Advanced fabrication of complex biopolymer microcapsules via RSM-optimized supercritical carbon dioxide solution-enhanced dispersion: A comparative analysis of various microencapsulation techniques.

This work aimed to enhance hemp seed oil encapsulation within a hemp seed protein-alginate complex by optimizing parameters in the solution-enhanced dispersion process, employing supercritical carbon dioxide (SEDS) without reliance on organic solvents or elevated temperatures. By response surface methodology (RSM), the microencapsulation efficacy (MEE), particle size (PS) and peroxide value (PV) was determined with respect to three parameters; temperature (°C), pressure (bar) and feed flow rate (mL/min). The optimum conditions were predicted at temperature (40 °C), pressure (150 bar) and feed flow rate (2 mL/min) to offer an MEE of 89.47%, PS of 7.81 µm and PV of 2.91 (meq/kg oil). In addition, the SEDS method was compared with spray- and freeze-drying for encapsulating hemp seed oil. The findings demonstrated SEDS' superiority, exhibiting exceptional attributes such as the highest MEE, smallest PS and the production of spherical, smooth microcapsules. This highlights its effectiveness in comparison to spray- and freeze-drying methods.

Sciadonic acid attenuates high-fat diet-induced bone metabolism disorders in mice.

High-fat diet (HFD) has been associated with certain negative bone-related outcomes, such as bone metabolism disruption and bone loss. Sciadonic acid (SC), one of the main nutritional and functional components of Torreya grandis seed oil, is a unique Δ5-unsaturated-polymethylene-interrupted fatty acid (Δ5-UPIFA) that has been claimed to counteract such disorders owing to some of its physiological effects. However, the role of SC in ameliorating bone metabolism disorders due to HFD remains unclear. In the present investigation, we observed that SC modulates the OPG/RANKL/RANK signaling pathway by modifying the lipid metabolic state and decreasing inflammation in mice. In turn, it could balance bone resorption and formation as well as calcium and phosphorus levels, enhance bone strength and bone mineral density (BMD), and improve its microstructure. In addition, SC could inhibit fat vacuoles in bone, reverse the phenomenon of reduced numbers and poor continuity of bone trabeculae, and promote orderly arrangement of collagen fibers and cartilage repair. This study provides some theoretical basis for SC as a dietary intervention agent to enhance bone nutrition.

Effect of different gelators on the physicochemical properties and microstructure of coconut oleogels.

BACKGROUND: The inherent properties of coconut oil (CO), including its elevated saturated fatty acid content and low melting point, make it suitable for application in plastic fat processing. The present study explores the physicochemical characteristics, micromorphology and oxidative stability of oleogels produced from CO using various gelators [ethylcellulose (EC), ß-sitosterol/γ-oryzanol (PS) and glyceryl monostearate (MG)] to elucidate the formation mechanisms of coconut oleogels (EC-COO, PS-COO and MG-COO). RESULTS: Three oleogel systems exhibited a solid-like behavior, with the formation of crystalline forms dominated by ß and ß'. Among them, PS-COO exhibited enhanced capability with respect to immobilizing liquid oils, resulting in solidification with high oil-binding capacity, moderate hardness and good elasticity. By contrast, MG-COO demonstrated inferior stability compared to PS-COO and EC-COO. Furthermore, MG-COO and PS-COO demonstrated antioxidant properties against CO oxidation, whereas EC-COO exhibited the opposite effect. PS-COO and EC-COO exhibited superior thermodynamic behavior compared to MG-COO. CONCLUSION: Three oleogels based on CO were successfully prepared. The mechanical strength, storage modulus and thermodynamic stability of the CO oleogel exhibited concentration dependence with increasing gelling agent addition. PS-COO demonstrated relatively robust oil-binding capacity and oxidative stability, particularly with a 15% PS addition. This information contributes to a deeper understanding of CO-based oleogels and offers theoretical insights for their application in food products. © 2024 Society of Chemical Industry.

Design of Recyclable Carboxylic Metal-Organic Framework/Chitosan Aerogels for Oil Bleaching.

