'Carbon-Monoxide-Releasing Molecule-2 (CORM-2)' Is a Misnomer: Ruthenium Toxicity, Not CO Release, Accounts for Its Antimicrobial Effects.

Carbon monoxide (CO)-releasing molecules (CORMs) are used to deliver CO, a biological 'gasotransmitter', in biological chemistry and biomedicine. CORMs kill bacteria in culture and in animal models, but are reportedly benign towards mammalian cells. CORM-2 (tricarbonyldichlororuthenium(II) dimer, Ru2Cl4(CO)6), the first widely used and commercially available CORM, displays numerous pharmacological, biochemical and microbiological activities, generally attributed to CO release. Here, we investigate the basis of its potent antibacterial activity against Escherichia coli and demonstrate, using three globin CO sensors, that CORM-2 releases negligible CO (<0.1 mol CO per mol CORM-2). A strong negative correlation between viability and cellular ruthenium accumulation implies that ruthenium toxicity underlies biocidal activity. Exogenous amino acids and thiols (especially cysteine, glutathione and N-acetyl cysteine) protected bacteria against inhibition of growth by CORM-2. Bacteria treated with 30 µM CORM-2, with added cysteine and histidine, exhibited no significant loss of viability, but were killed in the absence of these amino acids. Their prevention of toxicity correlates with their CORM-2-binding affinities (Cys, Kd 3 µM; His, Kd 130 µM) as determined by 1H-NMR. Glutathione is proposed to be an important intracellular target of CORM-2, with CORM-2 having a much higher affinity for reduced glutathione (GSH) than oxidised glutathione (GSSG) (GSH, Kd 2 µM; GSSG, Kd 25,000 µM). The toxicity of low, but potent, levels (15 µM) of CORM-2 was accompanied by cell lysis, as judged by the release of cytoplasmic ATP pools. The biological effects of CORM-2 and related CORMs, and the design of biological experiments, must be re-examined in the light of these data.

Chain-folded lamellar structure and dynamics of the crystalline fraction of Bombyx mori silk fibroin and of (Ala-Gly-Ser-Gly-Ala-Gly)n model peptides.

Solid-state NMR is a powerful analytical technique to determine the composite structure of Bombyx mori silk fibroin (SF). In our previous paper, we proposed a lamellar structure for Ala-Gly copolypeptides as a model of the crystalline fraction in Silk II. In this paper, the structure and dynamics of the crystalline fraction and of a better mimic of the crystalline fraction, (Ala-Gly-Ser-Gly-Ala-Gly)n (n = 2-5, 8), and 13C selectively labeled [3-13C]Ala-(AGSGAG)5 in Silk II forms, were studied using structural and dynamical analyses of the Ala Cß peaks in 13C cross polarization/ magic angle spinning NMR and 13C solid-state spin-lattice relaxation time (T1) measurements, respectively. Like Ala-Gly copolypeptides, these materials have lamellar structures with two kinds of Ala residues in ß-sheet, A and B, plus one distorted ß-turn, t, formed by repetitive folding using ß-turns every eighth amino acid in an antipolar arrangement. However, because of the presence of Ser residues at every sixth residue in (AGSGAG)n, the T1 values and mobilities of B decreased significantly. We conclude that the Ser hydroxyls hydrogen bond to adjacent lamellar layers and fix them together in a similar way to Velcro®.

A thiol-reactive Ru(II) ion, not CO release, underlies the potent antimicrobial and cytotoxic properties of CO-releasing molecule-3.

Carbon monoxide (CO)-releasing molecules (CORMs), mostly metal carbonyl compounds, are extensively used as experimental tools to deliver CO, a biological 'gasotransmitter', in mammalian systems. CORMs are also explored as potential novel antimicrobial drugs, effectively and rapidly killing bacteria in vitro and in animal models, but are reportedly benign towards mammalian cells. Ru-carbonyl CORMs, exemplified by CORM-3 (Ru(CO)3Cl(glycinate)), exhibit the most potent antimicrobial effects against Escherichia coli. We demonstrate that CORM-3 releases little CO in buffers and cell culture media and that the active antimicrobial agent is Ru(II), which binds tightly to thiols. Thus, thiols and amino acids in complex growth media - such as histidine, methionine and oxidised glutathione, but most pertinently cysteine and reduced glutathione (GSH) - protect both bacterial and mammalian cells against CORM-3 by binding and sequestering Ru(II). No other amino acids exert significant protective effects. NMR reveals that CORM-3 binds cysteine and GSH in a 1:1 stoichiometry with dissociation constants, Kd, of about 5 µM, while histidine, GSSG and methionine are bound less tightly, with Kd values ranging between 800 and 9000 µM. There is a direct positive correlation between protection and amino acid affinity for CORM-3. Intracellular targets of CORM-3 in both bacterial and mammalian cells are therefore expected to include GSH, free Cys, His and Met residues and any molecules that contain these surface-exposed amino acids. These results necessitate a major reappraisal of the biological effects of CORM-3 and related CORMs.

