Portal Supply and Venous Drainage of the Caudate Lobe in the Healthy Human Liver: Virtual Three-Dimensional Computed Tomography Volume Study.

OBJECTIVE: The venous vascular anatomy of the caudate lobe is exceptional. The purpose of this study was to assess portal inflow and venous outflow volumes of the caudate lobe. METHODS: Extrahepatic (provided by the first-order branches) versus intrahepatic (provided by the second- to third-order branches) portal inflow, as well as direct (via Spieghel veins) versus indirect (via hepatic veins) venous drainage patterns were analyzed in virtual 3-D liver maps in 140 potential live liver donors. RESULTS: The caudate lobe has a greater intrahepatic than extrahepatic portal inflow volume (mean 55 ± 26 vs. 45 ± 26%: p = 0.0763), and a greater extrahepatic than intrahepatic venous drainage (mean 54-61 vs. 39-46%). Intrahepatic drainage based on mean estimated values showed the following distribution: middle > inferior (accessory) > right > left hepatic vein. CONCLUSIONS: Sacrifice of extrahepatic caudate portal branches can be compensated by the intrahepatic portal supply. The dominant outflow via Spieghel veins and the negligible role of left hepatic vein in caudate venous drainage may suggest reconstruction of caudate outflow via Spieghel veins in instances of extended left hemiliver live donation not inclusive of the middle hepatic vein. The anatomical data and the real implication for living donors must be further verified by clinical studies.

Liver remnant hypertrophy induction--how often do we really use it in the time of computer assisted surgery?

PURPOSE: To evaluate the significance of the hypertrophy concept in patients requiring extended liver resections for colorectal metastasis in the time of computer assisted surgery. METHODS: Retrospective analysis of patient collective undergoing major liver surgery. 2D CT, 3D CAS with Fraunhofer MeVis Sofware. Portal vein embolisation (PVE) with the Amplazer Plug, portal vein ligation (PVL) as 1. Stage operative procedure. RESULTS: 2D CT data identified 29 patients out of 319 (2002-2009) to be at risk for liver failure after resection. After 3D CAS analysis and virtual operation planning, only 7/29 were at true risk and were submitted to portal vein occlusion (PVO). Another 5 patients were submitted to the hypertrophy concept for intraoperative finding of insufficient parenchyma quality. In total, 12 patients underwent PVO (6 PVE/6 PVL). 9/12 patients went to stage 2 and were successfully operated. There was no difference in future remnant liver volume (FRLV) gain or waiting time to step 2 between the groups, though survival was better in the PVE group. CONCLUSION: PVO is an effective approach if the patient's future remnant liver (FRL) is too small on 2D CT volumetry. 3D CAS has great impact on the analysis of FRL capacity and in augmenting resectability - in our experience only patients with insufficient FRLV on the virtual resection plan have to take the risk of PVO to maintain the chance of liver resection.

Rapid image recognition of body parts scanned in computed tomography datasets.

AIM: Automatic CT dataset classification is important to efficiently create reliable database annotations, especially when large collections of scans must be analyzed. METHOD: An automated segmentation and labeling algorithm was developed based on a fast patient segmentation and extraction of statistical density class features from the CT data. The method also delivers classifications of image noise level and patient size. The approach is based on image information only and uses an approximate patient contour detection and statistical features of the density distribution. These are obtained from a slice-wise analysis of the areas filled by various materials related to certain density classes and the spatial spread of each class. The resulting families of curves are subsequently classified using rules derived from knowledge about features of the human anatomy. RESULTS: The method was successfully applied to more than 5,000 CT datasets. Evaluation was performed via expert visual inspection of screenshots showing classification results and detected characteristic positions along the main body axis. Accuracy per body region was very satisfactory in the trunk (lung/liver >99.5% detection rate, presence of abdomen >97% or pelvis >95.8%) improvements are required for zoomed scans. CONCLUSION: The method performed very reliably. A test on 1,860 CT datasets collected from an oncological trial showed that the method is feasible, efficient, and is promising as an automated tool for image post-processing.

[Three-dimensional reconstruction of central lung tumors based on CT data]. / Dreidimensionale Rekonstruktion von zentralen Lungentumoren basierend auf CT-Daten : Erste klinische Erfahrungen First clinical experiences.