Novel hierarchical metal-organic framework/chitosan aerogel composites were developed for oil bleaching. UiO-66-COOH-type metal organic frameworks (Zr-MOFs) were synthesized and integrated onto a chitosan matrix with different contents and named MOF-aerogel-1 and MOF-aerogel-2. Due to the compatibility of chitosan, the carboxylic zirconium MOF-aerogels not only maintained the inherent chemical accessibility of UiO-66-COOH, but the unique crystallization and structural characteristics of these MOF nanoparticles were also preserved. Through 3-dimensional reconstructed images, aggregation of the UiO-66-COOH particles was observed in MOF-aerogel-1, while the MOF was homogeneously distributed on the surface of the chitosan lamellae in MOF-aerogel-2. All aerogels, with or without immobilized MOF nanoparticles, were capable of removing carotenoids during oil bleaching. MOF-aerogel-2 showed the most satisfying removal proportions of 26.6%, 36.5%, and 47.2% at 50 °C, 75 °C, and 100 °C, respectively, and its performance was very similar to that of commercial activated clay. The reuse performance of MOF-aerogel-2 was tested, and the results showed its exceptional sustainability for carotenoid removal. These findings suggested the effectiveness of the MOFaerogel for potential utilization in oil bleaching treatments.

Deep-fat Frying Using Soybean Oil-based Diacylglycerol-Palm Olein Oil Blends: Thermo-oxidative Stability, 3-MCPDE and Glycidyl Ester Formation.

Diacylglycerol (DAG) is commonly known as one of the precursors for the 3-monochloro-1,2-propanediol esters (3-MCPDE) and glycidyl esters (GE) formation. However, due to its health-promoting effects, its potential as alternative frying medium was examined. This study aimed to assess the frying performance of soybean oil-based diacylglycerol oil (DO) and its oil blends with palm olein (PO), in comparison with PO. Four different oil types (DO, PO, OB I (DO:PO, 1:1, w/w) and OB II (DO:PO, 1:2, w/w)) were used to fry potato chips for five consecutive days at 180℃. The formation of oxidation compounds, acylglycerol composition, 3-MCPDE and GE changes throughout the frying study were investigated. Both OB I and OB II exhibited lower oxidation compounds' formation rates than PO. Besides, significant (p < 0.05) reductions of 3-MCPDE and increments of GE levels were observed in all frying systems throughout the frying study. After 25 frying cycles, the 3-MCPDE levels in all frying oils were below 0.13 mg/kg, while the GE levels ranged from 1.51 mg/kg to 1.89 mg/kg. Despite the poorer oxidative stability of DO, its 3-MCPDE and GE levels were much lower compared to PO. In comparison to DO, the 3-MCPDE degradation and GE formation rates were enhanced and reduced, respectively with the blending of PO and DO. This study showed the potential of DO:PO oil blend in deep-fat frying application. With appropriate blending ratio of DO and PO, an alternative frying medium with enhanced nutritional value and oxidative stability could be developed.

Structured lipids produced from palm-olein oil by interesterification: A controllable lipase-catalyzed approach in a solvent-free system.

Palm olein (POL) was modified by enzymatic interesterification with different degrees of acyl migration in a solvent-free packed bed reactor. The fatty acid and acylglycerol composition, isomer content, thermodynamic behavior, and relationship between crystal polymorphism, solid fat content (SFC), crystal microstructure, and texture before and after modification were studied. We found that the increase in sn-2 saturation interesterification was not only due to the generated tripalmitin (PPP) but also caused by acyl migration, and the SFC profiles were changed accordingly. The emergence of high melting point acylglycerols was an important factor accelerating the crystallization rate, further shortening the crystallization induction time, leading to the formation of large crystal spherulites, thereby reducing the hardness. The transformation from the ß' to the ß form occurred during post-hardening during storage. The isomer content also affected the physicochemical properties of the modified POL.

Foodomics Reveals Anti-Obesity Properties of Cannabinoids from Hemp Oil.

