Tandem use of gastroesophageal resuscitative occlusion of the aorta followed by resuscitative endovascular balloon occlusion of the aorta in a lethal liver laceration model.

BACKGROUND: Gastroesophageal resuscitative occlusion of the aorta (GROA) has been shown effective in creating zone II aortic occlusion capable of temporarily improving survival in animal models of lethal noncompressible torso hemorrhage. In this study, tandem application of GROA transitioning to resuscitative endovascular balloon occlusion of the aorta (REBOA) is explored to demonstrate feasibility as a potential point-of-injury bridge to more advanced care, using a swine model of lethal abdominal hemorrhage. METHODS: Swine (n = 19) were anesthetized, instrumented, and subjected to a combination of controlled and uncontrolled hemorrhage from a grade-V liver laceration. Animals were designated as intervention (n = 9; GROA to REBOA) or control (n = 10), for 60 minutes. Following intervention, devices were deactivated, and animals received blood and crystalloid resuscitation. Animals were monitored for 4 hours. RESULTS: Injury resulted in onset of class IV shock in all animals with a mean arterial pressure (SD) of 24.5 (4.11) mm Hg at the start of intervention. Nine of 10 controls died during the intervention period with a median (interquartile) survival time of 8.5 (9.25) minutes. All animals receiving the intervention survived both the 60-minute intervention period demonstrating a significant survival improvement ( p = 0.0007). Transition from GROA to REBOA was successful in all animals with a transition time ranging from 30 to 90 seconds. Mean arterial pressure significantly improved in animals receiving GROA to REBOA for the duration of intervention, regardless of the method of aortic occlusion, with a range of 70.9 (16.04) mm Hg to 101.1 (15.3) mm Hg. Additional hemodynamics, metrics of shock, and oxygenation remained stable during intervention. CONCLUSION: Less invasive technologies such as GROA may present an opportunity to control noncompressible torso hemorrhage more rapidly, with a subsequent transition to more advanced care such as REBOA.

Semiautomated Software to Improve Stability and Reduce Operator-Induced Variation in Vascular Ultrasound Speckle Tracking.

OBJECTIVES: Ultrasound is useful in predicting arteriovenous fistula (AVF) maturation, which is essential for hemodialysis in end-stage renal disease patients. We developed ultrasound software that measures circumferential vessel wall strain (distensibility) using conventional ultrasound Digital Imaging and Communications in Medicine (DICOM) data. We evaluated user-induced variability in measurement of arterial wall distensibility and upon finding considerable variation we developed and tested 2 methods for semiautomated measurement. METHODS: Ultrasound scanning of arteries of 10 subjects scheduled for AVF surgery were performed. The top and bottom of the vessel wall were tracked using the Kanade-Lucas-Tomasi (KLT) feature-tracking algorithm over the stack of images in the DICOM cine loops. The wall distensibility was calculated from the change of vessel diameter over time. Two semiautomated methods were used for comparison. RESULTS: The location of points selected by users for the cine loops varied significantly, with a maximum spread of up to 120 pixels (7.8 mm) for the top and up to 140 pixels (9.1 mm) for the bottom of the vessel wall. This variation in users' point selection contributed to the variation in distensibility measurements (ranging from 5.63 to 41.04%). Both semiautomated methods substantially reduced variation and were highly correlated with the median distensibility values obtained by the 10 users. CONCLUSIONS: Minimizing user-induced variation by standardizing point selection will increase reproducibility and reliability of distensibility measurements. Our recent semiautomated software may help expand use in clinical studies to better understand the role of vascular wall compliance in predicting the maturation of fistulas.

Gastroesophageal resuscitative occlusion of the aorta prolongs survival in a lethal liver laceration model.

