Osseointegration of implants with superhydrophilic surfaces in rats with high serum levels of nicotine.

This study aimed to evaluate the effect of nicotine administration on the osseointegration of a superhydrophilic implants surface on rat tibiae. Thirty-two rats were used and divided into 2 groups according to the administration or not of nicotine: HH - Installation of implants with superhydrophilic surfaces in healthy animals; and HN - Installation of implants with superhydrophilic surfaces in animals subjected to nicotine administration. The animals were euthanized 15 and 45 days after implant placement (n = 8). Osseointegration was assessed by means of biomechanical analyses (removal torque), microcomputed tomography (volume of bone around the implants- %BV/TV), and histomorphometry (bone-implant contact -%BIC and the bone area between implant threads -%BBT). The animals subject to the nicotine administration presented lower removal torque than the control animals at the 45-day period (21.88 ± 2.80 Ncm vs. 17.88 ± 2.10 Ncm). The implants placed in the control rats presented higher %BIC (54.26 ± 6.59% vs. 39.25 ± 4.46%) and %BBT (50.57 ± 5.28% vs. 32.25 ± 5.24%) than the implants placed in nicotine animals at 15-day period. The nicotine administration reduces the osseointegration at 15 days, however, the superhydrophilic surface equalized the osseointegration in nicotine-exposed animals compared with healthy animals after 45 days of implant placement.

Osseointegration of implants with superhydrophilic surfaces in rats with high serum levels of nicotine

Abstract This study aimed to evaluate the effect of nicotine administration on the osseointegration of a superhydrophilic implants surface on rat tibiae. Thirty-two rats were used and divided into 2 groups according to the administration or not of nicotine: HH - Installation of implants with superhydrophilic surfaces in healthy animals; and HN - Installation of implants with superhydrophilic surfaces in animals subjected to nicotine administration. The animals were euthanized 15 and 45 days after implant placement (n = 8). Osseointegration was assessed by means of biomechanical analyses (removal torque), microcomputed tomography (volume of bone around the implants- %BV/TV), and histomorphometry (bone-implant contact -%BIC and the bone area between implant threads -%BBT). The animals subject to the nicotine administration presented lower removal torque than the control animals at the 45-day period (21.88 ± 2.80 Ncm vs. 17.88 ± 2.10 Ncm). The implants placed in the control rats presented higher %BIC (54.26 ± 6.59% vs. 39.25 ± 4.46%) and %BBT (50.57 ± 5.28% vs. 32.25 ± 5.24%) than the implants placed in nicotine animals at 15-day period. The nicotine administration reduces the osseointegration at 15 days, however, the superhydrophilic surface equalized the osseointegration in nicotine-exposed animals compared with healthy animals after 45 days of implant placement.

Resumo O objetivo deste estudo foi avaliar o efeito da administração de nicotina na osseointegração de implantes com superfície modificada por jateamento de oxidos e ataque ácido instalados em tíbia de ratos. Foram utilizados 32 ratos que foram divididos em 2 grupos de acordo com a administração ou não de nicotina: HH - Instalação de implantes com superfícies superhidrofílicas em animais sadios; e HN - Instalação de implantes com superfícies superhidrofílicas em animais submetidos à administração de nicotina. Os animais foram eutanasiados 15 e 45 dias após a colocação do implante (n = 8). A osseointegração foi avaliada por meio de análises biomecânicas (torque de remoção), microtomografia (volume de osso ao redor dos implantes - %BV/TV) e histomorfometrica (contato osso-implante -%BIC e área óssea entre roscas do implante -%BBT). Os animais submetidos à administração de nicotina apresentaram menor torque de remoção do que os animais controle no período de 45 dias (21,88 ± 2,80 Ncm vs. 17,88 ± 2,10 Ncm). Os implantes colocados nos ratos controle apresentaram maiores %BIC (54,26 ± 6,59% vs. 39,25 ± 4,46%) e %BBT (50,57 ± 5,28% vs. 32,25 ± 5,24%) do que os implantes colocados nos animais submetidos a administração de nicotina no período de 15 dias. A administração de nicotina prejudicou a osseointegração no período de 15 dias. Entretanto, a superfície superhidrofílica equalizou a osseointegração em animais expostos à nicotina em comparação com animais saudáveis após 45 dias da colocação do implante.

Comparação de diferentes metodologias para análise histométrica de implantes: estudo em ratos / Comparison of different methodologies for histometric analysis of implant. Study in rat