SCOPE: Molecular networking (MN) analysis intends to provide chemical insight of untargeted mass spectrometry (MS) data to the user's underlying biological questions. Foodomics is the study of chemical compounds in food using advanced omics methods. In this study, an MS-MN-based foodomics approach is developed to investigate the composition and anti-obesity activity of cannabinoids in hemp oil. METHODS AND RESULTS: A total of 16 cannabinoids are determined in optimized microwave pretreatment of hemp oil using the developed approach. Untargeted metabolomics analysis reveals that cannabinoid extract (CE) and its major constituent (cannabidiol, CBD), can alleviate high glucose-induced increases in lipids and carbohydrates, and decreases in amino acid and nucleic acid. Moreover, CE and CBD are also found to suppress the expression levels of mdt-15, sbp-1, fat-5, fat-6, fat-7, daf-2, and elevate the expression level of daf-1, daf-7, daf-16, sod-3, gst-4, lipl-4, resulting in the decrease of lipid synthesis and the enhance of kinetism. Canonical correspondence analysis (CCA) uncovers strong associations between specific metabolic alterations and gene expression levels. CONCLUSION: These findings from this exploratory study offer a new insight into the roles of cannabinoids in the treatment of obesity and related complications.

Formation of 3-MCPD and glycidyl esters in biscuits produced using soybean oil-based diacylglycerol stearin-shortening blends: Impacts of different baking temperatures and blending ratios.

Diacylglycerol (DAG) is commonly known as one of the precursors for 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) formation. Besides, 3-MCPDE and GE are heat-induced contaminants which can be formed in fat-containing baked products during the baking process. This study attempted to replace the conventional palm-based shortening (SH) with a healthier fat, namely soybean oil-based diacylglycerol stearin (SDAG) in producing biscuits. The effects of different baking temperatures (200, 210 and 220 °C) and SDAG:SH fat blend ratios (0:100, 60:40 (D64S), 80:20 (D82S), 100:0, w/w) towards the biscuits' physical properties were evaluated. Moreover, the oxidative stability, 3-MCPDPE and GE formation in the fats extracted from the biscuits were also investigated. SDAG-produced biscuit showed slight reductions in the spread ratio compared to the SH-produced biscuit. The elevated baking temperatures resulted in biscuits with increased hardness and low moisture content. Pure SDAG and the other fat blends exhibited significant (p < 0.05) poorer oxidative stability than SH. However, D64S was found to be more oxidative stable compared to SDAG and D82S. The D64S fat blend exhibited the lowest 3-MCPDE and GE formation rates among all fat samples with the increasing baking temperatures. Furthermore, the amount of 3-MCPDE and GE detected in the fats extracted from the biscuits baked at highest temperature (220 °C) were still within the safety limit. In overall, better quality biscuits were produced when lower baking temperature (200 °C) was used as all biscuits baked with different fats showed similar textural properties (hardness and cohesiveness), higher oxidative stability and lower formation of 3-MCPDE and GE compared to biscuits baked at higher temperatures. The findings justified the potential of D64S fat blend in replacing the conventional SH in producing healthier biscuits.

The Formation of 3-Monochloropropanediol Esters and Glycidyl Esters during Heat-Induced Processing Using an Olive-Based Edible Oil.

With the prevalence of edible diacylglycerol (DAG) oil, which is beneficial to human, the generation of 3-monochloropropanediol esters (3-MCPDE) and glycidyl esters (GE) as well as the stability of physical properties during heat-induced processing still need to be explored. In this study, the experiment used olive-based edible oil with different contents of DAG (40, 60, and 80%) to make crackers and fry chicken. They were heated at 160 and 180 °C to determine the changes in 3-MCPDE and GE, the crackers' hardness and gumminess, and the physical properties of the oil. During baking and frying, 3-MCPDE decreased, while the content of GE slightly increased with the prolonged heating duration. Finally, 3-MCPDE and GE were lower than 1.25 mg/kg and 1.00 mg/kg, respectively. The AV increased proportionally as duration increased and POV was below 0.30 g/100 g. In general, the changes in 3-MCPDE and GE were related to the heating temperature and duration, and not significantly (p > 0.05) related to the content of DAG.

Effect of V-type crystallinity and starch particle structure on the oil loading capacity and anti-oxidation.