Ferrous Iron Binding Key to Mms6 Magnetite Biomineralisation: A Mechanistic Study to Understand Magnetite Formation Using pH Titration and NMR Spectroscopy.

Formation of magnetite nanocrystals by magnetotactic bacteria is controlled by specific proteins which regulate the particles' nucleation and growth. One such protein is Mms6. This small, amphiphilic protein can self-assemble and bind ferric ions to aid in magnetite formation. To understand the role of Mms6 during in vitro iron oxide precipitation we have performed in situ pH titrations. We find Mms6 has little effect during ferric salt precipitation, but exerts greatest influence during the incorporation of ferrous ions and conversion of this salt to mixed-valence iron minerals, suggesting Mms6 has a hitherto unrecorded ferrous iron interacting property which promotes the formation of magnetite in ferrous-rich solutions. We show ferrous binding to the DEEVE motif within the C-terminal region of Mms6 by NMR spectroscopy, and model these binding events using molecular simulations. We conclude that Mms6 functions as a magnetite nucleating protein under conditions where ferrous ions predominate.

Experimental evidence that the membrane-spanning helix of PufX adopts a bent conformation that facilitates dimerisation of the Rhodobacter sphaeroides RC-LH1 complex through N-terminal interactions.

The PufX polypeptide is an integral component of some photosynthetic bacterial reaction center-light harvesting 1 (RC-LH1) core complexes. Many aspects of the structure of PufX are unresolved, including the conformation of its long membrane-spanning helix and whether C-terminal processing occurs. In the present report, NMR data recorded on the Rhodobacter sphaeroides PufX in a detergent micelle confirmed previous conclusions derived from equivalent data obtained in organic solvent, that the α-helix of PufX adopts a bent conformation that would allow the entire helix to reside in the membrane interior or at its surface. In support of this, it was found through the use of site-directed mutagenesis that increasing the size of a conserved glycine on the inside of the bend in the helix was not tolerated. Possible consequences of this bent helical structure were explored using a series of N-terminal deletions. The N-terminal sequence ADKTIFNDHLN on the cytoplasmic face of the membrane was found to be critical for the formation of dimers of the RC-LH1 complex. It was further shown that the C-terminus of PufX is processed at an early stage in the development of the photosynthetic membrane. A model in which two bent PufX polypeptides stabilise a dimeric RC-LH1 complex is presented, and it is proposed that the N-terminus of PufX from one half of the dimer engages in electrostatic interactions with charged residues on the cytoplasmic surface of the LH1α and ß polypeptides on the other half of the dimer.

A polycystin-2 (TRPP2) dimerization domain essential for the function of heteromeric polycystin complexes.

Autosomal dominant polycystic kidney disease (ADPKD) is caused by mutations in two genes, PKD1 and PKD2, which encode polycystin-1 (PC1) and polycystin-2 (PC2), respectively. Earlier work has shown that PC1 and PC2 assemble into a polycystin complex implicated in kidney morphogenesis. PC2 also assembles into homomers of uncertain functional significance. However, little is known about the molecular mechanisms that direct polycystin complex assembly and specify its functions. We have identified a coiled coil in the C-terminus of PC2 that functions as a homodimerization domain essential for PC1 binding but not for its self-oligomerization. Dimerization-defective PC2 mutants were unable to reconstitute PC1/PC2 complexes either at the plasma membrane (PM) or at PM-endoplasmic reticulum (ER) junctions but could still function as ER Ca(2+)-release channels. Expression of dimerization-defective PC2 mutants in zebrafish resulted in a cystic phenotype but had lesser effects on organ laterality. We conclude that C-terminal dimerization of PC2 specifies the formation of polycystin complexes but not formation of ER-localized PC2 channels. Mutations that affect PC2 C-terminal homo- and heteromerization are the likely molecular basis of cyst formation in ADPKD.

Redox-responsive in vitro modulation of the signalling state of the isolated PrrB sensor kinase of Rhodobacter sphaeroides NCIB 8253.

Prr is a global regulatory system that controls a large and diverse range of genes in Rhodobacter sphaeroides in response to changing conditions of environmental redox potential. PrrB is the membrane-bound sensor kinase and previously we showed that the purified, detergent-solubilised intact membrane protein is functional in autophosphorylation, phosphotransfer and phosphatase activities. Here we confirm that it also senses and responds directly to its environmental signal, redox potential; strong autophosphorylation of PrrB occurred in response to dithiothreitol (DTT)-induced reducing conditions (and levels increased in response to a wide 0.1-100 mM DTT range), whilst under oxidising conditions, PrrB exhibited low, just detectable levels of autophosphorylation. The clear response of PrrB to changes in reducing conditions confirmed its suitability for in vitro studies to identify modulators of its phosphorylation signalling state, and was used here to investigate whether PrrB might sense more than one redox-related signal, such as signals of cell energy status. NADH, ATP and AMP were found to exert no detectable effect on maintenance of the PrrB-P signalling state. By contrast, adenosine diphosphate produced a very strong increase in PrrB-P dephosphorylation rate, presumably through the back-conversion of PrrB-P to PrrB.