Introdução: Diferentes metodologias tem sido utilizadas para avaliação histológica da osseointegração, levando a diferentes resultados. Objetivo: O objetivo é comparar diferentes metodologias de análise histomorfométrica da osseointegração de implantes com diferentes superfícies, instalados em tíbias de ratos. Material e método: 24 ratos foram aleatoriamente divididos em 3 grupos (n = 8) para a instalação dos implantes. Esses grupos foram divididos de acordo com o tipo de implante instalado na tíbia: Grupo Hidrofílico - HFL (instalação de implante com superfície modificada por jateamento de óxidos e ataque ácido e mantida em solução de cloreto de sódio), Grupo Hidrofóbico - HFB (instalação de implante com superfície modificada por jateamento de óxidos e ataque ácido) e Grupo Usinado - U (instalação de implante com superfície usinada). No período de 45 dias após os procedimentos cirúrgicos de instalação dos implantes, os animais foram submetidos à eutanásia, e as tíbias foram removidas, sendo realizado o processamento histológico para amostras não descalcificadas. Após a obtenção das lâminas, foi realizada a análise histomorfométrica para avaliar as porcentagens de contato osso-implante (% BIC) e da área óssea entre as espiras (% BBT). As mensurações foram realizadas em duas diferentes regiões: 1) as roscas do implante na região do osso cortical e 2) todas as roscas do implante inseridas no osso (cortical e medular). A análise estatística foi feita por meio de ANOVA One-Way, seguida pelo teste de Tukey para análise inferencial dos dados. Resultado: Quando o BIC e o BBT foram analisados de forma independente nas regiões cortical e trabecular/total, observou-se uma diferença no comportamento histológico dos implantes de acordo com o tratamento de superfície. Os implantes HFL apresentaram BIC (%) trabecular 16,85% maior (p = 0,02) do que os implantes HFB e 26,12% maior (p ≤ 0,0001) do que os implantes usinados. Contudo, a região cortical de todos os grupos apresentou valores de BIC cortical significativamente maiores ao redor dos implantes, independentemente da superfície. Conclusão: Os resultados obtidos demonstraram que a formação óssea peri-implantar foi superior nas análises realizadas apenas em osso cortical, se comparados aos valores obtidos na mensuração total (osso cortical somado ao medular). Também foi possível observar que, dentro da mesma superfície, os valores de BIC (%) foram superiores em osso cortical. Em relação às limitações do estudo, pode-se concluir que diferentes metodologias de análise histométrica da osseointegração ao redor de diferentes superfícies de implantes instalados em tíbias de ratos podem interferir nos resultados de osseointegração, independentemente da superfície analisada.

Introduction: Different methodologies were used for histological evaluation of osseointegration, leading to different results. Objective: The objective is to compare different methodologies for histomorphometric analysis of the osseointegration of implants with different surfaces, installed in rat tibias. Material and method: Twenty-four rats were randomly divided into 3 groups (n=8) for implant installation. These groups were divided according to the type of implant that will be installed in the tibia: Hydrophilic Group (installation of an implant with a surface modified by oxide blasting and acid attack and maintained in a sodium chloride solution), Hydrophobic Group (installation of an implant with surface modified by oxide blasting and acid attack) and Machined Group (implant installation with machined surface). Within 45 days after the surgical procedures to install the implants, the animals were euthanized and the tibias were removed, and histological processing was carried out for non-decalcified samples. After obtaining the slides, histomorphometric analysis was performed to evaluate the percentages of bone-implant contact (%BIC) and the bone area between the turns (%BBT). Measurements were carried out in two different regions: 1) the implant threads in the cortical bone region and 2) all implant threads inserted into the bone (cortical and medullary). Statistical analysis was performed using One-Way ANOVA followed by Tukey's test for inferential data analysis. Result: The BIC and BBT were analyzed independently in the cortical and trabecular/total regions, a difference was observed in the histological behavior of the implants according to the surface treatment. HFL implants showed trabecular BIC (%) 16.85% higher (p=0.02) than HFB implants and 26.12% higher (p≤0.0001) than machined implants. However, the cortical region of all groups showed significantly higher cortical BIC values around the implants, regardless of the surface. Conclusion: the results obtained demonstrated that peri-implant bone formation was superior in analyzes carried out only on cortical bone, compared to the values obtained in the total measurement (cortical bone plus medullary bone). It was also possible to observe that, even within the same surface, the BIC(%) values were higher in cortical bone. Within the limitations of the study, it can be concluded that different methodologies for histometric analysis of osseointegration around different surfaces of implants installed in rat tibias can interfere with the results of osseointegration regardless of the surface analyzed

Effects of red and infrared laser on post extraction socket repair in rats subjected to alendronate therapy

Abstract This study evaluated the effect of photobiomodulation therapy (PBMT) with a red or infrared laser on the repair of post extraction sockets in rats administered alendronate (ALN). Forty male rats were randomly allocated into four groups: Control Group (CTR): subcutaneous administration of saline solution throughout the experimental period; Alendronate Group (ALN): subcutaneous administration of alendronate during the entire experimental period; Alendronate/Red Laser Group (ALN/RL): administration of ALN and irradiation with a GaAlAs laser (λ 660 nm); and Alendronate/Infrared Laser Group (ALN/IRL): administration of ALN and irradiation with a GaAlAs laser (λ 830 nm). The first lower molars were extracted 60 days after the beginning of the administration of the drugs. The PBMT was applied after tooth extraction (7 sessions with intervals of 48 hours between sessions). Thirty days after tooth extraction, the animals were euthanized. Micro-CT and histometric analysis were performed to assess the bone healing and soft tissue repair of the tooth socket. The ALN group presented with more bone than the CTR; however, most of this bone was necrotic. ALN does not affect the bone microarchitecture. On the other hand, PBMT with IRL enhances the bone density due to the increase in the number and reduction in the spacing of the trabeculae. The amount of vital bone and connective tissue matrix was higher in the ALN/RL and ALN/IRL groups than in the ALN and CTR groups. PBMT enhanced the healing of the post extraction sockets in rats subjected to ALN administration. Furthermore, IRL improved the new bone microarchitecture.

