Effects of Secondary Structures and pH on the Self-Assembly of Poly(ethylene glycol)-b-polytyrosine.

Different from conventional synthetic polymers, polypeptides exhibit a distinguishing characteristic of adopting specific secondary structures, including random coils, α-helixes, and ß-sheets. The conformation determines the rigidity and solubility of polypeptide chains, which further direct the self-assembly and morphology of the nanostructures. We studied the effect of distinct secondary structures on the self-assembly behavior of polytyrosine (PTyr)-derived amphiphilic copolymers. Two block copolymers of enantiopure poly(ethylene glycol)-b-poly(l-tyrosine) (PEG-b-P(l-Tyr)) and racemic poly(ethylene glycol)-b-poly(dl-tyrosine) (PEG-b-P(dl-Tyr)) were synthesized through the ring-opening polymerization of l-tyrosine N-thiocarboxyanhydride (l-Tyr-NTA) and dl-tyrosine N-thiocarboxyanhydride (dl-Tyr-NTA), respectively, by using poly(ethylene glycol) amine as the initiator. PEG44-b-P(l-Tyr)10 adopts a ß-sheet conformation and self-assembles into rectangular nanosheets in aqueous solutions, while PEG44-b-P(dl-Tyr)9 is primarily in a random coil conformation with a tiny content of ß-sheet structures, which self-assembles into sheaf-like nanofibrils. A pH increase results in the ionization of phenolic hydroxyl groups, which decreases the ß-sheet content and increases the random coil content of the PTyr segments. Accordingly, PEG44-b-P(l-Tyr)10 and PEG44-b-P(dl-Tyr)9 self-assemble to form slender nanobelts and twisted nanoribbons, respectively, in alkaline aqueous solutions. The secondary structure-driven self-assembly of PTyr-derived copolymers is promising to construct filamentous nanostructures, which have potential for applications in controlled drug release.

Assessment of the Adverse Health Effects of Aflatoxin Exposure from Unpackaged Peanut Oil in Guangdong, China.

Aflatoxins are liver carcinogens and are common contaminants in unpackaged peanut (UPP) oil. However, the health risks associated with consuming aflatoxins in UPP oil remain unclear. In this study, aflatoxin contamination in 143 UPP oil samples from Guangdong Province were assessed via liquid chromatography-tandem mass spectrometry (LC-MS). We also recruited 168 human subjects, who consumed this oil, to measure their liver functions and lipid metabolism status. Aflatoxin B1 (AFB1) was detected in 79.72% of the UPP oil samples, with levels ranging from 0.02 to 174.13 µg/kg. The average daily human intake of AFB1 from UPP oil was 3.14 ng/kg·bw/day; therefore, the incidence of liver cancer, caused by intake of 1 ng/kg·bw/day AFB1, was estimated to be 5.32 cases out of every 100,000 persons per year. Meanwhile, Hepatitis B virus (HBV) infection and AFB1 exposure exerted a synergistic effect to cause liver dysfunction. In addition, the triglycerides (TG) abnormal rate was statistically significant when using AFB1 to estimate daily intake (EDI) quartile spacing grouping (p = 0.011). In conclusion, high aflatoxin exposure may exacerbate the harmful effects of HBV infection on liver function. Contamination of UPP oil with aflatoxins in Guangdong urgently requires more attention, and public health management of the consumer population is urgently required.

Extracellular Matrix-Mimetic Immunomodulatory Hydrogel for Accelerating Wound Healing.

Macrophages play a crucial role in the complete processes of tissue repair and regeneration, and the activation of M2 polarization is an effective approach to provide a pro-regenerative immune microenvironment. Natural extracellular matrix (ECM) has the capability to modulate macrophage activities via its molecular, physical, and mechanical properties. Inspired by this, an ECM-mimetic hydrogel strategy to modulate macrophages via its dynamic structural characteristics and bioactive cell adhesion sites is proposed. The LZM-SC/SS hydrogel is in situ formed through the amidation reaction between lysozyme (LZM), 4-arm-PEG-SC, and 4-arm-PEG-SS, where LZM provides DGR tripeptide for cell adhesion, 4-arm-PEG-SS provides succinyl ester for dynamic hydrolysis, and 4-arm-PEG-SC balances the stability and dynamics of the network. In vitro and subcutaneous tests indicate the dynamic structural evolution and cell adhesion capacity promotes macrophage movement and M2 polarization synergistically. Comprehensive bioinformatic analysis further confirms the immunomodulatory ability, and reveals a significant correlation between M2 polarization and cell adhesion. A full-thickness wound model is employed to validate the induced M2 polarization, vessel development, and accelerated healing by LZM-SC/SS. This study represents a pioneering exploration of macrophage modulation by biomaterials' structures and components rather than drug or cytokines and provides new strategies to promote tissue repair and regeneration.

