A population-based epidemiological and health economic analysis of fracture-related infection.

Aims: The aim of this study was to perform the first population-based description of the epidemiological and health economic burden of fracture-related infection (FRI). Methods: This is a retrospective cohort study of operatively managed orthopaedic trauma patients from 1 January 2007 to 31 December 2016, performed in Queensland, Australia. Record linkage was used to develop a person-centric, population-based dataset incorporating routinely collected administrative, clinical, and health economic information. The FRI group consisted of patients with International Classification of Disease 10th Revision diagnosis codes for deep infection associated with an implanted device within two years following surgery, while all others were deemed not infected. Demographic and clinical variables, as well as healthcare utilization costs, were compared. Results: There were 111,402 patients operatively managed for orthopaedic trauma, with 2,775 of these (2.5%) complicated by FRI. The development of FRI had a statistically significant association with older age, male sex, residing in rural/remote areas, Aboriginal or Torres Strait Islander background, lower socioeconomic status, road traffic accident, work-related injuries, open fractures, anatomical region (lower limb, spine, pelvis), high injury severity, requiring soft-tissue coverage, and medical comorbidities (univariate analysis). Patients with FRI had an eight-times longer median inpatient length of stay (24 days vs 3 days), and a 2.8-times higher mean estimated inpatient hospitalization cost (AU$56,565 vs AU$19,773) compared with uninfected patients. The total estimated inpatient cost of the FRI cohort to the healthcare system was AU$156.9 million over the ten-year period. Conclusion: The results of this study advocate for improvements in trauma care and infection management, address social determinants of health, and highlight the upside potential to improve prevention and treatment strategies.

Mortality, patient-reported outcome measures, and the health economic burden of prosthetic joint infection.

Prosthetic joint infection (PJI) is one of the most devastating complications for a patient following arthroplasty. This scoping review aims to evaluate the burden of PJI on individual patients and the healthcare system regarding the mortality rate, patient-reported quality of life, and healthcare resource utilisation. Patients with PJI have up to a five-fold higher mortality rate than those who have undergone an uninfected primary arthroplasty. There is an increased use of ambulatory aids and reduced joint function scores in patients with PJI. Global quality of life is poorer, specifically measured by the EQ-5D. Direct hospitalisation costs are two- to five-fold higher, attributed to surgery and prostheses, antibiotics, and a prolonged inpatient stay. There is an immense clinical and health economic burden secondary to PJI worldwide. This is expected to rise exponentially due to the increasing number of primary procedures and an ageing population with comorbidities Improving preventative and treatment strategies is imperative for patients and the healthcare system.

Convergence of scaffold-guided bone regeneration principles and microvascular tissue transfer surgery.

A preclinical evaluation using a regenerative medicine methodology comprising an additively manufactured medical-grade ε-polycaprolactone ß-tricalcium phosphate (mPCL-TCP) scaffold with a corticoperiosteal flap was undertaken in eight sheep with a tibial critical-size segmental bone defect (9.5 cm3, M size) using the regenerative matching axial vascularization (RMAV) approach. Biomechanical, radiological, histological, and immunohistochemical analysis confirmed functional bone regeneration comparable to a clinical gold standard control (autologous bone graft) and was superior to a scaffold control group (mPCL-TCP only). Affirmative bone regeneration results from a pilot study using an XL size defect volume (19 cm3) subsequently supported clinical translation. A 27-year-old adult male underwent reconstruction of a 36-cm near-total intercalary tibial defect secondary to osteomyelitis using the RMAV approach. Robust bone regeneration led to complete independent weight bearing within 24 months. This article demonstrates the widely advocated and seldomly accomplished concept of "bench-to-bedside" research and has weighty implications for reconstructive surgery and regenerative medicine more generally.

Scaffold-guided bone regeneration in large volume tibial segmental defects.

Large volume losses in weight bearing long bones are a major challenge in clinical practice. Despite multiple innovations over the last decades, significant limitations subsist in current clinical treatment options which is driving a strong clinical demand for clinically translatable treatment alternatives, including bone tissue engineering applications. Despite these shortcomings, preclinical large animal models of large volume segmental bone defects to investigate the regenerative capacity of bone tissue engineering strategies under clinically relevant conditions are rarely described in literature. We herein present a newly established preclinical ovine animal model for the treatment of XL volume (19 cm3) segmental tibial defects. In eight aged male Merino sheep (age > 6 years) a mid-diaphyseal tibial segmental defect was created and stabilized with a 5.6 mm Dynamic Compression Plate (DCP). We present short-term (3 months) and long-term (12-15 months) results of a pilot study using medical grade Polycaprolactone-Tricalciumphosphate (mPCL-TCP) scaffolds combined with a dose of 2 mg rhBMP-7 delivered in Platelet-Rich- Plasma (PRP). Furthermore, detailed analyses of the mechanical properties of the scaffolds as well as interfragmentary movement (IFM) and DCP-surface strain in vitro and a comprehensive description of the surgical and post-surgery protocol and post-mortem analysis is given.

