Measurement of depth-dose of linear accelerator and simulation by use of Geant4 computer code.

Radiation therapy is an established method of cancer treatment. New technologies in cancer radiotherapy need a more accurate computation of the dose delivered in the radiotherapy treatment plan. This study presents some results of a Geant4-based application for simulation of the absorbed dose distribution given by a medical linear accelerator (LINAC). The LINAC geometry is accurately described in the Monte Carlo code with use of the accelerator manufacturer's specifications. The capability of the software for evaluating the dose distribution has been verified by comparisons with measurements in a water phantom; the comparisons were performed for percentage depth dose (PDD) and profiles for various field sizes and depths, for a 6-MV electron beam. Experimental and calculated dose values were in good agreement both in PDD and in transverse sections of the water phantom.

Radionuclide concentrations in the diet of residents in a high level natural radiation area in Iran.

Concentrations of 137Cs and 226Ra in the diet (foodstuffs and drinking water) of adult inhabitants in the high-level natural radiation area (HLNRA) of Ramsar, Iran have been determined. The annual intake of foodstuffs was estimated on the basis of their average annual consumption. Food samples collected from local markets were analyzed by means of a gamma spectrometer. The estimated annual dietary intakes of 137Cs and 226Ra were 130Bq and 245Bq, respectively. The concentrations of natural radionuclides in food and drinking water of the residents are higher than the world average, and are correlated with the high concentration of these radionuclides in soil and water. Calculations were also made to determine the potential dose to an individual consuming such diets.

An ideal blood mimicking fluid for doppler ultrasound phantoms.

In order to investigate the problems of detecting tumours by ultrasound it is very important to have a portable Doppler flow test object to use as a standardising tool. The flow Doppler test objects are intended to mimic the flow in human arteries. To make the test meaningful, the acoustic properties of the main test object components (tissue and blood mimic) should match closely the properties of the corresponding human tissues, while the tube should ideally have little influence. The blood mimic should also represent the haemodynamic properties of blood. An acceptable flow test object has been designed to closely mimic blood flow in arteries. We have evaluated the properties of three blood mimicking fluid: two have been described recently in the literature, the third is a local design. One of these has emerged as being particularly well matched to the necessary characteristics for in-vitro work.