BACKGROUND: Noncompressible torso hemorrhage management remains a challenge especially in the prehospital setting. We evaluated a device designed to occlude the aorta from the stomach (gastroesophageal resuscitative occlusion of the aorta [GROA]) for its ability to stop hemorrhage and improve survival in a swine model of lethal liver laceration and compared its performance to resuscitative endovascular balloon occlusion of the aorta (REBOA) and controls. METHODS: Swine (n = 24) were surgically instrumented and a 30% controlled arterial hemorrhage over 20 minutes was followed by liver laceration. Animals received either GROA, REBOA, or control (no treatment) for 60 minutes. Following intervention, devices were deactivated, and animals received whole blood and crystalloid resuscitation. Animals were monitored for an additional 4 hours. RESULTS: The liver laceration resulted in the onset of class IV shock. Mean arterial blood pressure (MAP) (standard deviation) decreased from 84.5 mm Hg (11.69 mm Hg) to 27.1 mm Hg (5.65 mm Hg) at the start of the intervention. Seven of eight control animals died from injury prior to the end of the intervention period with a median survival (interquartile) time of 10.5 minutes (12 minutes). All GROA and REBOA animals survived the duration of the intervention period (60 minutes) with median survival times of 86 minutes (232 minutes) and 79 minutes (199 minutes) after resuscitation, respectively. The GROA and REBOA animals experienced a significant improvement in survival compared with controls (p = 0.01). Resuscitative endovascular balloon occlusion of the aorta resulted in higher MAP at the end of intervention 114.6 mm Hg (22.9 mm Hg) compared with GROA 88.2 mm Hg (18.72 mm Hg) (p = 0.024), as well as increased lactate compared with GROA 13.2 meq·L-1 (1.56 meq·L-1) versus 10.5 meq·L-1 (1.89 meq·L-1) (p = 0.028). Histological examination of the gastric mucosa in surviving animals revealed mild ischemic injury from both GROA and REBOA. CONCLUSION: The GROA and REBOA devices were both effective at temporarily stanching lethal noncompressible torso hemorrhage of the abdomen and prolonging survival.

Ultrasound Measurement of Vascular Distensibility Based on Edge Detection and Speckle Tracking Using Ultrasound DICOM Data.

This study presents an edge detection and speckle tracking (EDST) based algorithm to calculate distensibility as percentage of change of vessel diameter during cardiac cycles. Canny edge detector, Vandermonde matrix representation, Kanade Lucas Tomasi algorithm with pyramidal segmentation, and penalized least squares technique identifies the vessel lumen edge, track the vessel diameter, detrend the signal and find peaks and valleys when the vessel is fully distended or contracted. An upper extremity artery from 10 patients underwent an ultrasound examination as part of preoperative evaluation before arteriovenous fistula surgery. Three studies were performed to evaluate EDST with automatic peak and valley selection versus manual speckle selection of expert users using manual peak and valley selection. Results demonstrate the effectiveness of the proposed methodology, to obtain comparable results as those obtained by expert-users, and considerably reducing the variability associated with external factors such as excessive motion, fluctuations in stroke volume, beat-to-beat blood pressure changes, breathing cycles, and arm-transducer pressure.

Ultrasound speckle tracking to detect vascular distensibility changes from angioplasty and branch ligation in a radio-cephalic fistula: Use of novel open source software.

We used novel open source software, based on an ultrasound speckle tracking algorithm, to examine the distensibility of the vessel wall of the inflow artery, anastomosis, and outflow vein before and after two procedures. An 83-year-old white man with a poorly maturing radio-cephalic fistula received an angioplasty at the anastomosis followed by branch ligation 28 days later. Duplex Doppler measurements corroborated the blood flow related changes anticipated from the interventions. The experimental distensibility results showed that it is technically feasible to measure subtle vessel wall motion changes with high resolution (sub-millimeter) using standard Digital Imaging and Communications in Medicine (DICOM) ultrasound data, which are readily available on conventional ultrasound scanners. While this methodology was originally developed using high resolution radiofrequency from ultrasound data, the goal of this study was to use DICOM data, which makes this technology accessible to a wide range of users.

Novel intraperitoneal hemostasis device prolongs survival in a swine model of noncompressible abdominal hemorrhage.