Cutibacterium acnes in shoulder surgery: a scoping review of strategies for prevention, diagnosis, and treatment.

BACKGROUND: Cutibacterium acnes is a commensal, gram-positive, facultatively anaerobic bacillus that resides in the dermis. Historically thought to be a contaminant when identified on cultured specimens, recent advances in diagnostic technology have now implicated it as the most common organism responsible for postoperative shoulder infections. Despite a recognition of the role of this organism and a significant research interest in recent years, there is clear lack of consensus guideline on strategies to prevent, diagnose, and treat postoperative shoulder infection. METHOD: The electronic databases PubMed, MEDLINE, CINAHL, Scopus, and Web of Science were searched in March 2020. All experimental and nonexperimental studies that investigate C acnes in shoulder surgery were included. Inclusion was limited to articles published after 2000 and written in English; reviews, gray literature, or abstracts were excluded. A total of 70 studies were included in this review. This scoping review was performed in accordance with the Extended Preferred Reporting Items of Systematic Reviews and Meta-Analyses Statement for Scoping Reviews (PRISMA-ScR). RESULTS: Standard surgical prophylactic regimens such as intravenous antibiotics and topical chlorhexidine are ineffective at removing C acnes from the deep layer of the dermis, and there is a shift toward using topical benzoyl peroxide with significantly improved efficacy. An improved understanding of the bacteria has demonstrated that a prolonged culture time of up to 14 days is needed, especially in cases of established infection. Advances in diagnostics such as sonication and molecular-based testing are promising. Although usually thought to be susceptible to a broad range of antibiotics, resistance is emerging to clindamycin. An improved understanding of its ability to form a biofilm highlights the difficulty in treating an established infection. CONCLUSION: The role of C acnes causing postoperative infection following shoulder surgery is being increasingly recognized. Strategies for prevention, diagnosis, and treatment have been outlined from both an antimicrobial and surgical perspective. A number of these strategies are emerging and require further research to demonstrate efficacy before implementation into clinical guidelines.

A preclinical large-animal model for the assessment of critical-size load-bearing bone defect reconstruction.

Critical-size bone defects, which require large-volume tissue reconstruction, remain a clinical challenge. Bone engineering has the potential to provide new treatment concepts, yet clinical translation requires anatomically and physiologically relevant preclinical models. The ovine critical-size long-bone defect model has been validated in numerous studies as a preclinical tool for evaluating both conventional and novel bone-engineering concepts. With sufficient training and experience in large-animal studies, it is a technically feasible procedure with a high level of reproducibility when appropriate preoperative and postoperative management protocols are followed. The model can be established by following a procedure that includes the following stages: (i) preoperative planning and preparation, (ii) the surgical approach, (iii) postoperative management, and (iv) postmortem analysis. Using this model, full results for peer-reviewed publication can be attained within 2 years. In this protocol, we comprehensively describe how to establish proficiency using the preclinical model for the evaluation of a range of bone defect reconstruction options.

Hematogenous vertebral osteomyelitis associated with intravascular device-associated infections - A retrospective cohort study.

INTRODUCTION: Aim of the study was to investigate the clinical, microbiological, radiological, and treatment characteristics of hematogenous vertebral osteomyelitis originating from infected intravascular devices. PATIENTS AND METHODS: Patients with secondary hematogenous vertebral osteomyelitis caused by an infected intravascular device were included in this retrospective cohort study. Patients with prior spinal surgery were excluded. Categorical variables were compared using χ2 or Fisher's exact tests and continuous variables using the Mann-Whitney U test. RESULTS: Sixty-seven patients with hematogenous vertebral osteomyelitis were included. Intravenous catheters were the source of infection in 45 patients (67%) and cardiovascular devices in 22 (33%). Fever was present in 21 patients (45%). The main pathogens were coagulase-negative staphylococci, isolated in 42 patients (63%), which grew from blood culture in 52 patients (87%), from vertebral tissue in 29 patients (56%) and from the explanted intravascular device in 18 patients (60%), where it was sampled. Infective endocarditis was diagnosed in 14 of 45 patients (31%), more common with cardiovascular devices than with intravascular catheters (56% versus 15%; P=0.008). CONCLUSIONS: In patients with vertebral osteomyelitis, growth of coagulase-negative staphylococci in blood is highly suggestive for intravascular device-associated infection. Despite absence of systemic or local signs of inflammation at the site of the device, blood cultures should be collected and echocardiography performed in these patients.

