Adeno-Associated Virus-Encapsulated Alginate Microspheres Loaded in Collagen Gel Carriers for Localized Gene Transfer.

This work reports localized in vivo gene transfer by biodegradation of the adeno-associated virus-encapsulating alginate microspheres (AAV-AMs) loaded in collagen gel carriers. AAV-AMs are centrifugally synthesized by ejecting a mixed pre-gel solution of alginate and AAV to CaCl2 solution to form an ionically cross-linked hydrogel microsphere immediately. The AAV-AMs are able to preserve the AAV without diffusing out even after spreading them on the cells, and the AAV is released and transfected by the degradation of the alginate microsphere. In addition, AAV-AMs can be stored by cryopreservation until use. By implanting this highly convenient AAV-encapsulated hydrogel, AAV-AMs can be loaded into collagen gel carriers to fix the position of the implanted AAV-AMs and achieve localized gene transfer in vivo. In vivo experiments show that the AAV-AMs loaded in collagen gel carriers are demonstrated to release the encapsulated AAV for gene transfer in the buttocks muscles of mice. While conventional injections caused gene transfer to the entire surrounding tissue, the biodegradation of AAV-AMs shows that gene transfer is achieved locally to the muscles. This means that the proposed AAV-loaded system is shown to be a superior method for selective gene transfer.

Controlled release of adeno-associated virus from alginate hydrogel microbeads with enhanced sensitivity to ultrasound.

Adeno-associated virus (AAV)-based gene therapy holds promise as a fundamental treatment for genetic disorders. For clinical applications, it is necessary to control AAV release timing to avoid an immune response to AAV. Here we propose an ultrasound (US)-triggered on-demand AAV release system using alginate hydrogel microbeads (AHMs) with a release enhancer. By using a centrifuge-based microdroplet shooting device, the AHMs encapsulating AAV with tungsten microparticles (W-MPs) are fabricated. Since W-MPs work as release enhancers, the AHMs have high sensitivity to the US with localized variation in acoustic impedance for improving the release of AAV. Furthermore, AHMs were coated with poly-l-lysine (PLL) to adjust the release of AAV. By applying US to the AAV encapsulating AHMs with W-MPs, the AAV was released on demand, and gene transfection to cells by AAV was confirmed without loss of AAV activity. This proposed US-triggered AAV release system expands methodological possibilities in gene therapy.

A Novel Rat Model of Embolic Cerebral Ischemia Using a Cell-Implantable Radiopaque Hydrogel Microfiber.

The failure of neuroprotective treatment-related clinical trials, including stem cell therapies, may be partially due to a lack of suitable animal models. We have developed a stem cell-implantable radiopaque hydrogel microfiber that can survive for a long time in vivo. The microfiber is made of barium alginate hydrogel containing zirconium dioxide, fabricated in a dual coaxial laminar flow microfluidic device. We aimed to develop a novel focal stroke model using this microfiber. Using male Sprague-Dawley rats (n=14), a catheter (inner diameter, 0.42 mm; outer diameter, 0.55 mm) was navigated from the caudal ventral artery to the left internal carotid artery using digital subtraction angiography. A radiopaque hydrogel microfiber (diameter, 0.4 mm; length, 1 mm) was advanced through the catheter by slow injection of heparinized physiological saline to establish local occlusion. Both 9.4-T magnetic resonance imaging at 3 and 6 h and 2% 2,3,5-triphenyl tetrazolium chloride staining at 24 h after stroke model creation were performed. Neurological deficit score and body temperature were measured. The anterior cerebral artery-middle cerebral artery bifurcation was selectively embolized in all rats. Median operating time was 4 min (interquartile range [IQR], 3-8 min). Mean infarct volume was 388 mm3 (IQR, 354-420 mm3) at 24 h after occlusion. No infarction of the thalamus or hypothalamus was seen. Body temperature did not change significantly over time (P = 0.204). However, neurological deficit scores before and at 3, 6, and 24 h after model creation differed significantly (P < 0.001). We present a novel rat model of focal infarct restricted to the middle cerebral artery territory using a radiopaque hydrogel microfiber positioned under fluoroscopic guidance. By comparing the use of stem cell-containing versus non-containing fibers in this stroke model, it would be possible to determine the efficacy of "pure" cell transplantation in treating stroke.

Near-Infrared-Triggered On-Demand Controlled Release of Adeno-Associated Virus from Alginate Hydrogel Microbeads with Heat Transducer for Gene Therapy.