Implants with hydrophilic surfaces equalize the osseointegration of implants in normo- and hyperglycaemic rats

Abstract The purpose of this study was to evaluate the effect of a surface modified by blasting and acid attack and maintained in an isotonic solution compared to a machined surface on osseointegration in normo- and hyperglycaemic animals. Sixty-four animals were allocated into 4 groups with 16 animals each, and they were subdivided into two experimental periods (15 and 45 days), with 8 animals in each group. The groups were divided according to the type of implant that was installed in the animals' tibia and the animals' systemic condition: CM - Machined implants placed in Healthy animals; CH - Hydrophilic implants placed in Healthy animals, HM - Machined implants placed in animals with hyperglycaemia; HH- Hydrophilic implants installed in animals with hyperglycaemia. The following analyses were performed: biomechanical (removal torque), microtomographic (evaluation of the bone volume around the implants- BV/TV), and histomorphometric (evaluation of bone-implant contact BIC% and of the bone formation area between the threads BBT%). It was found that the implants with hydrophilic surfaces presented higher removal torques and quantities of BV/TV% and higher BIC% and BBT% values in normo- and hyperglycaemic animals. The results of this study indicated that the hydrophilic surface accelerates the osseointegration process (~ 15% BIC/BBT at 15-day period), especially in animals with hyperglycaemia. The hydrophilic surface equaled the osseointegration between normo- and hyperglycaemic animals, reversing the negative potential of hyperglycaemia on the osseointegration process.

Resumo O objetivo deste foi o de avaliar o efeito de uma superfície modificada por jateamento e ataque ácido e mantida em solução isotônica em comparação a uma superfície lisa sobre a osseointegração de implantes em animais hiperglicêmicos. No estudo foram utilizados 64 ratos, que foram divididos em 4 grupos com 16 animais em cada, e que foram avaliados em dois períodos experimentais (15 e 45 dias), com 8 animais em cada grupo. Os grupos foram divididos de acordo com o tipo de implante que foi instalado na tíbia dos animais e a condição sistêmica dos mesmos: Grupo CM - Implantes maquinados instalados em animais saudáveis; Grupo CH - Implantes maquinados instalados em animais com hiperglicemia; Grupo HM - Implantes hidrofílicos instalados em animais saudáveis, Grupo HH- Implantes hidrofílicos instalados em animais com hiperglicemia. Foram realizadas análises: biomecânicas (contra torque de remoção dos implantes), histométricas (avaliação do contato do osso com os implantes e da área de formação óssea entre as roscas) e microtomográfica (avaliação da área óssea ao redor dos implantes). Foi verificado que os implantes com superfície hidrofílica apresentaram maiores torques de remoção, quantidade de osso ao redor dos implantes e maiores valores de %BIC e %BBT em animais normo e hiperglicêmicos. Conclui-se que a superfície hidrofílica acelera o processo de osseointegração (~15% de %BIC/%BBT aos 15 dias), especialmente em animais com hiperglicêmicos. A superfície hidrofílica igualou a osseointegração entre animais normo- e hiperglicêmicos, revertendo o potencial negativo da hiperglicemia no processo de osseointegração.

Comparison of osseointegration in areas grafted with different osteoconductive biomaterials. Preclinical study

Abstract This study evaluated osseointegration in areas grafted with deproteinized bovine bone (DBB) and biphasic ceramic based on hydroxyapatite and beta-tricalcium phosphate (HA/TCP) in rat tibias. Noncritical bone defects were made in the tibias of 28 rats that were randomly assigned to 2 groups: DBB: DBB-filled defects and HA/TCP: HA/TCP-filled defects. Bone defects were made in the tibias bilaterally and filled with biomaterials. After 60 days, the implants were inserted, and the animals were euthanized 15 and 45 days after the implants were installed. Osseointegration was evaluated by biomechanical, microtomographic and histometric analysis. Implants installed in the defects filled with DBB presented higher removal torque forces (2.33 ± 0.51 Ncm vs. 1.50 ± 0.54 Ncm) and mineralized tissue volume around implants at 15 days (34.96 ± 3.68 % vs. 25.61 ± 2.95 %) and greater bone-implant contact (20.87 ± 8.28 % vs. 11.52 ± 7.42 %) and bone area within implant threads (26.83 ± 12.35 % vs. 11.98 ± 7.56 %) at 45 days compared to the measurements of implants in areas grafted with HA/TCP. Implants installed in defects in areas grafted with DBB had a better osseointegration pattern than implants placed in defects in areas grafted with HA/TCP.

