Thermal Changes During Guided Flapless Implant Site Preparation: A Comparative Study.

PURPOSE: To compare intrabony thermal changes induced by two different protocols for guided implant surgery during the whole drilling procedure. MATERIALS AND METHODS: Two protocols for guided implant placement were evaluated in vitro using artificial bone cylinders. The control protocol provided traditional metal sleeves and a standard drilling sequence composed of four cylindrical triflute drills (cutting surface length = 16 mm). The test protocol provided a three-slot polyurethane sleeve and two cylindrical drills (second drill cutting surface length = 4 mm). Forty automated intermittent and graduated osteotomies (depth = 14 mm) were performed under external irrigation. Temperatures were measured in real time by three sensors at different depths (2, 8, and 13 mm). The temperature changes generated by the final drill of each protocol during the shearing and withdrawing processes were recorded as experimental results and subjected to the Student t test. RESULTS: Maximum temperature increases were recorded during the process of withdrawing in both protocols. In the control group, the mean thermal changes were 10.18°C, 8.61°C, and 5.78°C at depths of 2, 8, and 13 mm, respectively. In the test group, the mean thermal changes were 1.44°C, 4.46°C, and 3.58°C at depths of 2, 8, and 13 mm, respectively. The control group revealed statistically significantly (P < .0001) higher thermal changes than the test group, both in the superficial and deeper bone areas. CONCLUSION: An appropriate irrigation system could be crucial for thermal lowering during a guided implant osteotomy mainly in the coronal and middle third of the implant site. Copious irrigation should be provided during the withdrawing process since greater thermal increases could be expected. Lower temperature increases could be achieved, reducing drill-to-bone contact, ie, cutting surface length, due to short frictional force exposure.

Prefabricated Bar System for Immediate Loading in Edentulous Patients: A 5-Year Follow-Up Prospective Longitudinal Study.

OBJECTIVES: The aim of this clinical study was to evaluate a new type of prefabricated bar system, supported by axial and tilted implants at 5-year follow-up. MATERIALS AND METHODS: Twenty-nine consecutive participants (19 females, 10 males) (mean age 61.4 years), edentulous in one or both jaws, with severe atrophy of the posterior regions, were treated according to the All-on-four® protocol with immediately loaded axial (64) and tilted (64) implants supporting complete-arch screw-retained prostheses (12 maxillary, 20 mandibular) featuring a prefabricated bar as framework. Follow-up visits were performed at 3, 6, 12, 24, 48, and 60 months after implant insertion. Radiographic assessments were made using panoramic radiographs obtained immediately after surgery and at each follow-up visit. Bone level measurements around the axial and tilted implants were compared by means of the Student's t-test. RESULTS: One axial implant failed in the lower jaw and did not compromise prosthetic function. The 60-month overall implant survival rate was 100% for axially positioned implants and 98.44% for tilted implants. The implant survival rates were 100% in the maxilla and 98.75% in the mandible. None of the 32 fixed prostheses were lost during the observation period, representing a prosthetic survival rate of 100%. No statistically significant differences (P > 0.05) in marginal bone loss between tilted and axial implants were detected in either jaw over time. CONCLUSIONS: The use of the evaluated prefabricated bar for immediately loaded implants placed according to the All-on-four concept may significantly reduce implant failures; however, more long-term prospective clinical trials are needed to affirm the effectiveness of the surgical-prosthetic protocol.

A Retrospective 2-Year Clinical Study of Immediate Prosthetic Rehabilitation of Edentulous Jaws with Four Implants and Prefabricated Bars.

PURPOSE: The purpose of this retrospective investigation was to evaluate the use of a prefabricated bar system for immediately loaded implants placed and restored according to the All-on-Four concept with up to 24-month follow-up. MATERIALS AND METHODS: A total of 51 patients (31 males and 20 females; mean age 63.4 years) presented with edentulous or partially edentulous jaws with severe atrophy of the posterior regions. All patients were treated with full-arch fixed prostheses (28 maxillary, 34 mandibular) each supported by four implants (two vertical, two distally tilted). The implants were immediately loaded with screw-retained full-arch restorations. Each prosthesis was supported by a prefabricated metal bar combined with high-density acrylic resin. Follow-up visits were scheduled at 6, 12, and 24 months after initial prosthetic loading. Intraoral radiographs were obtained immediately after surgery and at each follow-up visit by using a custom radiograph holder and parallel technique. Marginal bone levels were assessed using digital image analysis. Implant and prosthetic survival and success rates were evaluated. Patient satisfaction was further assessed using a 100-mm visual analog scale (VAS). Data were compared by means of the Mantel-Haenszel test. RESULTS: No drop-outs occurred. The overall implant survival rates were 100% and 98.38% for the vertical and tilted implants respectively. Two of the 62 definitive fixed prostheses were lost during the observation period due to implant failure. Since restoration replacement due to implant failure was not judged a prosthodontic failure according to the survival criteria provided in this study, the overall prosthetic survival rate was 100%. No statistically significant differences in marginal bone levels between vertical and tilted implants were detected at 24-month follow-up evaluation in either jaw. All participants were functionally and esthetically satisfied with their definitive restorations after 2 years functioning, as confirmed by the average VAS scores (masticatory function: 99.7; phonetic function: 99.5, esthetics: 99.2). CONCLUSIONS: The preliminary 24-month results indicate that immediate loading of vertical and tilted implants using the evaluated prefabricated bar system may be a viable solution for edentulous jaw rehabilitation; however, more long-term prospective clinical trials are needed to affirm the effectiveness of this surgical-prosthetic protocol.