Membrane Nanopores Induced by Nanotoroids via an Insertion and Pore-Forming Pathway.

The formation of membrane nanopores is one of the crucial activities of cells and has attracted considerable attention. However, the understanding of their types and mechanisms is still limited. Herein, we report a novel nanopore formation phenomenon achieved through the insertion of polymeric nanotoroids into the cellular membrane. As revealed by theoretical simulations, the nanotoroid can embed in the membrane, leaving a nanopore on the cell. The through-the-cavity wrapping of lipids is critical for the retention of the nanotoroid in the membrane, which is attributed to both a relatively large inner cavity of the nanotoroid and a moderate attraction between the nanotoroid and membrane lipids. Under the guidance of the simulation predictions, experiments using polypeptide toroids as pore-forming agents were performed, confirming the unique biophysical phenomenon. This work demonstrates a distinctive pore-forming pathway, deepens the understanding of the membrane nanopore phenomenon, and assists in the design of advanced pore-forming materials.

Spiral- and meridian-patterned spheres self-assembled from block copolymer/homopolymer binary systems.

Spiral nanostructures, mainly in the 2D form, have been observed in polymer self-assembly, while well-defined 3D spirals are rarely reported. Here we report that a binary system containing polypeptide-based block copolymers and homopolymers can self-assemble into well-defined spiral spheres (3D spirals), in which the homopolymers form the core and the copolymers form the spirals. Upon increasing the preparation temperature, meridian spheres were obtained. Mixing polypeptide block copolymers with opposite backbone chirality also leads to the formation of meridian spheres. In the meridian patterns, a tighter packing manner of the phenyl groups appended to the polypeptide blocks was observed, which is responsible for the spiral-to-meridian transitions. This work enriches the research of spiral assemblies and provides a facile route to switch chiral/achiral nanostructures by regulating the packing manner of the pendant groups.

Structure Engineering of a Lanthanide-Based Metal-Organic Framework for the Regulation of Dynamic Ranges and Sensitivities for Pheochromocytoma Diagnosis.

Exploring innovative technologies to precisely quantify biomolecules is crucial but remains a great challenge for disease diagnosis. Unfortunately, the humoral concentrations of most biotargets generally vary within rather limited scopes between normal and pathological states, while most literature-reported biosensors can detect large spans of targets concentrations, but are less sensitive to small concentration changes, which consequently make them mostly unsatisfactory or even unreliable in distinguishing positives from negatives. Herein, a novel strategy of precisely quantifying the small concentration changes of a certain biotarget by editing the dynamic ranges and sensitivities of a lanthanide-based metal-organic framework (Eu-ZnMOF) biosensor is reported. By elaborately tailoring the biosensor's structure and surface areas, the tunable Eu-ZnMOF is developed with remarkably enhanced response slope within the "optimized useful detection window," enabling it to serve as a powerful signal amplifier (87.2-fold increase) for discriminating the small concentration variation of urinary vanillylmandelic acid (an early pathological signature of pheochromocytoma) within only three times between healthy and diseased subjects. This study provides a facile approach to edit the biosensors' performances through structure engineering, and exhibits promising perspectives for future clinical application in the non-invasive and accurate diagnosis of severe diseases.

Synthesis of a Pillar[5]arene-Based Polyrotaxane for Enhancing the Drug Loading Capacity of PCL-Based Supramolecular Amphiphile as an Excellent Drug Delivery Platform.

A pillar[5]arene-based nonionic polyrotaxane (PR) with star-poly(ε-caprolactone) ( S-PCL) as the axle, pillar[5]arene (DEP5) as the wheel and adamantane as the end-capped group is designed and synthesized. The resulting PR is subsequently assembled with ß-cyclodextrin end-capped pH-stimulated poly(acrylic acid) (CD-PAA) via a host-guest interaction to form the supramolecular pseudoblock polymer PR-PAA. This supramolecular pseudoblock polymer could self-assemble in aqueous solution to produce PR-PAA-based supramolecular vesicular nanoparticles (PR-SVNPs), which present significantly enhanced drug loading capacity (DLC, 45.6%) of DOX, much higher than those of superamphiphiles (PCL-PAA, 17.1%). Such a high DLC of PR-SVNPs can be most probably attributed to the greatly decreased crystallinity of PCL in PR. Moreover, the loaded drugs could be selectively released in an acidic microenvironment-responsive manner. Compared to free DOX, the DOX-loaded PR-SVNPs (DOX@PR-SVNPs) shows much enhanced cellular uptake and cytotoxicity against the SMMC-7721. More importantly, thanks to the enhanced permeability and retention (EPR) effect, DOX@PR-SVNPs exhibits appealing features such as extremely low toxicity, highly efficient intratumoral accumulation and substantial antitumor efficacy in vivo.