Resumo Este estudo avaliou a osseointegração em áreas enxertadas com osso bovino desproteinizado (DBB) e cerâmica bifásica à base de hidroxiapatita e beta-fosfato tricálcico (HA / TCP) em tíbias de ratos. Defeitos ósseos não críticos foram feitos nas tíbias de 28 ratos que foram divididos aleatoriamente em 2 grupos: DBB: defeitos preenchidos com DBB e HA / TCP: defeitos preenchidos com HA / TCP. Defeitos ósseos foram confeccionados nas tíbias bilateralmente e preenchidos com biomateriais. Após 60 dias, os implantes foram instalados e os animais sacrificados 15 e 45 dias após a instalação dos implantes. A osseointegração foi avaliada por análises biomecânica, microtomográfica e histométrica. Os implantes instalados nos defeitos preenchidos com DBB apresentaram maiores forças de torque de remoção (2,33 ± 0,51 Ncm vs. 1,50 ± 0,54 Ncm) e volume de tecido mineralizado ao redor dos implantes aos 15 dias (34,96 ± 3,68% vs. 25,61 ± 2,95%) e maior contato osso-implante (20,87 ± 8,28% vs. 11,52 ± 7,42%) e área de osso dentro das roscas do implante (26,83 ± 12,35% vs. 11,98 ± 7,56%) no período de 45 dias em comparação com os implantes em áreas enxertadas com HA / TCP. Implantes instalados em áreas enxertadas com DBB apresentaram melhor padrão de osseointegração do que implantes colocados em áreas enxertadas com HA / TCP.

Avaliação da perda óssea utilizando diferentes parâmetros na análise microtomográfica: estudo em ratos / Bone loss assessment using different parameters in the microtomographic analysis: study in rats

Introdução: o desafio no uso do Micro-Ct tem sido estabelecer e padronizar padrões adequados para escaneamento e tratamento das imagens, para que se obtenha o máximo desempenho do equipamento, e permitir a comparação dos achados entre diferentes estudos. Objetivo: o presente estudo tem como objetivo comparar a porcentagem de volume ósseo em regiões com perda óssea periodontal utilizando diferentes metodologias para definição da área a ser analisada (ROI). Material e método: dez ratos foram submetidos à indução de doença periodontal, e, após a eutanásia, as mandíbulas foram escaneadas com cortes de 9 µ e 18 µm de espessura, com passo de rotação de 0.3mm. As imagens foram reconstituídas utilizando o software NRecon, e em seguida, utilizando o software CTAnalyser - CTAn, foram definidas as áreas de interesse (ROI) ao redor dos segundos molares. A primeira área de interesse (ROI1) foi definida em um padrão retangular que se restringiu às regiões interproximais e furca, onde a área total de tecido ósseo foi obtida somando os resultados dos 3 ROIs. A segunda área (ROI2) foi definida no sentido corono/apical ao redor do segundo molar até suas limitações proximais com os dentes vizinhos, onde a porcentagem de tecido ósseo pertencente às raízes foram excluídas das avaliações. As análises foram realizadas com cinco diferentes valores de thresholds (130-50, 130-60, 130-70, 130-80, 130-90 e 130-100). Resultado: a análise entre os diferentes ROIs demonstrou que em ambas as análises foi observada a tendência a menor porcentagem de tecido ósseo quanto maior o contraste de tons de cinza utilizado, no entanto, nos resultados obtidos no ROI2 essa diferença não foi estatisticamente significante. Conclusão: com os resultados obtidos pode se concluir que a utilização de diferentes thresholds para quantificação óssea, em áreas onde houve doença periodontal, pode trazer resultados divergentes; a definição da área de interesse interfere com os resultados obtidos e que a obtenção de uma área de interesse com a remoção das raízes mostrou-se menos susceptível à variação dos parâmetros de escaneamento.

Introduction: the challenge in the use of Micro-Ct has been to establish and standardize adequate standards for scanning and image processing to obtain the maximum performance of the equipment and to allow the comparison of findings between different studies. Objective: this study aims to compare the percentage of bone volume in regions with periodontal bone loss using different methodologies to define the area to be analysed (ROI). Material and method: ten rats were submitted to periodontal disease induction, and, after euthanasia, the mandibles were scanned with slices of 9µ and 18 µm thickness, with a rotation step of 0.3mm. The images were reconstructed using the NRecon software, and then, using the CTAnalyser - CTAn software, the areas of interest (ROI) around the second molars were defined. The first area of interest (ROI1) was defined in a rectangular pattern that was restricted to the interproximal and furcation regions, where the total area of bone tissue was obtained by adding the results of the 3 ROIs. The second area (ROI2) was defined in the coronal/apical direction around the second molar to its proximal limitations with the neighboring teeth, in which the percentage of bone tissue belonging to the roots was excluded from the evaluations. Analyses were performed with five different threshold values (130-50, 130-60, 130-70, 130-80, 130-90, and 130-100). Result: the analysis between the different ROIs showed that, in both analyses, there was a tendency towards a lower percentage of bone tissue the greater the grayscale contrast used. However, in the results obtained in ROI2, this difference was not statistically significant. Conclusion: with the results obtained, it can be concluded that the use of different thresholds for bone quantification, in areas where there was a periodontal disease, can bring divergent results; the definition of the area of ​​interest interferes with the results obtained; and that obtaining an area of interest with the removal of the roots, proved to be less susceptible to the variation of the scanning parameters.

LASER in periodontal treatment: is it an effective treatment or science fiction?

