Synergistic interaction of hTGF-ß3 with hBMP-6 promotes articular cartilage formation in chitosan scaffolds with hADSCs: implications for regenerative medicine.

BACKGROUND: Human TGF-ß3 has been used in many studies to induce genes coding for typical cartilage matrix components and accelerate chondrogenic differentiation, making it the standard constituent in most cultivation media used for the assessment of chondrogenesis associated with various stem cell types on carrier matrices. However, in vivo data suggests that TGF-ß3 and its other isoforms also induce endochondral and intramembranous osteogenesis in non-primate species to other mammals. Based on previously demonstrated improved articular cartilage induction by a using hTGF-ß3 and hBMP-6 together on hADSC cultures and the interaction of TGF- ß with matrix in vivo, the present study investigates the interaction of a chitosan scaffold as polyanionic polysaccharide with both growth factors. The study analyzes the difference between chondrogenic differentiation that leads to stable hyaline cartilage and the endochondral ossification route that ends in hypertrophy by extending the usual panel of investigated gene expression and stringent employment of quantitative PCR. RESULTS: By assessing the viability, proliferation, matrix formation and gene expression patterns it is shown that hTGF-ß3 + hBMP-6 promotes improved hyaline articular cartilage formation in a chitosan scaffold in which ACAN with Col2A1 and not Col1A1 nor Col10A1 where highly expressed both at a transcriptional and translational level. Inversely, hTGF-ß3 alone tended towards endochondral bone formation showing according protein and gene expression patterns. CONCLUSION: These findings demonstrate that clinical therapies should consider using hTGF-ß3 + hBMP-6 in articular cartilage regeneration therapies as the synergistic interaction of these morphogens seems to ensure and maintain proper hyaline articular cartilage matrix formation counteracting degeneration to fibrous tissue or ossification. These effects are produced by interaction of the growth factors with the polysaccharide matrix.

The effect of autologous Achilles bursal tissue implants in tendon-to-bone healing of rotator cuff tears in rats.

BACKGROUND: The aim of this study was to investigate the influence of autologous bursal tissue derived from the Achilles bursa on tendon-to-bone healing after rotator cuff tear repair in a rat model. METHODS: A total of 136 Sprague-Dawley rats were randomly assigned to either an untreated or a bursal tissue application group or biomechanical testing and histologic testing after rotator cuff repair. After separating the supraspinatus tendon close to the greater tuberosity, the tendon was reattached either unaltered or with a bursal tissue interposition sewn onto the interface. Immunohistologic analysis was performed 1 and 7 weeks after supraspinatus tendon reinsertion. Biomechanical testing of the tendon occurred 6 and 7 weeks after reinsertion. RESULTS: Immunohistologic results demonstrated a significantly higher percentage of Type II collagen (P = .04) after 1 and 7 weeks in the tendon-to-bone interface using autologous bursal tissue in comparison to control specimens. The bursa group showed a significantly higher collagen I to III quotient (P = .03) at 1 week after surgery in comparison to the 7-week postsurgery bursa groups and controls. Biomechanical assessment showed that overall tendon stiffness (P = .002) and the tendon viscoelasticity in the bursa group (P = .003) was significantly improved after 6 and 7 weeks. There was no significant difference (P = .55) in force to failure between the bursa group and the control group after 6 and 7 weeks. CONCLUSION: Autologous bursal tissue derived from the Achilles bursa and implanted to the tendon-to-bone interface after rotator cuff repair facilitates a faster healing response to re-establish the biologic and biomechanical integrity of the rotator cuff in rats.

Rotator Cuff Repair With Autologous Tenocytes and Biodegradable Collagen Scaffold: A Histological and Biomechanical Study in Sheep.

BACKGROUND: Large rotator cuff tears still represent a challenging problem in orthopaedics. The use of tenocytes on biomaterials/scaffolds for the repair of large rotator cuff defects might be a promising approach in the field of tendon regeneration. HYPOTHESIS: Cultivated autologous tenocytes seeded on a collagen scaffold lead to enhanced histological and biomechanical results after rotator cuff repair in a sheep model as compared with unseeded scaffolds in an acute setting. STUDY DESIGN: Controlled laboratory study. METHODS: At the tendon-bone junction of the infraspinatus tendon of the right foreleg of 24 sheep, a 3.5 × 1.5-cm tendon defect was created. Sheep were randomly allocated to group 1, a defect; group 2, where an unseeded collagen scaffold was implanted; or group 3, which received the implantation of a collagen scaffold seeded with autologous tenocytes. Twelve weeks postoperatively, tendon regeneration was examined histologically and biomechanically. RESULTS: The histology of the neotendons of group 3 showed better fiber patterns, a higher production of proteoglycans, and an increased genesis of collagen III in contrast to groups 1 and 2. Immunostaining revealed less tissue dedifferentiation, a more structured cartilage layer, and homogeneous cartilage-bone transition in group 3 in comparison with groups 1 and 2. Biomechanically, the tensile strength of the reconstructed tendons in group 3 (mean load to failure, 2516 N; SD, 407.5 N) was approximately 84% that of the native tendons (mean load to failure, 2995 N; SD, 223.1 N) without statistical significance. A significant difference (P = .0095) was registered between group 1 (66.9% with a mean load to failure of 2004 N; SD, 273.8 N) and the native tendons, as well as between group 2 (69.7% with a mean load to failure of 2088 N; SD, 675.4 N) and the native tendons for mean ultimate tensile strength. In breaking stress, a significant difference (P = .0095) was seen between group 1 (mean breaking stress, 1335 N/mm2; SD, 182.7 N/mm2) and the native tendons, as well as between group 2 (breaking stress, 1392 N/mm2; SD, 450.2 N/mm2) and the native tendons (mean breaking stress, 1996 N/mm2; SD, 148.7 N/mm2). Again, there was no significant difference between group 3 (mean breaking stress, 1677 N/mm2; SD, 271.7 N/mm2) and the native tendons. CONCLUSION: Autologous tenocytes seeded on collagen scaffolds yield enhanced biomechanical results after tendon-bone reconstruction as compared with unseeded scaffolds in an acute setting. Biomechanical results and histological outcomes were promising, showing that the use of autologous tenocytes with specific carrier matrices could be a novel approach for repairing rotator cuff tears. CLINICAL RELEVANCE: This study supports the use of tenocytes and scaffolds for improving the quality of tendon-bone regeneration.