BACKGROUND: Noncompressible torso hemorrhage (NCTH) of the abdomen is a challenge to rapidly control and treat in the prehospital and emergency department settings. In this pilot study, we developed a novel intraperitoneal hemostasis device (IPHD) prototype and evaluated its ability for slowing NCTH and prolonging survival in a porcine model of lethal abdominal multiorgan hemorrhage. METHODS: Yorkshire male swine (N = 8) were instrumented under general anesthesia for monitoring of hemodynamics and blood sampling. Animals were subjected to a 30% controlled arterial hemorrhage followed by lacerating combinations of the liver, spleen, and kidney. The abdomen was closed and after 2 minutes of NCTH, and the IPHD was inserted into the peritoneal cavity via an introducer (n = 5). The balloon was inflated and maintained for 60 minutes. At 60 minutes postdeployment, the balloon was deflated and removed, and blood resuscitation was initiated followed by gauze packing for hemostasis. The remaining animals (n = 3) were used as controls and subjected to the same injury without intervention. RESULTS: All animals managed with IPHD intervention (5 of 5 swine) survived the duration of the intervention period (60 minutes), while all control animals (3 of 3 swine) died at a time range of 15 to 43 minutes following organ injury (p = 0.0042). Animals receiving IPHD remained hemodynamically stable with a mean arterial pressure range of 44.86 to 55.10 mm Hg and experienced increased cardiac output and decreased shock index after treatment. Controls experienced hemodynamic decline in all parameters until endpoints were met. Upon IPHD deflation and removal, all treated animals began to hemorrhage again and expired within 2 to 132 minutes despite packing. CONCLUSION: Our data show that the IPHD concept is capable of prolonging survival by temporarily stanching lethal NCTH of the abdomen. This device may be an effective temporary countermeasure to NCTH of the abdomen that could be deployed in the prehospital environment or as a bridge to more advanced therapy.

Gastroesophageal resuscitative occlusion of the aorta: Physiologic tolerance in a swine model of hemorrhagic shock.

BACKGROUND: Resuscitative endovascular balloon occlusion of the aorta (REBOA) has been shown to be effective for management of noncompressible torso hemorrhage. However, this technique requires arterial cannulation, which can be time-consuming and not amendable to placement in austere environments. We present a novel, less invasive aortic occlusion device and technique designated gastroesophageal resuscitative occlusion of the aorta (GROA). In this study, we aimed to characterize the physiological tolerance and hemodynamic effects of a prototype GROA device in a model of severe hemorrhagic shock and resuscitation and compare with REBOA. METHODS: Swine (N = 47) were surgically instrumented for data collection. A 35% controlled arterial hemorrhage was followed by randomizing animals to 30-minute, 60-minute, or 90-minute interventions of GROA, REBOA, or control. Following intervention, devices were deactivated, and animals received whole blood and crystalloid resuscitation. Animals were monitored for an additional 4 hours. RESULTS: All animals except one GROA 90-minute application survived the duration of their intervention periods. Survival through resuscitation phase in GROA, REBOA, and control groups was similar in the 30-minute and 60-minute groups. The 90-minute occlusion groups exhibited deleterious effects upon device deactivation and reperfusion with two GROA animals surviving and no REBOA animals surviving. Mean (SD) arterial pressure in GROA and REBOA animals increased across all groups to 98 (31.50) mm Hg and 122 (24.79) mm Hg, respectively, following intervention. Lactate was elevated across all GROA and REBOA groups relative to controls during intervention but cleared by 4 hours in the 30-minute and 60-minute groups. Postmortem histological examination of the gastric mucosa revealed mild to moderate inflammation across all GROA groups. CONCLUSION: In this study, the hemodynamic effects and physiological tolerance of GROA was similar to REBOA. The GROA device was capable of achieving high zone II full aortic occlusion and may be able to serve as an effective method of aortic impingement.

Tissue mimicking materials for imaging and therapy phantoms: a review.