There are several studies that evaluate the use of lasers in periodontal treatment in non-surgical or surgical therapy. However, while several studies showed clinically beneficial effects of some lasers in periodontal treatment, there are few clinical reports of additional advantages of lasers as adjunctive treatments in periodontology. The aim of this paper is to demonstrate and critically analyze the level of scientific evidence of effects of low-level lasers and high-power lasers in periodontology. A narrative review of the studies was carried out in each topic and type of laser or periodontal treatment. In nonsurgical periodontal therapy the results showed that there is an additional clinical benefit when using a diode laser (DL) associated with scaling and root planing (SRP) in patients with moderate to severe periodontitis. The Er:YAG laser seems to be the most suitable for nonsurgical periodontal therapy and promotes the same clinical effects as conventional therapy. In periodontal surgery vaporization of the gingival or mucosal tissue can be carried out with DL, CO2, Nd:YAG, Er:YAG and Er,Cr:YSGG lasers. Photobiomodulation (PBM), mediated by low-level lasers associated with non-surgical periodontal therapy, promotes additional benefits in the short term and accelerates the bone and gingival tissue repair process and also reduces postoperative symptoms of periodontal surgery. The effect of antimicrobial Photodynamic Therapy is relevant in the initial reevaluation periods. Studies have shown controversial results of the use of lasers in periodontics, and this fact may be due to the lack of standard parameters of irradiation in each clinical application.

In vivo effectiveness of hybrid membranes with osteogenic growth peptide for bone regeneration.

Guided bone regeneration (GBR) technique helps to restore bone tissue through cellular selectivity principle. Currently no osteoinductive membrane exists on the market. Osteogenic growth peptide (OGP) acts as a hematopoietic stimulator. This association could improve the quality of bone formation, benefiting more than 2.2 million patients annually. The objective of this work was to develop membranes from ureasil-polyether materials containing OGP. The membranes were characterized by differential scanning calorimetry (DSC) and small angle X-ray scattering (SAXS). OGP was synthesized by the solid phase method. Sterilization results using gamma radiation at 24 kGy did not change the structure of the material, as confirmed by DSC. The SAXS technique revealed the structural homogeneity of the matrix. OGP was incorporated in 66.25 × 10-10  mol and release results showed that the ureasil-PPO400/PEO500 and ureasil-PPO400/PEO1900 membranes released 7% and 21%, respectively, after 48 h. In vivo results demonstrated that the amount and quality of bone tissue formed in the bone defects in the presence of ureasil-polyether membranes with OGP were similar to commercial collagen material with BMP. The results allow us to conclude that membranes with OGP have characteristics that make them potential candidates for the GBR.

Effect of different low-level intensity laser therapy (LLLT) irradiation protocols on the osseointegration of implants placed in grafted areas

Abstract Objective To evaluate the effect of different protocols of low-level intensity laser therapy (LLLT) irradiation on the osseointegration of implants placed in grafted areas. Methodology 84 rats were randomly allocated into six groups: DBB: defect filled with deproteinized bovine bone; HA/TCP: defect filled with biphasic ceramic of hydroxyapatite/β-tricalcium phosphate ; DBB-LI: defect filled with DBB and treated with LLLT after implant placement; HA/TCP-LI: defect filled with HA/TCP and treated with LLLT after implant placement; DBB-LIB: defect filled with DBB and treated with LLLT after graft procedure and implant placement; and HA/TCP-LIB: defect filled HA/TCP and treated with LLLT after graft procedure and implant placement. The bone defects were made in the tibia and they were grafted. After 60 days, the implants were placed. The rats were subsequently subjected to euthanasia 15 and 45 days after implant placement. The pattern of osseointegration and bone repair in the grafted area was evaluated by biomechanical, microtomographic, and histometric analyses. Furthermore, the expression of bone biomarker proteins was assessed. Results The LLLT groups presented higher removal torque, mineralized tissue volume, and a greater degree of osseointegration, especially when LLLT was performed only after implant placement, and these findings were associated with higher expression of BMP2 and alkaline phosphatase. Conclusion LLLT performed on implants placed in grafted areas enhances the osseointegration process.

LASER in periodontal treatment: is it an effective treatment or science fiction?

Abstract There are several studies that evaluate the use of lasers in periodontal treatment in non-surgical or surgical therapy. However, while several studies showed clinically beneficial effects of some lasers in periodontal treatment, there are few clinical reports of additional advantages of lasers as adjunctive treatments in periodontology. The aim of this paper is to demonstrate and critically analyze the level of scientific evidence of effects of low-level lasers and high-power lasers in periodontology. A narrative review of the studies was carried out in each topic and type of laser or periodontal treatment. In nonsurgical periodontal therapy the results showed that there is an additional clinical benefit when using a diode laser (DL) associated with scaling and root planing (SRP) in patients with moderate to severe periodontitis. The Er:YAG laser seems to be the most suitable for nonsurgical periodontal therapy and promotes the same clinical effects as conventional therapy. In periodontal surgery vaporization of the gingival or mucosal tissue can be carried out with DL, CO2, Nd:YAG, Er:YAG and Er,Cr:YSGG lasers. Photobiomodulation (PBM), mediated by low-level lasers associated with non-surgical periodontal therapy, promotes additional benefits in the short term and accelerates the bone and gingival tissue repair process and also reduces postoperative symptoms of periodontal surgery. The effect of antimicrobial Photodynamic Therapy is relevant in the initial reevaluation periods. Studies have shown controversial results of the use of lasers in periodontics, and this fact may be due to the lack of standard parameters of irradiation in each clinical application.

