Effects of Ultraviolet (UV) on Degradation of Irgafos 168 and Migration of Its Degradation Products from Polypropylene Films.

The effects of ultraviolet (UV) irradiation on the degradation of Irgafos 168 and the migration of its two degradation products, 2,4-di-tert-butylphenol and tris(2,4-di-tert-butylphenyl)phosphate, from polypropylene (PP) were investigated. A blown film machine was used to extrude PP films containing Irgafos 168, the films were stored in the dark for 45 days, two UV treatments and sunlight exposure were applied to the films, and GC-MS was used for degradation and migration studies. Extrusion, storage, UV treatments, and sunlight exposure significantly affected concentrations of Irgafos 168 and the degradation products. 2,4-Di-tert-butylphenol was the major degradation product produced by UV irradiation, but tris(2,4-di-tert-butylphenyl)phosphate was the major degradation product produced by extrusion, storage, and sunlight exposure. The degradation products have no or little health risk, because migration study and threshold of toxicological concern (TTC) analysis show that experimental maximum migration of 2,4-di-tert-butylphenol and tris(2,4-di-tert-butylphenyl)phosphate are only 2 and 53% of the theoretical maximum migration amounts, respectively.

Cranberry Xyloglucan Structure and Inhibition of Escherichia coli Adhesion to Epithelial Cells.

Cranberry juice has been recognized as a treatment for urinary tract infections on the basis of scientific reports of proanthocyanidin anti-adhesion activity against Escherichia coli as well as from folklore. Xyloglucan oligosaccharides were detected in cranberry juice and the residue remaining following commercial juice extraction that included pectinase maceration of the pulp. A novel xyloglucan was detected through tandem mass spectrometry analysis of an ion at m/z 1055 that was determined to be a branched, three hexose, four pentose oligosaccharide consistent with an arabino-xyloglucan structure. Two-dimensional nuclear magnetic resonance spectroscopy analysis provided through-bond correlations for the α-L-Araf (1→2) α-D-Xylp (1→6) ß-D-Glcp sequence, proving the S-type cranberry xyloglucan structure. Cranberry xyloglucan-rich fractions inhibited the adhesion of E. coli CFT073 and UTI89 strains to T24 human bladder epithelial cells and that of E. coli O157:H7 to HT29 human colonic epithelial cells. SSGG xyloglucan oligosaccharides represent a new cranberry bioactive component with E. coli anti-adhesion activity and high affinity for type 1 fimbriae.

Evaluation of chlorine dioxide gas treatment to inactivate Salmonella enterica on mungbean sprouts.

Although freshly sprouted beans and grains are considered to be a source of nutrients, they have been associated with foodborne outbreaks. Sprouts provide good matrices for microbial localization and growth due to optimal conditions of temperature and humidity while sprouting. Also, the lack of a kill step postsprouting is a major safety concern. The objective of this work was to evaluate the effectiveness of chlorine dioxide gas treatment to reduce Salmonella on artificially inoculated mungbean sprouts. The effectiveness of gaseous chlorine dioxide (0.5 mg/liter of air) with or without tumbling (mechanical mixing) was compared with an aqueous chlorine (200 ppm) wash treatment. Tumbling the inoculated sprouts during the chlorine dioxide gas application for 15, 30, and 60 min reduced Salmonella populations by 3.0, 4.0, and 5.5 log CFU/g, respectively, as compared with 3.0, 3.0, and 4.0 log CFU/g reductions obtained without tumbling, respectively. A 2.0 log CFU/g reduction in Salmonella was achieved with an aqueous chlorine wash. The difference in microbial reduction between chlorine dioxide gas versus aqueous chlorine wash points to the important role of surface topography, pore structure, bacterial attachment, and/or biofilm formation on sprouts. These data suggested that chlorine dioxide gas was capable of penetrating and inactivating cells that are attached to inaccessible sites and/or are within biofilms on the sprout surface as compared with an aqueous chlorine wash. Consequently, scanning electron microscopy imaging indicated that chlorine dioxide gas treatment was capable of penetrating and inactivating cells attached to inaccessible sites and within biofilms on the sprout surfaces.

Release kinetics of tocopherol and quercetin from binary antioxidant controlled-release packaging films.

This paper investigated the feasibility of manipulating packaging polymers with various degrees of hydrophobicity to release two antioxidants, tocopherol and quercetin, at rates suitable for long-term inhibition of lipid oxidation in food. For example, one antioxidant can be released at a fast rate to provide short-term/intermediate protection, whereas the other antioxidant can be released at a slower rate to provide intermediate/long-term protection of lipid oxidation. Controlled-release packaging films containing tocopherol and quercetin were produced using ethylene vinyl alcohol (EVOH), ethylene vinyl acetate (EVA), low-density polyethylene (LDPE), and polypropylene (PP) polymers; the release of these antioxidants to 95% ethanol (a fatty food simulant) was measured using UV-vis spectrophotometry, and Fickian diffusion models with appropriate initial and boundary conditions were used to fit the data. For films containing only quercetin, the results show that the release of quercetin was much faster but lasted for a much shorter time for hydrophilic polymers (EVOH and EVA) than for hydrophobic polymers (LDPE and PP). For binary antioxidant films containing tocopherol and quercetin, the results show that tocopherol released more rapidly but for a shorter period of time than quercetin in LDPE and EVOH films, and the difference is more pronounced for LDPE films than EVOH films. The results also show the presence of tocopherol can accelerate the release of quercetin. Although none of the films produced is acceptable for long-term lipid oxidation inhibition, the study provides encouraging results suggesting that acceptable films may be produced in the future using polymer blend films.