Starch-based carriers have a great potential in functional oil encapsulation because of their mild preparation conditions, but the oil loading capacity and underlying anti-oxidation mechanism remain unclear. Here V-type starches were applied to fabricate flaxseed oil powder. Particle size analysis and scanning electron microscopy showed a loose aggregation microstructure of normal maize starch (NMS) prepared using the anti-solvent (AS) precipitation method, with an average size of 24.9 µm. Differential scanning calorimetry displayed a good thermo-oxidation resistance of NMS-derived V-type starch prepared via AS precipitation. Principal component analysis revealed that the oil loading capacity, related closely to V-type crystallinity and D50, has a significant positive correlation with the onset oxidation temperature and a negative correlation with the peroxide, thiobarbituric acid, and ρ-anisidine values. Our original study reveals the effects of V-type crystallinity and aggregation microstructure on the oil loading capacity and anti-oxidation, providing theoretical guidance for developing novel, starch-based carriers.

Exploring the Antioxidant and Structural Properties of Black Bean Protein Hydrolysate and Its Peptide Fractions.

A great deal of attention has been paid to charactering the protein hydrolysates prepared by enzymatic hydrolysis, while the influence of molecular weight (MW) distributions on the resultant hydrolysates remains unclear. This study aimed to explore the physicochemical and antioxidant characteristics of protein hydrolysate and its peptide fractions. Bromelain has been commonly used to hydrolyze black bean protein via response surface methodology (RSM). The optimal hydrolysis parameters were observed at 52°C, pH 7, E/S ratio of 2.2 (ratio of enzyme to substrate), and 4 h. Under these parameters, the hydrolysate (BPH) presented DPPH radical scavenging activity and Fe2+ chelating activity with IC50 values of 100.08 ± 2.42 and 71.49 ± 0.81 µg/mL, respectively. This might be attributed to structural characteristics, varying with different molecular weight distributions. Interestingly, among BPH and its peptide fractions, peptides smaller than 3 kDa were noted to exhibit the strongest DPPH and ABTS radical scavenging activity. More intriguingly, this peptide fraction (<3 kDa) could predominantly prolong the induction period of sunflower oil, which was, respectively increased to 1.31 folds. This may be due to high proportions of hydrophobic amino acids. Unexpectedly, the optimal Fe2+ chelating activity was observed in the peptide fraction measuring at 3-10 kDa, showing highly positive correlations with histidine and arginine. These identified peptide fractions derived from black bean protein can therefore be employed for food fortification acting as natural antioxidant alternatives.

Effect of lipids complexes on controlling ethylene gas release from V-type starch.

In this study, the effects of n-decanoic acid (n-CA) or coconut oil (CCN) on the release of ethylene from V-type starch (VS) were investigated. Results of differential scanning calorimetry showed that adding n-CA or CCN into VS generated a starch-lipid complex. Results of scanning electron microscopy and confocal laser scanning microscopy indicated that VS granules aggregated but oil films appeared on the surface of the VS aggregates when oil was added. The addition of n-CA or CCN effectively delayed the release of ethylene in VS, and the deceleration effect gradually became obvious with the increase in oil addition. These results suggest that the formation of starch-lipid complexes, the aggregation of starch granules, and the presence of oil films play important roles in slowing down the release of ethylene.

Characteristics and feasibility of olive oil-based diacylglycerol plastic fat for use in compound chocolate.

With an aim to prepare the healthier functional chocolate, olive oil-based diacylglycerol plastic fat (ODAGP) was prepared by mixing olive oil-based diacylglycerol stearin (O-DAGS) and olive oil-based diacylglycerol olein (O-DAGO) as confectionery fat in compound chocolate. We reported the physicochemical properties of ODAGP and ODAGP-CB blends, and then evaluated their application potential in compound chocolate based on sensory, blooming property and polymorphic transition. ODAGP (40% O-DAGS) showed a wide plastic range (7.1-45.2%) and high component compatibility. The crystal properties results indicated that ODAGP mainly existed in stable ß-forms (ß1 and ß2). On the other hand, the ODAGP-CB binary system containing 10-40% ODAGP displayed similar melt-in-mouth property and crystal polymorphism (Form V) to natural CB. Compound chocolate prepared with ODAGP-CB blends obtained satisfactory overall acceptability (score > 7.8) and showed stronger fat bloom resistance.

Production of Cocoa Butter Substitute via Enzymatic Interesterification of Fully Hydrogenated Palm Kernel Oil, Coconut Oil and Fully Hydrogenated Palm Stearin Blends.