BACKGROUND: CT scanning of the lungs is the standard procedure for preoperative evaluation of central lung tumors. The extent of the tumor and infiltration of central lung structures or lung segments are decisive parameters to clarify whether surgery is possible and the extent of resection. With computer-assisted methods for the segmentation of anatomical structures based on CT data (Fraunhofer MeVis, Bremen) an enhanced, three-dimensional selective visualization is now possible. PATIENTS AND METHODS: From August 2007 through June 2009, 22 patients with central lung tumors were treated at the department of thoracic surgery, University of Schleswig-Holstein, campus Lübeck. There were 15 males and 7 females with a mean age of 60.2 years (range 41-74 years), 18 patients had a long history of smoking, while 4 patients had never smoked. Of the patients 20 had a primary lung carcinoma, 1 patient had local recurrent lung cancer after lobectomy and 1 patient had a central lung metastasis from a non-pulmonary primary carcinoma. A multi-slice detector computer tomogram (MSDCT) scan was performed in all cases. All data were three-dimensionally reconstructed and visualized using special computer-aided software (Fraunhofer MeVis, Bremen). Pulmonary lung function tests, computed postoperative lung volume, bronchoscopic findings, general condition of the patients and the three-dimensionally reconstructed CT data were used for an individual risk analysis and surgical planning. RESULTS: According to the risk analysis 14 out of the 22 patients were surgically treated, 7 patients were staged as functionally inoperable and 1 as technically inoperable. A pneumonectomy was performed in 5 cases, a lobectomy/bilobectomy in 4 cases, an extended lobectomy in 3 cases and 1 case each of a wedge resection and a sleeve resection. Of the 14 patients 2 were classified as stage Ia/b, 7 patients as stage IIa/b and 5 patients as stage IIIa. The median length of time spent in hospital was 8.5±33 days and the mortality rate was 0%. The three-dimensional visualization of the tumor and its anatomical relationship to central pulmonary vessels and the airway system was feasible in all cases. The three-dimensional reconstruction was confirmed in all cases by surgical exploration. CONCLUSION: Three-dimensional reconstruction of CT scan data is a new and promising method for preoperative presentation and risk analysis of central lung tumors. The three-dimensional visualization with anatomical reformatting and color-coded segmentation enables the surgeon to make a more precise strategic approach for central lung tumors.

Ex situ quantification of the cooling effect of liver vessels on radiofrequency ablation.

PURPOSE: To quantify the cooling effect of hepatic vessels on liver radiofrequency (RF) ablation ex situ. METHODS: Bipolar RF applicators (diameter = 1.8 mm, electrode length = 30 mm) were inserted parallel to perfused glass tubes (diameter = 5 and 10 mm; flow = 250-1,800 ml/min) at distances of 5 and 10 mm in porcine livers ex vivo. RF ablation was performed at 30 W/15 kJ. RF lesions were analyzed by measuring the maximum (r (max)) and minimum radius (r (min)) and the lesion area. RESULTS: Glass tubes without flow showed no influence on RF lesions, whereas perfused glass tubes had a significant cooling effect on lesions. r (min) was reduced to 50% at 5 mm applicator-to-vessel distance and the lesion area was reduced from 407 to 321 mm(2) (p < 0.001). There was no significant influence of glass tube diameter or flow volume on any of the analyzed parameters. CONCLUSIONS: Cooling effects of intrahepatic vessels could be simulated in an ex situ model. Cooling effects should be taken into account in RF ablation within 10 mm distance to major liver vessels regardless of blood flow volume or vessel diameter. Surgical RF ablation with temporary blood flow occlusion should be considered in such constellations.

[Virtual hepatic surgery - computer-assisted operation planning on the 3-dimensional reconstructed liver]. / Virtuelle hepatobiliäre Chirurgie - computerunterstützte Resektionsplanung an der dreidimensional rekonstruierten Leber.

Recent developments in image-based computer assistance provide an improved visualisation of the intrahepatic vascular branching system in a virtual three-dimensional model of the liver, allowing a quantitative assessment of any vascular territory. The advantages of computer-assisted resection planning refer to a better preoperative assessment of functional resectability in areas at risk for either devascularisation or impaired drainage. In selected cases, this information may have a considerable influence on operative planning, especially with regard to the extent of resection or the need for vascular reconstruction. Due to the great anatomical variability of the intrahepatic branching patterns of the right liver lobe, this seems to be particularly important in extended left hepatectomies or in repeat hepatectomy when intrahepatic vascular anatomy may be altered. The development of navigation techniques to ensure the accurate application of the preoperative planned resection line is under investigation but not available yet.

