Efficient actinide sequestration with ionic liquid-based extraction chromatography resins containing Aza-crown ether functionalized diglycolamides.

Two new extraction chromatographic resins (ECRs) were prepared by impregnating two exotic diglycolamide (DGA) ligands (having three or four DGA moieties tethered to aza-crown ether scaffolds) dissolved in an ionic liquid onto an inert solid support. A room temperature ionic liquid (RTIL) was used for enhancing the performance of the ECRs. The ECR containing triaza-9-crown-3 functionalized with three DGA moieties (TAM-3-DGA), and tetraaza-12-crown-4 tethered with four DGA arms (TAM-4-DGA) were evaluated for the separation of Am3+ and Pu4+from nitric acid solutions. The resin capacity for Eu3+ was 9.52 mg/g and 7.24 mg/g for TAM-3-DGA and TAM-4-DGA resins, respectively. Similarly, the resin capacity for Pu4+was 7.44 mg/g and 5.72 mg/g for TAM-3-DGA and TAM-4-DGA resins, respectively. These maximum loading values corresponded to the formation of a 1:1 metal/ligand complex for the Eu3+ ion and a 1:2 metal/ligand complex for the Pu4+ ion. The sorption of Eu3+and Pu4+on the resins followed a chemisorption phenomenon on both resins. The sorbed Eu3+and Pu4+ions from the resin phase could be efficiently desorbed with complexing ligands such as guanidine carbonate/HEDTA and oxalic acid, respectively.

A comparative study on the uptake of lanthanides from acidic feeds using extraction chromatography resins containing N,N,N',N'-tetra-n-alkyl diglycolamides with varying alkyl chain lengths in an ionic liquid.

A comparative study on the uptake of several rare earth element (REE) ions viz. La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III) and Dy(III) was carried out from nitric acid feeds using four extraction chromatography resins which contained the diglycolamide (DGA) ligands, N,N,N',N'-tetra-n-alkyldiglycolamide with n-pentyl (TPDGA), n-hexyl (THDGA), n-octyl (TODGA) and n-decyl (TDDGA) groups taken in a room temperature ionic liquid (C4mim·NTf2). The uptake of the lanthanides followed the trend: La(III) < Ce(III) < Pr(III) < Nd(III) < Sm(III) < Gd(III) < Dy(III), which is similar to their ionic potential values and the uptake trend of the resins was TPDGA > THDGA > TODGA > TDDGA. The uptake of the metal ions was very high (>104 g/mL) for all the lanthanide ions and was found to increase with increasing nitric acid concentrations. Based on the encouraging batch data, column studies were carried out with all the four extraction chromatography resins with the lanthanide ions used in this work. The column studies were carried out with both individual lanthanide ions and their mixtures. While the loading studies were carried out with 80 mg/L solutions of the metal ions (with respect to each of those) in the mixture of REEs, the elution studies were carried out using a solution of 0.05 M EDTA in 1 M guanidine carbonate. For the column studies involving individual REEs, 550 mg/L solutions were used. The elution profiles appeared to be sharp as >95% elution of the metal ions was accomplished in only 3 mL of the eluent which amounted to only 1.6 bed volumes which is highly impressive. When the studies were carried out with the mixture of the lanthanide ions, the breakthrough of Dy(III) was last while that of La(III) was seen at much lower volumes which was dependent on the nature of the extractant in the resins.

Radiation stability of two extraction chromatography resin materials containing substituted diglycolamide ligands in an ionic liquid.

The radiation stability of two extraction chromatography resins containing diglycolamide ligands viz. TPDGA (N,N,N',N'-tetra-n-pentyl diglycolamide) and TODGA (N,N,N',N'-tetra-n-octyl diglycolamide) in a room temperature ionic liquid (C4mim.NTf2) was studied by exposing to gamma rays from a 60Co source. The resins were irradiated to varying gamma ray dose up to 1000 kGy where both the dry resins and wet resins (containing a fixed amount nitric acid in contact) were used. The performance assessment of the resins was done by physicochemical characterization as well as uptake studies; both by batch as well as column methods. The physicochemical characterization of the resins was done using FTIR analysis while the surface morphology of the resins was carried out by scanning electron microscopy. The uptake of the metal ions, typically that of Am(III) and Eu(III), representing the trivalent actinides and lanthanides was studied by batch method. The dry resins and those in contact with nitric acid yielded nearly identical results suggesting minimal effect of the radiolytic products of nitric acid on the resin performance. There was negligible change in the Kd values up to an absorbed dose of 300 kGy beyond which there was sharp decrease. However, the Kd values were still quite large even after an absorbed dose of 1000 kGy. The column performance of the irradiated resins was also assessed by the uptake and elution of Eu(III) ion and though loading was affected, the elution behavior was found to have insignificant effect.