This research synthesized structure lipids (SL) from blends of fully hydrogenated palm kernel oil (FHPKO), coconut oil (CNO) and fully hydrogenated palm stearin (FHPS) by enzymatic interesterification (EIE)using rProROL, an sn-1,3-specific lipase from Rhizopus oryzae, as a catalyst. Five physical blends of FHPKO:CNO:FHPS were prepared with the following wt. ratios: 40:10:50, 50:10:40, 60:10:30, 70:10:20 and 80:10:10. The EIE reactions were carried out at 60℃ for 6 h in a batch-type reactor using rProROL 10% wt. of the substrate. It was found that EIE significantly modified the triacylglycerol compositions of the fat blends resulting in changes in the crystallization and melting behavior. In particular, SL obtained from EIE of blend 70:10:20 exhibited high potential to be used as a cocoa butter substitute (CBS) because it showed similar solid fat content curve to the commercial CBS and crystallized into fine spherulites and desirable ß' polymorph.

Crystal network structure and stability of beeswax-based oleogels with different polyunsaturated fatty acid oils.

The effect of different types of oils including camellia oil (CLO), sunflower oil (SFO), corn oil (CO) and linseed oil (LO) on the formation, crystal network structure and mechanical properties of 4%wt beeswax (BW) in oleogel was investigated. BW oleogels containing oils with higher contents of polyunsaturated fatty acids gelled first (1%wt), especially LO with higher contents of linolenic acid rather than CLO with higher contents of monounsaturated fatty acids. In comparison, oils with higher polyunsaturated fatty acid contents exhibited higher Db with more extensive microstructure at different cooling rates, which was related to shorter nucleation induction time of crystal and higher crystallinity. Stronger van der Waals forces were observed in oleogels with higher polyunsaturated fatty acid contents especially for LO oleogel. Rheology also showed that LO oleogel with higher content of linolenic acid had higher crystallinity and lower crystal melting interfacial tension, resulting in the formation of a more stable network structure.

Application of Aqueous Saline Process to Extract Silkworm Pupae Oil (Bombyx mori): Process Optimization and Composition Analysis.

Silkworm pupae, a waste product from the silk production industry, can be an alternative source of edible oil, thus reducing the industry's waste. In the present work, frozen silkworm pupae were used as raw material to extract oil via an aqueous saline process. The Box-Behnken design (BBD) and response surface methodology (RSM) were used to optimize the extraction process. The extraction conditions with the highest oil yield and a low peroxide value were obtained when using a saline solution concentration of 1.7% w/v, a ratio of aqueous liquid to silkworm pupae of 3.3 mL/g, and a 119 min stirring time at the stirring speed of 100 rpm. Under these conditions, silkworm oil with a yield of 3.32%, peroxide values of approximately 1.55 mM, and an acid value of 0.67 mg KOH/g oil was obtained. The extracted oil contained omega-3 acids (α-linolenic acid), which constituted around 25% of the total fatty acids, with approximate cholesterol levels of 109 mg/100 g oil. The amounts of ß-carotene and α-tocopherol were approximately 785 and 9434 µg/100 g oil, respectively. Overall, the results demonstrated that oil extracted from silkworm pupae has good quality parameters and thus can be used as a new valuable source of edible lipids.

Deep-frying oil induces cytotoxicity, inflammation and apoptosis on intestinal epithelial cells.

BACKGROUND: Deep-frying oil has been found to cause inflammatory bowel disease (IBD). However, the molecular mechanism of the effect of deep-frying palm oil on IBD still remains undetermined. RESULTS: In the present study, bioinformatics and cell biology were used to investigate the functions and signal pathway enrichments of differentially expressed genes. The bioinformatics analysis of three original microarray datasets (GSE73661, GSE75214 and GSE126124) in the NCBI-Gene Expression Omnibus database showed 17 down-regulated genes (logFC < 0) and 2 up-regulated genes (logFC > 0) existed in the enteritis tissue. Meanwhile, pathway enrichment and protein-protein interaction network analysis suggested that IBD is relevant to cytotoxicity, inflammation and apoptosis. Furthermore, Caco-2 cells were treated with the main oxidation products of deep-frying oil-total polar compounds (TPC) and its components (polymerized triglyceride, oxidized triglycerides and triglyceride degradation products) isolated from deep-frying oil. The flow cytometry experiment revealed that TPC and its components could induce apoptosis, especially for oxidized triglyceride. A quantitative polymerase chain reaction analysis demonstrated that TPC and its component could induce Caco-2 cell apoptosis through AQP8/CXCL1/TNIP3/IL-1. CONCLUSION: The present study provides fundamental knowledge for understanding the effects of deep-frying oils on the cytotoxic and inflammatory of Caco-2 cells, in addition to clarifying the molecular function mechanism of deep-frying oil in IBD. © 2021 Society of Chemical Industry.