Alendronate Impairs Healing of Calvaria Critical Defects After Bone Graft With Different Bone Substitute Materials.

PURPOSE: The aim of this preclinical study was to evaluate the healing of critical-sized defects (CSDs) in the calvarial bone of rats grafted with deproteinized bovine bone graft (DBB) and with a combination of hydroxyapatite (HA) and ß-tricalcium phosphate (TCP) and bisphosphonate treatment. MATERIALS AND METHODS: Eighty-four animals were randomly divided into 2 groups according to the type of solution administered: the control group (CTR, saline solution) and the test group (alendronate [ALD]; sodium alendronate-50 µg/kg/day). Medications were administered via oral gavage starting 15 days before the surgical procedure until the end of the experiment. A CSD (5 mm in diameter) was made in the calvaria of each animal, and the rats were randomly allocated to 3 subgroups according to the biomaterial used to fill the defect: coagulum, DBB, and HA/TCP. The animals were sacrificed 15 and 60 days after the surgical procedure (n = 7 animals/period/subgroup). Microcomputed tomography was used to evaluate the percentage of mineralized tissues (volume). The amount of newly formed bone and remaining bone substitute material in the calvaria were analyzed by histomorphometry. RESULTS: There were no differences between the CTR and ALD groups with regard to the volume of mineralized tissues. The DBB and HA/TCP subgroups of CTR animals presented a significant increase in newly formed bone compared with these subgroups of ALD animals after 60 days of healing. CONCLUSIONS: Collectively, our findings indicate that the use of oral ALD reduced bone formation in CSD in the calvaria of rats grafted with DBB and HA/TCP.

Minimally Invasive Surgery for Clinical Crown Lengthening Using Piezoelectric Ultrasound.

This case report is aimed at describing a flapless, minimally invasive clinical crown lengthening with an osteotomy performed using a piezoelectric ultrasound. A female patient complained about the amount of gum that was exposed when she smiled, which caused aesthetic discomfort. After a clinical examination, it was confirmed that the patient had excessive gum exposure in the upper arch of the dental region for teeth 14 to 24 when she smiled. The tomographic exam showed that bone tissue was at the level of the enamel-cementum junction, and gingival tissue covered a part of the anatomic crown. Virtual analysis using digital smile design (DSD) demonstrated that enlarging the clinical crowns would provide better aesthetics. The excess gingival tissue was removed from the gingival margin region with the aid of a mockup without interference to the interdental papillae. Then, osteotomy was performed using piezoelectric ultrasound until there was a 2.5 mm distance from the top of the bone crest to the new gingival margin. In the postoperative period, good repositioning of the gingival margin, absence of postoperative complications, and rapid healing of the gingival tissue were verified. After 6 months, a good aesthetic outcome was observed with stability in the level of the periodontal tissues obtained via the crown-lengthening technique. It can be concluded that the minimally invasive clinical crown-lengthening technique was effective in repositioning the gingival margin with no postoperative complications.

Cyclosporine A impairs bone repair in critical defects filled with different osteoconductive bone substitutes

Abstract The aim of this study was to assess the influence of cyclosporine administration on the repair of critical-sized calvaria defects (CSDs) in rat calvaria filled with diverse biomaterials. Sixty animals were divided into two groups: the control (CTR) group (saline solution) and the cyclosporine (CCP) group (cyclosporine, 10 mg/kg/day). These medications were administered daily by gavage, beginning 15 days before the surgical procedure and lasting until the day the animals were euthanized. A CSD (5 mm Ø) was made in the calvaria of each animal, which was allocated to one of 3 subgroups, according to the biomaterial used to fill the defect: coagulum (COA), deproteinized bovine bone (DBB), or biphasic calcium phosphate ceramics of hydroxyapatite and β-phosphate tricalcium (HA/TCP). Euthanasia of the animals was performed 15 and 60 days after the surgical procedure (n = 5 animals/period/subgroup). Bone repair (formation) assessment was performed through microtomography and histometry, while the analyses of the expression of the BMP2, Osteocalcin, and TGFβ1 proteins were performed using immunohistochemistry. The CSDs not filled with biomaterials demonstrated lower bone formation in the CCP group. At 15 days, less bone formation was observed in the CSDs filled with DBB, a smaller volume of mineralized tissue was observed in the CSDs filled with HA/TCP, and the expression levels of BMP2 and osteocalcin were lower in the CCP group compared to the CTR group. The use of cyclosporine impaired bone repair in CSD, and this effect can be partially explained by the suppression of BMP2 and osteocalcin expression.