Straight Versus Angulated Abutments on Tilted Implants in Immediate Fixed Rehabilitation of the Edentulous Mandible: A 3-Year Retrospective Comparative Study.

PURPOSE: The aim of this study was to evaluate and compare the use of straight versus angulated abutments on tilted implants in the All-on-Four immediate function protocol. MATERIALS AND METHODS: A total of 85 patients (36 men and 49 women; mean age 56.5 years) with edentulous mandibles were treated according to the All-on-Four concept using computer-guided implant placement. All patients received immediate interim prostheses screwed onto distal tilted implants by means of angulated (control group, n = 42) or straight abutments (test group, n = 43) and were followed for at least 3 years. Outcome considerations comprised implant and prosthetic survival and success rates, marginal bone level changes, patient satisfaction, and required clinical time. Student t test at a significance level of P < .05 was used to correlate the influence of the prosthetic protocol on marginal bone levels around the implants. RESULTS: Overall implant survival rate was 98.21% for the control group and 98.83% for the test group. None of the 85 fixed prostheses were lost during the observation period (prosthetic survival rate of 100%). Statistically significant differences (P = .0068) in marginal bone loss were found between control and test groups. All patients were functionally and esthetically satisfied with their restorations. Required clinical time averaged 50 minutes for the control group and 30 minutes for the test group. CONCLUSION: The described simplified and shortened surgical-prosthodontic protocol that avoids use of angulated abutments may be considered a reliable alternative to the traditional All-on-Four protocol.

Deformations and cyclic fatigue resistance of nickel-titanium instruments inside a sequence.

AIM: To compare the effect of brushing motion on torsional and cyclic fatigue resistance of TF Adaptive instruments after clinical use. METHODS: 20 packs of TFA small sequence (SybronEndo, Orange, CA, USA) were used for this study and divided into two groups. Each instrument prepared one resin tooth, consisting in 4 canals with a complex anatomy. In group A, no brushing motion was performed. In group B, after the green instrument reached the working length, brushing motion with circumferential filing was performed for 15 seconds in each canal (overall 1 minute). All the instruments were then subjected to cyclic fatigue test and mean values and standard deviation for time to fracture were evaluated. Data were subjected to one-way analysis of variance and Bonferroni t-test procedure with a significance set at P < 0.05. RESULTS: No instruments were broken during preparation of root canals. Two TF Adaptive green and 5 yellow showed unwinding after intracanal clinical use. No statistically significant differences were found between green instruments of both groups (P > 0.05), while a statistically significant difference was found between the yellow instruments (P < 0.05), with group B showing an higher resistance to cyclic fatigue. CONCLUSIONS: A prolonged passive brushing motion did not adversely affected mechanical resistance of the instrument used for this purpose. Resistance to both deformations and cyclic fatigue of the second instrument within the TFA small sequence was enhanced by the coronal flaring provided by the brushing action of the first instrument used.

Influence of file motion on cyclic fatigue of new nickel titanium instruments.

AIM: The aim of the present study was to compare the resistance to cyclic fatigue of Hyflex® (Coltene-Whaledent, Allstatten, Switzerland) size 40 taper.04 nickel titanium instruments used in continuous rotation versus the use with a reciprocating motion. The null hypothesis was that different file motions had no influence on the lifetime of instruments subjected to a cyclic fatigue test. METHODOLOGY: 24 Hyflex® size 40 taper.04 nickel titanium instruments were randomly divided in two groups (n=12 each), and submitted to a cyclic fatigue test. The first group (CR group) were used with a continuous rotation, while the second one (RCP group) with a reciprocating motion. The cyclic fatigue tests were performed by using a stainless steel block containing an artificial canal shaped with a 135° angle. All instruments were rotated or reciprocated until fracture occurred. The time to fracture was recorded visually with a 1/100 second chronometer. Data were recorded and statistically analysed. RESULTS: Results indicated that instruments used with a reciprocating motion showed a significant increase in the meantime to failure when compared to those used in continuous rotation. CONCLUSIONS: The null hypothesis was rejected. Results of the present study showed that reciprocating motion extended resistance to cyclic fatigue of the tested nickel titanium instruments, when compared to continuous rotation.