Tissue mimicking materials (TMMs), typically contained within phantoms, have been used for many decades in both imaging and therapeutic applications. This review investigates the specifications that are typically being used in development of the latest TMMs. The imaging modalities that have been investigated focus around CT, mammography, SPECT, PET, MRI and ultrasound. Therapeutic applications discussed within the review include radiotherapy, thermal therapy and surgical applications. A number of modalities were not reviewed including optical spectroscopy, optical imaging and planar x-rays. The emergence of image guided interventions and multimodality imaging have placed an increasing demand on the number of specifications on the latest TMMs. Material specification standards are available in some imaging areas such as ultrasound. It is recommended that this should be replicated for other imaging and therapeutic modalities. Materials used within phantoms have been reviewed for a series of imaging and therapeutic applications with the potential to become a testbed for cross-fertilization of materials across modalities. Deformation, texture, multimodality imaging and perfusion are common themes that are currently under development.

Construction of a comprehensive endovascular test bed for research and device development in mechanical thrombectomy in stroke.

OBJECTIVE: The development of new endovascular technologies and techniques for mechanical thrombectomy in stroke has greatly relied on benchtop simulators. This paper presents an affordable, versatile, and realistic benchtop simulation model for stroke. METHODS: A test bed for embolic occlusion of cerebrovascular arteries and mechanical thrombectomy was developed with 3D-printed and commercially available cerebrovascular phantoms, a customized hydraulic system to generate physiological flow rate and pressure, and 2 types of embolus analogs (elastic and fragment-prone) capable of causing embolic occlusions under physiological flow. RESULTS: The test bed was highly versatile and allowed realistic, radiation-free mechanical thrombectomy for stroke due to large-vessel occlusion with rapid exchange of geometries and phantom types. Of the transparent cerebrovascular phantoms tested, the 3D-printed phantom was the easiest to manufacture, the glass model offered the best visibility of the interaction between embolus and thrombectomy device, and the flexible model most accurately mimicked the endovascular system during device navigation. None of the phantoms modeled branches smaller than 1 mm or perforating arteries, and none underwent realistic deformation or luminal collapse from device manipulation or vacuum. The hydraulic system created physiological flow rate and pressure leading to iatrogenic embolization during thrombectomy in all phantoms. Embolus analogs with known fabrication technique, structure, and tensile strength were introduced and consistently occluded the middle cerebral artery bifurcation under physiological flow, and their interaction with the device was accurately visualized. CONCLUSIONS: The test bed presented in this study is a low-cost, comprehensive, realistic, and versatile platform that enabled high-quality analysis of embolus-device interaction in multiple cerebrovascular phantoms and embolus analogs.

Hollow Notched K-Wires for Bone Drilling With Through-Tool Cooling.

Kirschner wire (K-wire) is a common tool in clinical orthopedic surgery for bone fracture fixation. A significant amount of heat is generated in bone drilling using K-wires, causing bone thermal necrosis and osteonecrosis. To minimize the temperature rise, a hollow notched K-wire in a modified surgical hand drill with through-tool cooling was developed to study the bone temperature, debris evacuation, and material removal rate. The hollow notched K-wire was fabricated by grinding and micro-milling on a stainless steel tube. Bone drilling tests were conducted to evaluate its performance against the solid K-wires. Results showed that compared with solid K-wires, hollow notched K-wire drilling without cooling reduced the peak bone temperature rise, thrust force, and torque by 42%, 59%, and 62% correspondingly. The through-tool compressed air reduced the peak bone temperature rise by 48% with the forced air convection and better debris evacuation. The through-tool water cooling decreased the bone temperature by only 26% due to accumulation and blockage of bone debris in the groove and channel. This study demonstrated the benefit of using the hollow notched K-wire with through-tool compressed air to prevent the bone thermal necrosis. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2297-2306, 2019.

Evaluation of Heat Generation in Unidirectional Versus Oscillatory Modes During K-Wire Insertion in Bone.