Gene activated adipose tissue fragments as advanced autologous biomaterials for bone regeneration: osteogenic differentiation within the tissue and implications for clinical translation.

Cost-effective, expedited approaches for bone regeneration are urgently needed in an ageing population. Bone Morphogenetic Proteins (BMPs) stimulate osteogenesis but their efficacy is impeded by their short half-life. Delivery by genetically modified cells can overcome this problem. However, cell isolation and propagation represent significant obstacles for the translation into the clinic. Instead, complete gene activated fragments of adipose tissue hold great potential for bone repair. Here, using an in-vitro culture system, we investigated whether adenoviral transduction with human BMP-2 can promote osteogenic differentiation within adipose tissue fragments. Osteoinduction in adipose tissue fragments was evaluated by quantitative reverse transcriptase polymerase chain reaction, immunohistology and histomorphometry. BMP-2 transduced adipose tissue synthesized BMP-2 protein over 30 days peaking by day six, which significantly promoted osteogenic differentiation as indicated by increased calcium depositions, up-regulation of bone marker genes, and bone-related protein expression. Our results demonstrate that cells within adipose tissue fragments can differentiate osteogenically after BMP-2 transduction of cells on the surface of the adipose tissue. BMP-2 gene activated adipose tissue represents an advanced osteo-regenerative biomaterial that can actively contribute to osteogenesis and potentially enable the development of a novel, cost-effective, one-step surgical approach to bone repair without the need for cell isolation.

Biomimetic matrices self-initiating the induction of bone formation.

The new strategy of tissue engineering, and regenerative medicine at large, is to construct biomimetic matrices to mimic nature's hierarchical structural assemblages and mechanisms of simplicity and elegance that are conserved throughout genera and species. There is a direct spatial and temporal relationship of morphologic and molecular events that emphasize the biomimetism of the remodeling cycles of the osteonic corticocancellous bone versus the "geometric induction of bone formation," that is, the induction of bone by "smart" concavities assembled in biomimetic matrices of macroporous calcium phosphate-based constructs. The basic multicellular unit of the corticocancellous bone excavates a trench across the bone surface, leaving in its wake a hemiosteon rather than an osteon, that is, a trench with cross-sectional geometric cues of concavities after cyclic episodes of osteoclastogenesis, eventually leading to osteogenesis. The concavities per se are geometric regulators of growth-inducing angiogenesis and osteogenesis as in the remodeling processes of the corticocancellous bone. The concavities act as a powerful geometric attractant for myoblastic/myoendothelial and/or endothelial/pericytic stem cells, which differentiate into bone-forming cells. The lacunae, pits, and concavities cut by osteoclastogenesis within the biomimetic matrices are the driving morphogenetic cues that induce bone formation in a continuum of sequential phases of resorption/dissolution and formation. To induce the cascade of bone differentiation, the soluble osteogenic molecular signals of the transforming growth factor ß supergene family must be reconstituted with an insoluble signal or substratum that triggers the bone differentiation cascade. By carving a series of repetitive concavities into solid and/or macroporous biomimetic matrices of highly crystalline hydroxyapatite or biphasic hydroxyapatite/ß-tricalcium phosphate, we were able to embed smart biologic functions within intelligent scaffolds for tissue engineering of bone. The concavities assembled in the bioceramic constructs biomimetize the remodeling cycle of the corticocancellous bone and are endowed with multifunctional pleiotropic self-assembly capacities, initiating angiogenesis and bone formation by induction without the exogenous applications of the osteogenic-soluble molecular signals of the transforming growth factor ß supergene family. The incorporation of specific biologic activities into biomimetic matrices by manipulating the geometry of the substratum, defined as geometric induction of bone formation, is now helping to engineer therapeutic osteogenesis in clinical contexts.