[Generating statements at whole-body imaging with a workflow-optimized software tool--first experiences with multireader analysis]. / Befunderstellung bei der Ganzkörperbildgebung mittels einer workflowoptimierten Befundungssoftware--Erste Erfahrungen einer Multireader-Analyse.

INTRODUCTION: Due to technical innovations in sectional diagram methods, whole-body imaging has increased in importance for clinical radiology, particularly for the diagnosis of systemic tumor disease. Large numbers of images have to be evaluated in increasingly shorter time periods. The aim was to create and evaluate a new software tool to assist and automate the process of diagnosing whole-body datasets. MATERIAL AND METHODS: Thirteen whole-body datasets were evaluated by 3 readers using the conventional system and the new software tool. The times for loading the datasets, examining 5 different regions (head, neck, thorax, abdomen and pelvis/skeletal system) and retrieving a relevant finding for demonstration were acquired. Additionally a Student T-Test was performed. For qualitative analysis the 3 readers used a scale from 0 - 4 (0 = bad, 4 = very good) to assess dataset loading convenience, lesion location assistance, and ease of use. Additionally a kappa value was calculated. RESULTS: The average loading time was 39.7 s (+/- 5.5) with the conventional system and 6.5 s (+/- 1.4) (p < 0.01) with the new software tool. For the different regions (conventional system/new software tool), the time reduction for readers 1, 2, and 3 were as follows: in the head region 35.9 % (p < 0.01)/49.9 % (p < 0.01)/54.3 % (p < 0,01), in the neck region 48.5 % (p < 0.01)/52.6 % (p < 0.01)/59.4 % (p < 0.05), in the thorax region 59.1 % (p < 0.01)/56.2 % (p < 0.05)/62.1 % (p < 0.05), in the abdominal region 61.9 % (p < 0.01)/62.7 % (p < 0.05)/47.9 % (p < 0.01) and in the pelvis region 73.1 % (p < 0.01)/63.7 % (p < 0.05)/55 % (p < 0.01), respectively. 148.2 s (+/- 94.8) compared to 2.5 s (+/- 0.5) were required to retrieve a previously described finding (p < 0.01). With and without the new software tool the same number of metastases was found (p < 0.01, k > 0.9). The qualitative analysis showed a significant advantage with respect to convenience (p < 0.01, k > 0.9). CONCLUSION: Use of the new software can achieve a significant time savings when working with whole-body datasets with a constant quality of findings and a significant advantage with respect to convenience. As a result, the problem of evaluating examinations with thousands of images can be approached systematically.

Computer-assisted operative planning in adult living donor liver transplantation: a new way to resolve the dilemma of the middle hepatic vein.

An adequate venous outflow is essential for securing viability of both graft and remnant in adult living donor liver transplantation (ALDLT). Seventy-five potential live liver donors were evaluated for LDLT by means of an "all-in-one" CT, which defined the biliary tree, portal vein, hepatic artery, and hepatic vein anatomy. The acquired data sets were further analysed by means of the software HepaVision (MeVis, Germany). Only a minority (29%) of potential donors were found to have a vascular and biliary anatomy consistent with the classically described "normal" patterns. The vast majority (71%) had "anatomical variations". Thirty-nine (52%) donors underwent ALDLT hepatectomy. The right hepatic vein was dominant in 64 cases, representing 48 +/- 6% of the total liver volume (TLV). The middle hepatic vein was dominant in 11 cases, making up 40 +/- 8% of the TLV. The left hepatic vein was never dominant. The volume contribution of the middle hepatic vein (MHV) was 114-782 ml for the right and 87-419 ml for the left hemiliver. Computer-assisted planning allows for the 3D reconstruction of the vascular and biliary anatomy, automatic calculation of the total and territorial liver volumes, and risk analysis of hepatic vein dominance relationships. This comprehensive data acquisition supports preoperative evaluation and provides a high degree of safety for donors and improved outcomes for recipients.

Uncertainty in diffusion tensor based fibre tracking.

