteriochlorophylls.

Lysine residues have been introduced into Rhodobacter capsulatus reaction centers at M-polypeptide position 201 and at L-polypeptide position 178. These positions are in the proximity of ring V of the accessory bacterochlorophylls BA and BB, respectively. Resonance Raman studies indicate that the introduction of a Lys residue at either position M201 or L178 results in structural perturbations to the BChl cofactors. Lys at L178 directly interacts with BB, most likely via a hydrogen bond. The hydrogen bonding interaction is consistent with enhanced B branch electron transfer that is observed in RCs from the S(L178)K/G(M201)D/L(M212)H triple mutant versus the G(M201)D/L(M212)H double mutant. In contrast, the introduction of a Lys at M201 does not result in hydrogen bonding to the BA cofactor, in contrast to the introduction of a His at M201. Accordingly, the alkyl ammonium head group of the side chain of the Lys at M201 residue appears to be distant from BA.

Photoinduced axial ligation and deligation dynamics of nonplanar nickel dodecaarylporphyrins.

The ground- and excited-state metal-ligand dynamics of nonplanar nickel(II) 2,3,5,7,8,10,12,13,15,17,18,20-dodecaphenylporphyrin (NiDPP) and two fluorinated analogues (NiF(20)DPP and NiF(28)DPP) have been investigated using static and time-resolved absorption spectroscopy in toluene and in ligating media that differ in basicity, aromaticity, and steric encumbrance. Because of the electronic and steric consequences of nonplanarity, NiDPP does not bind axial ligands in the ground state, but metal coordination does occur after photoexcitation with multistep dynamics that depend on the properties of the ligand. Following the structural relaxations that occur in all nickel porphyrins within approximately 10 ps, ligand binding to photoexcited NiDPP is progressively longer in pyridine, piperidine, and 3,5-lutidine (25-100 ps) but does not occur at all in 2,6-lutidine in which the ligating nitrogen is sterically encumbered. The transient intermediate that is formed, which nominally could be either a five- or six-coordinate species, also has a ligand-dependent lifetime (200-550 ps). Decay of this intermediate occurs partially via ligand release to re-form the uncoordinated species, in competition with binding of the second axial ligand and/or conformational/electronic relaxations (of a six-coordinate intermediate) to give the ground state of the bis-ligated photoproduct. The finding that the photoproduct channel principally depends on ligand characteristics along with the time-evolving spectra suggests that the transient intermediate may involve a five-coordinate species. In contrast to NiDPP, the fluorinated analogues NiF(20)DPP and NiF(28)DPP do coordinate axial ligands in the ground state but eject them after photoexcitation. Collectively, these results demonstrate the sensitivity with which the electronic and structural characteristics of the macrocycle, substituents, and solvent (ligands) can govern the photophysical and photochemical properties of nonplanar porphyrins and open new avenues for exploring photoinduced ligand association and dissociation behavior.