Influence of extraction technology on rapeseed oil functional quality: a study on rapeseed polyphenols.

Extraction technology can influence the vegetable oil functional quality. Polyphenols in rapeseed oil have been proved to be beneficial for cardiovascular health. In this study, we evaluated the effect of extraction methods on the functional quality of rapeseed oil from the perspective of phenolic compounds. The results showed that hot pressing produces the highest amount of phenolic compounds in rapeseed oil. Its most abundant phenolic compound, sinapine (9.18 µg g-1), showed the highest activity in inhibiting anaerobic choline metabolism with an EC50 value of 1.9 mM, whose downstream products are related to cardiovascular diseases. Molecular docking and molecular dynamics (MD) simulations revealed that sinapine exhibits good binding affinity toward CutC, and CutC-sinapine is a stable complex with fewer conformational fluctuations and similar tightness. Taken together, hot pressing can be considered the best extraction method for rapeseed oil from the perspective of phenolic compounds.

In Vitro Antiaging Evaluation of Sunscreen Formulated from Nanostructured Lipid Carrier and Tocotrienol-Rich Fraction.

Chronic exposure to ultraviolet (UV) radiation leads to photoaging. There is a tremendous rise in products having a dual activity of photoprotection and antiaging. In vitro analysis in dermal fibroblasts and their biological mechanisms involved are critical to determine antiaging potential. The study aimed to investigate the antiaging potential of sunscreen formulated from nanostructured lipid carrier and tocotrienol-rich fraction (NLC-TRF sunscreen). The antioxidant activity of the NLC-TRF sunscreen was evaluated by radical scavenging and hydrogen peroxide inhibition properties. Also, collagenase, elastase and matrix metalloproteinase-1 (MMP-1) inhibition activities, and type I collagen and elastin protein expression were studied. Quantitative real-time polymerase chain reaction (qPCR) was used to evaluate the mRNA expression of fibroblast growth factor (FGF), vascular endothelial growth factor (VEGF), transforming growth factor-ß1 (TGF-ß1), type I collagen (COL1A1), elastin (ELN), MMP-1, MMP-2, and tissue inhibitor matrix metalloproteinase-1 (TIMP-1). The results suggested that NLC-TRF sunscreen is effective in radical, anti-hydrogen peroxide, and collagenase, elastase and MMP-1 inhibition activities. Besides, a significant increase for type I collagen (3.47-fold) and elastin (2.16-fold) protein and fibroblast regeneration genes (FGF (2.12-fold), VEGF (1.91-fold), TGF-ß1 (2.84-fold), TIMP-1 (1.42-fold), ELN (2.13-fold)) were observed after sample treatment. These findings support the therapeutic potential of NLC-TRF sunscreen in antiaging.

A summary of 2-, 3-MCPD esters and glycidyl ester occurrence during frying and baking processes.

Monochloropropanediol (MCPD) esters and glycidyl esters (GE) are the process contaminants found in frying and baking, except the refining process. The free form MCPD and glycidol are released from their parent esters via lipase hydrolysis while they are carcinogen and genotoxic carcinogen, respectively. MCPD esters and GE are formed endogenously during vegetable oil refining process. Then, their concentration were experimented during subsequent food processing methods, especially frying and baking. This review discussed the occurrence of 2-, 3-MCPD esters and GE during frying and baking processes. Process temperature, process duration, presence of precursors, and their combined effects are highly related to MCPD esters and GE formations. An elevated temperature and processing time can increase the formation of these contaminants until an optimum rate and then followed by the decomposition. Also, other factors such as the presence of chloride ions, moisture, and partial acylglycerol can further facilitate MCPD esters and/or GE formation.