Vascularised bone transfer: History, blood supply and contemporary problems.

BACKGROUND: Since the description of the free fibula flap by Taylor in 1975, many flaps composed of bone have been described. This review documents the history of vascularised bone transfer and reflects on the current understanding of blood supply in an effort to define all clinically described osseous flaps. METHODS: A structured review of MEDLINE and Google Scholar was performed to identify all clinically described bone flaps in humans. Data regarding patterns of vascularity were collected where available from the anatomical literature. RESULTS: Vascularised bone transfer has evolved stepwise in concert with advances in reconstructive surgery techniques. This began with local flaps of the craniofacial skeleton in the late 19th century, followed by regional flaps such as the fibula flap for tibial reconstruction in the early 20th century. Prelaminated and pedicled myo-osseous flaps predominated until the advent of microsurgery and free tissue transfer in the 1960s and 1970s. Fifty-two different bone flaps were identified from 27 different bones. These flaps can be broadly classified into three types to reflect the pedicle: nutrient vessel (NV), penetrating periosteal vessel (PPV) and non-penetrating periosteal vessel (NPPV). NPPVs can be further classified according to the anatomical structure that serves as a conduit for the pedicle which may be direct-periosteal, musculoperiosteal or fascioperiosteal. DISCUSSION: The blood supply to bone is well described and is important to the reconstructive surgeon in the design of reliable vascularised bone suitable for transfer into defects requiring osseous replacement. Further study in this field could be directed at the implications of the pattern of bone flap vascularity on reconstructive outcomes, the changes in bone vascularity after osteotomy and the existence of "true" and "choke" anastomoses in cortical bone.

Delayed minimally invasive injection of allogenic bone marrow stromal cell sheets regenerates large bone defects in an ovine preclinical animal model.

Cell-based tissue engineering approaches are promising strategies in the field of regenerative medicine. However, the mode of cell delivery is still a concern and needs to be significantly improved. Scaffolds and/or matrices loaded with cells are often transplanted into a bone defect immediately after the defect has been created. At this point, the nutrient and oxygen supply is low and the inflammatory cascade is incited, thus creating a highly unfavorable microenvironment for transplanted cells to survive and participate in the regeneration process. We therefore developed a unique treatment concept using the delayed injection of allogenic bone marrow stromal cell (BMSC) sheets to regenerate a critical-sized tibial defect in sheep to study the effect of the cells' regeneration potential when introduced at a postinflammatory stage. Minimally invasive percutaneous injection of allogenic BMSCs into biodegradable composite scaffolds 4 weeks after the defect surgery led to significantly improved bone regeneration compared with preseeded scaffold/cell constructs and scaffold-only groups. Biomechanical testing and microcomputed tomography showed comparable results to the clinical reference standard (i.e., an autologous bone graft). To our knowledge, we are the first to show in a validated preclinical large animal model that delayed allogenic cell transplantation can provide applicable clinical treatment alternatives for challenging bone defects in the future.

Automated fit quantification of tibial nail designs during the insertion using computer three-dimensional modelling.

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of the tibia. An optimal nail design should both facilitate insertion and anatomically fit the bone geometry at its final position in order to reduce the risk of stress fractures and malalignments. Due to the nonexistence of suitable commercial software, we developed a software tool for the automated fit assessment of nail designs. Furthermore, we demonstrated that an optimised nail, which fits better at the final position, is also easier to insert. Three-dimensional models of two nail designs and 20 tibiae were used. The fitting was quantified in terms of surface area, maximum distance, sum of surface areas and sum of maximum distances by which the nail was protruding into the cortex. The software was programmed to insert the nail into the bone model and to quantify the fit at defined increment levels. On average, the misfit during the insertion in terms of the four fitting parameters was smaller for the Expert Tibial Nail Proximal bend (476.3 mm(2), 1.5 mm, 2029.8 mm(2), 6.5 mm) than the Expert Tibial Nail (736.7 mm(2), 2.2 mm, 2491.4 mm(2), 8.0 mm). The differences were statistically significant (p ≤ 0.05). The software could be used by nail implant manufacturers for the purpose of implant design validation.