Cyclosporine A impairs bone repair in critical defects filled with different osteoconductive bone substitutes

Abstract The aim of this study was to assess the influence of cyclosporine administration on the repair of critical-sized calvaria defects (CSDs) in rat calvaria filled with diverse biomaterials. Sixty animals were divided into two groups: the control (CTR) group (saline solution) and the cyclosporine (CCP) group (cyclosporine, 10 mg/kg/day). These medications were administered daily by gavage, beginning 15 days before the surgical procedure and lasting until the day the animals were euthanized. A CSD (5 mm Ø) was made in the calvaria of each animal, which was allocated to one of 3 subgroups, according to the biomaterial used to fill the defect: coagulum (COA), deproteinized bovine bone (DBB), or biphasic calcium phosphate ceramics of hydroxyapatite and β-phosphate tricalcium (HA/TCP). Euthanasia of the animals was performed 15 and 60 days after the surgical procedure (n = 5 animals/period/subgroup). Bone repair (formation) assessment was performed through microtomography and histometry, while the analyses of the expression of the BMP2, Osteocalcin, and TGFβ1 proteins were performed using immunohistochemistry. The CSDs not filled with biomaterials demonstrated lower bone formation in the CCP group. At 15 days, less bone formation was observed in the CSDs filled with DBB, a smaller volume of mineralized tissue was observed in the CSDs filled with HA/TCP, and the expression levels of BMP2 and osteocalcin were lower in the CCP group compared to the CTR group. The use of cyclosporine impaired bone repair in CSD, and this effect can be partially explained by the suppression of BMP2 and osteocalcin expression.

Effect of avocado/soybean unsaponifiables on periodontal repair in rats with arthritis and induced periodontitis.

OBJECTIVE: This study aimed to evaluate the effect of avocado/soybean unsaponifiables (ASU) on periodontal repair in rats with induced periodontitis and arthritis. METHODOLOGY: Forty-five rats were submitted to periodontitis induction by insertion of ligatures into the upper second molars, maintained for 15 days. These animals were randomly allocated to 3 groups according to the presence of induced arthritis (ART) and the application of the ASU: Control (CTR) group-healthy animals, where saline solution was administered; ART-animals with induced arthritis, where saline solution was administered; ART/ASU-animals with induced arthritis, where ASU (0.6 mg/ kg) was administered. The drugs were administered daily by gavage and the animals were euthanized after 7, 15 and 30 days of the ligature removal. Bone resorption, inflammatory infiltrate composition and marker proteins expression of the differentiation and formation of osteoclasts (RANKL and TRAP) were assessed. RESULTS: The ART/ASU group presented higher bone volume than the ART group at 7 and 30 days after the ligature removal. Furthermore, the ART group presented higher quantity of inflammatory cells and expression of TRAP and RANKL than the other groups. CONCLUSION: ASU administration improves the repair of periodontal tissues in an experimental periodontitis model in rats with induced arthritis.

Esthetic crown lengthening in the treatment of gummy smile.

The aim of this article was to evaluate 1 year after surgery a surgical protocol that included gingivectomy and an apically positioned flap plus osseous resective surgery to correct excessive gingival display (EGD) in patients with altered passive eruption (APE) of the maxillary anterior teeth. Six female patients aged 18 to 22 years were diagnosed with APE type 1B. Surgical crown lengthening with flap surgery and bone recontouring was performed to achieve the biologic width. Photographic images were analyzed to evaluate the stable improvement of crown length before the procedure (baseline), immediately after surgery (immediate postoperative), and at 3 and 12 months postsurgery. Moreover, a lip repositioning procedure was also performed in one case to complement the periodontal therapy. Compared with baseline, an increase of 1.6 mm in the mean tooth crown height was observed in the photographic analysis at 12 months. A minimal difference was observed between the mean tooth crown height immediate postoperative and at 12 months, which indicates stability of the gingival margin. In conclusion, the surgical protocol outlined in this article describing esthetic crown lengthening for the treatment of APE/gummy smile resulted in predictable outcomes and stability of the gingival margin 1 year after surgery.

Effects of an Er,Cr:YSGG Laser on Bone Regeneration in Critical-Sized Calvarial Defects of Rats Exposed to Inhalation of Cigarette Smoke.

Objective: To evaluate the effect of the Er,Cr:YSGG laser on healing of critical-sized calvarial defects (CSDs) in rats submitted to inhalation of cigarette smoke. Background: Smoking has been implicated with the delay in the bone healing after osteotomy procedures, then the use of the Er,Cr:YSGG laser for osteotomy in smokers could be an alternative to the conventional drills. Methods: One hundred animals were randomly allocated into four groups: trephine-the CSDs were made with a trephine drill in healthy rats; Er,Cr:YSGG-the CSDs were made with the Er,Cr:YSGG laser in healthy rats; Trephine-S-the CSDs were made with a trephine drill in rats exposed to cigarette smoke; and Er,Cr:YSGG-S-the CSDs were made with the Er,Cr:YSGG laser in rats exposed to cigarette smoke. The inhalation of cigarette smoke started 7 days before the surgical procedure until euthanasia (immediately, 7, 15, 30, or 60 days after the surgical procedure). A histometric analysis and a histological description were performed to evaluate (1) the residual linear lengths and bone formation in the CSDs; (2) the quality of bone healing. Results: The use of Er,Cr:YSGG laser induces more bone formation compared with the trephine in smokers; however, the closure of the CSD was only superior in the Er,Cr:YSGG-S group compared to the Trephine-S group at the 60-day period. Conclusions: The use of the Er,Cr:YSGG laser stimulated the bone repair process after osteotomy procedures in animals submitted to exposure of inhalation of cigarette smoke.