BACKGROUND: Diffusion tensor imaging and related fibre tracking techniques have the potential to identify major white matter tracts afflicted by an individual pathology or tracts at risk for a given surgical approach. However, the reliability of these techniques is known to be limited by image distortions, image noise, low spatial resolution, and the problem of identifying crossing fibres. This paper intends to bridge the gap between the requirements of neurosurgical applications and basic research on fibre tracking uncertainty. METHOD: We acquired echo planar diffusion tensor data from both 1.5 T and 3.0 T scanners. For fibre tracking, an extended deflection-based algorithm is employed with enhanced robustness to impaired fibre integrity such as caused by diffuse or infiltrating pathological processes. Moreover, we present a method to assess and visualize the uncertainty of fibre reconstructions based on variational complex Gaussian noise, which provides an alternative to the bootstrap method. We compare fibre tracking results with and without variational noise as well as with artificially decreased image resolution and signal-to-noise. FINDINGS: Using our fibre tracking technique, we found a high robustness to decreased image resolution and signal-to-noise. Still, the effects of image quality on the tracking result will depend on the employed fibre tracking algorithm and must be handled with care, especially when being used for neurosurgical planning or resection guidance. An advantage of the variational noise approach over the bootstrap technique is that it is applicable to any given set of diffusion tensor images. CONCLUSIONS: We conclude that the presented approach allows for investigating the uncertainty of diffusion tensor imaging based fibre tracking and might offer a perspective to overcome the problem of size underestimation observed by existing techniques.

Computerized CT-based 3D visualization technique in living related liver transplantation.

INTRODUCTION: For living donor liver transplantation (LDLT) accurate diagnostic workup is essential. Multiple imaging approaches are currently used. Problems arise in the assessment of vascular and bile duct anatomy, liver graft volume, and vascular territories involved. A 3D visualization system that improves anatomic assessment, allows interactive surgery planning, and acts as an intraoperative guide with enhanced precision is required. Refinements in computed tomography (CT) technology with the introduction of multidetector-row CT scanners and implementation of mathematical methods on computerized digital data has enabled CT-based 3D visualizations. MATERIALS AND METHODS: Sixteen LDLT candidates and three LDLT recipients were assessed by multislice CT examination. Image processing of the digital raw data for 3D visualization included segmentation and calculation of center lines. A hierarchical mathematical model representing the vascular and biliary tree was created. This allowed calculation of individual vascular territories. RESULTS: 3D CT-based visualization in LDLT facilitates diagnostic workup with high accuracy for analyses of vascular and bile duct variants, volumetry, and assessment of the optimal surgical splitting line of the living donor liver. Resultant areas of either arterial devascularization or venous congestion can be displayed and quantified preoperatively. The diagnostic method is of major impact on patient selection and directly influences intraoperative surgical guidance. The currently practiced "multiple imaging approach" approach, especially with regard to invasive diagnostics, can be avoided in the future.

Detection of tumour infiltration in axonal fibre bundles using diffusion tensor imaging.

We present a method for the detection and quantification of white matter infiltration from human brain tumours based on Diffusion Tensor Imaging (DTI). Since white matter destruction alters the local diffusion properties, DTI has the potential to sensitively detect tumour infiltration and to quantify the degree thereof. Here, we consider three tumour patients with gliomas, two with and one without contralateral tumour progress. We use DTI to identify specific fibre systems, where infiltration has to be assessed. On this basis, the problem of arbitrary region of interest definition is solved such that tumour infiltration can be reliably quantified in particular fibre bundles. It is demonstrated at the Corpus Callosum (CC) and the Pyramidal Tract (PT) that fibre bundle infiltration can be well detected by specific visualisation techniques of diffusion tensor data. Infiltration of the CC is quantified by using a reliable method for the determination of diffusion properties inside particular fibre bundles. For an age normalised quantification of white matter infiltration we introduce the Integrity Index, which measures the diffusion anisotropy inside an infiltrated fibre bundle normalised by the diffusion anisotropy in a specific region of healthy fibre tissue. It turns out that the quantification of CC infiltration correlates with contralateral tumour progression and has the potential to serve as a surrogate marker for this process, which is crucial for surgical therapy decisions and intervention planning.

A reliable and efficient method for cerebral ventricular volumetry in pediatric neuroimaging.