Aggregation Behavior of Nitrilotriacetamide (NTAmide) Ligands in Thorium(IV) Extraction from Acidic Medium: Small-Angle Neutron Scattering, Fourier Transform Infrared, and Theoretical Studies.

Two tripodal amides obtained from nitrilotriacetic acid with n-butyl and n-octyl alkyl chains (HBNTA(LI) and HONTA(LII), respectively) were studied for the extraction of Th(IV) ions from nitric acid medium. The effect of the diluent medium, i.e., n-dodecane alone and a mixture of n-dodecane and 1-decanol, onto aggregate formation were investigated using small angle neutron scattering (SANS) studies. In addition, the influence of the ligand structure, nitric acid, and Th(IV) loading onto ligand aggregation and third-phase formation tendency was discussed.The LI/LII exist as monomers (aggregarte radius for LI: 6.0 Å; LII:7.4 Å) in the presence of 1-decanol, whereas LII forms dimers (aggregarte radius for LII:9.3 Å; LI does not dissolve in n-dodecane) in the absence of 1-decanol. The aggregation number increases for both the ligands after HNO3 and Th(IV) loading. The maximum organic concentration (0.050 ± 0.004 M) of Th(IV) was reached without third-phase formation for 0.1 M LI/LII dissolved in 20% isodecanol +80% n-dodecane. The interaction of 1-decanol with LII and HNO3/Th(IV) with amidic oxygens of LI/LII results in shift of carbonyl stretching frequency, as shown by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) studies. The structural and bonding information of the Th-LI/LII complex were derived from the density functional theoretical (DFT) studies. The molecular dynamics (MD) simulations suggested that the aggregation behavior of the ligand in the present system is governed by the population of hydrogen bonds by phase modifier around the ligand molecules. Although the theoretical studies suggested higher Gibbs free energy of complexation for Th4+ ions with LI than LII, the extraction was found to be higher with the latter, possibly due to the higher lipophilicity and solubility of the Th-LII aggregate in the nonpolar media.

Stability of composite polymeric beads containing a calix[4]arene-mono-crown-6 ligand for radio-cesium separation.

Bis-octyloxy-calix[4]arene-mono-crown-6 (BOCMC) is a selective ligand for Cs(I) cation, and has been used in solvent extraction method for its separation from acidic feed. Looking at the various advantages and ease of extraction chromatography separation method, an attempt was made to prepare stable composite beads containing BOCMC entrapped in a suitable polymeric matrix. Therefore, an attempt was made to prepare a series of composite polymeric beads containing BOCMC in polysulfone (PS), polyether sulfone (PES) and sodium alginate polymeric matrix. Preparations of the beads were attempted by dissolving the solid BOCMC in the polymer solution, and also by using the ligand solution in isodecanol/dodecane and ionic liquids and then mixing in the polymeric solution. Every attempt failed to get the desired quality of beads in PES and sodium alginate matrix. However, very good quality and stable beads were obtained when 25 mM ligand solution dissolved in C8mim.Tf2N ionic liquid was used in PS matrix. Detail study for the extraction chromatography separation of Cs(I) was studied with BOCMC/C8mim.Tf2N/PS composite beads. Detail investigations on the preparation, characterization, reusability and radiation stability of these beads have been studied and reported in details.

Highly efficient Plutonium(IV) uptake from acidic feeds using four extraction chromatography resins containing diglycolamides and ionic liquid.