Effect of avocado/soybean unsaponifiables on periodontal repair in rats with arthritis and induced periodontitis

Abstract Objective: This study aimed to evaluate the effect of avocado/soybean unsaponifiables (ASU) on periodontal repair in rats with induced periodontitis and arthritis. Methodology: Forty-five rats were submitted to periodontitis induction by insertion of ligatures into the upper second molars, maintained for 15 days. These animals were randomly allocated to 3 groups according to the presence of induced arthritis (ART) and the application of the ASU: Control (CTR) group-healthy animals, where saline solution was administered; ART-animals with induced arthritis, where saline solution was administered; ART/ASU-animals with induced arthritis, where ASU (0.6 mg/ kg) was administered. The drugs were administered daily by gavage and the animals were euthanized after 7, 15 and 30 days of the ligature removal. Bone resorption, inflammatory infiltrate composition and marker proteins expression of the differentiation and formation of osteoclasts (RANKL and TRAP) were assessed. Results: The ART/ASU group presented higher bone volume than the ART group at 7 and 30 days after the ligature removal. Furthermore, the ART group presented higher quantity of inflammatory cells and expression of TRAP and RANKL than the other groups. Conclusion: ASU administration improves the repair of periodontal tissues in an experimental periodontitis model in rats with induced arthritis.

Bone repair induced by different bone graft substitutes in critical-sized defects in rat calvaria / Avaliação do reparo ósseo induzido por diferentes substitutos ósseos em modelo de defeito crítico de calvária de ratos

Abstract Introduction The use of bone substitutes in grafting procedures as an alternative of the use of autogenous bone graft has been indicated, however, the direct comparison between these biomaterials has been little explored. Objective To evaluate the effect of different osteoconductive bone substitutes on the bone repair in critical-sized defects (CSDs) in rat calvaria. Material and method One CSD with an 8 mm diameter was made in each of the 40 rats used in this study. The animals were randomly allocated into 5 groups (n=8), according to the type of bone substitute used to fill the CSD: COA (Coagulum); AUT (autogenous bone); DBB (deproteinized bovine bone graft); HA/TCP (biphasic ceramic composed of hydroxyapatite and β-phosphate tricalcium); and TCP (β-phosphate tricalcium). A microtomographic analysis was performed to evaluate the remaining defect linear length (DLL) of the CSD and the volume of the mineralized tissues (MT) within the CSD at 3, 7, 15 and 30 days after the surgical procedure. In addition, a histometric analysis was performed to evaluate the composition of the repaired bone tissue (% Bone and % Biomaterial) at the 30-day period. Result It was shown that the COA had the lowest DLL and MT within the CSD. In addition, the COA presented the highest % of bone in CSD. The DBB had a higher MT and a higher % of bone substitute particles in the CSD than the AUT and TCP groups. The DBB and AUT groups presented higher % of bone in the CSD than the TCP group. Conclusion The use of the DBB promoted a better pattern of bone volume gain and formation compared to TCP and HA / TCP but was biologically inferior to the AUT.

Resumo Introdução A utilização de substitutos ósseos em procedimentos de enxertia de forma alternativa ao uso do osso autógeno tem sido indicada, entretanto a comparação direta entre esses biomateriais tem sido pouco explorada. Objetivo Avaliar o efeito de diferentes biomateriais osteocondutores sobre o reparo de defeitos críticos em calvárias (DCC) de ratos. Material e método Foram utilizados 40 ratos que foram submetidos a confecção de um DCC com 8 mm de diâmetro. Os animais foram aleatoriamente divididos em 5 grupos com 8 animais, de acordo com o tipo de biomaterial utilizado para preencher os DCC: Grupo COA (coágulo); Grupo AUT (osso autógeno); Grupo OBD (osso bovino desproteinizado); Grupo HA/ TCP (cerâmica bifásica composta de hidroxiapatita e β fosfato tricálcio); Grupo TCP (β fosfato tricálcio). Foram executadas análise microtomográfica para avaliação do comprimento linear remanescente (DLL) do DCC e o volume dos tecidos mineralizados (MT) dentro do DCC nos períodos de 3, 7, 15 e 30 dias após cirurgia. Adicionalmente, foi executado análise histométrica para avaliar a composição do tecido ósseo reparado (% Osso e % Biomaterial) no período de 30 dias. Resultado O grupo COA apresentou o menor DLL e MT dentro do DCC e maior % osso do que os outros grupos. O grupo OBD apresentou maior volume de tecidos mineralizados e maior % biomaterial do que o grupo os grupos AUT e TCP. Os grupos OBD e AUT apresentaram maior % osso que o grupo TCP. Conclusão O OBD promoveu melhor padrão de aumento de disponibilidade óssea e qualidade do osso reparado em comparação ao TCP e HA/TCP, porém biologicamente inferior ao grupo AUT.