Fractal analysis of elastographic images for automatic detection of diffuse diseases of salivary glands: preliminary results.

The geometry of some medical images of tissues, obtained by elastography and ultrasonography, is characterized in terms of complexity parameters such as the fractal dimension (FD). It is well known that in any image there are very subtle details that are not easily detectable by the human eye. However, in many cases like medical imaging diagnosis, these details are very important since they might contain some hidden information about the possible existence of certain pathological lesions like tissue degeneration, inflammation, or tumors. Therefore, an automatic method of analysis could be an expedient tool for physicians to give a faultless diagnosis. The fractal analysis is of great importance in relation to a quantitative evaluation of "real-time" elastography, a procedure considered to be operator dependent in the current clinical practice. Mathematical analysis reveals significant discrepancies among normal and pathological image patterns. The main objective of our work is to demonstrate the clinical utility of this procedure on an ultrasound image corresponding to a submandibular diffuse pathology.

Ultrasonographic staging of cutaneous malignant tumors: an ultrasonographic depth index.

The objective of this paper is to assess the role of conventional and high-frequency ultrasound in the evaluation of the depth of cutaneous skin cancer. The study was performed on 46 subjects, divided into 3 categories, according to their skin pathology [basal cell carcinoma (BCC), 18 subjects; superficial spreading melanoma (SSM), 8 subjects; nodular melanoma (NM), 20 subjects]. Conventional and high-frequency ultrasonographic measurements were performed in order to assess the thickness of the tumors and the vascularization degree. We compared the mean values of the tumoral thickness obtained by using ultrasound (ultrasonographic depth index) with the histological depth index, obtained after performing histological sections stained with hematoxylin-eosin, and specific monoclonal antibodies in case of pigmented tumors. We established a correlation index between the histological and ultrasonographic values of the tumoral thickness. We found a strong correlation between the ultrasonographic index (measured by high-frequency sonography) and the histological index for nodular BCC (correlation of 98.4 %), NM subjects (correlation of 98.4 %), and SSM subjects (correlation of 99.4 %). An increase of the blood supply was noticed in nodular lesions only. Ultrasonography allows a very accurate assessment of skin cancer. The ultrasonographic depth index can be considered an objective, non-invasive marker for cutaneous tumors, comparable to the histological one, with a very good sensitivity (98-99 %).

Minimally invasive treatment of the atrophic posterior maxilla: a proof-of-concept prospective study with a follow-up of between 36 and 54 months.

STATEMENT OF PROBLEM: In the posterior maxilla, tooth loss is usually associated with alveolar bone resorption and sinus pneumatization, limiting the placement of implants without grafting procedures. PURPOSE: The purpose of this study was to evaluate a minimally invasive treatment of the atrophic posterior maxilla, with axial and tilted implants and immediate loading. The research hypothesis was that the combination of a guided, minimally invasive approach and the biomimetic features of computer-aided design and computer-aided manufacturing (CAD/CAM) abutments would be an effective alternative to maxillary sinus floor augmentation procedures with reduced bone resorption around implants. MATERIAL AND METHODS: Twenty-seven consecutive participants (female=12, male=15) (mean age 54.18 years) with severe atrophy of the posterior maxilla were treated by using guided surgery with immediately loaded axial (39) and tilted (42) implants supporting CAD/CAM zirconia (39) and titanium (42) abutments (81 total) and partial fixed prostheses. Each participant underwent a computed tomography scan, after which 2 or 3 implants were positioned with a flapless or miniflap approach. The drilling protocol was adapted to the bone density of each implant site to obtain an insertion torque ranging between 40 and 50 Ncm. CAD/CAM customized abutments composed of zirconia or titanium were fixed to the implants with prosthetic screws tightened with a torque of 35 Ncm. An acrylic resin interim restoration reinforced with metal was placed immediately. Five to 6 months after initial loading, a zirconia framework was manufactured, and a definitive prosthesis was placed. Clinical and radiological controls were performed at baseline and after 1 and 3 years to assess implant and prosthesis survival and success rate and compare marginal bone remodeling of axial and tilted implants. Inferential statistics for radiological data were acquired by using the Mann-Whitney U-test. All statistical comparisons were conducted at the .05 significance level. RESULTS: The mean follow-up period was 43.3 months (ranging from 36 months to 54 months). The cumulative implant survival rate was 96.3% at 3 years. All prosthetic restorations were stable and in good function, resulting in a cumulative prosthetic survival rate of 100%. Three restorations had chipping of the veneer material; thereafter, the cumulative prosthetic success rate was 91.9%. CONCLUSIONS: Treatment of the posterior partially edentulous atrophic maxilla with guided surgery and immediate loading of tilted and straight implants supporting short-span partial fixed dental prostheses is effective.