Synthesis and pH-responsive "schizophrenic" aggregation of a linear-dendron-like polyampholyte based on oppositely charged polypeptides.

A novel linear-dendron-like polyampholyte, poly(L-lysine)-b-D2-poly(L-glutamic acid) [PLL-b-D2-(PLGA)4], where D2 is the second generation of poly(amido amine), was prepared by hydrolyzing poly(ε-benzyloxycarbonyl-L-lysine)-b-D2-poly(γ-benzyl-L-glutamate) copolymer which was synthesized via a combination of ring-opening polymerization and click chemistry. The pH-responsive self-assembly behaviors of PLL-b-D2-(PLGA)4 were investigated in detail. It is found that PLL-b-D2-(PLGA)4 can self-assemble into PLGA-core aggregates at acidic pH and PLL-core aggregates at alkaline pH, which was accompanied with the coil-to-helix conformational transition of PLGA and PLL segments, respectively. The self-assembled aggregates with various morphologies, such as large compound micelles, worm-like micelles, large compound vesicles, simple vesicles, and rigid tubular structures have been obtained in "schizophrenic" aggregation process with simply increasing the solution pH. The hierarchical assembled fractal structures of PLL-b-D2-(PLGA)4 were observed during the solvent evaporation at high pH value.

Simulation-assisted self-assembly of multicomponent polymers into hierarchical assemblies with varied morphologies.

As you like it: The synthesis of supramolecular hierarchical nanostructures with designed morphologies has been realized through computer-simulation-guided multicomponent assembly of polypeptide-based block copolymers and homopolymers. By adjusting the attraction between hydrophobic polypeptide rods, as well as other parameters such as the molar ratio of copolymers and the rigidity of polymers, a variety of morphologies were obtained.

Functionalization of magnetic nanoparticles with dendritic-linear-brush-like triblock copolymers and their drug release properties.

Novel water-soluble dendritic-linear-brush-like triblock copolymer polyamidoamine-b-poly(2-(dimethylamino)ethyl methacrylate)-b-poly(poly(ethylene glycol) methyl ether methacrylate) (PAMAM-b-PDMAEMA-b-PPEGMA)-grafted superparamagnetic iron oxide nanoparticles (SPIONs) were successfully prepared via a two-step copper-mediated atom transfer radical polymerization (ATRP) method. The macroinitiators were immobilized on the surface of Fe(3)O(4) nanoparticles via effective ligand exchange of oleic acid with the propargyl focal point PAMAM-typed dendron (generation 2.0, denoted as propargyl-D(2.0)) containing four carboxyl acid end groups, following a click reaction with 2'-azidoethyl-2-bromoisobutylate (AEBIB). PDMAEMA and PPEGMA were grown gradually from nanoparticle surfaces using the "grafting from" approach, which rendered the SPIONs soluble in water and reversed aggregation. To the best of our knowledge, this is the first report that describes the functionalization of magnetic nanoparticles with dendritic-linear-brush-like triblock copolymers. The modified nanoparticles were systematically studied via TEM, FT-IR, DLS, XRD, NMR, TGA, and magnetization measurements. DLS measurement confirmed that the obtained dendritic-linear-brush-like triblock copolymer-grafted SPIONs had a uniform hydrodynamic particle size of average diameter less than 30 nm. The dendritic-linear-brush-like triblock copolymer-grafted SPIONs possessed excellent biocompatibility by methyl tetrazolium (MTT) assays against NIH3T3 cells and hemolysis assays with rabbit erythrocytes. Furthermore, an anticancer drug, doxorubicin (Dox), was used as a model drug and loaded into the dendritic-linear-brush-like triblock copolymer-grafted SPIONs, and subsequently, the drug releases were performed in phosphoric acid buffer solution pH = 4.7, 7.4, or 11.0 at 37 °C. The results verify that the dendritic-linear-brush-like triblock copolymer-grafted SPIONs possess pH-responsive drug release behavior. The Dox dose of the loaded and free drug required for 50% cellular growth inhibition was 2.72 and 0.72 µm/mL, respectively, according to MTT assay against a Hella cell line in vitro. Therefore, on the basis of its biocompatibility and drug release effect, the modified SPION could provide a charming opportunity to design some excellent drug delivery systems for therapeutic applications.