Heat generation during insertion of Kirschner wires (K-wires) may lead to thermal osteonecrosis and can affect the construct fixation. Unidirectional and oscillatory drilling modes are options for K-wire insertion, but understanding of the difference in heat generation between the two modes is lacking. The goal of this study was to compare the temperature rise during K-wire insertion under these two modes and provide technical guidelines for K-wire placement to minimize thermal injury. Ten orthopedic surgeons were instructed to drill holes on hydrated ex vivo bovine bones under two modes. The drilling trials were evaluated in terms of temperature, thrust force, torque, drilling time, and tool wear. The analysis of variance showed that the oscillatory mode generated significantly lowered peak bone temperature rise (13% lower mean value, p = 0.036) over significantly longer drilling time (46% higher mean time, p < 0.001) than the unidirectional mode. Drilling time had significant effect on peak bone temperature rise under both modes (p < 0.001) and impact of peak thrust force was significant under oscillatory mode (p < 0.001). These findings suggest that the drilling mode choice is a compromise between peak temperature and bone exposure time. Shortening the drilling time was the key under both modes to minimize temperature rise and thermal necrosis risk. To achieve faster drilling, technique analysis found that "shaky" and intermittent drilling with moderate thrust force are preferred techniques by small vibration of the drill about the K-wire axis and slight lift-up of the K-wire once or twice during drilling. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1903-1909, 2019.

3D Printed composite for simulating thermal and mechanical responses of the cortical bone in orthopaedic surgery.

Synthetic bones made of polyurethane (PU) foams or glass-fiber reinforced epoxy are often used in surgical training, planning, and tool analysis, but these materials cannot be 3D printed for a patient-specific design. This paper introduces a new type of bone-mimicking material made by the binder jetting technology and a post-strengthening process with epoxy, namely 3D polymer-infiltrated composite (3DPIC). 3DPIC has been previously evaluated by surgeons as a proper alternative to commercial synthetic bones, but no quantitative testing data is available. Therefore, a series of experiments are conducted in this study to verify the use of 3DPIC. The first part of experiments includes the measurement of mechanical properties using the four-point bending and the measurement of thermal properties. The second part of experiments is to test drilling haptic and thermal responses of 3DPIC as compared to the cortical bone. The results show that 3DPIC has a comparable elastic modulus but a lower strength than the cortical bone. 3DPIC can produce realistic drilling force and torque as well as representative temperature change in drilling operations, but the bone debris tends to be more ductile and continuous than that of the cortical bone. Applications and limitations of 3DPIC are discussed based on these results.

Simulator and 2 tools: Validation of performance measures from a novel neurosurgery simulation model using the current Standards framework.

BACKGROUND: Ventriculostomy is a common neurosurgical procedure with a relatively steep learning curve. A low-cost, high-fidelity simulator paired with procedure-specific performance measures would provide a safe environment to teach ventriculostomy procedural skills. The same validated simulation model could also allow for assessment of trainees' proficiencies with measures that align with Accreditation Council for Graduate Medical Education milestones. This study extends previous work to evaluate validity evidence from the simulator, its newly developed performance assessment, the Ventricolostomy Procedural Assessment Tool, and the Objective Structured Assessment for Technical Skills. METHODS: After Institutional Review Board exemption, performance data were collected from 11 novice and 3 expert neurosurgeons (n = 14). Participants self-reported their ability to perform tasks on the simulator using the Ventricolostomy Procedural Assessment Tool, an 11-item, step-wise instrument with 5-point rating scales ranging from 1 (unable to perform) to 5 (performs easily and smoothly). De-identified operative performances were videotaped and independently rated by 3 neurosurgeons, using the Ventricolostomy Procedural Assessment Tool and Objective Structured Assessment for Technical Skills. We evaluated multiple sources of validity evidence (2014 Standards) to examine psychometric quality of the measures and to test our assumption that the tools could discriminate between novice and expert performances adequately. We used a multifacet Rasch model and traditional indices, such as Cronbach alpha, intraclass correlation, and Wilcoxon signed-rank test estimates. RESULTS: Validity evidence relevant to test content and response processes was supported adequately. Evidence of internal structure was supported by high interitem consistency (n = 0.95) and inter-rater agreement for most Ventricolostomy Procedural Assessment Tool items (Intraclass correlation coefficient = [0.00, 0.91]) and all Objective Structured Assessment for Technical Skills items (Intraclass correlation coefficient = [0.80, 0.93]). Overall, novices performed at a lower level than experts on both scales (P < .05), supporting evidence relevant to relationships to other variables. Deeper analysis of novice/expert ratings indicated novices attained lower performances ratings for all Ventricolostomy Procedural Assessment Tool and Objective Structured Assessment for Technical Skills items, but statistical significance was only achieved for the Objective Structured Assessment for Technical Skills items (P < .01). Rater bias estimates were favorable, supporting evidence relevant to consequences of testing. CONCLUSION: Despite a small sample, favorable evidence using current Standards supports the use of the novel simulator and both tools combined for skills training and performance assessment, but challenges (potential threats to validity) should be considered prior to implementation.