OBJECTIVES: Cerebral ventricular volume has the potential to become an important parameter in quantitative neurological diagnosis. However, no accepted methodology for routine clinical use exists to date. We sought a robust, reproducible, and fast technique to evaluate cerebral ventricular volume in young children. METHODS: We describe a novel volumetric methodology to segment and visualize intracerebral fluid spaces and to quantify ventricular volumes. The method is based on broadly available T1 weighted volumetric magnetic resonance (MR) imaging, an interactive watershed transform, and a fully automated histogram analysis. We evaluated this volumetric methodology with 34 clinical volumetric MR datasets from non-sedated children (age 6-7 y) with a history of prematurity and low birth weight (< or = 1500 g) obtained during a prospective study. RESULTS: The methodology, with adaptation for small ventricular size, was capable of evaluating all 34 of the pediatric datasets for cerebral ventricular volume. The method was a) robust for normal and pathological anatomy, b) reproducible, c) fast with less than five minutes for image analysis, and d) equally applicable to children and adults. CONCLUSIONS: Clinical brain ventricular volume calculations in non-sedated children can be performed using routine MR imaging besides efficient three-dimensional segmentation and histogram analysis with results that are robust and reproducible.

Analysis of mice tumor models using dynamic MRI data and a dedicated software platform*.

PURPOSE: To implement a software platform (DynaVision) dedicated to analyze data from functional imaging of tumors with different mathematical approaches, and to test the software platform in pancreatic carcinoma xenografts in mice with severe combined immunodeficiency disease (SCID). MATERIALS AND METHODS: A software program was developed for extraction and visualization of tissue perfusion parameters from dynamic contrast-enhanced images. This includes regional parameter calculation from enhancement curves, parametric images (e. g., blood flow), animation, 3D visualization, two-compartment modeling, a mode for comparing different datasets (e. g., therapy monitoring), and motion correction. We analyzed xenograft tumors from two pancreatic carcinoma cell lines (BxPC3 and ASPC1) implanted in 14 SCID mice after injection of Gd-DTPA into the tail vein. These data were correlated with histopathological findings. RESULTS: Image analysis was completed in approximately 15 minutes per data set. The possibility of drawing and editing ROIs within the whole data set makes it easy to obtain quantitative data from the intensity-time curves. In one animal, motion artifacts reduced the image quality to a greater extent but data analysis was still possible after motion correction. Dynamic MRI of mice tumor models revealed a highly heterogeneous distribution of the contrast-enhancement curves and derived parameters, which correlated with differences in histopathology. ASPC1 tumors showed a more hypervascular type of curves with faster and higher signal enhancement rate (wash-in) and a faster signal decrease (wash-out). BXPC3 tumors showed a more hypovascular type with slower wash-in and wash-out. This correlated with the biological properties of the tumors. CONCLUSION: With the described software, it was possible to analyze tissue perfusion parameters in small xenograft tumor models in mice. Our data correlated with histopathological data, and the qualitative and quantitative perfusion parameters could distinguish two tumor entities with different growth characteristics.

[Film-screen mammography versus digital storage plate mammography: hard copy and monitor display of microcalcifications and focal findings--a retrospective clinical and histologic analysis]. / Film-Folien-Mammographie versus digitale Mammographie mit Speicherfolien: Mikrokalzifikationen und Herdbefunde, Hartkopie- und Monitorbefundung--eine retrospektiv klinisch/histologische Analyse (n = 76).

PURPOSE: A retrospective clinical-histological study to determine the diagnostic accuracy of mammography using conventional screen-film cassettes (hard copy), high-resolution digital phosphor storage plates (hard copy) and monitor display (soft copy) for microcalcifications and focal lesions (BI-RADS (TM) category 4 or 5). MATERIALS AND METHODS: From April to November 2001, 76 patients underwent conventional film-screen mammography and, after diagnosis and preoperative wire localization, digital mammography with the same exposure parameters. Five investigators retrospectively determined the diagnosis after the operation from randomly distributed mediolateral views (hard-copy reading) and from the monitor display (soft-copy reading). These results were correlated with the final histology. RESULTS: The accuracy of conventional screen-film mammography, digital mammography and monitor-displayed mammography was 67%, 65% and 68% for all findings, (n = 76), 59%, 59% and 68% for microcalcifications (n = 44) and 75%, 72% and 63% for focal lesions (n = 32). The overall results showed no difference. CONCLUSION: Our findings indicate equivalence of conventional screen-film mammography, high-resolution digital phosphor storage plate mammography and monitor-displayed mammography.