Super-helices self-assembled from a binary system of amphiphilic polypeptide block copolymers and polypeptide homopolymers.

We report here a discovery that amphiphilic polypeptide block copolymers and polypeptide homopolymers are able to aggregate together into super-helical structures of rods and rings, in which polypeptide chains form the core and PEG chains form the shell.

Drug releasing behavior of hybrid micelles containing polypeptide triblock copolymer.

We report a new type of hybrid polymeric micelles for drug delivery applications. These micelles consist of PLGA (PLGA: poly(l-glutamic acid)) and PEG (PEG: polyethylene glycol) mixed corona chains. In acidic condition, PLGA undergoes a transformation from water-soluble random coils to water-insoluble alpha-helix, leading to microphase separation in micelle coronas and formation of PEG channels. These channels connect the inner core and the outer milieu, accelerating the diffusion of drugs from micelles. The micelles were prepared through a co-micellization of PLGA-b-PPO-b-PLGA (PPO: poly(propylene oxide)) and PEG-b-PPO in water. During the self-assembly, the PPO blocks of both block copolymers aggregated into cores that were surrounded by mixed corona chains of PLGA and PEG blocks. We confirmed this structure by using a number of characterization techniques including nuclear magnetic resonance spectroscopy, zeta potential, circular dichroism, and dynamic light scattering. We also performed molecular dynamics (MD) simulations to verify the models of the hybrid micelle structure. One advantage of the hybrid micelles as drug carriers is their tunable release rate without sacrificing colloidal stability. The rate can be tuned by either micelle structures such as the composition of the mixture or external parameters such as pH.

Effect of chain conformational change on micelle structures: experimental studies and molecular dynamics simulations.

The effect of chain conformation change on the self-assembly behavior of poly(gamma-benzyl- l-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) was studied both experimentally by transmission electron microscopy, laser light scattering, and circular dichroism and computationally using molecular dynamics (MD) simulation. It was found that, by introducing trifluoroacetic acid to the PBLG-b-PEG solution, the conformation of the PBLG chain transforms from alpha-helix to random coil, which results in a change of the micelle structures formed by PBLG-b-PEG from rod to sphere. Meanwhile, the MD simulations were performed by using Brownian dynamics on the self-assembly behavior of model AB-type diblock copolymers with various chain rigidities of the A-block. The results show that, by decreasing the fraction of rigid chain conformation of the A-block, which corresponds to the helix-coil transition in the PBLG-b-PEG sample, the aggregate structure transforms from rod to sphere. The MD simulations also provide chain packing information in the micelles. On the basis of both experimental and MD simulation results, the mechanism regarding the effect of the conformation change of the polypeptide block copolymer on its self-association behavior is suggested.

Micelle formation and drug release behavior of polypeptide graft copolymer and its mixture with polypeptide block copolymer.

Self-association behavior of polypeptide graft copolymer and its mixture with polypeptide block copolymer and drug carrier capability of the formed micelles was examined. The results gained through fluorescence spectroscopy, transmission electron microscopy and nuclear magnetic resonance spectroscopy revealed that both polypeptide graft copolymer and its mixture with polypeptide block copolymer can self-assemble to form polymeric micelles in aqueous media. The molecular structure of the graft copolymer and blending the graft with block copolymer exert marked effects on the critical micelle concentration and the shape of formed micelles. It was found that the hydrophobic inner core of the micelles formed either by graft copolymer or mixture of graft and block copolymers can act as an incorporation site for the hydrophobic drugs. The drug loading content of the graft copolymer micelles tends to be larger when the content of the polypeptide segments in the copolymer increases. The results obtained from the drug-release studies showed that the drug-release rates are dependent on the chemical nature of the graft copolymer, the composition of the graft and block copolymer mixture, and also the pH value of the release media.

Calcium phosphate cement reinforced by polypeptide copolymers.

Water-based calcium phosphate with bone repairing capability was reinforced by polypeptide graft copolymers and micelles that were formed by polypeptide copolymers. The mechanical studies showed that the compression strength and fracture energy of the calcium phosphate cement (CPC)/polypeptide composites are appreciably higher than those of CPC. The molecular structure of the polypeptide graft copolymers and the association form of the polypeptide copolymers exhibit a marked effect on the mechanical properties of CPC/polypeptide composites. The polypeptide copolymers with more hydrophilic side chains and with core-shell micelle forms have more effective reinforcement effect. The morphological studies based on the scanning electron microscope (SEM) observations revealed that both polypeptide graft copolymers and polypeptide copolymer micelles are well dispersed in CPC matrix. According to the obtained experimental results, reinforcement mechanism was suggested.