Gene therapy using adeno-associated virus (AAV) has potential as a radical treatment modality for genetic diseases such as sensorineural deafness. To establish clinical applications, it is necessary to avoid immune response to AAV by controlled release system of AAV. Here, a near-infrared (NIR)-triggered on-demand AAV release system using alginate hydrogel microbeads with a heat transducer is proposed. By using a centrifuge-based microdroplet shooting device, the microbeads encapsulating AAV with Fe3 O4 microparticles (Fe3 O4 -MPs) as a heat transducer are fabricated. Fe3 O4 -MPs generated heat by NIR enhanced the diffusion speed of the AAV, resulting in the AAV being released from the microbeads. By irradiating the microbeads encapsulating fluorescent polystyrene nanoparticles (FP-NPs) (viral model) with NIR, the fluorescence intensity decreased only for FP-NPs with a diameter of 20 nm and not for 100 or 200 nm, confirming that this system can release virus with a diameter of several tens of nanometers. By irradiating NIR to the AAV-encapsulating microbeads with Fe3 O4 -MPs, the AAV is released on demand, and gene transfection to cells by AAV is confirmed without loss of viral activity. The NIR-triggered AAV release system proposed in this study increases the number of alternatives for the method of drug release in gene therapy.

Cell-encapsulated chitosan-collagen hydrogel hybrid nerve guidance conduit for peripheral nerve regeneration.

Nerve guidance conduits (NGCs) composed of biocompatible polymers have been attracting attention as an alternative for autograft surgery in peripheral nerve regeneration. However, the nerve tissues repaired by NGCs often tend to be inadequate and lead to functional failure because of the lack of cellular supports. This paper presents a chitosan-collagen hydrogel conduit containing cells to induce peripheral nerve regeneration with cellular support. The conduit composed of two coaxial hydrogel layers of chitosan and collagen is simply made by molding and mechanical anchoring attachment with holes made on the hydrogel tube. A chitosan layer strengthens the conduit mechanically, and a collagen layer provides a scaffold for cells supporting the axonal extension. The conduits of different diameters (outer diameter approximately 2-4 mm) are fabricated. The conduit is bioabsorbable with lysozyme, and biocompatible even under bio absorption. In the neuron culture demonstration, the conduit containing Schwann cells induced the extension of the axon of neurons directed to the conduit. Our easily fabricated conduit could help the high-quality regeneration of peripheral nerves and contribute to the nerve repair surgery.

Effect of Cyclic Stretch on Tissue Maturation in Myoblast-Laden Hydrogel Fibers.

Engineering of the skeletal muscles has attracted attention for the restoration of damaged muscles from myopathy, injury, and extraction of malignant tumors. Reconstructing a three-dimensional muscle using living cells could be a promising approach. However, the regenerated tissue exhibits a weak construction force due to the insufficient tissue maturation. The purpose of this study is to establish the reconstruction system for the skeletal muscle. We used a cell-laden core-shell hydrogel microfiber as a three-dimensional culture to control the cellular orientation. Moreover, to mature the muscle tissue in the microfiber, we also developed a custom-made culture device for imposing cyclic stretch stimulation using a motorized stage and the fiber-grab system. As a result, the directions of the myotubes were oriented and the mature myotubes could be formed by cyclic stretch stimulation.

Origami-based self-folding of co-cultured NIH/3T3 and HepG2 cells into 3D microstructures.

This paper describes an origami-inspired self-folding method to form three-dimensional (3D) microstructures of co-cultured cells. After a confluent monolayer of fibroblasts (NIH/3T3 cells) with loaded hepatocytes (HepG2 cells) was cultured onto two-dimensional (2D) microplates, degradation of the alginate sacrificial layer in the system by addition of alginate lyase triggered NIH/3T3 cells to self-fold the microplates around HepG2 cells, and then 3D cell co-culture microstructures were spontaneously formed. Using this method, we can create a large number of 3D cell co-culture microstructures swiftly with ease in the same time. We find that HepG2 cells confined in the 3D cell co-culture microstructures have an ability to enhance the secreted albumin compared to 2D system in a long culture period. The result indicates that the origami-based cell self-folding technique presented here is useful in regenerative medicine and the preclinical stage of drug development.

Neural stem/progenitor cell-laden microfibers promote transplant survival in a mouse transected spinal cord injury model.

Previous studies have demonstrated that transplantation of neural stem/progenitor cells (NS/PCs) into the lesioned spinal cord can promote functional recovery following incomplete spinal cord injury (SCI) in animal models. However, this strategy is insufficient following complete SCI because of the gap at the lesion epicenter. To obtain functional recovery in a mouse model of complete SCI, this study uses a novel collagen-based microfiber as a scaffold for engrafted NS/PCs. We hypothesized that the NS/PC-microfiber combination would facilitate lesion closure as well as transplant survival in the transected spinal cord. NS/PCs were seeded inside the novel microfibers, where they maintained their capacity to differentiate and proliferate. After transplantation, the stumps of the transected spinal cord were successfully bridged by the NS/PC-laden microfibers. Moreover, the transplanted cells migrated into the host spinal cord and differentiated into three neural lineages (astrocytes, neurons, and oligodendrocytes). However, the NS/PC-laden scaffold could not achieve a neural connection between the rostral end of the injury and the intact caudal area of the spinal cord, nor could it achieve recovery of motor function. To obtain optimal functional recovery, a microfiber design with a modified composition may be useful. Furthermore, combinatorial therapy with rehabilitation and/or medications should also be considered for practical success of biomaterial/cell transplantation-based approaches to regenerative medicine.