[Acceptance of computer-assisted surgery planning in visceral (abdominal) surgery]. / Akzeptanz einer computergestützten Operationsplanung in der Viszeralchirurgie - Ergebnisse einer bundesweiten Befragung -

The acceptance of computer assisted surgical planning was studied by polling 500 German surgeons. 500 questionnaires were sent, from which 105 have been returned, from which 102 could be analysed. The questionnaire consisted of 14 questions relating to the current practice of surgery planning as well as to desired improvements. In general, the computer assisted surgical planning was assessed as a promising tool in the future. 82 % of the surgeons expected a benefit by computer assisted surgical planning. Better assessment of resectability, better training of residents and more safety of surgical procedures were mentioned in the majority. Computer assisted surgical planning should focus on 3D visualization of spatial relations between lesions and vascular structures, on facilities for the preoperative trial of resection strategies and on the documentation of the planned procedure. The current version of a research prototype (Surgery-Planner) is presented which is dealing with these goals.

[Concept and implementation of model projects for mammography screening in Germany]. / Konzept und Durchführung der Modellprojekte für Mammographiescreening in Deutschland.

The carriers of the German Statutory Health Care System have recognized that only mammographic screening according to the European Guidelines for the Quality Assurance of Mammography Screening will permit early detection of breast cancer with an acceptable risk/benefit ratio. In the German pilot projects, regional mammography screening programmes according to the European guidelines are being tested in the framework of the German health care system. The European guidelines require comprehensive quality assurance of all relevant steps in the chain of events involved in screening, from invitation on to therapy and follow-up. Such comprehensive quality assurance involves several medical specialities and other professional groups dealing with out-patient and in-patient health care and requires long-term cooperation with public institutions (population registries, cancer registries). The objective of the pilot projects is to test the organizational and legal conditions essential to introduction of a mammographic screening programme according to the European quality assurance guidelines in Germany.

[Individual planning of liver surgery interventions with a virtual model of the liver and its associated structures]. / Individuelle Planung leberchirurgischer Eingriffe an einem virtuellen Modell der Leber und ihrer Leitstrukturen.

BACKGROUND: In an interdisciplinary approach, HepaVision (MEVIS, Bremen), a software tool specifically developed for 3D visualization of the liver, was employed for individual planning of extensive liver resections and evaluation of living-relative donations. So far there is experience with more than 50 biphasic spiral CT examinations. RESULTS: The spatial relationship of large tumors to crucial hepatic structures, the demonstration and evaluation of anatomic variants regarding vascular supply and the risk stratification of liver failure by volumetric analysis on the basis of portal venous drainage supported precise indication for surgery. Surgical safety is increased by preoperative planning and simulation of necessary vessel reconstructions. By hiding selective areas of portal venous drainage or applying freely selectable clip planes, segmental as well as non-anatomical resections can be simulated and their effects analyzed. The virtual preoperative situs was confirmed intraoperatively in all 17 patients of our study population who underwent segmental liver resection for either a tumor or living-relative donation.

Scale-space signatures for the detection of clustered microcalculations in digital mammograms.

A method is described for the automated detection of microcalcifications in digitized mammograms. The method is based on the Laplacian scale-space representation of the mammogram only. First, possible locations of microcalcifications are identified as local maxima in the filtered image on a range of scales. For each finding, the size and local contrast is estimated, based on the Laplacian response denoted as the scale-space signature. A finding is marked as a microcalcification if the estimated contrast is larger than a predefined threshold which depends on the size of the finding. It is shown that the signature has a characteristic peak, revealing the corresponding image features. This peak can be robustly determined. The basic method is significantly improved by consideration of the statistical variation of the estimated contrast, which is the result of the complex noise characteristic of the mammograms. The method is evaluated with the Nijmegen database and compared to other methods using these mammograms. Results are presented as the free-response receiver operating characteristic (FROC) performance. At a rate of one false positive cluster per image the method reaches a sensitivity of 0.84, which is comparable to the best results achieved so far.

[3-dimensional (3-D) visualization of the liver for planning extensive liver resections]. / Dreidimensionale (3-D) Visualisierung der Leber zur Planung erweiterter Leberresektionen.

Preoperative planning of liver resections in patients with liver tumors is based on sonography, computed tomography and magnetic resonance imaging. A new three-dimensional (3D) visualization program was developed based on CT data. This visualization program was used for preoperative planning in 6 patients with liver tumors in problematic intrahepatic localizations. In 5 out of 6 patients the liver resection could be performed as preoperatively planned. The intraoperative findings agreed with the 3D visualization in all these patients. 3D Visualization of the liver allowed clear and interactive planning of liver resections and improved the preparation of complex liver resections.