Metal artifacts from titanium and steel screws in CT, 1.5T and 3T MR images of the tibial Pilon: a quantitative assessment in 3D.

Radiographs are commonly used to assess articular reduction of the distal tibia (pilon) fractures postoperatively, but may reveal malreductions inaccurately. While magnetic resonance imaging (MRI) and computed tomography (CT) are potential three-dimensional (3D) alternatives they generate metal-related artifacts. This study aims to quantify the artifact size from orthopaedic screws using CT, 1.5T and 3T MRI data. Three screws were inserted into one intact human cadaver ankle specimen proximal to and along the distal articular surface, then CT, 1.5T and 3T MRI scanned. Four types of screws were investigated: titanium alloy (TA), stainless steel (SS) (Ø =3.5 mm), cannulated TA (CTA) and cannulated SS (CSS) (Ø =4.0 mm, Ø empty core =2.6 mm). 3D artifact models were reconstructed using adaptive thresholding. The artifact size was measured by calculating the perpendicular distance from the central screw axis to the boundary of the artifact in four anatomical directions with respect to the distal tibia. The artifact sizes (in the order of TA, SS, CTA and CSS) from CT were 2.0, 2.6, 1.6 and 2.0 mm; from 1.5T MRI they were 3.7, 10.9, 2.9, and 9 mm; and 3T MRI they were 4.4, 15.3, 3.8, and 11.6 mm respectively. Therefore, CT can be used as long as the screws are at a safe distance of about 2 mm from the articular surface. MRI can be used if the screws are at least 3 mm away from the articular surface except for SS and CSS. Artifacts from steel screws were too large thus obstructed the pilon from being visualised in MRI. Significant differences (P<0.05) were found in the size of artifacts between all imaging modalities, screw types and material types, except 1.5T versus 3T MRI for the SS screws (P=0.063). CTA screws near the joint surface can improve postoperative assessment in CT and MRI. MRI presents a favourable non-ionising alternative when using titanium hardware. Since these factors may influence the quality of postoperative assessment, potential improvements in operative techniques should be considered.

Bone Regeneration Based on Tissue Engineering Conceptions - A 21st Century Perspective.

The role of Bone Tissue Engineering in the field of Regenerative Medicine has been the topic of substantial research over the past two decades. Technological advances have improved orthopaedic implants and surgical techniques for bone reconstruction. However, improvements in surgical techniques to reconstruct bone have been limited by the paucity of autologous materials available and donor site morbidity. Recent advances in the development of biomaterials have provided attractive alternatives to bone grafting expanding the surgical options for restoring the form and function of injured bone. Specifically, novel bioactive (second generation) biomaterials have been developed that are characterised by controlled action and reaction to the host tissue environment, whilst exhibiting controlled chemical breakdown and resorption with an ultimate replacement by regenerating tissue. Future generations of biomaterials (third generation) are designed to be not only osteoconductive but also osteoinductive, i.e. to stimulate regeneration of host tissues by combining tissue engineering and in situ tissue regeneration methods with a focus on novel applications. These techniques will lead to novel possibilities for tissue regeneration and repair. At present, tissue engineered constructs that may find future use as bone grafts for complex skeletal defects, whether from post-traumatic, degenerative, neoplastic or congenital/developmental "origin" require osseous reconstruction to ensure structural and functional integrity. Engineering functional bone using combinations of cells, scaffolds and bioactive factors is a promising strategy and a particular feature for future development in the area of hybrid materials which are able to exhibit suitable biomimetic and mechanical properties. This review will discuss the state of the art in this field and what we can expect from future generations of bone regeneration concepts.

Advances and future directions for management of trauma patients with musculoskeletal injuries.

Musculoskeletal injuries are the most common reason for operative procedures in severely injured patients and are major determinants of functional outcomes. In this paper, we summarise advances and future directions for management of multiply injured patients with major musculoskeletal trauma. Improved understanding of fracture healing has created new possibilities for management of particularly challenging problems, such as delayed union and non union of fractures and large bone defects. Optimum timing of major orthopaedic interventions is guided by increased knowledge about the immune response after injury. Individual treatment should be guided by trading off the benefits of early definitive skeletal stabilisation, and the potentially life-threatening risks of systemic complications such as fat embolism, acute lung injury, and multiple organ failure. New methods for measurement of fracture healing and function and quality of life outcomes pave the way for landmark trials that will guide the future management of musculoskeletal injuries.