Quantitative recovery of plutonium from lean effluents is one of the most challenging tasks for separation scientists. Four extraction chromatography (XC) resins containing substituted diglycolamide ligands viz. N,N,N',N'-tetra-n-pentyl diglycolamide (TPDGA), N,N,N',N'-tetra-n-hexyl diglycolamide (THDGA), N,N,N',N'-tetra-n-octyl diglycolamide (TODGA) and N,N,N',N'-tetra-n-decyl diglycolamide (TDDGA) and a room temperature ionic liquid (RTIL) were tested for the extraction of plutonium (IV) from nitric acid feed solutions. The relative efficiency of uptake of the metal ion in the entire range of HNO3 studied was: TPDGA > THDGA > TODGA > TDDGA, which was opposite to the chain length of the attached alkyl groups. Also, for all the four XC resins the uptake of Pu(IV) was found to decrease with increasing nitric acid concentration in the lower acidity range followed by an increase thereafter. The uptake of Pu(IV) with all the four XC resins was fitted into different kinetic and isotherm models. It was found that all the four resins followed the pseudo-second order kinetic model and Langmuir monolayer adsorption model. Column studies with these XC resins using a loading solution containing 1.2 g/L Pu(IV) in 3 M HNO3 showed early breakthrough for the higher homolog DGA ligands as compared to the lower homologs. Effective elution of the loaded Pu(IV) from the column was done in about 5.5 column volumes using a solution containing 0.5 M oxalic acid in 0.5 M HNO3.

Highly efficient plutonium scavenging by an extraction chromatography resin containing a tetraaza-12-crown-4 ligand tethered with four diglycolamide pendent arms.

An efficient extraction chromatography resin, containing tetraaza-12-crown-4 functionalized with four diglycolamide moieties, was evaluated for the separation of plutonium. This chromatography resin yielded very large distribution coefficients for Pu4+ (>105) in 0.5 - 6 M HNO3 feed solutions. Various physicochemical properties such as sorption kinetics, Pu4+ sorption mechanism, and its sorption capacity were investigated. The sorption kinetics, following a pseudo-second-order model, showed that about 10 minutes of equilibration was sufficient for >99.9% sorption of Pu4+. The sorption of Pu4+ on the resin followed the Langmuir monolayer model, which was confirmed by a theoretical calculation based on the kinetic model. The Pu4+ sorption on the resin was driven by a large exothermic enthalpy change (ΔH = -31.4±2.2 kJ/mol) and a positive entropy change (ΔS = 224±15 J/mol/L). The resin could sorb a maximum of 12.1±0.8 mg of Pu per gram of resin, which is equivalent to 1:2 metal/ligand complex on the resin. The Pu4+ from the resin phase was completely stripped with 0.5 M oxalic acid. A possible application of this resin for the separation / pre-concentration of Pu4+ was successfully demonstrated in the column mode.

Selective uptake of thorium(IV) from nitric acid medium using two extraction chromatographic resins based on diglycolamide-calix[4]arenes: Application to thorium-uranyl separation in an actual sample.

Two novel extraction chromatography resins (ECRs) containing two diglycolamide (DGA) -functionalized calix[4]arenes with n-propyl and isopentyl substituents at the amide nitrogen atom, termed as ECR-1 and ECR-2, respectively, were evaluated for the uptake of Th(IV) from nitric acid feed solutions. While both the resins were having a quite high Th(IV) uptake ability (Kd >3000 at 3 M HNO3), the uptake was relatively lower with the resin containing the isopentyl DGA, which appeared magnified at lower nitric acid concentrations. Kinetic modeling of the sorption data suggested fitting to the pseudo-second order model pointing to a chemical reaction during the uptake of the metal ion. Sorption isotherm studies were carried out showing a good fitting to the Langmuir and D-R isotherm models, suggesting the uptake conforming to monolayer sorption and a chemisorption model. Glass columns with a bed volume of ca. 2.5 mL containing ca. 0.5 g lots of the ECRs were used for studies to assess the possibility of actual applications of the ECRs. Breakthrough profiles obtained with feed containing 0.7 g/L Th(NO3)3 solution resulted in breakthrough volumes of 8 and 5 mL, respectively, for the ECR-1 and ECR-2 resins. Near quantitative elution of the loaded metal ion was possible using a solution of oxalic acid and nitric acid. A method for the separation of Th-234 from natural uranium was demonstrated for the possible application of ECR-1.