Metre-long cell-laden microfibres exhibit tissue morphologies and functions.

Artificial reconstruction of fibre-shaped cellular constructs could greatly contribute to tissue assembly in vitro. Here we show that, by using a microfluidic device with double-coaxial laminar flow, metre-long core-shell hydrogel microfibres encapsulating ECM proteins and differentiated cells or somatic stem cells can be fabricated, and that the microfibres reconstitute intrinsic morphologies and functions of living tissues. We also show that these functional fibres can be assembled, by weaving and reeling, into macroscopic cellular structures with various spatial patterns. Moreover, fibres encapsulating primary pancreatic islet cells and transplanted through a microcatheter into the subrenal capsular space of diabetic mice normalized blood glucose concentrations for about two weeks. These microfibres may find use as templates for the reconstruction of fibre-shaped functional tissues that mimic muscle fibres, blood vessels or nerve networks in vivo.

Cellular building unit integrated with microstrand-shaped bacterial cellulose.

In bottom-up tissue engineering, a method to integrate a pathway of nutrition and oxygen into the resulting macroscopic tissue has been highly desired, but yet to be established. This paper presents a cellular building unit made from microstrand-shaped bacterial cellulose (BC microstrand) covered with mammalian cells. The BC microstrands are fabricated by encapsulating Acetobacter xylinum with a calcium alginate hydrogel microtube using a double co-axial microfluidic device. The mechanical strength and porous property of the BC microstrands can be regulated by changing the initial density of the bacteria. By folding or reeling the building unit, we demonstrated the multiple shapes of millimeter-scale cellular constructs such as coiled and ball-of-yarn-shaped structures. Histological analysis of the cellular constructs indicated that the BC microstrand served as a pathway of nutrition and oxygen to feed the cells in the central region. These findings suggest that our approach facilitates creating functional macroscopic tissue used in various fields such as drug screening, wound healing, and plastic surgery.

Cellular microfabrication: observing intercellular interactions using lithographically-defined DNA capture sequences.

Previous reports have shown that synthetic DNA strands can be attached to the plasma membrane of living cells to equip them with artificial adhesion "receptors" that bind to complementary strands extending from material surfaces. This approach is compatible with a wide range of cell types, offers excellent capture efficiency, and can potentially be used to create complex multicellular arrangements through the use of multiple capture sequences. In this work, we apply an aluminum "lift off" lithography method to allow the efficient generation of complex patterns comprising different DNA sequences. The resulting surfaces are then demonstrated to be able to capture up to three distinct types of living cells in specific locations. The utility of this approach is demonstrated through the observation of patterned cells as they communicate by diffusion-based paracrine signaling. It is anticipated that the ability of this technique to create virtually any type of 2D heterogeneous cell pattern should prove highly useful for the examination of key questions in cell signaling, including stem cell differentiation and cancer metastasis.

A neurospheroid network-stamping method for neural transplantation to the brain.

Neural transplantation therapy using neural stem cells has received as potential treatments for neurodegenerative diseases. Indeed, this therapy is thought to be effective for replacement of degenerating neurons in restricted anatomical region. However, because injected neural stem cells integrate randomly into the host neural network, another approach is needed to establish a neural pathway between selective areas of the brain or treat widespread degeneration across multiple brain regions. One of the promising approaches might be a therapy using pre-made neural network in vitro by the tissue engineering technique. In this study, we engineered a three-dimensional (3D) tissue with a neuronal network that can be easily manipulated and transplanted onto the host brain tissue in vivo. A polydimethylsiloxane microchamber array facilitated the formation of multiple neurospheroids, which in turn interconnected via neuronal processes to form a centimeter-sized neurospheroid network (NSN). The NSN was transferable onto the cortical surface of the brain without damage of the neuronal network. After transfer onto the cortical tissue, the NSN showed neural activity for more than 8 days. Moreover, neurons of the transplanted NSN extended their axons into the host cortical tissue and established synaptic connections with host neurons. Our findings suggest that this method could lay the foundation for treating severe degenerative brain disease.

DNA-barcode directed capture and electrochemical metabolic analysis of single mammalian cells on a microelectrode array.

A microdevice is developed for DNA-barcode directed capture of single cells on an array of pH-sensitive microelectrodes for metabolic analysis. Cells are modified with membrane-bound single-stranded DNA, and specific single-cell capture is directed by the complementary strand bound in the sensor area of the iridium oxide pH microelectrodes within a microfluidic channel. This bifunctional microelectrode array is demonstrated for the pH monitoring and differentiation of primary T cells and Jurkat T lymphoma cells. Single Jurkat cells exhibited an extracellular acidification rate of 11 milli-pH min(-1), while primary T cells exhibited only 2 milli-pH min(-1). This system can be used to capture non-adherent cells specifically and to discriminate between visually similar healthy and cancerous cells in a heterogeneous ensemble based on their altered metabolic properties.