A tissue engineering solution for segmental defect regeneration in load-bearing long bones.

The reconstruction of large defects (>10 mm) in humans usually relies on bone graft transplantation. Limiting factors include availability of graft material, comorbidity, and insufficient integration into the damaged bone. We compare the gold standard autograft with biodegradable composite scaffolds consisting of medical-grade polycaprolactone and tricalcium phosphate combined with autologous bone marrow-derived mesenchymal stem cells (MSCs) or recombinant human bone morphogenetic protein 7 (rhBMP-7). Critical-sized defects in sheep--a model closely resembling human bone formation and structure--were treated with autograft, rhBMP-7, or MSCs. Bridging was observed within 3 months for both the autograft and the rhBMP-7 treatment. After 12 months, biomechanical analysis and microcomputed tomography imaging showed significantly greater bone formation and superior strength for the biomaterial scaffolds loaded with rhBMP-7 compared to the autograft. Axial bone distribution was greater at the interfaces. With rhBMP-7, at 3 months, the radial bone distribution within the scaffolds was homogeneous. At 12 months, however, significantly more bone was found in the scaffold architecture, indicating bone remodeling. Scaffolds alone or with MSC inclusion did not induce levels of bone formation comparable to those of the autograft and rhBMP-7 groups. Applied clinically, this approach using rhBMP-7 could overcome autograft-associated limitations.

Distribution of bone marrow-derived cells in the fracture callus during plate fixation in a green fluorescent protein-chimeric mouse model.

To clarify the distribution of bone-marrow-derived cells in fractures treated by plate fixation, fracture models were created using the green fluorescent protein (GFP) chimeric mouse. We observed 2 types of fracture healing processes with different types of callus formation and cellular events by using Mouse Fix™, a device allowing plate fixation on the mouse femur, and differences in the distribution of bone-marrow-derived cells between the 2 types. The GFP chimeric mice were created by bone marrow transplantation. Fractures were created on the left femurs of mice and stabilized with either rigid (Group R) or flexible (Group F) plates to prepare undecalcified fresh-frozen sections. In Group F, a large external callus and a large intramedullary callus were formed mostly by endochondral ossification. The cells that made up the intramedullary callus and callus in the fracture gap were GFP positive, but most cells of the external callus were not. In Group R, bone union was achieved mostly without external callus formation, bone apposition occurred directly in the gap, and a small intramedullary callus was formed. As observed in Group F, this group had GFP-positive cells in the callus within the fracture gap and in the intramedullary calluses. The results of this study provided direct evidence of the distribution of bone-marrow-derived cells in the callus of fractures treated by plate fixation under different stability conditions.

A comparison of severely injured trauma patients admitted to level 1 trauma centres in Queensland and Germany.

BACKGROUND: The allocation of a trauma network in Queensland is still in the developmental phase. In a search for indicators to improve trauma care both locally as state-wide, a study was carried out comparing trauma patients in Queensland to trauma patients in Germany, a country with 82.4 million inhabitants and a well-established trauma system. METHODS: Trauma patients > or =15 years of age, with an Injury Severity Score (ISS) > or = 16 admitted to the Princess Alexandra Hospital (PAH) and to the 59 German hospitals participating in the Trauma Registry of the German Society for Trauma Surgery (DGU-G) during the year 2005 were retrospectively identified and analysed. RESULTS: Both cohorts are comparable when it comes to demographics and injury mechanism, but differ significantly in other important aspects. Striking is the low number of primary admitted patients in the PAH cohort: 58% versus 83% in the DGU-G cohort. PAH patients were less physiologically deranged and less severely injured: ISS 25.2 +/- 9.9 versus 29.9 +/- 13.1 (P < 0.001). Subsequently, they less often needed surgery (61% versus 79%), ICU admission (49% versus 92%) and had a lower mortality: 9.8% versus 17.9% of the DGU-G cohort. CONCLUSIONS: Relevant differences were the low number of primary admissions, the lesser severity of injuries, and the low mortality of the patients treated at the PAH. These differences are likely to be interrelated and Queensland's size and suboptimal organization of trauma care may have played an important role.