A physical simulator for endoscopic endonasal drilling techniques: technical note.

In this paper, the authors present a physical model developed to teach surgeons the requisite drilling techniques when using an endoscopic endonasal approach (EEA) to the skull base. EEA is increasingly used for treating pathologies of the ventral and ventrolateral cranial base. Endonasal drilling is a unique skill in terms of the instruments used, the long reach required, and the restricted angulation, and gaining competency requires much practice. Based on the successful experience in creating custom simulators, the authors used 3D printing to build an EEA training model from post-processed thin-cut head CT scans, formulating the materials to provide realistic haptic feedback and endoscope handling. They performed a preliminary assessment at 2 institutions to evaluate content validity of the simulator as the first step of the validation process. Overall results were positive, particularly in terms of bony landmarks and haptic response, though minor refinements were suggested prior to use as a training device.

Numerical evaluation of sequential bone drilling strategies based on thermal damage.

Sequentially drilling multiple holes in bone is used clinically for surface preparation to aid in fusion of a joint, typically under non-irrigated conditions. Drilling induces a significant amount of heat and accumulates after multiple passes, which can result in thermal osteonecrosis and various complications. To understand the heat propagation over time, a 3D finite element model was developed to simulate sequential bone drilling. By incorporating proper material properties and a modified bone necrosis criteria, this model can visualize the propagation of damaged areas. For this study, comparisons between a 2.0 mm Kirschner wire and 2.0 mm twist drill were conducted with their heat sources determined using an inverse method and experimentally measured bone temperatures. Three clinically viable solutions to reduce thermally-induced bone damage were evaluated using finite element analysis, including tool selection, time interval between passes, and different drilling sequences. Results show that the ideal solution would be using twist drills rather than Kirschner wires if the situation allows. A shorter time interval between passes was also found to be beneficial as it reduces the total heat exposure time. Lastly, optimizing the drilling sequence reduced the thermal damage of bone, but the effect may be limited. This study demonstrates the feasibility of using the proposed model to study clinical issues and find potential solutions prior to clinical trials.

Cool Mist Irrigation Improves Heat Dissipation during Surgical Bone Drilling.

Objective High-speed drilling generates heat in small cavities and may pose a risk for neurovascular tissues. We hypothesize that a continuous pressurized cold mist could be an alternative approach for better cooling during drilling of bone to access cranial lesions. This study aims to examine this idea experimentally. Design Ex-vivo drilling tests with controlled speed, feed, and depth were performed on cortical bone samples. Thermocouples were embedded underneath the drilling path to compare the temperature rises under mist cooling (at 3°C, < 300 mL/h) and flood irrigation (at 22°C, > 800 mL/h). Results A significant difference exists between these two systems (p value < 0.05). The measured temperature was ∼ 4°C lower for mist cooling than for flood irrigation, even with less than a third of the flow rate. Conclusion Experimental data indicate the capability of mist cooling to reduce heat generation while simultaneously enabling flow reduction and targeted cooling. An improved field of view in an extremely narrow access corridor may be achieved with this technology.