Two novel extraction chromatographic resins containing benzene-centered tripodal diglycolamide ligands: Actinide uptake, kinetic modeling and isotherm studies.

Two novel extraction chromatographic resins (EC), termed as RL-1 and RL-2, were prepared by impregnating two benzene-centered tripodal iglycolamide ligands (Bz-T-DGA) containing different spacer groups where the ligands are termed as L-1 and L-2, respectively. They were employed for the uptake of actinide and fission product ions, viz. Am3+, Eu3+, UO22+, Np4+, Pu4+, Sr2+, and Cs+, from acidic feeds. Weight distribution coefficient (Kd) values were measured by the batch method and the loaded metal ions were back extracted using a 0.01 M EDTA solution at pH 4. Kinetic modeling of the sorption data of Am(III) on both resins suggested pseudo-second order rate kinetics with rate constants of 1.68 × 10-6 and 2.47 × 10-6 g/cpm.min for the resins containing L-1 and L-2, respectively. Sorption isotherm studies indicated the Langmuir monolayer chemisorption phenomenon with Eu(III) experimentally determined saturation uptake capacities of 6.02 ± 0.11 and 5.49 ± 0.14 mg per g of RL-1 and RL-2 resins, respectively. As the batch uptake study results appeared encouraging, column studies were also carried out using both resins. The resin reusability data indicated a marginal change in the Kd values for the RL-1 resin up to three repeat runs beyond which a steady decrease of the Kd value was seen. On the other hand, in the case of RL-2 a steady decrease in the Kd values was observed for three repeat runs beyond which there was marginal change.

Evaluation of two aza-crown ether-based multiple diglycolamide-containing ligands for complexation with the tetravalent actinide ions Np4+ and Pu4+: extraction and DFT studies.

Two multiple diglycolamide (DGA)-containing extractants where the DGA arms are tethered to the nitrogen atoms of two aza-crown ether scaffolds, a 9-membered aza-crown ether containing three 'N' atoms (LI) and a 12-membered aza-crown ether containing four 'N' atoms (LII), were evaluated for the extraction of the tetravalent actinide ions Np4+ and Pu4+. The tripodal ligand with three DGA arms (LI) was relatively inferior in its metal ion extraction properties as compared to the tetrapodal ligand with four DGA arms (LII) and Pu4+ ion was better extracted than Np4+ ion with both the ligands. A solvation extraction mechanism, where species of the type ML(NO3)4 are extracted, was found to be operative for both the ligands involving both the tetravalent actinide ions. While the extraction of the metal ions increased with the feed nitric acid concentration up to 4 M, a sharp decline in the extraction was seen after that. Quantitative extraction (>99%) of the actinide ions was observed with LII from 4 M HNO3, suggesting the possible application of the ligands for actinide partitioning of high-level waste. The structure and the composition of the complexes were optimized by DFT computations.

Effect of an alkyl substituent and spacer length in benzene-centered tripodal diglycolamides on the sequestration of minor actinides.

Three benzene-centered tripodal diglycolamide (Bz-T-DGA) ligands, where diglycolamide (DGA) moieties are tethered to the central benzene ring through a methylene spacer and having either a hydrogen atom (LI) or an isopentyl group (LII) attached to the N-atom, and DGA moieties attached via an ethylene spacer and having an isopentyl group attached to the N-atom (LIII), were studied for their complexation and extraction abilities towards trivalent actinides and lanthanides. The distribution ratio of Am(iii) and Eu(iii) with 1 mmol L-1 ligand in 5% iso-decanol/n-dodecane followed the order: LII > LIII > LI. The substitution of the H atom with the isopentyl group on the N-atom of the DGA moieties resulted in two orders of magnitude enhancement in the extraction ability of the ligand. On the other hand, increase in the spacer length between the benzene ring and the DGA moieties resulted in several fold reduction in the extraction ability of the ligand. Spectroscopic studies with Eu3+ ions in acetonitrile also confirmed the metal/ligand complex formation constant in the order: LII > LIII > LI. Luminescence decay lifetimes of Eu3+/ligand complexes confirmed the absence of water molecules and that all the primary coordination sites of the metal ion are occupied by the ligands.