Creaming in black tea.

Tea cream is the precipitate formed as tea cools. Its formation has been studied by X-ray scattering, and it is shown that a higher tea concentration leads to earlier onset of creaming and larger particles and that addition of theaflavin and calcium promotes creaming. Association constants between the major components of black tea have been obtained using NMR and show that calcium and glucose enhance the self-association of caffeine, polyphenols, and theaflavin but have little effect on hetero-association. Glycosylation of a polyphenol reduced self-association and reduced binding to caffeine. We conclude that theaflavin is important for the initiation of creaming, forming nanoclusters of typically 3 nm diameter, whereas caffeine acts more to fill in the gaps within the clusters and thus adds to the bulk of tea cream without being necessary for its initiation. Tea creaming may be reduced by increasing the solubility of the polyphenols (i.e., by glycosylation) or by removing calcium. Tea cream; theaflavin; caffeine; small-angle X-ray scattering; NMR; colloid.

The solution structure of bovine pancreatic trypsin inhibitor at high pressure.

The solution structure of bovine pancreatic trypsin inhibitor (BPTI) at a pressure of 2 kbar is presented. The structure was calculated as a change from an energy-minimized low-pressure structure, using (1)H chemical shifts as restraints. The structure has changed by 0.24 A RMS, and has almost unchanged volume. The largest changes as a result of pressure are in the loop 10-16, which contains the active site of BPTI, and residues 38-42, which are adjacent to buried water molecules. Hydrogen bonds are compressed by 0.029 +/- 0.117 A, with the longer hydrogen bonds, including those to internal buried water molecules, being compressed more. The hydrophobic core is also compressed, largely from reduction of packing defects. The parts of the structure that have the greatest change are close to buried water molecules, thus highlighting the importance of water molecules as the nucleation sites for volume fluctuation of proteins in native conditions.

LytG of Bacillus subtilis is a novel peptidoglycan hydrolase: the major active glucosaminidase.

LytG (YubE) of Bacillus subtilis is a novel 32 kDa autolysin produced during vegetative growth under the control of Esigma(A) RNA polymerase. Muropeptide analysis of vegetative cells of B. subtilis revealed LytG to be the major glucosaminidase responsible for peptidoglycan structural determination during vegetative growth. Overexpression and purification of LytG allowed its biochemical characterization. Despite sequence homology suggesting muramidase activity, LytG is a novel glucosaminidase with exoenzyme activity and may form part of a novel family of autolysins. It is involved in cell division, lysis, and motility on swarm plates.

Multiple conformations of the proline-rich protein/epigallocatechin gallate complex determined by time-averaged nuclear Overhauser effects.

The structure of the complex between the heptapeptide Gln-Gly-Arg-Pro-Pro-Gln-Gly and the polyphenol (-)-epigallocatechin gallate (EGCG) has been determined using time-averaged nuclear Overhauser effects. Effective parameters for the force constant and time constant have been derived, allowing rapid and efficient calculation of structures that satisfy the input restraints. By using multiple start conformations, it is shown that conformational space is covered adequately and that the complex exists in one major conformation, in which the A ring of the EGCG is positioned over Pro5 and the D ring is over Pro4, with the B ring frequently close to the arginine side chain. Alternative conformations are also found, in which the prolines are almost always both involved in stacking interactions, with a strong preference for Pro4 to be involved. The structures are consistent with previous models for the interaction and suggest how precipitation of the complex could occur, which leads to the oral phenomenon of astringency. The method has promise as a general way of docking ligands onto receptors.

Polyphenol/peptide binding and precipitation.

Polyphenols are largely responsible for the astringency and "mouthfeel" of tea and wine by their interactions with basic salivary proline-rich proteins. Astringency arises from precipitation of polyphenol/peptide complexes, which is an important protective mechanism in animals that consume polyphenols. This paper presents biophysical studies of the interactions between chemically defined polyphenols and peptides. It is shown that intermolecular binding is dominated by stacking of polyphenolic rings onto planar hydrophobic surfaces and is strengthened by multiple cooperative binding of polyphenolic rings. Affinities weaken at higher temperatures and are unaffected by pH between pH 3.8 and 6.0. Measurements of self-diffusion rates for peptides with increasing concentrations of polyphenol demonstrate that peptides become increasingly coated with polyphenol. When the coating is sufficiently extensive to provide cooperative polyphenol bridges, the peptide dimerizes and precipitates. Light scattering measurements and electron microscopy indicate that the insoluble particles fall into two discrete size classes of ca. 80 and 500 nm diameter. The larger particles are favored at higher temperature and pH, suggesting that the particles are in a colloidal state, with the smaller particles being stabilized by charge repulsion between particles, and that precipitation of the complexes may be a phase separation process.