Bipolar electrosurgical vessel-sealing device with compressive force monitoring.

Bipolar electrosurgical vessel sealing is commonly used in surgery to perform hemostasis. The electrode compressive force is demonstrably an important factor affecting the vessel seal burst pressure, an index of the seal quality. Using a piezoresistive force sensor attached to the handle of a laparoscopic surgical device, applied handle force was measured and used to predict the electrosurgical vessel compressive force and the pressure at the electrode. The sensor enables the monitoring of vessel compressive force during surgery. Four levels of compressive force were applied to seal three types of porcine vessels (carotid artery, femoral artery, and jugular vein). The burst pressure of the vessel seal was tested to evaluate the seal quality. Compressive pressure was found to be a statistically significant factor affecting burst pressure for femoral arteries and jugular veins. Vessels sealed with low compressive pressure (<300 kPa) have a higher failure rate (burst pressure<100 mm Hg) than vessels sealed with high compressive pressure. An adequate compressive force is required to generate the compressive pressure needed to form a seal with high burst pressure. A laparoscopic surgical device with compressive force monitoring capability can help ensure adequate compressive pressure, vessel burst pressure, and quality of seal.

Thermoelectrical modeling of bipolar coagulation on posterior spinal artery in a porcine spinal surgery model.

The primary objective of our study was to develop a thermoelectrical model with both solid and liquid phases to calculate tissue temperature during bipolar coagulation of a posterior spinal artery on the spinal cord. Control of thermal spread caused by coagulation is a concern in spinal surgery. This model utilizes a nonisothermal flow to account for the heat transfer due to the movement of cerebrospinal fluid that is induced by electrical field and temperature gradient. The model is validated by in situ temperature measurements on a porcine spinal cord model. The maximum error for tissue temperature of this model is 12.6%, and the overall average error is 4.2%. The lesional region (>50°C) is identified to be as wide as 5 mm, and thermal dose cumulative equivalent minutes at 43°C (CEM 43) is also calculated with this model. The incorporation of nonisothermal flow has been shown to be crucial in order to accurately predict thermal dose in tissue. The developed model can be further used to establish a guideline for the use of bipolar coagulation.

Comparison of thermal coagulation profiles for bipolar forceps with different cooling mechanisms in a porcine model of spinal surgery.

BACKGROUND: Coagulation accomplished using bipolar forceps is common in neurosurgery. Control of thermal spread from the forceps tips into surrounding neural tissues is a persistent concern, as neural tissues are especially vulnerable to heat injury. The purpose of our investigation was to compare the efficacy of cooling mechanisms for four different bipolar forceps and to understand thermal spread when coagulating vessels on the spinal cord. METHODS: Immediately following euthanasia, the dura mater of an ex vivo porcine model was opened to expose vessels on the spinal cord for coagulation. Temperature profiles were measured at generator power of 25 W and at fixed 5-second activation times. The bipolar forceps used in this study included regular stainless steel, titanium, heat-pipe embedded, and SILVERGlide forceps. Temperature was measured by micro-thermistor at the midpoint between the bipolar tips, and 1 and 2 mm away from the midpoint along the centerline. Statistical analysis was performed to evaluate temperature differences. RESULTS: Temperature profiles indicated that heat-pipe embedded forceps create the least amount of temperature increase and the highest normalized temperature decreasing slope after activation. The decreasing slope of SILVERGlide forceps is slightly higher than that of regular stainless steel forceps. CONCLUSIONS: Bipolar forceps incorporating either heat-pipe embedded technology or SILVERGlide coating can effectively limit excessive thermal spread, thus decreasing potential injury to adjacent tissues when compared with standard stainless steel and titanium bipolar forceps. Of the two, heat-pipe embedded technology appeared safest, having better cooling efficiency at higher temperature.